Number of hits: 959
Source type
journals (949)
periodicals (10)
Journals - titles
Advances in production engineering and management (202)
Dynamic relationships management journal (148)
International journal of management, knowledge and learning (186)
Management (412)
Management in prodaja (3)
Slovenian report under the joint convention on the safety of spent fuel management and on the safety of radioactive waste management (6)
Journals - form
articles (794)
journals (158)
Language
english (661)
slovenian (314)
Date
2003- (1)
2006 (17)
2007 (33)
2008 (40)
2009 (35)
2010 (33)
2011 (27)
2012 (45)
2012- (1)
2013 (51)
2014 (71)
2015 (72)
2016 (77)
2017 (95)
2018 (49)
2019 (59)
2020 (53)
2021 (57)
2022 (40)
2023 (26)
2024 (33)
2025 (44)
Location
BM Consulting poslovno in podjetniško svetovanje Branko Žunec s.p. (3)
Društvo Slovenska akademija za management (149)
Mednarodna fakulteta za družbene in poslovne študije Celje (186)
Univerza na Primorskem, Fakulteta za management (412)
Univerza v Mariboru, Fakulteta za strojništvo (22)
Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (180)
Uprava RS za jedrsko varnost (7)
Content
Publisher
3M Consulting Branko Žunec (3)
Fakulteta za management (365)
Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (202)
Mednarodna fakulteta za družbene in poslovne študije (186)
Slovenian academy of management (149)
ToKnowPress (2)
University of Primorska Press (54)
Uprava Republike Slovenije za jedrsko varnost (7)
Rights
CC BY – Attribution (50)
CC BY-NC - Attribution, Non-Commercial (148)
CC BY-NC-ND - Attribution, Non-Commercial, No Derivatives (145)
CC BY-SA - Attribution, ShareAlike (223)
In Copyright (391)
Access
Public (959)
Search in (959)
Sort by:
A knowledge-based system for end mill selection
Contibutors: Prasad, K. (author) / Chakraborty, P. S. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2085 kB)
1. TXT document (56 kB)
Ženske v srednješolskem managementu
Contibutors: Mavrič, Fani (author)
Source: Management
Numbering: 2006, volume 1, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (122 kB)
1. TXT document (35 kB)
An overview and evaluation of quality-improvement methods from the manufacturing and supply-chain...
Contibutors: Radej, Blaž (author) / Drnovšek, Janko (author) / Begeš, Gaber (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (801 kB)
1. TXT document (46 kB)
Finite element method for optimum design selection of carport structures under multiple load cases
Contibutors: Özkal, F. M. (author) / Cakir, F. (author) / Arkun, A. K. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2626 kB)
1. TXT document (36 kB)
Globalni izzivi v svetovni industriji bele tehnike
Contibutors: Gošnik, Dušan (author)
Source: Management
Numbering: 2009, volume 4, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (120 kB)
1. TXT document (38 kB)
Laser cladding of Ti-6Al-4V alloy with vanadium carbide particles
Contibutors: El-Labban, H. F. (author) / Mahmoud, E. R. I. (author) / Al-Wadai, H. (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1961 kB)
1. TXT document (27 kB)
Parametric study of die sinking EDM process on AISI H13 tool steel using statistical techniques
Contibutors: Bose, G. K. (author) / Mahapatra, K. K. (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (738 kB)
1. TXT document (35 kB)
Students' perceptions of their business competences and entrepreneurial intention
Contibutors: Kakkonen, Marja-Liisa (author)
Source: Management
Numbering: 2011, volume 6, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (137 kB)
1. TXT document (45 kB)
Advances in production engineering and management (2016, volume 11, issue 4)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (14 MB)
1. TXT document (375 kB)
An integrated lean approach to Process Failure Mode and Effect Analysis (PFMEA)
Contibutors: Banduka, N. (author) / Veža, Ivica (author) / Bilić, Boženko (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2046 kB)
1. TXT document (41 kB)
Comparison of 3D scanned kidney stone model versus computer-generated models from medical images
Contibutors: Galeta, Tomislav (author) / Pakši, I. (author) / Šišić, D. (author) / Knežević, M. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1734 kB)
1. TXT document (34 kB)
Reconsidering production coordination
Contibutors: Gong, D. (author) / Tang, M. (author) / Liu, S. (author) / Li, Q. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (592 kB)
1. TXT document (34 kB)
The application of service robots for logistics in manufacturing processes
Contibutors: Karabegović, Isak (author) / Karabegović, Edina (author) / Mahmić, Mehmed (author) / Husak, Ermin (author)
Source: Advances in production engineering and management
Numbering: 2015, volume 10, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1820 kB)
1. TXT document (31 kB)
Benchmarking and quality of small hotels in Croatia
Contibutors: Milohnić, Ines (author) / Cerović, Zdenko (author)
Source: Management
Numbering: 2007, volume 2, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (94 kB)
1. TXT document (23 kB)
An integrated generalized discriminant analysis method and chemical reaction support vector machi...
