dLib.si - search results

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

Effect of severe plastic and heavy cold deformation on the structural and mechanical properties o...

Contibutors: Palán, Jan (author) / Šutta, P. (author) / Kubina, Tomáš (author) / Dománková, Mária (author)

1. PDF document (1140 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Comparison of the surface and anticorrosion properties of SiOsub2 and TiOsub2 nanoparticle epoxy ...

Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)

Increasing the wear resistance of Al-Mg components using thermal-spray coatings

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (541 kB)

1. TXT document (30 kB)

Contibutors: Lukauskaitë, Raimonda (author) / Černašejus, Olegas (author) / Škamat, Jelena (author) / Asadauskas, Svajus (author) / Ručinskienë, Alma (author) / Kalpokaitë-Dičkuvienë, Regina (author) / Višniakov, Nikolaj (author)

Programabilni kristalni oscilator visoke razločljivosti

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

1. TXT document (30 kB)

Contibutors: Koležnik, Janko (author) / Vlaovič, Boštjan (author)

Numbering: 2017, volume 84, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (757 kB)

Minimization of energy losses in ultra-high-speed electrical rotating machines

Contibutors: Ismagilov, Flur R. (author) / Khayrullin, Irek Kh. (author) / Vavilov, Vyacheslav Ye. (author) / Bekuzin, Vladimir I. (author) / Ayguzina, Valentina V. (author)

Numbering: 2017, volume 84, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (423 kB)

Laser welding of the new grade of advanced high-strength steel Domex 960

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Lisiecki, Aleksander (author)

1. PDF document (4387 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate

Contibutors: Maretić, Mauro (author) / Smoljan, Božidar (author) / Iljkić, Dario (author)

Impacts of different factors on seepage and land uplift due to compressed-air injection

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (948 kB)

1. TXT document (24 kB)

Contibutors: Yongge, Zang (author)

1. PDF document (7509 kB)

Numbering: 2017, volume 14, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Impact of plug-in electric vehicles and photovoltaic technologies on the power distribution network

Contibutors: Memisevic, Belmin (author) / Masic, Fatima (author) / Bosovic, Adnan (author) / Music, Mustafa (author)

Numbering: 2017, volume 84, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (643 kB)

The effect of current types on the microstructure and corrosion properties of Ni/nanoAlsub2Osub3 ...

Contibutors: Kucharska, Beata (author) / Krawczynska, Agnieszka (author) / Rożniatowski, Krzysztof (author) / Zdunek, Joanna (author) / Poplawski, Karol (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (5584 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of holding time on the production of Nb-NbAl3 intermetallic composites via electric-curren...

Contibutors: Aybey, Muhammed (author) / Yener, Tuba (author) / Ipek, Mediha (author) / Zeytin, Sakin (author)

1. PDF document (1282 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (15 kB)

A direct power control of the doubly-fed induction generator based on the SVM Strategy

Contibutors: Massoum, Sarra (author) / Meroufel, Abdelkader (author) / Massoum, Ahmed (author) / Wira, Patrice (author)

Gelling polysaccharide as the electrolyte matrix in a dye-sensitized solar cell

Numbering: 2017, volume 84, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (594 kB)

1. TXT document (17 kB)

Contibutors: Bantang, Jose Paolo (author) / Camacho, Drexel (author)

Formation of Ni-Ti intermetallics during reactive sintering at 800-900 °C

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (890 kB)

1. TXT document (71 kB)

Contibutors: Novák, Pavel (author) / Vladimír, Vojtěch (author) / Průša, Filip (author) / Pokorný, Petr (author) / Salvetr, Pavel (author) / Knaislová, Anna (author) / Nová, Kateřina (author)

1. PDF document (1498 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Quality control for the construction of a tailings dam

Contibutors: Tschuschke, Wojciech (author) / Wróżyńska, Magdalena (author) / Wierzbicki, Jędrzej (author)

Numbering: 2017, volume 14, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (310 kB)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Future Generation IV SMR reactors

