dLib.si - Slovenia

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (824 kB)

An initial study of Aerosol Jet printed interconnections on extrusion-based 3D-printed substrates

Contibutors: Vogeler, Frederik (author) / Verheecke, Wesley (author) / Voet, André (author) / Valkenaers, Hans (author)

1. PDF document (1081 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Characterizing effective d sub 31 values for PZT from the nonlinear oscillations of clamped-clamp...

Contibutors: Dick, Andrew J. (author)

Final manufacturing process of front side metallisation on silicon solar cells using conventional...

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (680 kB)

1. TXT document (25 kB)

Contibutors: Dobrzański, Leszek Adam (author) / Musztyfaga, Małgorzata (author) / Drygała, Aleksandra (author)

1. PDF document (3001 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Characteristics of hard coatings on AZ61 magnesium alloys

Contibutors: Tański, Tomasz (author)

1. PDF document (7443 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Numerical and experimental study of frictional behavior in bending under tension test

Contibutors: Lemu, Hirpa G. (author) / Trzepieciński, Tomasz (author)

1. PDF document (1934 kB)

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Parametric optimization of the output shaft of a portal axle using finite element analysis

Contibutors: Ooi, Jong Boon (author) / Wang, Xin (author) / Lim, Ying Pio (author) / Tan, ChingSeong (author) / Ho, Jee-Hou (author) / Wong, Kok-Cheong (author)

1. PDF document (1568 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

A contribution for a pragmatics-based approach to concurrent engineering implementation

Contibutors: Popović, Nenad (author) / Putnik, Goran D. (author) / Jaško, Ondrej (author) / Filipović, Jovan (author)

Modeling nonlinear viscoelastic nanoindentation of PVAc at different unloading rates

Numbering: 2013, volume 59, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (991 kB)

1. TXT document (48 kB)

Contibutors: Kucuk, Yilmaz (author)

1. PDF document (1253 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Polypropylene/clay nanocomposites produced by shear controlled orientation in injection moulding

Contibutors: Costantino, Alejandra (author) / Pettarin, Valeria (author) / Viana, Julio (author) / Pontes, Antonio (author) / Pouzada, António Sérgio (author) / Frontini, Patricia (author)

1. PDF document (2365 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Traffic modelling and performance evaluation in the Kotor cruise port

Contibutors: Kofjač, Davorin (author) / Škurić, Maja (author) / Dragović, Branislav (author) / Škraba, Andrej (author)

1. PDF document (1634 kB)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Injection-moulding compounding of PP polymer nanocomposites

Contibutors: Battisti, Markus Gottfried (author) / Friesenbichler, Walter (author)

1. PDF document (2135 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Flow characteristic of staggered multiple slotted tubes in the passage of a fin tube heat exchanger

Contibutors: Yayla, Sedat (author)

1. PDF document (4632 kB)

Numbering: 2013, volume 59, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Experimental research and computer simulation of face grind-hardening technology

Contibutors: Li, Jianping (author) / Liu, Songyong (author) / Du, Changlong (author)

1. PDF document (3201 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Microstructural analysis of laser coated ceramic components TiB sub 2 and TiC on aluminium alloy ...

Contibutors: Ravnikar, Dunja (author) / Mrvar, Primož (author) / Medved, Jože (author) / Grum, Janez (author)

1. PDF document (5249 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Experimental identification of overall structural damping of system

Contibutors: Radoičić, Goran (author) / Jovanović, Miomir (author)

1. PDF document (2471 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A multi-axis biodynamic measuring handle for a human hand-arm system

Contibutors: Knez, Luka (author) / Slavič, Janko (author) / Boltežar, Miha (author)

1. PDF document (1452 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Model development and dynamic load-sharing analysis of longitudinal-connected air suspensions

Contibutors: Chen, Yikai (author) / He, Jie (author) / King, Mark (author) / Wuwei, Chen (author) / Wang, Changjun (author) / Zhang, Weihua (author)

1. PDF document (1343 kB)

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Nonlinear control of a hybrid batch reactor

Contibutors: Štampar, Simon (author) / Soklič, Saša (author) / Karer, Gorazd (author)

1. PDF document (1589 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Freight forward agreement timeseries modeling based on artificial neural network models

Contibutors: Lyridis, Dimitrios (author) / Zacharioudakis, Panayotis (author) / Iordanis, Stylianos (author) / Daleziou, Sophia (author)

1. PDF document (1469 kB)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimal design based on dynamic characteristics and experimental implementation of submersible el...

