dLib.si - search results

Effect of severe plastic and heavy cold deformation on the structural and mechanical properties o...

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

1. TXT document (25 kB)

Contibutors: Palán, Jan (author) / Šutta, P. (author) / Kubina, Tomáš (author) / Dománková, Mária (author)

1. PDF document (1140 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Comparison of the surface and anticorrosion properties of SiOsub2 and TiOsub2 nanoparticle epoxy ...

Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)

Oxidation of molybdenum by low-energy oxygen-ion bombardment

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (541 kB)

1. TXT document (30 kB)

Contibutors: Jelovica Badovinac, Ivana (author) / Kavre, Ivna (author) / Šarić, Iva (author) / Peter, Robert (author) / Petravić, Mladen (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (697 kB)

Increasing the wear resistance of Al-Mg components using thermal-spray coatings

Contibutors: Lukauskaitë, Raimonda (author) / Černašejus, Olegas (author) / Škamat, Jelena (author) / Asadauskas, Svajus (author) / Ručinskienë, Alma (author) / Kalpokaitë-Dičkuvienë, Regina (author) / Višniakov, Nikolaj (author)

Laser welding of the new grade of advanced high-strength steel Domex 960

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

1. TXT document (30 kB)

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Lisiecki, Aleksander (author)

1. PDF document (4387 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate

Contibutors: Maretić, Mauro (author) / Smoljan, Božidar (author) / Iljkić, Dario (author)

The effect of current types on the microstructure and corrosion properties of Ni/nanoAlsub2Osub3 ...

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (948 kB)

1. TXT document (24 kB)

Contibutors: Kucharska, Beata (author) / Krawczynska, Agnieszka (author) / Rożniatowski, Krzysztof (author) / Zdunek, Joanna (author) / Poplawski, Karol (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (5584 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of holding time on the production of Nb-NbAl3 intermetallic composites via electric-curren...

Contibutors: Aybey, Muhammed (author) / Yener, Tuba (author) / Ipek, Mediha (author) / Zeytin, Sakin (author)

1. PDF document (1282 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (15 kB)

Gelling polysaccharide as the electrolyte matrix in a dye-sensitized solar cell

Contibutors: Bantang, Jose Paolo (author) / Camacho, Drexel (author)

Formation of Ni-Ti intermetallics during reactive sintering at 800-900 °C

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (890 kB)

1. TXT document (71 kB)

Contibutors: Novák, Pavel (author) / Vladimír, Vojtěch (author) / Průša, Filip (author) / Pokorný, Petr (author) / Salvetr, Pavel (author) / Knaislová, Anna (author) / Nová, Kateřina (author)

1. PDF document (1498 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Analysis of the fiber distribution, size, and volume ratio of unidirectional composite plates wit...

Contibutors: Zemčík, Robert (author) / Srbová, Hana (author) / Ekštein, Kamil (author) / Pirner, Ivan (author) / Medlín, Rostislav (author)

1. PDF document (5357 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Optimum bushing length in thermal drilling of galvanized steel using artificial neural network co...

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

1. TXT document (25 kB)

Contibutors: Hynes, Navasingh Rajesh Jesudoss (author) / Kumar, Ramar (author) / Sujana, Jebaraj Angela Jennifa (author)

1. PDF document (2122 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (86 kB)

Preparation of bio-polymeric materials, their microstructures and physical functionalities

Contibutors: Chen, Xiu-Li (author) / Zhao, Ai-Juan (author) / Sun, Hai-Jie (author) / Pei, Xian-Ru (author)

Influence of a cryogenic treatment on the fracture toughness of an AISI 420 martensitic stainless...

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (683 kB)

1. TXT document (41 kB)

Contibutors: Prieto, G. (author) / Tuckart, Walter (author) / Ipina, J. E. Pérez (author)

Distribution of Alsub2Osub3 reinforcement particles in austenitic stainless steel depending on th...

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

1. TXT document (31 kB)

Contibutors: Kračun, Ana (author) / Podgornik, Bojan (author) / Tehovnik, Franc (author) / Kafexhiu, Fevzi (author) / Jenko, Darja (author)

1. PDF document (3935 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

Poly(vinyl alcohol): formulation of a polymer ink for the patterning of substrates with a drop-on...

