dLib.si - tehnologija

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (596 kB)

A simplified method to analyze pile-supported and geosynthetic-reinforced embankments and the inf...

Contibutors: Feicheng, Liu (author)

1. PDF document (1339 kB)

Numbering: 2018, volume 15, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. TXT document (81 kB)

Synthesis of cobalt-alloyed ZnS quantum dots and investigation of their characteristics

Contibutors: Horoz, Sabit (author)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (444 kB)

Consolidation analysis of clayey soils using analytical tools

Contibutors: Olek, Bartłomiej Szczepan (author)

1. PDF document (1088 kB)

Numbering: 2018, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Predicting the uplift capacity of vertically located two-plate anchors

Contibutors: Misir, Gizem (author)

Attitude detection for the permanent-magnet spherical motor using two optical sensors

Numbering: 2018, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (507 kB)

1. TXT document (39 kB)

Contibutors: Guo, Xiwen (author)

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (874 kB)

Prediction of surface roughness in the ball-end milling process using response surface methodolog...

Contibutors: Sekulić, Milenko (author) / Pejić, Vlastimir (author) / Brezočnik, Miran (author) / Gostimirović, Marin (author) / Hadžistević, Miodrag (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (818 kB)

1. TXT document (44 kB)

Sensitivity of Weck's reagent to the microstructure inhomogeneities of a pulse-laser-modified AlS...

Contibutors: Steiner Petrovič, Darja (author) / Šturm, Roman (author)

1. PDF document (1678 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Investigation of the freeze-thaw resistance of eco-porous concrete containing fly ash

Contibutors: Zhang, Gui (author) / Yin, Jian (author) / Sheng, Li (author) / Sang, Zhenghui (author) / Xiong, Yao (author) / Gao, Ting (author) / Hu, Xiongwei (author)

1. PDF document (1156 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Research in virtual engineering

Contibutors: Hren, Gorazd (author) / Pezdevšek, Marko (author)

Journal of energy technology (2018, volume 11, issue 2)

Numbering: 2018, volume 11, iss. 1

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (873 kB)

1. TXT document (14 kB)

1. 243311360_2018_11_02 (11 MB)

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (129 kB)

On realization of a new high-precision and low-power CMOS analog multiplier circuit

Contibutors: Aghaei, Tohid (author) / Saatlo, Ali Naderi (author)

1. PDF document (1425 kB)

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

Impact of the optical fiber nonlinear phenomenon on the 16-channel DWDM OC-768 long-haul link

Contibutors: Huszaník, Tomáš (author) / Turán, Ján (author) / Ovsenik, L'uboš (author)

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (928 kB)

Charging a car in motion wirelessly

Contibutors: Ležaić, Dario (author) / Mihalić, Tihomir (author) / Predin, Andrej (author)

1. PDF document (1116 kB)

Numbering: 2018, volume 11, iss. 2

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Effect of particle impingement on electrochemical properties of stainless steel in a jet flow

Contibutors: Cheng, Jiarui (author) / Zhang, Ningsheng (author) / Dou, Yihua (author) / Li, Zhen (author) / Cao, Yinping (author)

1. PDF document (2820 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Trends in fatigue-crack growth for the 2024 Al-alloy after a single tensile overload

Contibutors: Zhang, Chunguo (author) / Lei, Beibei (author) / Liu, Rongwei (author) / Huo, Fengfeng (author)

1. PDF document (3222 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Root weld metal impact toughness of an energy component

Contibutors: Salamunić, Julijan Jan (author)

1. PDF document (1175 kB)

Numbering: 2018, volume 11, iss. 1

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

Pickling of Ti-Al-Si alloy powders - a method for improving compaction with spark-plasma sintering

Contibutors: Knaislová, Anna (author) / Novák, Pavel (author) / Průša, Filip (author) / Stoulil, Jan (author)

1. PDF document (1104 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Structure and properties of laser-beam-welded joints of low-alloy high-strength steel DOCOL 1200M...

Contibutors: Górka, Jacek (author) / Ozgowicz, Andrzej (author)

1. PDF document (3676 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Loading and unloading test of hard rock and its elastoplastic damage coupling model

Contibutors: Li, Zhen (author) / Zhang, Dongdong (author) / Zhao, Shuang (author)

1. PDF document (1156 kB)

Numbering: 2018, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

A new reduced size multiband fractal microstrip patch antenna for microwave applications

Contibutors: Qas Elias, Bashar Bahaa (author)

A modified mean-linear-intercept method for distinguishing lamellar and globular eutectic carbide...