Contibutors: Cai, Baoping (author) / Liu, Yonghong (author) / Abulimiti, Aibaibu (author) / Ji, Renjie (author) / Zhang, Yanzhen (author) / Dong, Xin (author) / Zhou, Yuming (author)

1. PDF document (2531 kB)

Numbering: 2013, volume 59, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Selecting the most adaptable work equipment

Contibutors: Berlec, Tomaž (author) / Kušar, Janez (author) / Rihar, Lidija (author) / Starbek, Marko (author)

A theoretical and numerical study of an additional viscosity term in a modified elasto-plastic fr...

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (954 kB)

1. TXT document (28 kB)

Contibutors: Petrun, Tomaž (author) / Flašker, Jože (author) / Kegl, Marko (author)

1. PDF document (2543 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Measurement uncertainty assessment in remote object geolocation

Contibutors: Kuščer, Lovro (author) / Diaci, Janez (author)

1. PDF document (2293 kB)

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Measurement of involute profile with small clamping eccentricity in a gear measuring center

Contibutors: Lianfu, Han (author) / Wenyan, Tang (author) / Jun, Wang (author) / Changfeng, Fu (author)

1. PDF document (1778 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Evaluation of fluid flow over stepped spillways using the finite volume method as a novel approach

Contibutors: Vosoughifar, Hamid Reza (author) / Dolatshah, Azam (author) / Sadat Shokouhi, Seyed Kazem (author) / Hashemi Nezhad, Seyed Reza (author)

1. PDF document (2865 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Reducing the computational time of the SPH method with a coupled 2-D/3-D approach

Contibutors: Džebo, Elvira (author) / Žagar, Dušan (author) / Četina, Matjaž (author) / Petkovšek, Gregor (author)

1. PDF document (7763 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The effect of surface roughness of end-mills on optimal cutting performance for high-speed machining

Contibutors: Chi-Hsiang, Chen (author) / Yung-Cheng, Wang (author) / Bean-Yin, Lee (author)

1. PDF document (1198 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Sensitivity analysis for identifying the critical productivity factors of container terminals

Contibutors: Lu, Bo (author) / Kyu Park, Nam (author)

1. PDF document (1199 kB)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

An experimental and numerical investigation of a grid composite cylindrical shell subjected to tr...

Contibutors: Arashmehr, Jafar (author) / Rahimi, Gholam Hossein (author) / Rasouli, Seyed Fazel (author)

1. PDF document (3506 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

A functional reasoning cube model for conceptual design of mechatronic systems

Contibutors: Zou, Jiehui (author) / Du, Qungui (author)

1. PDF document (1593 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Enhancing micro-EDM using ultrasonic vibration and approaches for machining of nonconducting cera...

Contibutors: Schubert, Andreas (author) / Zeidler, Henning (author) / Hackert-Oschätzchen, Matthias (author) / Schneider, Jörg (author) / Hahn, Martin (author)

1. PDF document (2918 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

3D numerical analysis of 2D profile bending with the torque superposed spatial bending method

Contibutors: Hudovernik, Matej (author) / Staupendahl, Daniel (author) / Gharbi, Mohammad (author) / Hermes, Matthias (author) / Tekkaya, A. Erman (author) / Kuzman, Karl (author) / Slabe, Janez Marko (author)

1. PDF document (3575 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The influence of processing on the aesthetic, morphological and mechanical properties of structur...

Contibutors: Esteves, Fantina Rosa (author) / Carvalho, Tiago Alexandre (author) / Pouzada, António Sérgio (author) / Martins, Carla Isabel (author)

1. PDF document (4208 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A new method for machinery fault diagnoses based on an optimal multiscale morphological filter

Contibutors: Tan, Wei (author) / Chen, Xiaoan (author) / Dong, Shaojiang (author)

1. PDF document (2025 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

An experimental study of the tribological characteristics of engine and gear transmission oils

Contibutors: Perić, Sreten (author) / Nedić, Bogdan (author) / Trifković, Dragan (author) / Vuruna, Mladen (author)

1. PDF document (2012 kB)

Numbering: 2013, volume 59, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Design for reliability based methodology for automotive gearbox load capacity identification

Contibutors: Ognjanović, Milosav (author) / Milutinovic, Miroslav (author)

1. PDF document (3727 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Densification and geometrical assessments of alumina parts produced through indirect selective la...

Contibutors: Deckers, Jan (author) / Kruth, Jean-Pierre (author) / Cardon, Ludwig (author) / Shahzad, Khuram (author) / Vleugels, Jef (author)

1. PDF document (4825 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (58 kB)

Closed-loop handling stability of 4WS vehicle with yaw rate control

Contibutors: Lv, Hongming (author) / Liu, Shaona (author)

1. PDF document (1380 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Research on levitation coupled with standing wave levitation and electromagnetic levitation

Contibutors: Jiao, Xiao Yang (author) / Liu, GuoJun (author) / Liu, JianFang (author) / Li, Xinbo (author) / Liu, XiaoLun (author) / Lu, Song (author)

1. PDF document (2209 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Methods for improved flexural mechanical properties of 3D-plotted PCL-based scaffolds for heart v...

