dLib.si - bit

Razpad alfa-AlB12 v zlitinah Al-B in Al-Ti-B

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

1. TXT document (20 kB)

Contibutors: Zupanič, Franc (author) / Spaić, Savo (author) / Križman, Alojz (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (192 kB)

Površinska obdelava orodij za hladno oblikovanje

Contibutors: Legat, Franc (author)

Ocena sanacije proizvodnih družb slovenskih železarn v obdobju 1993-1997

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (20 kB)

1. TXT document (7 kB)

Contibutors: Vodopivec, Franc (author)

Sinteza in karakterizacija sulfoniranega polianilina

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (84 kB)

1. TXT document (28 kB)

Contibutors: Mav Golež, Ida (author) / Žigon, Majda (author) / Šebenik, Anton (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (94 kB)

Študij sekundarnih interakcij v polarnih kavčukih z mehaničnimi sredstvi: primer mešanic CR/TPU

Contibutors: Dimitrievski, Ilija (author) / Šušterič, Zoran (author)

1. PDF document (1504 kB)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

Uporaba kisikove sonde pri kontroli in vodenju procesa izdelave jekla

Contibutors: Koroušić, Blaženko (author) / Godicelj, Tomaž (author) / Rozman, Alojz (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (102 kB)

Decarburization mechanism of Fe-Si-Al alloy with antimony addition

Contibutors: Steiner Petrovič, Darja (author) / Jenko, Monika (author) / Gontarev, Vasilij (author) / Grabke, Hans Jürgen (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (106 kB)

Energy and mass distributions of ions during depostition! of TiN by triode ion plating in BAI 730 M

Contibutors: Maček, Marijan (author) / Navinšek, Boris (author) / Panjan, Peter (author) / Kadlec, Stanislav (author)

Mezomorfne lastnosti 4-{omega-bis(2-hidroksietil)amino-alkoksi}-4'-metoksiazobenzenov

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (139 kB)

1. TXT document (19 kB)

Contibutors: Brecl, Marko (author) / Žigon, Majda (author) / Malavašič, Tatjana (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (340 kB)

Prepletene polimerne mreže za površinsko dodelavo usnja

Contibutors: Anžlovar, Alojz (author) / Anžur, Irena (author) / Malavašič, Tatjana (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (35 kB)

Razvoj postopka iztiskavanja kompozitov Al/SiC

Contibutors: Šuštaršič, Borivoj (author) / Doberšek, Mirko (author) / Breskvar, Bojan (author) / Torkar, Matjaž (author) / Kevorkijan, Varužan (author) / Dai, Sudradjat (author) / Smolej, Anton (author) / Nardin, Vladimir (author)

Popis različne stopnje hladne deformacije konstrukcijskega jekla na osnovi Barkhausnovega šuma

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (492 kB)

1. TXT document (41 kB)

Contibutors: Grum, Janez (author) / Pečnik, Boštjan (author) / Fefer, Dušan (author) / Žerovnik, Pavle (author)

Correlations between fatigue and variations in material constants of PLZT ceramics

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (119 kB)

1. TXT document (19 kB)

Contibutors: Levstik, Adrijan (author) / Bobnar, Vid (author) / Kutnjak, Zdravko (author) / Kosec, Marija (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (77 kB)

Characterization of hard protective coatings based on (Cr,Ta)N

Contibutors: Čekada, Miha (author) / Panjan, Peter (author) / Navinšek, Boris (author) / Cvelbar, Franc (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (118 kB)

Surface segregation studies of selenium on FeSiAl alloy

Contibutors: Jenko, Monika (author) / Fine, Joseph (author) / Mandrino, Đorđe (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (123 kB)

Uporaba niomola 490 K za gradnjo varjenih jeklenih rezervoarjev

Contibutors: Vojvodič-Tuma, Jelena (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (77 kB)

High coercivities in HDDR processed Sm-Fe-Ta-N magnets

Contibutors: Žužek Rožman, Kristina (author) / McGuiness, Paul J. (author) / Kobe, Spomenka (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (163 kB)

Ternarni sistem polisulfon-dimetilacetatamid : voda; formiranje membrane po mokrem postopku fazne...