Numbering: 2018, volume 85, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (717 kB)

1. TXT document (16 kB)

Contibutors: Zelič, Klemen (author) / Godec, Matjaž (author)

1. PDF document (2684 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Economic and ecological assessment of packaging waste in Slovenia

Contibutors: Krzyk, Mario (author) / Drev, Darko (author)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (602 kB)

Effects of MnO additions on the properties of alumina-magnesia refractory castables

Contibutors: Tang, Hai (author) / Yuan, Wenjie (author) / Shang, Heng (author)

1. PDF document (1249 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimizing the formulation of e-glass fiber and cotton shell particles hybrid composites for thei...

Contibutors: Annamalai, Manikandan (author) / Ramasubbu, Rajkumar (author)

1. PDF document (1117 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

A second-order continuous sliding mode based on DPC for wind-turbine-driven DFIG

Contibutors: Bouyekni, Abdelkader (author)

Multi-parameter surface-quality analysis

Numbering: 2018, volume 85, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (479 kB)

1. TXT document (25 kB)

Contibutors: Kubišová, Milena (author) / Pata, Vladimír (author) / Sýkorová, Libuše (author) / Hýlová, Lenka (author) / Šuba, Oldřich (author)

1. PDF document (2213 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (13 kB)

The effects of the geometric parameters of a circular shallow foundation on its uplift bearing ca...

Contibutors: Cui, Qiang (author)

Numbering: 2018, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (933 kB)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Contibutors: Akkuş, Harun (author)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

The influence of free-radical concentration on the shear bond strength of dental composites

Contibutors: Kiteska, Biljana (author) / Funduk, Nenad (author) / Cevc, Pavel (author) / Jesih, Adolf (author) / Anžlovar, Alojz (author) / Kopač, Igor (author)

Nitrides and carbides in 2101 lean duplex stainless steel

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (524 kB)

1. TXT document (33 kB)

Contibutors: Tehovnik, Franc (author) / Šetina, Barbara (author) / Vode, Franci (author) / Malej, Simon (author) / Burja, Jaka (author)

1. PDF document (2986 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A comparative study between a simplified fuzzy PI and classic PI input-output linearizing control...

Contibutors: Zohra Belaimeche, Fatima (author)

Numbering: 2018, volume 85, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (679 kB)

Synthesis and forming behaviour of AA7075-TiC powder-metallurgy composites

Contibutors: Chinnaiyan, Saravanan (author) / Karuppazhagi, Subramanian (author) / Veeramani, Anandakrishnan (author) / Shanmugam, Sathish (author)

Modelling of a transient-temperature field in plastics during laser cutting

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (593 kB)

1. TXT document (21 kB)

Contibutors: Šuba, Oldřich (author) / Sýkorová, Libuše (author) / Pata, Vladimír (author) / Kubišová, Milena (author)

1. PDF document (1286 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Informacije MIDEM (2018, volume 48, issue 2)

Source: Informacije MIDEM

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. 1220612_2018_48_02 (17 MB)

1. TXT document (187 kB)

Microstructure and mechanical properties of graphene-reinforced aluminum-matrix composites

Contibutors: Du, Xiaoming (author) / Zheng, Kaifeng (author) / Liu, Fengguo (author)

1. PDF document (1283 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Determination of the phase-orientation relationship and a quantitative microstructure analysis fo...

Contibutors: Godec, Matjaž (author) / Šuštaršič, Borivoj (author) / Toffolon-Masclet, Caroline (author) / Marini, Bernard (author)

1. PDF document (8287 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A pilot study of methods for measuring the residual properties of concrete exposed to elevated te...

Contibutors: Rozsypalová, Iva (author) / Daněk, Petr (author) / Šimonová, Hana (author) / Keršner, Zbyněk (author) / Kocáb, Dalibor (author)

The design of drilled displacement system piles using the cavity expansion theory

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (900 kB)

1. TXT document (51 kB)

Contibutors: Stacho, Jakub (author)

Shear modulus of clay-sand mixtures using bender element test

Numbering: 2018, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (963 kB)

1. TXT document (38 kB)

Contibutors: Cabalar, Ali Firat (author) / Khalaf, M. M. (author) / Karabash, Z. (author)

1. PDF document (1007 kB)

Numbering: 2018, volume 15, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Local mechanical properties of irradiated cross-linked HDPE

Contibutors: Hýlová, Lenka (author) / Maňas, David (author) / Manas, Miroslav (author) / Gajzlerova, Lenka (author) / Mizera, Ales (author)

Effect of beta irradiation on the structural changes of isotactic polypropylene

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (325 kB)

1. TXT document (13 kB)

Contibutors: Kaszonyiová (author) / Rybnikar, Frantisek (author) / Kubišová, Milena (author) / Maňas, David (author)

Genetic programming method for modelling of cup height in deep drawing process

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (710 kB)

1. TXT document (15 kB)

Contibutors: Gusel, Leo (author) / Boskovic, V. (author) / Domitner, J. (author) / Ficko, Mirko (author) / Brezočnik, Miran (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (585 kB)

High order sliding mode direct torque control of a DFIG supplied by a five-level SVPWM inverter f...