Contibutors: Nguyen, V. H. (author) / Cheng, J. S. (author) / Thai, V. T. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (808 kB)
1. TXT document (49 kB)
Advances in production engineering & management (2015, volume 10, issue 2)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (6956 kB)
1. TXT document (168 kB)
Work sampling for the production development
Contibutors: Martinec, Tomislav (author) / Škec, Stanko (author) / Savšek, Tomaž (author) / Perišić, M. M. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1190 kB)
1. TXT document (50 kB)
Visual and optometric issues with smart glasses in Industry 4.0 working environment
Contibutors: Vujica-Herzog, Nataša (author) / Buchmeister, Borut (author) / Beharić, Amer (author) / Gajšek, Brigita (author)
Source: Advances in production engineering and management
Numbering: 2018, volume 13, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (627 kB)
1. TXT document (45 kB)
Vpliv kakovosti vladanja na gospodarsko rast
Contibutors: Redek, Tjaša (author) / Godnov, Uroš (author)
Source: Management
Numbering: 2007, volume 2, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (148 kB)
1. TXT document (36 kB)
Konkurenca ne poteka več med podjetji, temveč med posameznimi oskrbnimi verigami
Contibutors: Kavčič, Klemen (author)
Source: Management
Numbering: 2006, volume 1, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (112 kB)
1. TXT document (29 kB)
Raziskava marketinga, Dušan Radonjič in Matjaž Iršič
Contibutors: Devetak, Gabrijel (author)
Source: Management
Numbering: 2007, volume 2, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (61 kB)
1. TXT document (6 kB)
Management (2007, volume 2, issue 2)
Source: Management
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (672 kB)
1. TXT document (200 kB)
Prediction of surface roughness in the ball-end milling process using response surface methodolog...
Contibutors: Sekulić, Milenko (author) / Pejić, Vlastimir (author) / Brezočnik, Miran (author) / Gostimirović, Marin (author) / Hadžistević, Miodrag (author)
Source: Advances in production engineering and management
Numbering: 2018, volume 13, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (818 kB)
1. TXT document (44 kB)
Model finančne ocene premoženja blagovnih znamk z uporabo vedenjskih dejavnikov
Contibutors: Bratina, Danjel (author)
Source: Management
Numbering: 2007, volume 2, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (130 kB)
1. TXT document (36 kB)
Scheduling batches in multi hybrid cell manufacturing system considering worker resources
Contibutors: Yilmaz, O. F. (author) / Cevikcan, E. (author) / Durmuşoglu, M. Bülent (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1043 kB)
1. TXT document (53 kB)
Koncept oskrbne verige
Contibutors: Kavčič, Klemen (author) / Bratina, Danjel (editor)
Source: Management
Numbering: 2008, volume 3, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (112 kB)
1. TXT document (34 kB)
Primer izpeljave analize besedila v kvalitativni raziskavi
Contibutors: Roblek, Vasja (author)
Source: Management
Numbering: 2009, volume 4, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (121 kB)
1. TXT document (35 kB)
Predictive analysis of criterial yield during travelling wire electrochemical discharge machining...