Contibutors: Kaiser, Vladimir (author) / Stropnik, Črtomir (author)

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (769 kB)

PP filamentne preje izdelane z dodatkom lojevca

Contibutors: Demšar, Andrej (author) / Sluga, Franci (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (32 kB)

Obraba na členih elevatorske verige

Contibutors: Legat, Franc (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (188 kB)

Mikrostruktura in lastnosti površine nizko-ogljičnega jekla po obdelavi z laserjem

Contibutors: Spruk, Sonja (author) / Rodič, Alenka (author) / Praček, Borut (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (113 kB)

Detekcija majhnih napak v odkovkih in ulitkih z metodo ultrazvočne difrakcije

Contibutors: Dukić, Predrag (author) / Dukić, Ines (author) / Kmetič, Dimitrij (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (452 kB)

Setting times measurements of portland cements with pulsed USWR method

Contibutors: Valič, Marko (author) / Stepišnik, Janez (author) / Gabrijelčič, Magda (author) / Vuk, Tomaž (author) / Reščič, Lojzka (author)

Numbering: 1999, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (112 kB)

Alloy 31 - a high alloyed Ni-Cr-Mo-steel - properties and applications for the process industry

Contibutors: Mast, Ralph (author) / Rommerskirchen, I. (author) / Schambach, L. (author) / Brill, U. (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (158 kB)

Experimental study of steel behaviour in process of mushy state deformation

Contibutors: Horský, Jaroslav (author) / Raudenský, Miroslav (author) / Kotrbáček, Peter (author) / Šarler, Božidar (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (166 kB)

Možnosti za ponovno uporabo odpadnega stekla

Contibutors: Ducman, Vilma (author) / Kovačević, Mihaela (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (60 kB)

Zakaj poka jeklo pri kaljenju?

Contibutors: Legat, Franc (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (87 kB)

Nabrekanje glinenih zemljin

Contibutors: Daneu, Nina (author) / Mirtič, Breda (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

Reactive wetting between molten Al alloy and ceramic particles

Contibutors: Kevorkijan, Varužan (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (64 kB)

Calculation of the Curie temperature in the system Nd2Fe(17-x)Alx

Contibutors: Komelj, Matej (author) / Kobe, Spomenka (author)

Sinteza in karakterizacija poliakrilatnih disperzij kot vezivo za keramične materiale

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (56 kB)

1. TXT document (10 kB)

Contibutors: Klun, Urša (author) / Malavašič, Tatjana (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (86 kB)

Preskušanje materialov na odpornost proti utrujanju pri kotaljenju

Contibutors: Kalin, Mitjan (author) / Vižintin, Jože (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (59 kB)

Investigation of steel flow stress and plasticity at high temperatures

Contibutors: Golja, Marijan (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (292 kB)

Reakcije med anodnim materialom in materialom za vmesnik v visokotemperaturnih gorivnih celicah

Contibutors: Marinšek, Marjan (author) / Zupan, Klementina (author) / Maček, Jadran (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (245 kB)

Kontrolirana sinteza polimetilmetakrilata s fosforjevim iniciatorjem

Contibutors: Poljanšek, Ida (author) / Šebenik, Anton (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (58 kB)

Gelation of oilwell cement

Contibutors: Vuk, Tomaž (author) / Ljubič-Mlakar, Tanja (author) / Gabrovšek, Roman (author) / Kaučič, Venčeslav (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (38 kB)

Vpliv vakuumskega razplinjevanja polimerov na kontaktno upornost Ag kontaktov v hermetičnih relejih

Contibutors: Koller, Lidija (author) / Bizjak, Martin (author) / Požun, Karol (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (161 kB)

Vključitev matematičnega modela na realni objekt

Contibutors: Jaklič, Anton (author) / Kolenko, Tomaž (author) / Glogovac, Branislav (author) / Mikec, Darko (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (158 kB)

Razvoj vibracijskih miz za vgradnjo betona v kalupe

Contibutors: Čop, Rudi (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (52 kB)

Vpliv meje tečenja in temperature na odpornostne krivulje J-R jekel s povišano trdnostjo

Contibutors: Legat, Janko (author) / Gubeljak, Nenad (author) / Vojvodič-Tuma, Jelena (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (85 kB)

Flaw acceptability assessment detected in HSLA steel weld joints

Contibutors: Rak, Inoslav (author)

Razvojne usmeritve podjetja Salonit Anhovo, d.d.