Contibutors: Šuly, Pavol (author) / Krčmář, Petr (author) / Mašlík, Jan (author) / Urbánek, Pavel (author) / Kuřitka, Ivo (author)

1. PDF document (1638 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Corrosion on polished and laser-textured surfaces of an Fe-Mn biodegradable alloy

Contibutors: Hočevar, Matej (author) / Donik, Črtomir (author) / Paulin, Irena (author) / Kocijan, Aleksandra (author) / Tehovnik, Franc (author) / Burja, Jaka (author) / Gregorčič, Peter (author) / Godec, Matjaž (author)

1. PDF document (2931 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

Rheological properties of feedstocks and the structure of injection moulders for sintering compos...

Contibutors: Golombek, K. (author) / Matula, G. (author) / Stamenković, Dragomir (author) / Mikula, Jarosław (author) / Soković, Mirko (author)

1. PDF document (2745 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Formation of a corrosion-resistant alumina coating on a 6061 aluminum alloy using a combination o...

Contibutors: Paksoy, Ahmet Hilmi (author) / Muhaffel, Faiz (author) / Koca, Merve (author) / Gokce, Ozge (author) / Cimenoglu, Huseyin (author)

1. PDF document (1979 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Rock burst dependency on the type of steel arch support in the Velenje mine

Contibutors: Vižintin, Goran (author) / Mayer, Janez (author) / Lajlar, Bojan (author) / Vukelič, Željko (author)

1. PDF document (3191 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Microstructural evaluation of Ni-SDC cermet from a representative 2D image and /or a 3D reconstru...

Contibutors: Kapun, Gregor (author) / Marinšek, Marjan (author) / Merzel, Franci (author) / Šturm, Sašo (author) / Gaberšček, Miran (author) / Skalar, Tina (author)

1. PDF document (1957 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (76 kB)

Deformation and improvement of the IR transmission of single-crystal silicon by direct current he...

Contibutors: Miura, Kiyotaka (author) / Shimotsuma, Yasuhiko (author) / Sakakura, Masaaki (author) / Gunji, Shunsuke (author) / Sakamoto, Taiki (author) / Morishita, Kohei (author) / Hachinohe, Satoru (author)

1. PDF document (2413 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Experimental determination of the influence of fresh concrete's composition on its resistance to ...

Contibutors: Kocáb, Dalibor (author) / Komárková, Tereza (author) / Králíková, Monika (author) / Misák, Petr (author) / Moravcová, Bronislava (author)

1. PDF document (1542 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Porous HA/alumina composites intended for bone-tissue engineering

Contibutors: Bartonickova, Eva (author) / Vojtisek, Jan (author) / Tkacz, Jakub (author) / Porizka, Jaromir (author) / Lukaszkowicz, Krzysztof (author) / Masilko, Jiri (author) / Mončeková, Miroslava (author) / Pařízek, Ladislav (author)

1. PDF document (1612 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of scanning speed on the intermetallic produced in-situ in laser-metal-deposited TiC/Ti...

Contibutors: Mahamood, Rasheedat Modupe (author) / Akinlabi, Esther T. (author)

1. PDF document (1703 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Lacunarity properties of nanophotonic materials based on poly(methyl methacrylate) for contact le...

Contibutors: Tomić, Marija (author) / Bojović, Božica (author) / Stamenković, Dragomir (author) / Mileusnić, Ivana (author) / Koruga, Djuro (author)

1. PDF document (1052 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of tool geometry and welding parameters on the microstructure and static strength of the f...

Contibutors: Abedini, Omid (author) / Ranjbarnodeh, Eslam (author) / Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (3418 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Increasing the tensile strength and elongation of 16MnCrS5 steel using genetic programming

Contibutors: Kovačič, Miha (author) / Turnšek, Ana (author) / Ocvirk, Darja (author) / Gantar, Gašper (author)

Investigation of the static icing property for super-hydrophobic coatings on aluminium

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (831 kB)

1. TXT document (53 kB)

Contibutors: Jin, Hai Yun (author) / Nie, Shi Chao (author) / Li, Yu Feng (author) / Xu Feng, Tian (author) / Zhang, Peng (author) / Li, Wen (author)