Contibutors: Ragaert, Kim (author) / De Somer, Filip (author) / Van de Velde, Stieven (author) / Degrieck, Joris (author) / Cardon, Ludwig (author)

1. PDF document (2093 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Effect of scratch velocity on deformation features of C-plane sapphire during nanoscratching

Contibutors: Feng, Pingfa (author) / Zhang, Chenglong (author) / Wu, Zhijun (author) / Zhang, Jianfu (author)

1. PDF document (2331 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Combined cutting-deforming taps

Contibutors: Stefanova Aleksandrova, Irina (author) / Nenkov Ganev, Gancho (author)

1. PDF document (1267 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

On-line oil monitoring and diagnosis

Contibutors: Salgueiro, José (author) / Peršin, Gabrijel (author) / Vižintin, Jože (author) / Ivanovič, Matic (author) / Dolenc, Boštjan (author)

1. PDF document (1621 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A study on the derivation of parametric cutting force equations in drilling of GFRP composites

Contibutors: Okutan, Eda (author) / Karabay, Sedat (author) / Sinmazçelik, Tamer (author) / Avcu, Egemen (author)

1. PDF document (2383 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Experimental investigation on road vehicle active suspension

Contibutors: Krishnasamy, Prabu (author) / Jayaraj, Jancirani (author) / John, Dennie (author)

1. PDF document (1218 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (18 kB)

Comparison of alcohol and fatty acid adsorption on hydrogenated DLC coatings studied by AFM and t...

Contibutors: Simič, Rok (author) / Kalin, Mitjan (author)

1. PDF document (2982 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

Speed-control of energy regulation based variable-speed electrohydraulic drive

Contibutors: Xu, Ming (author) / Jin, Bo (author) / Chen, Guojin (author) / Ni, Jing (author)

1. PDF document (2105 kB)

Numbering: 2013, volume 59, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analysing kinematics of a novel 3CPS parallel manipulator based on Rodrigues parameters

Contibutors: Cheng, Gang (author) / Xu, Peng (author) / Yang, De-hua (author) / Li, Hui (author) / Liu, Hou-guang (author)

1. PDF document (3371 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Pure waterjet drilling of articular bone

Contibutors: Dunnen, Steven den (author) / Kraaij, Gert (author) / Biskup, Christian (author) / Kerkhoffs, Gino M. M. J. (author) / Tuijthof, Gabrielle J. M. (author)

1. PDF document (1754 kB)

Numbering: 2013, volume 59, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Resource efficient injection moulding with low environmental impacts

Contibutors: Gantar, Gašper (author) / Glojek, Andrej (author) / Mori, Mitja (author) / Nardin, Blaž (author) / Sekavčnik, Mihael (author)

1. PDF document (2949 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Modelling of multi-mitigation strategies for maritime disruptions in the wheat supply chain

Contibutors: Gurning, Saut (author) / Cahoon, Stephen (author) / Dragović, Branislav (author) / Nguyen, Hong-Oanh (author)

1. PDF document (2236 kB)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

A new parameter of statistic equality of sampling lengths in surface roughness measurement

Contibutors: Tomov, Mite (author) / Kuzinovski, Mikolaj (author) / Cichosz, Piotr (author)

1. PDF document (2017 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Analysing energy and material saving technologies' adoption and adopters

Contibutors: Palčič, Iztok (author) / Pons, Marc (author) / Bikfalvi, Andrea (author) / Llach Pages, Josep (author) / Buchmeister, Borut (author)

Exergy based performance analysis of a shower cooling tower

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (757 kB)

1. TXT document (39 kB)

Contibutors: Qi, Xiaoni (author) / Liu, Yongqi (author) / Liu, Zhenyan (author)

1. PDF document (1259 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Powder-mixed electro-discharge diamond surface grinding process

Contibutors: Modi, Manoj (author) / Agarwal, Gopal (author)

1. PDF document (3660 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Study of vibration milling for improving surface finish of difficult-to-cut materials

Contibutors: Ostaševičius, Vytautas (author) / Gaidys, Rimvydas (author) / Dauksevicius, Rolanas (author) / Mikuckyte, Sandra (author)

1. PDF document (2245 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The use of the cavitation effect in the mitigation of CaCO sub 3 deposits

Contibutors: Heath, David John (author) / Širok, Brane (author) / Hočevar, Marko (author) / Pečnik, Boštjan (author)