Contibutors: Buršič, Aleš (author) / Žagar, Tomaž (author)

1. PDF document (3440 kB)

Numbering: 2017, volume 10, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Economic effects of renewable energy technologies

Contibutors: Maradin, Dario (author) / Cerović, Ljerka (author) / Mjeda, Trina (author)

Source: Naše gospodarstvo

Numbering: 2017, volume 63, issue 2

Provider: Univerza v Mariboru, Ekonomsko-poslovna fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

1. TXT document (50 kB)

Vpliv zmanjšanja simulacijskega volumna na napako in hitrost izračunov reflektance z metodo Monte...

Contibutors: Bürmen, Miran (author)

Analysis of the fiber distribution, size, and volume ratio of unidirectional composite plates wit...

Numbering: 2017, volume 84, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (406 kB)

1. TXT document (22 kB)

Contibutors: Zemčík, Robert (author) / Srbová, Hana (author) / Ekštein, Kamil (author) / Pirner, Ivan (author) / Medlín, Rostislav (author)

1. PDF document (5357 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Optimum bushing length in thermal drilling of galvanized steel using artificial neural network co...

Contibutors: Hynes, Navasingh Rajesh Jesudoss (author) / Kumar, Ramar (author) / Sujana, Jebaraj Angela Jennifa (author)

1. PDF document (2122 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (86 kB)

Elektrode iz ogljikove paste za analizo težkih kovin

Contibutors: Petovar, Barbara (author) / Finšgar, Matjaž (author)

Source: Vakuumist

Numbering: 2017, volume 37, issue 2

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (147 kB)

1. TXT document (20 kB)

Uporaba Mayrjevega modela pri simulaciji električnega obloka

Contibutors: Sarajlić, Mirza (author) / Ribič, Janez (author) / Kitak, Peter (author) / Pihler, Jože (author)

1. PDF document (1013 kB)

Numbering: 2017, volume 84, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Influence of a cryogenic treatment on the fracture toughness of an AISI 420 martensitic stainless...

Contibutors: Prieto, G. (author) / Tuckart, Walter (author) / Ipina, J. E. Pérez (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Izračun merilne negotovosti umerjanja referenčnega upora z metodo Monte Carlo

Contibutors: Žužek, Vincencij (author)

Teorija upogiba palice in upogibni preizkus

Numbering: 2017, volume 84, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (233 kB)

1. TXT document (14 kB)

Contibutors: Ambrožič, Milan (author)

Source: Vakuumist

Numbering: 2017, volume 37, issue 1

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (259 kB)

Sanitarno inženirstvo (2017, volume 11, issue 1)

Source: Sanitarno inženirstvo

Provider: Inštitut za sanitarno inženirstvo
(Obvezni izvod spletne publikacije)

1. 216969216_2017_11_1 (4715 kB)

1. TXT document (250 kB)

Informacije MIDEM (2017, volume 47, issue 1)

Source: Informacije MIDEM

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (14 MB)

1. TXT document (192 kB)

Distribution of Alsub2Osub3 reinforcement particles in austenitic stainless steel depending on th...

Contibutors: Kračun, Ana (author) / Podgornik, Bojan (author) / Tehovnik, Franc (author) / Kafexhiu, Fevzi (author) / Jenko, Darja (author)

1. PDF document (3935 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

A seven-core fibre for fluorescence spectroscopy

Contibutors: Samir, Ahmed (author) / Batagelj, Boštjan (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1300 kB)

Corrosion on polished and laser-textured surfaces of an Fe-Mn biodegradable alloy

Contibutors: Hočevar, Matej (author) / Donik, Črtomir (author) / Paulin, Irena (author) / Kocijan, Aleksandra (author) / Tehovnik, Franc (author) / Burja, Jaka (author) / Gregorčič, Peter (author) / Godec, Matjaž (author)

1. PDF document (2931 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

Rheological properties of feedstocks and the structure of injection moulders for sintering compos...