Selective leaching and surface properties of TiNiFe shape-memory alloys

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (887 kB)

1. TXT document (40 kB)

Contibutors: Chang, Shih-Hang (author) / Liou, Jyun-Sian (author)

1. PDF document (1234 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A review of the surface modifications of titanium alloys for biomedical applications

Contibutors: Manjaiah, Mallaiah (author) / Laubscher, R. F. (author)

1. PDF document (1360 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (71 kB)

Properties and structures of bulk metallic glasses based on magnesium

Contibutors: Kiljan, Anna (author) / Nowosielski, Ryszard (author) / Babilas, Rafał (author)

1. PDF document (2292 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (18 kB)

The use of natural sepiolite fiber in concrete

Contibutors: Koltka, Selçuk (author) / Uygunoglu, Tayfun (author) / Sabah, Eyüp (author) / Can, Muhammed Fatih (author)

1. PDF document (2029 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

Analysis of precipitates in aluminium alloys with the use of high-resolution electron microscopy ...

Contibutors: Matus, Krzysztof (author) / Tomiczek, Anna (author) / Gołombek, Klaudiusz (author) / Pawlyta, Mirosława (author)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (941 kB)

2D numeric simulation of serrated-chip formation in orthogonal cutting of AISI316H stainless steel

Contibutors: Gok, Arif (author)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (760 kB)

Effect of cutting parameters on the drilling of AlSi7 metallic foams

Contibutors: Uzun, Gultekin (author) / Gokmen, Ugur (author) / Cinici, Hanifi (author) / Turker, Mehmet (author)

Short-term creep of P91 heat-resistant steels at low stresses and an instantaneous-stress-change ...

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (924 kB)

1. TXT document (27 kB)

Contibutors: Zhe, Jiang (author) / Junjie, Shen (author) / Pengshuo, Zhao (author)

1. PDF document (1014 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Fracture toughness of ledeburitic VANADIS 6 steel after sub-zero treatment for 17 h and double te...

Contibutors: Ptačinová, Jana (author) / Jurči, Peter (author) / Dlouhý, Ivo (author)

1. PDF document (1474 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

The growth of beta phase in the gamma-brass-copper diffusion couple

Contibutors: Hoxha, Adhurim (author) / Heger, Dietrich (author)

Influence of stainless-steel wire mesh on the mechanical behaviour in a glass-fibre-reinforced ep...

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (835 kB)

1. TXT document (21 kB)

Contibutors: Sakthivel, Munisamy (author) / Vijayakumar, Subramani (author)

Durability of materials based on a polymer-silicate matrix and a lightweight aggregate exposed to...

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (847 kB)

1. TXT document (31 kB)

Contibutors: Melichar, Tomáš (author) / Bydžovský, Jiří (author) / Dufka, Ámos (author)

1. PDF document (2439 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (66 kB)

Synthesis of PMMA/ZnO nanoparticles composite used for resin teeth

Contibutors: Popović, Danica (author) / Bobovnik, Rajko (author) / Bolka, Silvester (author) / Vukadinovič, Miroslav (author) / Lazić, Vojkan (author) / Rudolf, Rebeka (author)

1. PDF document (1734 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (66 kB)

Basic physical, mechanical and electrical properties of electrically enhanced alkali-activated al...

Contibutors: Fiala, Lukáš (author) / Jerman, Miloš (author) / Rovnaník, Pavel (author) / Černý, Robert (author)

Effect of the mode and dynamics of thermal processes on DSC-acquired phase-change temperature and...

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (999 kB)

1. TXT document (41 kB)

Contibutors: Fořt, Jan (author) / Pavlík, Zbyšek (author) / Trník, Anton (author) / Pavlíkova, Milena (author) / Černý, Robert (author)

Comparison of homogenization approaches used for the identification of the material parameters of...

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (496 kB)

1. TXT document (63 kB)

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Lukeš, Vladimir (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (936 kB)

Effects of an Alsub2Osub3 nano-additive on the performance of ceramic coatings prepared with micr...

Contibutors: Demirbaş, Çagatay (author) / Ayday, Aysun (author)

1. PDF document (1914 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (14 kB)

Investigation of the geometrical accuracy and thickness distribution using 3d laser scanning of A...