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (341 kB)

1. TXT document (31 kB)

Contibutors: Ljubič-Mlakar, Tanja (author) / Reščič, Lojzka (author) / Pešič, Tatjana (author) / Terčič, Žarko (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (114 kB)

Analiza elektrokemijskega šuma, generiranega z različnimi korozijskimi procesi

Contibutors: Bajt Leban, Mirjam (author) / Doleček, Valter (author) / Legat, Andraž (author) / Kuhar, Viljem (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

Raziskovanje v javni RR sferi in inženirstvo

Contibutors: Vodopivec, Franc (author)

PP fibers spun with the addition of paraffin oil

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (36 kB)

1. TXT document (19 kB)

Contibutors: Demšar, Andrej (author) / Sluga, Franci (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (48 kB)

Determination of the solubility of Ce and La in BaTiO3 by quantitative WDS electron probe microan... (1995, volume 29, issue 1/2)

Contibutors: Samardžija, Zoran (author) / Makovec, Darko (author) / Kolar, Drago (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (526 kB)

Comparison of steel and aluminium behaviour as materials for rings and wheels

Contibutors: Vasiljevich Binkevich, Evgeny (author) / Shynkarenko, V.B. (author) / Vodopivec, Franc (author) / Mamuzić, I. (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (80 kB)

Analiza mikrostrukture kompozitov AlSi7-SiC, izdelanih po postopku tiksotropnega ulivanja

Contibutors: Rudolf, Rebeka (author) / Križman, Alojz (author)

Značilnosti kontinuirno ulitih kompozitov Al/SiC

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (220 kB)

1. TXT document (28 kB)

Contibutors: Šuštaršič, Borivoj (author) / Torkar, Matjaž (author) / Breskvar, Bojan (author) / Kevorkijan, Varužan (author) / Smolej, Anton (author) / Nardin, Vladimir (author)

Probability function of fatigue crack growth in case of material overloading

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (161 kB)

1. TXT document (25 kB)

Contibutors: Gubeljak, Nenad (author) / Legat, Janko (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (73 kB)

Malociklična nosilnost pri ležajih z utrjeno kotalno površino

Contibutors: Kunc, Robert (author) / Prebil, Ivan (author) / Torkar, Matjaž (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (109 kB)

Študij napršenih tankih plasti platine na polimerno podlago

Contibutors: Požun, Karol (author) / Koller, Lidija (author) / Irmančnik-Belič, Lidija (author) / Remškar, Maja (author) / Praček, Borut (author) / Aljančič, Uroš (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (567 kB)

Characterization of Pd-Cu/gamma-Al2O3 catalysts by XPS and catalytic measurements

Contibutors: Batista, Jurka (author) / Pintar, Albin (author) / Mandrino, Đorđe (author) / Jenko, Monika (author)

Računalniško dimenzioniranje betona z določeno prostorninsko maso

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (103 kB)

1. TXT document (24 kB)

Contibutors: Čop, Rudi (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (56 kB)

Optimizacija kopolimerizacije akrilatov v emulziji

Contibutors: Lamovec, Vlasta (author) / Šebenik, Anton (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (100 kB)

Kontinuirna peč za žarjenje valjanih profilov v zaščitni atmosferi

Contibutors: Lipuš, Alain (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (54 kB)

Izdelava plastomagnetov NdFeB z injekcijskim brizganjem

Contibutors: Šuštaršič, Borivoj (author) / Kobe, Spomenka (author) / Saje, Boris (author)

Weld joint fracture behaviour of HSLA steels dissimilar in strength

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (342 kB)

1. TXT document (33 kB)

Contibutors: Rak, Inoslav (author) / Treiber, Arpad (author)

Characterization of hard Ti-W-N films deposited by reactive d.c. magnetron sputtering

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (129 kB)

1. TXT document (28 kB)

Contibutors: Shaginyan, Leonid R. (author) / Mišina, Martin (author) / Musil, Jindřich (author) / Regent, Filip (author)

Karakterizacija Zn-Ni-Ti-O keramike (1995, volume 29, issue 5/6)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (163 kB)