Contibutors: Golombek, K. (author) / Matula, G. (author) / Stamenković, Dragomir (author) / Mikula, Jarosław (author) / Soković, Mirko (author)

1. PDF document (2745 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Rock burst dependency on the type of steel arch support in the Velenje mine

Contibutors: Vižintin, Goran (author) / Mayer, Janez (author) / Lajlar, Bojan (author) / Vukelič, Željko (author)

1. PDF document (3191 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

A method for modeling a common-mode impedance for the AC motor

Contibutors: Miloudi, Houcine (author) / Bendaoud, Abdelber (author) / Miloudi, Mohamed (author)

Numbering: 2017, volume 84, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (299 kB)

Deformation and improvement of the IR transmission of single-crystal silicon by direct current he...

Contibutors: Miura, Kiyotaka (author) / Shimotsuma, Yasuhiko (author) / Sakakura, Masaaki (author) / Gunji, Shunsuke (author) / Sakamoto, Taiki (author) / Morishita, Kohei (author) / Hachinohe, Satoru (author)

1. PDF document (2413 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Journal of energy technology (2017, volume 10, issue 2)

1. PDF document (5765 kB)

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (121 kB)

Dynamic simulation of an induction-motor centrifugal-pump system under variable speed conditions

Contibutors: Guo, Xiwen (author) / Wu, Yuliang (author) / Li, Guoli (author) / Lu, Chao (author)

Numbering: 2017, volume 84, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

Lacunarity properties of nanophotonic materials based on poly(methyl methacrylate) for contact le...

Contibutors: Tomić, Marija (author) / Bojović, Božica (author) / Stamenković, Dragomir (author) / Mileusnić, Ivana (author) / Koruga, Djuro (author)

1. PDF document (1052 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of tool geometry and welding parameters on the microstructure and static strength of the f...

Contibutors: Abedini, Omid (author) / Ranjbarnodeh, Eslam (author) / Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (3418 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A new low-power CMOS sample-and-hold circuit based on high-speed dynamic body biased switches

Contibutors: Hasan-Sagha, Mohamad (author) / Jalali, Mohsen (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1515 kB)

1. TXT document (20 kB)

Increasing the tensile strength and elongation of 16MnCrS5 steel using genetic programming

Contibutors: Kovačič, Miha (author) / Turnšek, Ana (author) / Ocvirk, Darja (author) / Gantar, Gašper (author)

Investigation of the static icing property for super-hydrophobic coatings on aluminium

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (831 kB)

1. TXT document (53 kB)

Contibutors: Jin, Hai Yun (author) / Nie, Shi Chao (author) / Li, Yu Feng (author) / Xu Feng, Tian (author) / Zhang, Peng (author) / Li, Wen (author)

Rotor mechanical stress analysis of a double-sided axial flux permanent magnet machine

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (887 kB)

1. TXT document (40 kB)

Contibutors: Pranjić, Franjo (author) / Virtič, Peter (author)

1. PDF document (2058 kB)

Numbering: 2017, volume 10, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

Space transformer connector characterization for a wafer test system

Contibutors: Tunaboylu, Bahadir (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (653 kB)

Selective leaching and surface properties of TiNiFe shape-memory alloys

Contibutors: Chang, Shih-Hang (author) / Liou, Jyun-Sian (author)

1. PDF document (1234 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A review of the surface modifications of titanium alloys for biomedical applications

Contibutors: Manjaiah, Mallaiah (author) / Laubscher, R. F. (author)

1. PDF document (1360 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (71 kB)

Solving dual flexible job-shop scheduling problem using a Bat Algorithm

Contibutors: Xu, H. (author) / Bao, Z. R. (author) / Zhang, Tao (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (528 kB)

1. TXT document (38 kB)

Properties and structures of bulk metallic glasses based on magnesium

Contibutors: Kiljan, Anna (author) / Nowosielski, Ryszard (author) / Babilas, Rafał (author)

1. PDF document (2292 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (18 kB)

The use of natural sepiolite fiber in concrete

Contibutors: Koltka, Selçuk (author) / Uygunoglu, Tayfun (author) / Sabah, Eyüp (author) / Can, Muhammed Fatih (author)

1. PDF document (2029 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

The effect of protective atmosphere on decarburisation of the heat-treated surface of steel

Contibutors: Tonkovič-Prijanovič, Marica (author) / Knez, Miha (author)

1. PDF document (1064 kB)

Numbering: 2017, volume 64, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Analysis of precipitates in aluminium alloys with the use of high-resolution electron microscopy ...