Contibutors: Bourouina, Ahmed (author)

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (731 kB)

Energy efficiency analysis in mobile hydraulics

Contibutors: Strmčnik, Ervin (author) / Konovšek, Damjan (author)

Numbering: 2018, volume 11, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (826 kB)

Impact of daily variations of atmospheric conditions on the AC corona onset electric field

Contibutors: Čaršimamović, Adnan (author)

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (542 kB)

A new control strategy for active-and reactive-power dispatching in a wind farm based on DFIG at ...

Contibutors: Boutoubat, Mohamed (author)

Leakage-cause analysis of a flange joint designed according to standards

Numbering: 2018, volume 85, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (659 kB)

1. TXT document (20 kB)

Contibutors: Lošák, Pavel (author) / Létal, Tomáš (author) / Buzík, Jiří (author) / Nad', Martin (author)

1. PDF document (2230 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Simple ECG and MCG devices for biomedical engineering students

Contibutors: Geršak, Gregor (author) / Beguš, Samo (author)

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. 12183892 (380 kB)

Optimization of the machining parameters in the electrochemical micro-machining of nickel

Contibutors: Krishnan, Rajendiran (author) / Duraisamy, Saravanan (author) / Palanisamy, Parthiban (author) / Veeramani, Anandakrishnan (author)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (503 kB)

A screen-printed piezoelectric energy harvester using ZnO tetrapod arrays

Contibutors: Dai, Quili (author) / Pan, Peng (author) / Zhang, Ruifeng (author) / Liu, Jun (author) / Yang, Zhengcun (author) / Wei, Jun (author) / Yuan, Qiping (author)

1. PDF document (1948 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Electrodeposition of a hydroxyapatite coating on a biocompatible NiTi alloy

Contibutors: Kocijan, Aleksandra (author)

Impedance measurement and computation for the steam- generator tube integrity using the ECNDT tec...

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (603 kB)

1. TXT document (17 kB)

Contibutors: Chebout, Mohammed (author)

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (837 kB)

Experimental investigations of pipeline filling and emptying in a small-scale apparatus

Contibutors: Karadžić, Uroš (author) / Bergant, Anton (author)

1. PDF document (2551 kB)

Numbering: 2018, volume 11, iss. 2

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

Influence of controlled forging and cooling on the microstructure of non-quenched and tempered 15...

Contibutors: Yong, Yang (author) / Zhou, Le-yu (author) / Jiang, Peng (author) / Xue-ping, Ren (author) / Pei-xin, Liang (author)

1. PDF document (2990 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Simulation-aided investigation of the effect of a pre-forming process on the initiation of cracks...

Contibutors: Kilerci, Ilter (author) / Culha, Osman (author)

1. PDF document (4324 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Compatibility of ionic liquids with hydraulic system components

Contibutors: Kambič, Milan (author) / Kalb, Roland (author) / Tič, Vito (author) / Lovrec, Darko (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (3510 kB)

1. TXT document (39 kB)

Evaluation of the constriction size reduction of granular filters due to upstream cohesive base-s...

Contibutors: Azirou, Samira (author) / Benamar, Ahmed (author) / Tahakourt, Abdelkader (author)

Electrodeposition of CdS thin films under a magnetic field

Numbering: 2018, volume 15, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (744 kB)

1. TXT document (49 kB)

Contibutors: Kiyak Yildirim, Ayça (author)

1. PDF document (1365 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Health safety of water for human consumption in the city of Čabar in the period of 2012-2016

Contibutors: Kelava, Ina (author) / Šutić, Ivana (author) / Pavišić, Valentino (author) / Salać, Nataša (author) / Bulog, Aleksandar (author)

Source: Sanitarno inženirstvo

Numbering: 2018, volume 12, issue 1

Provider: Inštitut za sanitarno inženirstvo
(Obvezni izvod spletne publikacije)

1. PDF document (385 kB)

Effects of impurities from phosphogypsum on the crystal growth of calcium sulfate hemihydrates

Contibutors: Tan, Hongbin (author) / Dong, Faqin (author) / Liu, Jinfeng (author) / Wang, Jin (author) / He, Xiaochun (author)

1. PDF document (1348 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Implementation of a method of numerical integration of average voltages atthe integration stepfor...