1. TXT document (20 kB)

Contibutors: Lisjak, Darja (author) / Zajc, Irena (author) / Drofenik, Mihael (author) / Kolar, Drago (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (553 kB)

Izgube materiala pri elektrouporovnem varjenju verižnih členov

Contibutors: Legat, Franc (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (48 kB)

Investigation on yield stress and strain ageing of structural steels

Contibutors: Vodopivec, Franc (author) / Vojvodič-Tuma, Jelena (author) / Lovrenčič-Saražin, M. (author)

Preiskave površine katod iz ionske črpalke

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (227 kB)

1. TXT document (27 kB)

Contibutors: Mozetič, Miran (author) / Praček, Borut (author) / Pregelj, Andrej (author) / Zorko, Benjamin (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (181 kB)

IR and X-ray photoelectron spectroscopy of V2O5, TiO2 and V/Ti-oxide sol-gel derived films

Contibutors: Mandrino, Đorđe (author) / Jenko, Monika (author) / Surca, Angelja Kjara (author) / Orel, Boris (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (127 kB)

Praktične izkušnje pri uporabi orodja za mrežno planiranje pri terminskem planiranju proizvodnje

Contibutors: Mrak, Marko (author) / Kern, Tomaž (author)

Makroskopski modeli dvofaznih materialov

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (84 kB)

1. TXT document (27 kB)

Contibutors: Kosec, Borut (author) / Kosel, Franc (author)

Vpliv toplotne obdelave na mikrostrukturo in trdoto jekla X20CrMoV121

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (154 kB)

1. TXT document (20 kB)

Contibutors: Skobir, Danijela (author) / Vodopivec, Franc (author) / Arzenšek, Boris (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (198 kB)

Effects of impurities in Alloy 800 on the grain boundary diffusion and high temperature creep

Contibutors: Lindemann, Janine (author) / Hennesen, K. (author) / Derder, C. (author) / Viefhaus, Helmut (author) / Grabke, Hans Jürgen (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (163 kB)

Merilnik namagnetenosti s tresočim se vzorcem (VSM)

Contibutors: Dimc, Franc (author) / Fefer, Dušan (author)

Modificirano numerično modeliranje lomnega vedenja zvarnega spoja v prehodnem področju iz duktiln...

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (158 kB)

1. TXT document (10 kB)

Contibutors: Kozak, Dražan (author) / Gubeljak, Nenad (author) / Rak, Inoslav (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (167 kB)

Notranja oksidacija zlitin srebra z žveplom

Contibutors: Horvat Kovačič, Saša (author) / Kosec, Ladislav (author)

Specifična poraba toplote kot funkcija storilnosti potisne peči

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (86 kB)

1. TXT document (10 kB)

Contibutors: Kolenko, Tomaž (author) / Glogovac, Branislav (author) / Jaklič, Anton (author) / Mikec, Darko (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (57 kB)

Naprševanje platine na polimerno podlago

Contibutors: Požun, Karol (author) / Koller, Lidija (author) / Irmančnik-Belič, Lidija (author) / Remškar, Maja (author) / Praček, Borut (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (140 kB)

Razpoke odkrite pri medobratovalnem pregledu reaktorske posode in ocena njihove sprejemljivosti

Contibutors: Korošec, Darko (author) / Vojvodič-Tuma, Jelena (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (56 kB)

A study of hydration of cement pastes by reflection of ultrasonic shear waves

Contibutors: Valič, Marko (author) / Stepišnik, Janez (author)

Operational aspects of experiences in vacuum technology by production of high quality stainless a... (1995, volume 29, issue 3/4)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (131 kB)

1. TXT document (49 kB)

Contibutors: Koroušić, Blaženko (author) / Rozman, A. (author) / Triplat, J. (author) / Lamut, Jakob (author)

1. PDF document (1143 kB)

Provider: Inštitut za kovinske materiale in tehnologije

Pomen poznanja toplotnih in elastičnih lastnosti naravnega kamna pri uporabi v gradbeništvu

Contibutors: Mladenovič, Ana (author) / Vižintin, Nada (author) / Mirtič, Breda (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (164 kB)

Rare earth perovskite-type oxides as gas sensors

Contibutors: Gusmano, Gualtiero (author) / Traversa, Enrico (author)

Določitev malociklične nosilnosti kotalnega stika

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (107 kB)