Contibutors: Matus, Krzysztof (author) / Tomiczek, Anna (author) / Gołombek, Klaudiusz (author) / Pawlyta, Mirosława (author)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (941 kB)

2D numeric simulation of serrated-chip formation in orthogonal cutting of AISI316H stainless steel

Contibutors: Gok, Arif (author)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (760 kB)

Effect of cutting parameters on the drilling of AlSi7 metallic foams

Contibutors: Uzun, Gultekin (author) / Gokmen, Ugur (author) / Cinici, Hanifi (author) / Turker, Mehmet (author)

The internal and external dipole moment of a water molecule and orientational ordering of water d...

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (924 kB)

1. TXT document (27 kB)

Contibutors: Drab, Mitja (author) / Gongadze, Ekaterina (author) / Mesarec, Luka (author) / Kralj, Samo (author) / Kralj-Iglič, Veronika (author) / Iglič, Aleš (author)

1. PDF document (3941 kB)

Numbering: 2017, volume 84, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

Short-term creep of P91 heat-resistant steels at low stresses and an instantaneous-stress-change ...

Contibutors: Zhe, Jiang (author) / Junjie, Shen (author) / Pengshuo, Zhao (author)

1. PDF document (1014 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Biomehanska povratna zanka z delovanjem v realnem času

Contibutors: Umek, Anton (author) / Kos, Anton (author) / Tomažič, Sašo (author)

Numbering: 2017, volume 84, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (692 kB)

Reliability of system for precise cold forging

Contibutors: Krušič, Vid (author) / Rodič, Tomaž (author)

1. PDF document (1041 kB)

Numbering: 2017, volume 64, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Design and characterization of a 130 nm CMOS ultra-wideband low-noise amplifier

Contibutors: Pajkanović, Aleksandar (author) / Videnović-Misić, Mirjana (author) / Stojanović, Goran M. (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2483 kB)

1. TXT document (45 kB)

The calculation of high-pressure viscosity for refrigerant mixtures

Contibutors: Avsec, Jurij (author) / Novosel, Urška (author)

Influence of shading on I-V characteristics of thin film PV modules

Numbering: 2017, volume 10, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (661 kB)

1. TXT document (14 kB)

Contibutors: Žnidarec, Matej (author) / Topić, Danijel (author) / Bušić, Josip (author)

Numbering: 2017, volume 10, iss. 1

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (495 kB)

Influence of stainless-steel wire mesh on the mechanical behaviour in a glass-fibre-reinforced ep...

Contibutors: Sakthivel, Munisamy (author) / Vijayakumar, Subramani (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (847 kB)

Durability of materials based on a polymer-silicate matrix and a lightweight aggregate exposed to...

Contibutors: Melichar, Tomáš (author) / Bydžovský, Jiří (author) / Dufka, Ámos (author)

1. PDF document (2439 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (66 kB)

Journal of energy technology (2017, volume 10, issue 3)

A method for modeling a common-mode impedance for the AC motor

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (12 MB)

1. TXT document (98 kB)

Contibutors: Miloudi, Houcine (author) / Bendaoud, Abdelber (author) / Miloudi, Mohamed (author)

Numbering: 2017, volume 84, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. 298592512 (299 kB)

Sprememba gostote energije v zemeljskem magnetnem polju

Contibutors: Čop, Rudi (author)

Numbering: 2017, volume 84, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (616 kB)

Effect of the mode and dynamics of thermal processes on DSC-acquired phase-change temperature and...