Contibutors: Bayram, Halil (author) / Köksal, Nurullah Sinan (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (816 kB)

Corrosion resistance of as-plated and heat-treated electroless dublex Ni-P/Ni-B-W coatings

Contibutors: Yüksel, Behiye (author) / Erdogan, Garip (author) / Baştan, Fatih Erdem (author) / Yildiz, Ahmet (author)

1. PDF document (1369 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

The development of new types of secondary protection for concrete structures exposed to extreme c...

Contibutors: Dufka, Ámos (author) / Melichar, Tomáš (author) / Bydžovský, Jiří (author) / Vaněrek, Jan (author)

1. PDF document (2780 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Impact toughness of laser-welded butt joints of the new steel grade STRENX 1100MC

Contibutors: Kurc-Lisiecka, Agnieszka (author)

1. PDF document (8261 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Effect of yttrium and zirconium microalloying on the structure and properties of weld joints of a...

Contibutors: Illarionov, Anatoly (author) / Popov, Artemy (author) / Illarionova, Svetlana (author) / Gadeev, Dmitry (author)

1. PDF document (2331 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Surface characteristics of Invar alloy according to micro-pulse electrochemical machining

Contibutors: Kim, Seong-Hyun (author) / Choi, Seung-Geon (author) / Choi, Woong-Kirl (author) / Lee, Eun-Sang (author)

1. PDF document (2298 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Effect of inoculation on the formation of chunky graphite in ductile-iron castings

Contibutors: Mihalic Pokopec, Ivana (author) / Mrvar, Primož (author) / Bauer, Branko (author)

1. PDF document (2138 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Determining the heat-transfer coefficient in an isothermal model of a shaft furnace

Contibutors: Čarnogurská, Mária (author) / Dobáková, Romana (author) / Brestovič, Tomáš (author) / Příhoda, Miroslav (author)

1. PDF document (1575 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Powder-metallurgy preparation of NiTi shape-memory alloy using mechanical alloying and spark-plas...

Contibutors: Novák, Pavel (author) / Moravec, Hynek (author) / Vladimír, Vojtěch (author) / Knaislová, Anna (author) / Školáková, Andrea (author) / Kubatík, Tomáš (author) / Kopeček, Jaromír (author)

1. PDF document (1225 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Optimizing the reactivity of a raw-material mixture for Portland clinker firing

Contibutors: Fridrichová, Marcela (author) / Gazdič, Dominik (author) / Dvořák, Karel (author) / Magrla, Radek (author)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (347 kB)

Lightweight aggregates made from fly ash using the cold-bond process and their use in lightweight...

Contibutors: Frankovič, Ana (author) / Bokan-Bosiljkov, Violeta (author) / Ducman, Vilma (author)

1. PDF document (1692 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Performance of nano-filtration and reverse osmosis processes for wastewater treatment

Contibutors: Al-Jlil, Saad A. (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (607 kB)

Nano-indentation investigations of the mechanical properties of thin TiOsub2, WOsub3 and their co...

Contibutors: Cherneva, Sabina (author) / Iankov, Roumen (author) / Radic, Nenad (author) / Stoychev, Dimitar (author) / Datcheva, Maria (author)

Time-lapse micro-tomography analysis of the deformation response of a gellan-gum-based scaffold

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (844 kB)

1. TXT document (50 kB)

Contibutors: Kytýř, Daniel (author) / Fenclová, Nela (author) / Zlámal, Petr (author) / Kumpová, Ivana (author) / Fíla, Tomáš (author) / Koudelka, Petr (author) / Gantar, Ana (author) / Novak, Saša (author)

1. PDF document (1319 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Cavitation erosion properties of a nickel-free high-nitrogen Fe-Cr-Mn-N stainless steel

Contibutors: Qiao, Yanxin (author) / Cai, Xiang (author) / Chen, Yipeng (author) / Cui, Jie (author) / Tang, Yanbing (author) / Li, Huabing (author) / Jiang, Zhouhua (author)

1. PDF document (1366 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

The effect of thermo-mechanical processing on the structure, static mechanical properties and fat...

