Digitalna knjižnica Slovenije

Numbering: 2002, volume 48, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (196 kB)

Hyper-chaotic mapping Newton iterative method to mechanism synthesis

Contibutors: Youxin, Luo (author) / Fan, Xianfeng (author) / Li, Dazhi (author) / Wu, Xiao (author)

Metoda raziskave nelinearnih upogibov valjev pri rotacijskem ofsetnem tiskarskem stroju

Numbering: 2008, volume 54, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (216 kB)

1. TXT document (24 kB)

Contibutors: Augustaitis, Vytautas Kazimieras (author) / Šešok, Nikolaj (author) / Iljin, Igor (author)

Določevanje nevtralne točke pri ploskovnem valjanju

Numbering: 2006, volume 52, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (492 kB)

1. TXT document (70 kB)

Contibutors: León, J. (author) / Luis, C.J. (author) / Luri, R. (author) / Reyero, J. (author)

The universal grey transfer matrics method and its application in calculating the natural frequen...

Numbering: 2007, volume 53, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (290 kB)

1. TXT document (26 kB)

Contibutors: Luo, You-Xin (author) / Huang, Hong-Zhong (author) / Fan, Xianfeng (author)

Numbering: 2006, volume 52, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (133 kB)

Metoda robnih elementov za dinamiko viskoelastične Maxwellove tekočine

Contibutors: Škerget, Leopold (author) / Požarnik, Matej (author)

Dinamični model rotorskega sistema z gibkim členom in dvema neosnima gredama

Numbering: 2002, volume 48, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (363 kB)

1. TXT document (65 kB)

Contibutors: Bogdevičius, Marijonas (author) / Spruogis, Bronislovas (author) / Turla, Vytautas (author)

Dinamično odzivanje valjaste cevi na gibajoči se tlak

Numbering: 2004, volume 50, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (771 kB)

1. TXT document (49 kB)

Contibutors: Saranjam, Bahador (author) / Bakhshandeh, Kambiz (author) / Kadivar, Mohammad-Hassan (author)

Toplotne izgube v tla pri stavbah glede na standard SIST EN ISO 13370 - poenostavljena metoda izr...

Numbering: 2007, volume 53, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (420 kB)

1. TXT document (34 kB)

Contibutors: Černe, Boštjan (author) / Medved, Sašo (author)

Measurement uncertainty in calibration of measurement surface plates flatness

Numbering: 2001, volume 47, issue 7

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (321 kB)

1. TXT document (37 kB)

Contibutors: Gusel, Andrej (author) / Ačko, Bojan (author) / Mudronja, Vedran (author)

Metoda robnih elementov v akustiki - primer ovrednotenja zvočnega polja enosmernega elektromotorja

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (345 kB)

1. TXT document (21 kB)

Contibutors: Furlan, Martin (author) / Boltežar, Miha (author)

Nova metoda za določevanje krivulje mejnih deformacij v digitalnem okolju

Numbering: 2004, volume 50, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (614 kB)

1. TXT document (57 kB)

Contibutors: Petek, Aleš (author) / Pepelnjak, Tomaž (author) / Kuzman, Karl (author)

1. PDF document (1061 kB)

Numbering: 2005, volume 51, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (58 kB)

Analiza vpliva prometnega toka pešcev na prepustno zmožnost krožišča z uporabo diskretnih simulacij

Contibutors: Tollazzi, Tomaž (author) / Lerher, Tone (author) / Šraml, Matjaž (author)

Analiza deformacij vrtal po analitični metodi in s končnimi elementi

Numbering: 2006, volume 52, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (780 kB)

1. TXT document (76 kB)

Contibutors: Taşkesen, Ahmet (author) / Mendi, Faruk (author) / Kisioglu, Yasin (author) / Kulekci, Mustafa Kemal (author)

Equivalent stress analysis of processing tube tension reducing of the new steel 33Mn2V for oil we...

Numbering: 2006, volume 52, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (281 kB)

1. TXT document (29 kB)

Contibutors: Wang, Fuzhong (author) / Lu, Lu (author) / Zhang, Huichun (author) / Fei, Ying (author) / Liu, Guoquan (author) / Ai, Jiahe (author)

Konstruiranje izdelka s pomočjo tehnike optimizacije stika

Numbering: 2008, volume 54, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (385 kB)

1. TXT document (13 kB)

Contibutors: Páczelt, István (author) / Baksa, Attila (author) / Szabó, Tamás (author)

Primerjalna analiza preračuna prednje preme po metodi končnih elementov in standardu DIN743

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (887 kB)

1. TXT document (46 kB)

Contibutors: Okorn, Ivan (author) / Bešter, Tomaž (author) / Orbanić, Petar (author) / Fajdiga, Matija (author)

Numbering: 2006, volume 52, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (392 kB)

Characterization and determination of mechanical properties of YBCO superconducting thin films wi...