Contibutors: Fořt, Jan (author) / Pavlík, Zbyšek (author) / Trník, Anton (author) / Pavlíkova, Milena (author) / Černý, Robert (author)

Assessments of the hydraulic conductivity for predicting the swelling characteristics of compacte...

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (496 kB)

1. TXT document (63 kB)

Contibutors: Güneyli, Hakan (author)

1. PDF document (2535 kB)

Numbering: 2017, volume 14, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. TXT document (64 kB)

Comparison of homogenization approaches used for the identification of the material parameters of...

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Lukeš, Vladimir (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (936 kB)

Investigation of the geometrical accuracy and thickness distribution using 3d laser scanning of A...

Contibutors: Bayram, Halil (author) / Köksal, Nurullah Sinan (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (816 kB)

Experience in design and construction of the Log tunnel

Contibutors: Jovičić, Vojkan (author) / Goleš, Niko (author) / Tori, Matija (author) / Peternel, Miha (author) / Vajović, Stanojle (author) / Muhić, Elvir (author)

1. PDF document (1548 kB)

Numbering: 2017, volume 64, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Corrosion resistance of as-plated and heat-treated electroless dublex Ni-P/Ni-B-W coatings

Contibutors: Yüksel, Behiye (author) / Erdogan, Garip (author) / Baştan, Fatih Erdem (author) / Yildiz, Ahmet (author)

1. PDF document (1369 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

The development of new types of secondary protection for concrete structures exposed to extreme c...

Contibutors: Dufka, Ámos (author) / Melichar, Tomáš (author) / Bydžovský, Jiří (author) / Vaněrek, Jan (author)

1. PDF document (2780 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

IR-spektroskopija za površine in trdne snovi: ATR-IR in bližnja-IR odbojna spektroskopija

Contibutors: Sotlar, Selena (author) / Finšgar, Matjaž (author)

Source: Vakuumist

Numbering: 2017, volume 37, issue 1

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (394 kB)

Journal of energy technology (2017, volume 10, issue 4)

Impact toughness of laser-welded butt joints of the new steel grade STRENX 1100MC

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (10 MB)

1. TXT document (148 kB)

Contibutors: Kurc-Lisiecka, Agnieszka (author)

1. PDF document (8261 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Tehnološke zahteve za kombajne na njivah s konopljo v Sloveniji

Contibutors: Pahole, Ivo (author) / Pal, Matej (author) / Belca, Urban (author) / Belšak, Aleš (author)

Source: Hmeljarski bilten

Numbering: 2017, letn. 24

Provider: Inštitut za hmeljarstvo in pivovarstvo Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (763 kB)

1. TXT document (18 kB)

Nova odkritja o začetkih elektrifikacije Slovenije

Contibutors: Jarh, Orest (author) / Rezar Grilc, Barbara (author)

Effect of yttrium and zirconium microalloying on the structure and properties of weld joints of a...

Numbering: 2017, volume 84, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (501 kB)

1. TXT document (9 kB)

Contibutors: Illarionov, Anatoly (author) / Popov, Artemy (author) / Illarionova, Svetlana (author) / Gadeev, Dmitry (author)

1. PDF document (2331 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

DOE study of epitaxial layer thickness and resistivity effects on P-i-N diode for beyond 300 V of...

Contibutors: See, J. H. (author) / Arshad, Mohd Khairuddin Md (author) / Fathil, M. F. M. (author) / Voon, C. H. (author) / Hashim, U. (author) / Gopinath, Subash C. B. (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1471 kB)

Surface characteristics of Invar alloy according to micro-pulse electrochemical machining

Contibutors: Kim, Seong-Hyun (author) / Choi, Seung-Geon (author) / Choi, Woong-Kirl (author) / Lee, Eun-Sang (author)

1. PDF document (2298 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Stress-dilatancy behavior of sand incorporating particle breakage

Contibutors: Yu, Fangwei (author)

1. PDF document (1860 kB)

Numbering: 2017, volume 14, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

Research in the Laboratory of Thermomechanics, Applied Thermal Energy, and Nanotechnologies