Contibutors: Kubásek, Jiří (author) / Vojtěch, Dalibor (author) / Dvorský, Drahomír (author)

1. PDF document (3551 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of particles size on the mechanical properties of SiC-reinforced aluminium 8011 composites

Contibutors: Ashok, Nagaraj (author) / Shanmughasundaram, Palanisamy (author)

1. PDF document (1120 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Miswak (Salvadora Persica roots): discovery of a new biomaterial for removing heavy metals from w...

Contibutors: Aljlil, Saad A. (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (187 kB)

Influence of alloying elements on the mechanical properties of a cobalt-based alloy produced with...

Contibutors: Nová, Kateřina (author) / Novák, Pavel (author) / Dvorský, Drahomír (author)

1. PDF document (1692 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Grain-refining ability of ultra-rapid annealing for low-carbon steel: severe plastic deformation

Contibutors: Mostafaei, Mohammad Ali (author) / Kazeminezhad, Mohsen (author)

1. PDF document (2265 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...

Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)

1. PDF document (1238 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Electrospinning of biodegradable polyester urethane

Contibutors: Pavelkova, Alena (author) / Kucharczyk, Pavel (author) / Sedlarik, Vladimír (author)

Molecular dynamics simulations of plastic deformation of metallic surfaces

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (402 kB)

1. TXT document (11 kB)

Contibutors: Pukšič, Nuša (author) / Jenko, Monika (author) / Godec, Matjaž (author)

1. PDF document (2127 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (18 kB)

Modeling of water removal in direct-chill casting of aluminum-alloy billets

Contibutors: Meysami, Amirhossein (author) / Mahmoudi, Sahin (author) / Hajisafari, Mahmoud (author)

1. PDF document (2115 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (55 kB)

Changes in the composite structure and parameters after an exposure to a synergic action of vario...

Contibutors: Melichar, Tomáš (author) / Dufka, Ámos (author) / Bydžovský, Jiří (author)

1. PDF document (2832 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

De-oxidation of PK942 steel with Ti and Zr

Contibutors: Koležnik, Mitja (author) / Burja, Jaka (author) / Šetina, Barbara (author) / Nagode, Aleš (author) / Medved, Jože (author)

1. PDF document (2130 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Investigation of grain boundaries in alloy 263 after special heat treatment

Contibutors: Slatkovský, Ivan (author) / Dománková, Mária (author) / Sahul, Martin (author)

1. PDF document (4910 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Using the Barkhausen-noise analysis and metal-magnetic-memory method for material characteristics...

Contibutors: Kolařík, Kamil (author) / Šimeček, Jiří (author) / Kříž, Antonín (author) / Čapek, Jiří (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (999 kB)

Experimental analysis of the influence of concrete curing on the development of its elastic modul...

Contibutors: Kocáb, Dalibor (author) / Králíková, Monika (author) / Cikrle, Petr (author) / Misák, Petr (author) / Kucharczyková, Barbara (author)

One-dimensional elasto-plastic material model with damage for a quick identification of the mater...

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (788 kB)

1. TXT document (42 kB)

Contibutors: Kroupa, Tomáš (author) / Srbová, Hana (author) / Klesa, Jan (author)

Phase-transformation behavior and micromechanical properties of a dual-phase steel after chemical...

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (857 kB)

1. TXT document (24 kB)

Contibutors: Zhao, Ai-Juan (author) / Zhao, Guoxin (author) / Sun, Hai-Jie (author) / Gao, Hairong (author) / Wang, Shaoqing (author) / Chen, Xiu-Li (author)

1. PDF document (2658 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (60 kB)

Central composite design on the volume of laser metal deposited Ti6Al4V and Cu

Contibutors: Erinosho, Mutiu F. (author) / Akinlabi, Esther T. (author) / Iljkić, Dario (author)

1. PDF document (2027 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Formation mechanism of diffusion-reaction layer for a Cu/Ti diffusion couple under different heat...

Contibutors: Liu, Keh-Fei (author) / Wu, Mingfang (author) / Pu, Juan (author)

Tensile behaviour and fractography analyses of LM6/ZrOsub2 composites

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (709 kB)

1. TXT document (47 kB)

Contibutors: Karthikeyan, Govindan (author) / Jinu, Gowtthanithankachi Raghuvaran (author)

1. PDF document (1766 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Effect of adding water-based binders on the technological properties of ceramic slurries based on...