Contibutors: Culha, Osman (author) / Birlik, Isil (author) / Toparli, Mustafa (author) / Celik, Erdal (author) / Engel, Sebastian (author) / Holzapfel, Bernhard (author)

Določitev tornega količnika v brazdah z napetostno funkcijo

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (471 kB)

1. TXT document (36 kB)

Contibutors: Imrak, Cevat Erdem (author) / Gerdemeli, Ismail (author)

Modeliranje sestavov kovine in elastomerov z uporabo postopka končnih elementov

Numbering: 2007, volume 53, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (145 kB)

1. TXT document (17 kB)

Contibutors: Floody, Sergio E. (author) / Arenas, Jorge, P. (author) / de Espindola, Jose J. (author)

Effect of preheating on mechanical properties in induction sintering of metal-powder material Fe ...

Numbering: 2007, volume 53, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (288 kB)

1. TXT document (42 kB)

Contibutors: Akpinar, Göksan (author) / Atik, Enver (author)

1. PDF document (3986 kB)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of particles size on the mechanical properties of SiC-reinforced aluminium 8011 composites

Contibutors: Ashok, Nagaraj (author) / Shanmughasundaram, Palanisamy (author)

1. PDF document (1120 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Vpliv različnih parametrov na trdnostni preračun toplotno obremenjenega žarometa

Contibutors: Wagner, Andrej (author) / Bučar, Tomaž (author) / Fajdiga, Matija (author)

Numbering: 2006, volume 52, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (703 kB)

Cognitive product development

Contibutors: Gielingh, Wim (author)

1. PDF document (2587 kB)

Numbering: 2008, volume 54, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (43 kB)

Drugačna metoda določevanja koncentracij plinov zaprtih prostorov v odvisnosti od časa

Contibutors: Likar, Jakob (author) / Čadež, Jurij (author)

The Galerkin method solution of the conjugate heat transfer problems for the cross-flow conditins

Numbering: 2001, volume 47, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (173 kB)

1. TXT document (21 kB)

Contibutors: Horvat, Andrej (author) / Mavko, Borut (author) / Catton, Ivan (author)

Numbering: 2005, volume 51, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (257 kB)

Vrednotenje termomehansko obremenjenih izdelkov z deformacijskim pristopom

Contibutors: Rosa, Uroš (author) / Nagode, Marko (author) / Fajdiga, Matija (author)

Meritev izkoristka in nastavitev krmilnih parametrov kaplanove turbine z dolgim cevnim sistemom s...

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (435 kB)

1. TXT document (53 kB)

Contibutors: Trebše, Andrej J. (author)

Numbering: 2004, volume 50, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (299 kB)

The constructive and geometrical optimization of the junctions in structures made from laminated ...

Contibutors: Hadar, Anton (author) / Nica, Mariana N. (author) / Constantinescu, Ioan N. (author) / Pastrama, Stefan Dan (author)

Study of the microstructures and mechanical properties of aluminium hybrid composites with SiC an...

Numbering: 2006, volume 52, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (411 kB)

1. TXT document (15 kB)

Contibutors: Pugalenthi, Palanisamy (author) / Jayaraman, Murugesan (author) / Subburam, Venkatajalapathy (author)

1. PDF document (1889 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Siskov model toka nenewtonskih tekočin z metodo končnih prostornin

Contibutors: Delić, Marjan (author) / Marn, Jure (author) / Žunič, Zoran (author)

Numerical simulation of crack modeling using extended finite element method

Numbering: 2002, volume 48, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (220 kB)

1. TXT document (26 kB)

Contibutors: Jovičić, Gordana (author) / Živković, Miroslav (author) / Jovičić, Nebojša (author)

The application of the root locus method for the design of pitch controller of an F-104A aircraft

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (474 kB)

1. TXT document (18 kB)

Contibutors: Stojiljković, Branimir (author) / Vasov, Ljubiša (author) / Mitrović, Časlav (author) / Cvetković, Dragan (author)

Effects of an addition of coir-pith particles on the mechanical properties and erosive-wear behav...

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (373 kB)

1. TXT document (19 kB)

Contibutors: Jose, Arul Sujin (author) / Athijayamani, Ayyanar (author) / Ramanathan, Kalimuthu (author) / Sidhardhan, Susaiyappan (author)

Heat transfer during transverse air flow around a cylinder

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (805 kB)

1. TXT document (57 kB)

Contibutors: Nowak, Wĺadyslaw (author) / Stachel, Aleksander A. (author)

Večkriterialno optimiranje avtomobilske konstrukcije z uporabo metode končnih elementov

Numbering: 2005, volume 51, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (569 kB)

1. TXT document (26 kB)

Contibutors: Glavač, Matej (author) / Ren, Zoran (author)

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (304 kB)

Sinteza orodij za analizo človeške napake po metodi analize spoznavne zanesljivosti in napak ter ...