1. PDF document (1159 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (62 kB)

Experimental and numerical investigations of the jaw crusher supporting structure fatigue failure

Contibutors: Rusiński, Eugeniusz (author) / Moczko, Przemysław (author) / Pietrusiak, Damian (author) / Przybyłek, Grzegorz (author)

1. PDF document (6168 kB)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Influence of different cooling and lubrication techniques on material machinability in machining

Contibutors: Sredanović, Branislav (author) / Globočki-Lakić, Gordana (author) / Cica, Djordje (author) / Kramar, Davorin (author)

1. PDF document (3729 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Detecting groan sources in drum brakes of commercial vehicles by TVA-FMEA

Contibutors: Karabay, Sedat (author) / Baynal, Kasim (author) / Igdeli, Cengiz (author)

1. PDF document (6112 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Scheduling for a single-terminal intermodal system recovery with Poisson arrivals

Contibutors: Marković, Nikola (author) / Schonfeld, Paul (author)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (966 kB)

Design and materials selection for environmentally friendly ship propulsion system

Contibutors: Roldo, Liane (author) / Komar, Ivan (author) / Vulić, Nenad (author)

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (629 kB)

A study of thermal behaviour during submerged arc welding

Contibutors: Ghosh, Aniruddha (author) / Barman, Nikanta (author) / Chattopadhyay, Himadri (author) / Hloch, Sergej (author)

1. PDF document (1036 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (19 kB)

Monitoring of injection moulding of thermoplastics

Contibutors: Speranza, Vito (author) / Vietri, Umberto (author) / Pantani, Roberto (author)

1. PDF document (2206 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Influence of rapid mould temperature variation on the appearance of injection-moulded parts

Contibutors: Lucchetta, Giovanni (author) / Fiorotto, Marco (author)

1. PDF document (1478 kB)

Numbering: 2013, volume 59, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Systematic development of a device for bituminous layer application

Contibutors: Benedičič, Janez (author) / Žavbi, Roman (author) / Duhovnik, Jože (author)

1. PDF document (1191 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Characterisation and processing of reinforced PA 6 with halloysite nanotubes (HNT) for injection ...

Contibutors: Fernandez, Angel (author) / Muniesa, Manuel (author) / González, Jaime (author)

1. PDF document (4686 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Hardness effects on abrasive flow machining

Contibutors: Gov, Kursad (author) / Eyercioglu, Omer (author) / Cakir, Mehmed Veysel (author)

1. PDF document (5829 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Integral characteristics of hydrogen production in alkaline electrolysers

Contibutors: Mori, Mitja (author) / Mržljak, Tilen (author) / Drobnič, Boštjan (author) / Sekavčnik, Mihael (author)

1. PDF document (2114 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Numerical simulation of cold forming of a-titanium alloy sheets

Contibutors: Jurendić, Sebastijan (author) / Gaiani, Silvia (author)

1. PDF document (1829 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Multivariable predictive functional control of an autoclave

Contibutors: Preglej, Aleksander (author) / Steiner, Igor (author) / Blažič, Sašo (author)

1. PDF document (1046 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

On the convergence, stability and computational speed of numerical schemes for 0-D IC engine cyli...

Contibutors: Katrašnik, Tomaž (author) / Schuemie, Henrik Aleš (author) / Wurzenberger, Johann C. (author)

1. PDF document (1671 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Ports sustainability

Contibutors: Vujičić, Andrija (author) / Zrnić, Nenad Đ. (author) / Jerman, Boris (author)

1. PDF document (1124 kB)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

A method for optimal blank shape determination in sheet metal forming based on numerical simulations

Contibutors: Mole, Nikolaj (author) / Cafuta, Gašper (author) / Štok, Boris (author)

1. PDF document (3846 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Neural network-based model for supporting the expert driven project estimation process in mold ma...

Contibutors: Florjanič, Blaž (author) / Govekar, Edvard (author) / Kuzman, Karl (author)

1. PDF document (2571 kB)

Numbering: 2013, volume 59, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Modification of conductive material AA6101 of OPGW conductors against lightning strikes

Contibutors: Karabay, Sedat (author)

1. PDF document (1884 kB)

Numbering: 2013, volume 59, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Dynamic reliability analysis of mechanical components based on equivalent strength degradation paths

Contibutors: Gao, Peng (author) / Yan, Shaoze (author) / Xie, Liyang (author) / Wu, Jianing (author)

1. PDF document (4396 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Study of a flowerlike deployable structure

Contibutors: Luo, Ani (author) / Liu, Heping (author) / Li, Cheng (author) / Wang, Yongfan (author)

1. PDF document (1540 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)