Contibutors: Mitra, N. S. (author) / Doloi, B. (author) / Bhattacharyya, B. (author)
Source: Advances in production engineering and management
Numbering: 2015, volume 10, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (643 kB)
1. TXT document (39 kB)
Advances in production engineering & management (2018, volume 13, issue 3)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. 229859072_2018_13_03 (11 MB)
1. TXT document (432 kB)
229859072_2018_13_03 (421 kB)
Tourism development
Contibutors: Brezovec, Tomi (author) / Bruce, David (author)
Source: Management
Numbering: 2009, volume 4, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (105 kB)
1. TXT document (33 kB)
Advances in production engineering & management (2020, volume 15, issue 1)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (12 MB)
1. TXT document (408 kB)
Interdisciplinarnost omrežja medpodjetniških odnosov
Contibutors: Konda, Iva (author)
Source: Management
Numbering: 2009, volume 4, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (141 kB)
1. TXT document (48 kB)
Analiza dejavnikov ustanavljanja podjetja
Contibutors: Kušče, Irena (author) / Gomezelj Omerzel, Doris (author)
Source: Management
Numbering: 2011, volume 6, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (129 kB)
1. TXT document (43 kB)
Ekonomski dejavniki gledanosti televizijskih programov v Sloveniji
Contibutors: Dodič, Matjaž (author) / Nastav, Bojan (author)
Source: Management
Numbering: 2011, volume 6, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (139 kB)
1. TXT document (43 kB)
Learning mixture models for classification with energy combination
Contibutors: Tsou, Chi-Ming (author) / Chen, Chuan (author) / Huang, Deng-Yuan (author)
Source: Management
Numbering: 2007, volume 2, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (108 kB)
1. TXT document (26 kB)
Advances in production engineering & management (2015, volume 10, issue 3)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (8290 kB)
1. TXT document (147 kB)
Consideration of a buyback contract model that features game-leading marketing strategies
Contibutors: He, H. (author) / Jian, M. (author) / Fang, X. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (519 kB)
1. TXT document (27 kB)
Financiranje podjetniških mrež s tveganim kapitalom
Contibutors: Robnik, Lidija (author)
Source: Management
Numbering: 2006, volume 1, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (126 kB)
1. TXT document (35 kB)
Advances in production engineering & management (2017, volume 12, issue 3)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (12 MB)
1. TXT document (283 kB)
Pomembnost ugotavljanja pravilnih vzrokov za nastanek podjetniške krize
Contibutors: Dubrovski, Drago (author)
Source: Management
Numbering: 2010, volume 5, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (111 kB)
1. TXT document (40 kB)
Laž in laganje
Contibutors: Karačić, Marija (author)
Source: Management
Numbering: 2009, volume 4, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (109 kB)
1. TXT document (34 kB)
Performance modelling based on value analysis for improving product development process architecture
Contibutors: Yin, F. P. (author) / Gao, Qianying (author) / Ji, X. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (858 kB)
1. TXT document (40 kB)
Online corporate learning in the Serbian market
Contibutors: Zočević, Vladimir (author) / Krneta, Radojka (author)
Source: Management
Numbering: 2011, volume 6, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (111 kB)
1. TXT document (38 kB)
Od Taylorja do Druckerja
Contibutors: Turk, Primož (author)
Source: Management
Numbering: 2008, volume 3, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (126 kB)
1. TXT document (43 kB)
Trust management
Contibutors: Paliszkiewicz, Joanna Olga (author)
Source: Management
Numbering: 2011, volume 6, issue 4
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (125 kB)
1. TXT document (40 kB)
Management (2010, volume 5, issue 4)
Source: Management
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (6340 kB)
1. TXT document (223 kB)
Solving dual flexible job-shop scheduling problem using a Bat Algorithm
Contibutors: Xu, H. (author) / Bao, Z. R. (author) / Zhang, Tao (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (528 kB)