1. TXT document (29 kB)

Contibutors: Kunc, Robert (author) / Prebil, Ivan (author) / Torkar, Matjaž (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (247 kB)

Opredelitev poliuretanov z izključitveno kromatografijo

Contibutors: Žagar, Ema (author) / Žigon, Majda (author) / Malavašič, Tatjana (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (58 kB)

Študij kompatibilnosti anodnega materiala in elektrolita za visokotemperaturne gorivne celice

Contibutors: Marinšek, Marjan (author) / Maček, Jadran (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (76 kB)

Fatigue properties of low carbon steel strengthened by static or dynamic work hardening

Contibutors: Michel, Ján (author) / Hidvéghy, J. (author) / Mamuzić, Ilija (author) / Bursák, M. (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (187 kB)

Vloga Inštituta za kovinske materiale in tehnologije pri remontnih delih v JE Krško (1995, volume 29, issue 5/6)

Contibutors: Vojvodič-Tuma, Jelena (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (682 kB)

Influence of higher manganese content in hot metal on lining

Contibutors: Pihura, Derviš (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (62 kB)

Measurement of strain caused by residual stresses in a welded joint using neutron diffraction

Contibutors: Gubeljak, Nenad (author) / Vojvodič-Tuma, Jelena (author) / Preismeyer, Hans-Georg (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (229 kB)

Vpliv laserskega površinskega pretaljevanja na zaostale napetosti v tankih ploščah

Contibutors: Grum, Janez (author) / Šturm, Roman (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (64 kB)

Analiza vpliva orientacije ojačitvenih vlaken na natezne lastnosti večplastnih polimernih kompozitov

Contibutors: Lavrič, Aleš (author) / Emri, Igor (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (135 kB)

Izdelava posebnega betona iz metalurških odpadkov težkih kovin

Contibutors: Čop, Rudi (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (50 kB)

Raztapljanje silicija v podevtektični tiksotropni mešanici Al-Si

Contibutors: Lojen, Gorazd (author) / Anžel, Ivan (author) / Križman, Alojz (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (54 kB)

A cost effective foundry method for the preparation of structural grade discontinuously reinforce...

Contibutors: Kevorkijan, Varužan (author) / Hexemer, R. (author)

Koprecipitacijska metoda za pripravo keramičnih materialov

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (70 kB)

1. TXT document (30 kB)

Contibutors: Maček, Jadran (author) / Marinšek, Marjan (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (102 kB)

Dušikovi analogi poliizotianaftena

Contibutors: Huskić, Miroslav (author) / Vanderzande, Dirk (author) / Gelan, Jan (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (127 kB)

The influence of polyester resin composition on fiber-matrix interphase properties

Contibutors: Rot, Katarina (author) / Ljubič-Mlakar, Tanja (author) / Šebenik, Anton (author) / Malavašič, Tatjana (author) / Makarovič, Matjaž (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (131 kB)

Surface oxide analysis of water atomised Al and Al-Si powders (1995, volume 29, issue 5/6)

Contibutors: Hertl, Bojan (author) / Breskvar, Bojan (author) / Kosec, Ladislav (author) / Zalar, A. (author) / Praček, B. (author)

Pregled stanja pri recikliranju polimernih materialov

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (382 kB)

1. TXT document (7 kB)

Contibutors: Kržan, Andrej (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (42 kB)

Vpliv polimernih materialov na atmosfero v miniaturnih hermetičnih relejih

Contibutors: Koller, Lidija (author) / Mozetič, Miran (author) / Požun, Karol (author) / Bizjak, Martin (author) / Vrhovec, Stane (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (40 kB)

Kompoziti, izdelani s sintezo dvofaznih (S+L) mešanic

Contibutors: Anžel, Ivan (author) / Lojen, Gorazd (author) / Križman, Alojz (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (128 kB)

Processing Sm-Fe(Ta)-N hard magnetic materials

Contibutors: Žužek Rožman, Kristina (author) / McGuiness, Paul J. (author) / Kobe, Spomenka (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (127 kB)

Morfologija mešanic PP/PS, kompatibiliziranih z blokkopolimerom SBS

Contibutors: Radonjič, Gregor (author) / Musil, Vojko (author) / Šmit, I. (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (59 kB)