Contibutors: Wiśniewski, Paweł (author) / Małek, Marcín (author) / Mizera, Jarosław (author) / Kurzydłowski, Krzysztof Jan (author)

Mechanical and tribological properties of nanofilled phenolic-matrix laminated composites

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (639 kB)

1. TXT document (14 kB)

Contibutors: Pelin, George (author) / Ban, Cristina-Elisabeta (author) / Stefan, Adriana (author) / Dinca, Ion (author) / Andronescu, Ecaterina (author) / Ficai, Anton (author) / Truşca, Roxana (author)

1. PDF document (1251 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Characterization of structural materials by spherical indentation

Contibutors: Čech, Jaroslav (author) / Haušild, Petr (author) / Marashi, Seyed Pirooz Hoveida (author)

Strain-rate-dependent tensile characteristics of AA2139-T351 aluminum alloy

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (716 kB)

1. TXT document (21 kB)

Contibutors: Çavuşoglu, Onur (author) / Leacock, Alan Gordon (author) / Gürün, Hakan (author) / Güral, Ahmet (author)

1. PDF document (1181 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Classification of surface defects on steel sheet using convolutional neural networks

Contibutors: Zhou, Shiyang (author) / Chen, Youping (author) / Zhang, Dailin (author) / Xie, Jingming (author) / Zhou, Yunfei (author)

Temperature-initiated structural changes in FeSsub2 pyrite from Pohorje, Eastern Alps, North-East...

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (786 kB)

1. TXT document (42 kB)

Contibutors: Leskovar, Blaž (author) / Vrabec, Mirijam (author) / Dolenec, Matej (author) / Naglič, Iztok (author) / Dolenec, Tadej (author) / Dervarič, Evgen (author) / Markoli, Boštjan (author)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (734 kB)

Properties of Alsub2Osub3/TiOsub2 and ZrOsub2/CaO flame-sprayed coatings

Contibutors: Czupryński, Artur (author)

1. PDF document (1652 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Study of the properties and structure of selected tool steels for cold work depending on the para...

Contibutors: Kuřík, Martin (author) / Lacza, Jakub (author) / Vlach, Tomáš (author) / Sobotová, Jana (author)

1. PDF document (1435 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Durability of FRP/wood bonds glued with epoxy resin

Contibutors: Vaněrek, Jan (author) / Šmak, Milan (author) / Kusák, Ivo (author) / Misák, Petr (author)

1. PDF document (2956 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Predictive model and optimization of processing parameters for plastic injection moulding

Contibutors: Kramar, Davorin (author) / Cica, Djordje (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

Examination methods for waterproofing injection screens in various building materials

Contibutors: Drochytka, Rostislav (author) / Černý, Vít (author) / Melichar, Jindřich (author)

Fabrication and optimum conditions of a superhydrophobic surface using a facile redox reaction an...

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (806 kB)

1. TXT document (16 kB)

Contibutors: Wei, Shichao (author) / Ma, Fumin (author) / Li, Wen (author) / Li, Hong (author) / Ruan, Min (author) / Yu, Zhanlong (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (806 kB)

Surface characterization of platinum stimulating electrodes using an electrochemical scanning method

Contibutors: Mehle, Andraž (author) / Rozman, Janez (author) / Šala, Martin (author) / Ribarič, Samo (author) / Pečlin, Polona (author)

1. PDF document (1148 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (78 kB)

Copolymerization of poly (o-phenylenediamine-co-o/p-toluidine) via the chemical oxidative technique

Contibutors: Melad, Omar (author) / Jarour, Mariam (author)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (563 kB)

The influence of an isothermal annealing process on the structure and magnetic properties of the ...

Contibutors: Pietrusiewicz, Paweł (author) / Nabiałek, Marcin (author) / Olszewski, Jacek (author) / Lesz, Sabina (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (839 kB)

Energy-efficient gas-turbine blade-material technology

Contibutors: Huda, Zainul (author)

1. PDF document (1430 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Additive manufacturing: the future of manufacturing

Contibutors: Adekanye, Sheriff Adefemi (author) / Mahamood, Rasheedat Modupe (author) / Akinlabi, Esther T. (author) / Owolabi, Moses Gbadebo (author)