1. TXT document (38 kB)
Strošek lastniškega kapitala podjetja
Contibutors: Stubelj, Igor (author)
Source: Management
Numbering: 2009, volume 4, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (135 kB)
1. TXT document (43 kB)
Vključevanje zaposlenih v inoviranje kot vir trajne konkurenčne prednosti
Contibutors: Fatur, Peter (author) / Likar, Borut (author)
Source: Management
Numbering: 2009, volume 4, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (114 kB)
1. TXT document (36 kB)
A general approach to optimize disassembly sequence planning based on disassembly network
Contibutors: Yu, B. (author) / Wu, E. (author) / Chen, C. (author) / Yang, Y. (author) / Yao, B. Z. (author) / Lin, Q. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1261 kB)
1. TXT document (44 kB)
Building corporate reputation through corporate governance
Contibutors: Ljubojević, Čedomir (author) / Ljubojević, Gordana (author)
Source: Management
Numbering: 2008, volume 3, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (95 kB)
1. TXT document (30 kB)
Drilling process optimization by using fuzzy-based multi-response surface methodology
Contibutors: Boyaci, A. I. (author) / Hatipoglu, T. (author) / Balci, Erhan (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (639 kB)
1. TXT document (30 kB)
Marketing management, Gabrijel Devetak
Contibutors: Bojnec, Štefan (author)
Source: Management
Numbering: 2007, volume 2, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (61 kB)
1. TXT document (6 kB)
Concept of intelligent supporting information system for development of new appliances
Contibutors: Ogrizek, Boštjan (author) / Rehar, Tomaž (author) / Leber, Marjan (author) / Buchmeister, Borut (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (694 kB)
1. TXT document (33 kB)
Simultaneous determination of production and shipment decisions for a multi-product inventory sys...
Contibutors: Chiu, Y. P. (author) / Chiang, K.-W. (author) / Chiu, S. W. (author) / Song, M.-S. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1391 kB)
1. TXT document (33 kB)
Ravnateljice skozi paradigmo moči in spolne zavesti
Contibutors: Žuraj Balog, Alenka (author)
Source: Management
Numbering: 2007, volume 2, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (110 kB)
1. TXT document (34 kB)
Vpliv organizacijske kulture in upravljanja z znanjem na uspešnost razvoja novih finančnih storitev
Contibutors: Nekrep, Mojca (author)
Source: Management
Numbering: 2010, volume 5, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (108 kB)
1. TXT document (36 kB)
Production monitoring system for understanding product robustness
Contibutors: Boorla, S. M. (author) / Howard, T. J. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1758 kB)
1. TXT document (41 kB)
Proces organizacijskega učenja v slovenskih, hrvaških in malezijskih podjetjih
Contibutors: Dimovski, Vlado (author) / Škerlavaj, Miha (author) / Kimman, Mok (author) / Hernaus, Tomislav (author)
Source: Management
Numbering: 2006, volume 1, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (112 kB)
1. TXT document (32 kB)
Composition of the boards of Polish joint stock companies
Contibutors: Pawlak, Marek (author)
Source: Management
Numbering: 2007, volume 2, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (130 kB)
1. TXT document (24 kB)
Management (2008, volume 3, issue 4)
Source: Management
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (25 MB)
1. TXT document (222 kB)
Skupnost Moodle v Sloveniji
Contibutors: Sulčič, Viktorija (author)
Source: Management
Numbering: 2007, volume 2, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (72 kB)
1. TXT document (13 kB)
Advances in production engineering & management (2018, volume 13, issue 4)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. 229859072_2018_13_04 (12 MB)
1. TXT document (417 kB)
Obstoj vrzeli lastniškega kapitala v Sloveniji
Contibutors: Vadnjal, Jaka (author) / Letonja, Marina (author)
Source: Management
Numbering: 2008, volume 3, issue 4
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (120 kB)
1. TXT document (43 kB)
The relationship between distinctive capabilities, strategy types, environment and the export per...