Contibutors: Avsec, Jurij (author) / Novosel, Urška (author)

1. PDF document (2194 kB)

Numbering: 2017, volume 10, iss. 3

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (14 kB)

Determining the heat-transfer coefficient in an isothermal model of a shaft furnace

Contibutors: Čarnogurská, Mária (author) / Dobáková, Romana (author) / Brestovič, Tomáš (author) / Příhoda, Miroslav (author)

1. PDF document (1575 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Application of terrestrial laser scanning in documenting an underground coal mine pumping station

Contibutors: Rošer, Janez (author)

Performance of nano-filtration and reverse osmosis processes for wastewater treatment

Numbering: 2017, volume 64, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (846 kB)

1. TXT document (27 kB)

Contibutors: Al-Jlil, Saad A. (author)

Time-lapse micro-tomography analysis of the deformation response of a gellan-gum-based scaffold

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (607 kB)

1. TXT document (38 kB)

Contibutors: Kytýř, Daniel (author) / Fenclová, Nela (author) / Zlámal, Petr (author) / Kumpová, Ivana (author) / Fíla, Tomáš (author) / Koudelka, Petr (author) / Gantar, Ana (author) / Novak, Saša (author)

1. PDF document (1319 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A straightforward analytical way of evaluating the single-phase inverter SPWM requency spectrum

Contibutors: Hren, Alenka (author) / Mihalič, Franc (author)

Numbering: 2017, volume 10, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (875 kB)

Cavitation erosion properties of a nickel-free high-nitrogen Fe-Cr-Mn-N stainless steel

Contibutors: Qiao, Yanxin (author) / Cai, Xiang (author) / Chen, Yipeng (author) / Cui, Jie (author) / Tang, Yanbing (author) / Li, Huabing (author) / Jiang, Zhouhua (author)

1. PDF document (1366 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

The effect of thermo-mechanical processing on the structure, static mechanical properties and fat...

Contibutors: Kubásek, Jiří (author) / Vojtěch, Dalibor (author) / Dvorský, Drahomír (author)

1. PDF document (3551 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Effect of particles size on the mechanical properties of SiC-reinforced aluminium 8011 composites

Contibutors: Ashok, Nagaraj (author) / Shanmughasundaram, Palanisamy (author)

1. PDF document (1120 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Miswak (Salvadora Persica roots): discovery of a new biomaterial for removing heavy metals from w...

Contibutors: Aljlil, Saad A. (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (187 kB)

Analysis of outdoor LED lighting's dimming influence on the performance of LED drivers

Contibutors: Perko, Jurica (author) / Pelin, Denis (author) / Topić, Danijel (author)

1. PDF document (1956 kB)

Numbering: 2017, volume 10, iss. 3

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Influence of alloying elements on the mechanical properties of a cobalt-based alloy produced with...

Contibutors: Nová, Kateřina (author) / Novák, Pavel (author) / Dvorský, Drahomír (author)

1. PDF document (1692 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Karakterizacija in kritično vrednotenje fluorimetrične sonde iz sedemjedrnega optičnega vlakna

Contibutors: Samir, Ahmed (author) / Batagelj, Boštjan (author)

Numbering: 2017, volume 84, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (396 kB)

Small signal modeling of scaled double-gate MOSFET for GHz applications

Contibutors: Sood, Himangi (author) / Srivastava, Viranjay M. (author) / Singh, Ghanshyam (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1606 kB)

Dimensional accuracy of prototypes made with FDM technology

Contibutors: Tomić, Davor (author) / Fudurić, Ana (author) / Mihalić, Tihomir (author) / Šimunić, Nikola (author)

1. PDF document (1007 kB)

Numbering: 2017, volume 10, iss. 2

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Effects of particle characteristics on the shear strength of calcareous sand

Contibutors: Giang, Pham Huu Ha (author)

1. PDF document (6476 kB)

Numbering: 2017, volume 14, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...

Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)

1. PDF document (1238 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)