Contibutors: Kuznyetsov, Oleksiy (author) / Kuznietsov, Oleksandr (author) / Semeniuk, Mykola (author)

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (241 kB)

Theoretical analysis of three parameters determining a thermal power calibration method for the T...

Contibutors: Žagar, Tomaž (author)

Numbering: 2018, volume 11, iss. 3

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (670 kB)

Development and characterization of metal-dopant-based zirconia nanofibres via an electrospinning...

Contibutors: Jeeva Thomas, Mary (author) / Judes, John (author)

1. PDF document (2671 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Enhancement the dynamic stability of the iraq's power station using PID controller optimized by F...

Contibutors: Salman, Ghassan Abdullah (author) / Hussein, Husham Idan (author) / Hasan, Mohammed Saadi (author)

Numbering: 2018, volume 85, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (618 kB)

Journal of energy technology (2018, volume 11, issue 1)

1. 243311360_2018_11_01 (10 MB)

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (120 kB)

Microstructure and mechanical properties of high-purity aluminum deformed with equal-channel angu...

Contibutors: Li, Lihua (author) / Wang, Jin (author) / Gao, Songsong (author)

1. PDF document (3179 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Deformation behavior of the Mg-7Zn-3Cu-1Ce alloy during hot compression

Contibutors: Hu, Yaobo (author) / Meng, Wanqiu (author) / Zheng, Tianxu (author) / Zhang, Chao (author) / Yang, Qin (author) / Zhu, Zhentao (author)

1. PDF document (2360 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Significance of didactic tools in power electronics teaching

Contibutors: Srpak, Dunja (author) / Šumiga, Ivan (author) / Srpak, Josip (author)

Numbering: 2018, volume 85, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (973 kB)

Effect of the processing parameters on the microstructure and properties of the ZL116 aluminium a...

Contibutors: Pan, Tingting (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Yu, Kuanping (author) / Sun, Anna (author)

1. PDF document (1446 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Investigation of a tool and workpiece machined using a nickel-nanocoated insert

Contibutors: Manoj, Sureshkumar (author) / Gandhi, Veeramalai Chinnasamy Sathish (author)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (657 kB)

1. TXT document (20 kB)

Monitoring of the Belca rockfall

Contibutors: Lazar, Aleš (author) / Beguš, Tomaž (author) / Vulić, Milivoj (author)

1. PDF document (1127 kB)

Numbering: 2018, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

Comparison of R/C buildings with a soft- storey irregularity with respect to various national bui...

Contibutors: Donduren, Mahmet Sami (author) / Nakipoglu, Abdulhamit (author)

1. PDF document (1326 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

High-efficiency perovskite solar cells improved with low-cost orthorhombic Cu2ZnSnS4 as the hole-...

Contibutors: Zuo, Yinze (author) / Chen, Liang (author) / Jiang, Wenlong (author) / Liu, Biao (author) / Zeng, Chao (author) / Li, Meng (author) / Shi, Xingling (author)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (734 kB)

Benzimidazole and its derivatives as corrosion inhibitors for mild steel and hydrochloric acid

Contibutors: Li, Zhaolei (author) / Wang, Deng (author) / He, Bojun (author) / Ye, Xinxin (author) / Guo, Weijie (author)

1. PDF document (1245 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Comparison of microstructures and oxidation behaviors of ytria and magnesia stabilized zirconia t...

Contibutors: Doleker, Kadir Mert (author) / Ozgurluk, Yasin (author) / Ozkan, Dervis (author) / Mesekiran, Nihal (author) / Karaoglanli, Abdullah Cahit (author)

1. PDF document (3300 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Experimental study and analysis of the wear properties of friction-stir-welded AA7075-T6 and A384...

Contibutors: Anganan, Karuppannan (author) / Prabagaran, Subramaniam (author) / Muthukrishnan, Mayakrishnan (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Sensorless fuzzy sliding-mode control of the double-star induction motor using a sliding-mode obs...

Contibutors: Haithem Lazreg, Mohamed (author) / Bentaallah, Abderrahim (author)

1. PDF document (1172 kB)

Numbering: 2018, volume 85, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

Effect of particle roundness and morphology on the shear failure mechanism of granular soil under...