Contibutors: Mok Kim Man, Mandy (author)
Source: Management
Numbering: 2009, volume 4, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (127 kB)
1. TXT document (45 kB)
Izzivi globalizacije v svetovni farmacevtski industriji
Contibutors: Kesič, Dragan (author)
Source: Management
Numbering: 2007, volume 2, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (131 kB)
1. TXT document (37 kB)
A Petri net model for the integration of purchasing, production and packaging using Kanban system
Contibutors: Ullah, H. (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (724 kB)
1. TXT document (42 kB)
Advances in production engineering and management (2015, volume 10, issue 4)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (12 MB)
1. TXT document (190 kB)
The current intellectual property debate
Contibutors: Linder, Christian (author) / Seidenstricker, Sven (author)
Source: Management
Numbering: 2011, volume 6, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (149 kB)
1. TXT document (56 kB)
A combined zone-LP and simulated annealing algorithm for unequal-area facility layout problem
Contibutors: Xiao, Y. J. (author) / Zheng, Y. (author) / Zhang, Li- Ming (author) / Kuo, Y. H. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (713 kB)
1. TXT document (38 kB)
Applying multi-phase particle swarm optimization to solve bulk cargo port scheduling problem
Contibutors: Tang, M. (author) / Gong, D. (author) / Liu, S. (author) / Zhang, Hankun (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (563 kB)
1. TXT document (37 kB)
Dodana vrednost: ali informacije o njej dopolnjujejo tiste o dobičku podjetja?
Contibutors: Buležan, Aleš (author)
Source: Management
Numbering: 2008, volume 3, issue 4
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (92 kB)
1. TXT document (25 kB)
Vehicle scheduling based on plant growth simulation algorithm and distribution staff behavior
Contibutors: Ren, X. Y. (author) / Kong, Z. F. (author) / Liang, W. C. (author) / Li, H. C. (author) / Zhou, X. Y. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (732 kB)
1. TXT document (39 kB)
Vpliv prenove poslovanja na zadovoljstvo odjemalcev
Contibutors: Januš, Tina (author) / Manzin, Massimo (author)
Source: Management
Numbering: 2008, volume 3, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (114 kB)
1. TXT document (34 kB)
Genetic programming method for modelling of cup height in deep drawing process
Contibutors: Gusel, Leo (author) / Boskovic, V. (author) / Domitner, J. (author) / Ficko, Mirko (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2018, volume 13, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (585 kB)
1. TXT document (28 kB)
Advances in production engineering and management (2016, volume 11, issue 2)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (10 MB)
1. TXT document (233 kB)
Komunikacija v virtualni učilnici
Contibutors: Sulčič, Alja (author)
Source: Management
Numbering: 2007, volume 2, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (119 kB)
1. TXT document (32 kB)
Dejavniki uspešnosti mediacije v sodnih sporih
Contibutors: Sekirnik, Tanja (author) / Biloslavo, Roberto (author)
Source: Management
Numbering: 2009, volume 4, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (125 kB)
1. TXT document (41 kB)
Diagnostic of peripheral longitudinal grinding by using acoustic emission signal
Contibutors: Zylka, L. (author) / Burek, Jan (author) / Mazur, D. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2262 kB)
1. TXT document (38 kB)
Quantifying the robustness of process manufacturing concept - a medical product case study
Contibutors: Boorla, S. M. (author) / Troldtoft, M. E. (author) / Eifler, T. (author) / Howard, T. J. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1289 kB)
1. TXT document (39 kB)
Strategija za vzpostavitev in vodenje managersko-podjetniške mreže
Contibutors: Roblek, Vasja (author)
Source: Management
Numbering: 2007, volume 2, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (137 kB)
1. TXT document (44 kB)
Infrared temperature measurement and increasing infrared measurement accuracy in the context of m...
Contibutors: Masoudi, S. (author) / Gholami, M. A. (author) / Janghorban Iariche, M. (author) / Vafadar, A. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2101 kB)
1. TXT document (34 kB)
Management (2010, volume 5, issue 2)
Source: Management
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (24 MB)
1. TXT document (209 kB)
Advances in production engineering and management (2017, volume 12, issue 1)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (7947 kB)
1. TXT document (317 kB)
Optimal fractal dimension on grain structure robot laser-hardened tool steel
Contibutors: Babič, Matej (author) / Balič, Jože (author) / Kokol, Peter (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1412 kB)
1. TXT document (22 kB)
Priznavanje znanja, pridobljenega z neformalnim in izkustvenim učenjem
Contibutors: Gomezelj Omerzel, Doris (author) / Trunk Širca, Nada (author)
Source: Management
Numbering: 2006, volume 1, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (126 kB)
1. TXT document (40 kB)
Evalvacija šolskega matematičnega tekmovanja Kenguru
Contibutors: Komel, Barbara (author)
Source: Management
Numbering: 2009, volume 4, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (104 kB)
1. TXT document (29 kB)
A grey-fuzzy approach for optimizing machining parameters and the approach angle in turning AISI ...
Contibutors: Senthilkumar, N. (author) / Sudha, J. (author) / Muthukumar, V. (author)
Source: Advances in production engineering and management
Numbering: 2015, volume 10, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1891 kB)
1. TXT document (45 kB)
Experimental and simulation study on the warm deep drawing of AZ31 alloy
Contibutors: Reddy, A. C. S. (author) / Rajesham, S. (author) / Reddy, P. R. (author)
Source: Advances in production engineering and management
Numbering: 2015, volume 10, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (581 kB)
1. TXT document (26 kB)
Surface roughness assessing based on digital image features
Contibutors: Šimunović, Goran (author) / Svalina, I. (author) / Simunovic, K. (author) / Šarić, Tomislav (author) / Havrlisan, S. (author) / Vukelić, Djordje (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1425 kB)
1. TXT document (41 kB)
Advances in production engineering & management (2017, volume 12, issue 4)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (11 MB)
1. 229859072_2017_12_04 (376 kB)
Uporaba poslovnega načrta v 500 najhitreje rastočih slovenskih podjetjih
Contibutors: Krajnik, Marjan (author)
Source: Management
Numbering: 2007, volume 2, issue 3
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (118 kB)
1. TXT document (34 kB)
Napitnina: obdavčljivi ali neobdavčljivi del prihodkov zaposlenih
Contibutors: Raspor, Andrej (author)
Source: Management
Numbering: 2009, volume 4, issue 2
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (128 kB)
1. TXT document (43 kB)
Management (2011, volume 6, issue 3)
Source: Management
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (1063 kB)
1. TXT document (231 kB)
Empirično preverjanje modela povezav med poreklom izdelka in zaznano vrednostjo blagovne znamke
Contibutors: Vukasovič, Tina (author) / Bojnec, Štefan (author)
Source: Management
Numbering: 2010, volume 5, issue 4
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (128 kB)
1. TXT document (39 kB)
Stres, gibalna dejavnost, zdravstveno stanje in življenjski slog zaposlenih v Hitovi igralnici Park
Contibutors: Karpljuk, Damir (author) / Meško, Maja (author) / Videmšek, Mateja (author) / Mlinar, Suzana (author)
Source: Management
Numbering: 2009, volume 4, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (111 kB)
1. TXT document (33 kB)
Znamka I feel Slovenia
Contibutors: Konečnik Ruzzier, Maja (author) / Petek, Nuša (author) / Lapajne, Petra (author) / Milinović, Davorin (author)
Source: Management
Numbering: 2011, volume 6, issue 4
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (145 kB)
1. TXT document (43 kB)
Cutting performance of solid ceramic and carbide end milling tools in machining of nickel based a...
Contibutors: Grguraš, Damir (author) / Kern, M. (author) / Pušavec, Franci (author)
Source: Advances in production engineering and management
Numbering: 2019, volume 14, nr. 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2720 kB)
1. TXT document (38 kB)
Business environmental responsibility in the hospotality industry
Contibutors: Kasim, Azilah (author) / Scarlat, Cezar (author)
Source: Management
Numbering: 2007, volume 2, issue 1
Provider: Univerza na Primorskem, Fakulteta za management
1. PDF document (127 kB)
1. TXT document (45 kB)
Compatibility of ionic liquids with hydraulic system components
Contibutors: Kambič, Milan (author) / Kalb, Roland (author) / Tič, Vito (author) / Lovrec, Darko (author)
Source: Advances in production engineering and management
Numbering: 2018, volume 13, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (3510 kB)
1. TXT document (39 kB)
Realization, property and rights 2026 Narodna in univerzitetna knjižnica, Turjaška 1, 1000 Ljubljana