Contibutors: Karimi Ghalehjough, Babak (author) / Akbulut, Suat (author) / Çelik, Semet (author)

Dynamic analysis of FGM rhombic plates with a variation in the mass

Numbering: 2018, volume 15, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (754 kB)

1. TXT document (32 kB)

Contibutors: Ansari, Md Irfan (author) / Kumar, Ajay (author) / Barnat-Hunek, Danuta (author) / Brzyski, Przemyslaw (author) / Andrzejuk, Wojciech (author)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (634 kB)

Investigation of the 3D displacement characteristics for a macro-fiber composite transducer (MFC-P1)

Contibutors: Tiwari, Kumar Anubhav (author) / Raisutis, Renaldas (author)

1. PDF document (1251 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Journal of energy technology (2018, volume 11, issue 3)

1. 243311360_2018_11_03 (12 MB)

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (117 kB)

Influence of chunky graphite on latent heat

Contibutors: Mihalic Pokopec, Ivana (author) / Mrvar, Primož (author) / Bauer, Branko (author)

1. PDF document (2989 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Sanitarno inženirstvo (2018, volume 12, issue 1)

Source: Sanitarno inženirstvo

Provider: Inštitut za sanitarno inženirstvo

1. 216969216_2018_12_01 (4452 kB)

1. TXT document (156 kB)

Design of an anti-aliasing active filter for a hydroacoustic receiving station using discrete non...

Contibutors: Bugrov, Vladimir (author) / Makarova, Iuliia (author)

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

Effects of tire chips on the shrinkage and cracking characteristics of clayey soils

Contibutors: Terzi, Niyazi Ugur (author) / Özsoy, Mürüvet Ünlü (author) / Yilmaztürk, Ferruh (author) / Güllü, Bahattin (author) / Erenson, Can (author)

1. PDF document (1455 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

FPGA implementation of a space vector pulse width modulation technique for a two-level inverter

Contibutors: Belkheiri, Ahmed (author) / Aoughellanet, Said (author) / Belkheiri, Mohammed (author)

1. PDF document (1077 kB)

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

A general analytical solution to the one-dimensional consolidation problem for unsaturated soil u...

Contibutors: Li, Jiwei (author) / Wei, Changfu (author) / Zhao, Yanlin (author)

Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed Co...

Numbering: 2018, volume 15, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (646 kB)

1. TXT document (43 kB)

Contibutors: Krajňáková, Petra (author) / Gouvea, Larissa (author) / Čupera, Jan (author) / Jan, Vít (author) / Dlouhý, Ivo (author) / Spotz, Zdeněk (author)

1. PDF document (2438 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of a polyelectrolyte degradation with viscometry

Contibutors: Akyüz, Ali (author)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (573 kB)

Numerical optimization of brake discs for railway vehicles

Contibutors: Grivc, Uroš (author) / Muhič, Simon (author)

1. PDF document (4470 kB)

Numbering: 2018, volume 11, iss. 3

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Improving the corrosion resistance of the AZ61 magnesium alloy with a homogenization treatment be...

Contibutors: Yan, Zhi (author) / Xing, Hong (author) / Hu, Hongjun (author) / Zhang, Dingfei (author) / Zhongwen, Ou (author) / Yinning, Gou (author) / Linjiang, Chai (author)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (931 kB)

Influence of steam-side oxide scales on the creep life of a boiler superheater tube

Contibutors: Nad', Martin (author) / Létal, Tomáš (author) / Buzík, Jiří (author) / Lošák, Pavel (author)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (582 kB)

Use of a laser disc for cutting silicon wafers

Contibutors: Musztyfaga, Małgorzata (author) / Janicki, Damian (author) / Panek, Piotr (author) / Kurilla, Peter (author)

1. PDF document (1558 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (15 kB)

Study on the in-plane shear performance of spacer fabrics in composite forming

Contibutors: Arumugam, Veerakumar (author) / Mishra, Rajesh (author) / Tunak, Maros (author) / Tomkova, Blanka (author) / Militký, Jiří (author)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (849 kB)

Mechanical testing of heterogeneous energy components

Contibutors: Pavlin, Tadej (author)

1. PDF document (3736 kB)

Numbering: 2018, volume 11, iss. 1

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

A conducted EMI noise prediction in DC/DC converter using a frequency-domain approach

Contibutors: Benhadda, Nassireddine (author) / Bendaoud, Abdelber (author) / Chikhi, Nawel (author)

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (535 kB)

High-impedance fault identification and classification using a discrete wavelet transform and art...

Contibutors: Hubana, Tarik (author) / Šarić, Mirza (author) / Avdakovic, Samir (author)

Numbering: 2018, volume 85, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Monitoring and simulation of the unsteady states in continuous casting

Contibutors: Pyszko, René (author) / Franěk, Zdeněk (author) / Příhoda, Miroslav (author) / Velicka, Marek (author) / Sikora, Kamil (author)

1. PDF document (1814 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)