Contibutors: Zupančič, Janja (author) / Marn, Jure (author)

1. PDF document (1131 kB)

Numbering: 2002, volume 48, issue 8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (77 kB)

Izboljšanje dinamičnih značilnosti rotorskega sistema z razvojnim algoritmom

Contibutors: Saruhan, Hamit (author)

Improving the microstructure and mechanical properties of magnesium-alloy sheets with a new extru...

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (971 kB)

1. TXT document (54 kB)

Contibutors: Lu, Liwei (author) / Yin, Zhenru (author) / Liu, Yanfeng (author) / Dandan, Chen (author) / Liu, Chuming (author) / Wu, Zhiqiang (author)

1. PDF document (1751 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Linear two-scale model for determining the mechanical properties of a textile composite material

Contibutors: Kroupa, Tomáš (author) / Janda, Petr (author) / Zemčík, Robert (author)

Release of halophilic extremozymes by mechanical cell disruption

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

1. TXT document (13 kB)

Contibutors: Primožič, Mateja (author) / Čolnik, Maja (author) / Knez, Željko (author) / Leitgeb, Maja (author)

Source: Acta chimica slovenica

Numbering: 2019, volume 66, issue 1

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (1043 kB)

1. TXT document (56 kB)

FDM process parameter selection by hybrid MCDM approach for flexural and compression strength max...

Contibutors: Begić-Hajdarević, Đerzija (author) / Klančnik, Simon (author) / Muhamedagić, K. (author) / Čekić, Ahmet (author) / Cohodar Husic, Maida (author) / Ficko, Mirko (author) / Gusel, Leo (author)

Source: Advances in production engineering and management

Numbering: 2024, volume 19, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (636 kB)

Analytical, numerical 1D and 3D water hammer investigations in a simple pipeline apparatus

Contibutors: Bergant, Anton (author) / Rek, Zlatko (author) / Urbanowicz, Kamil (author)

Finite element analysis of a tire steady rolling on the drum and comparison with experiment

Numbering: 2025, volume 71, issue 5/6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (817 kB)

1. TXT document (50 kB)

Contibutors: Korunović, Nikola (author) / Trajanović, Miroslav (author) / Stojković, Miloš (author) / Mišić, Dragan (author) / Milovanović, Jelena (author)

1. PDF document (2818 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Computation method in failure analysis of mechanically fastened joints at layered composits

Contibutors: Ilić, Ivana (author) / Petrović, Zlatko (author) / Maksimović, Mirko (author) / Stupar, Slobodan (author) / Stamenković, Dragi (author)

1. PDF document (2696 kB)

Numbering: 2012, volume 58, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Parametric optimization of the output shaft of a portal axle using finite element analysis

Contibutors: Ooi, Jong Boon (author) / Wang, Xin (author) / Lim, Ying Pio (author) / Tan, ChingSeong (author) / Ho, Jee-Hou (author) / Wong, Kok-Cheong (author)

1. PDF document (1568 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Theoretical and experimental study of fatigue strength of plain woven glass/epoxy composite

Contibutors: Movaghghar, Ali (author) / Lvov, Gennady Ivanovich (author)

1. PDF document (1079 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Experimental analysis of the deviation from circularity of bored hole based onthe Taguchi method

Contibutors: Korkut, Ihsan (author) / Kucuk, Yilmaz (author)

Modeling nonlinear viscoelastic nanoindentation of PVAc at different unloading rates

Numbering: 2010, volume 56, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (154 kB)

1. TXT document (23 kB)

Contibutors: Kucuk, Yilmaz (author)

1. PDF document (1253 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Dynamic model for the stress and strain state analysis of a spur gear transmission

Contibutors: Nikolić-Stanojević, Vera (author) / Dolićanin, Ćemal (author) / Dimitrijević, Dejan (author)

1. PDF document (3899 kB)

Numbering: 2012, volume 58, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Boundary layer method for unsteady transonic flow

Contibutors: Majić, Frane (author) / Voss, Ralph (author) / Virag, Zdravko (author)

1. PDF document (1005 kB)

Numbering: 2012, volume 58, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Overall structure calibration of 3-UCR parallel manipulator based on quaternion method

Contibutors: Cheng, Gang (author) / Gu, Wei (author) / Yu, Jing-li (author) / Tang, Ping (author)

1. PDF document (1379 kB)

Numbering: 2011, volume 57, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Use of genetic algorithms for optimal design of sandwich panels subjected to underwater shock loa...

Contibutors: Salimi, Hamidreza (author) / Saranjam, Bahador (author) / Fard, Ahmad Hoseini (author) / Ahmadzadeh, Mohsen (author)

1. PDF document (2361 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Taguchi-based and intelligent optimisation of a multi-response process using historical data

Contibutors: Šibalija, Tatajana (author) / Majstorović, Vidosav D. (author) / Soković, Mirko (author)

The possibility for FMEA method improvement and its implementation into bus life cycle

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (379 kB)

1. TXT document (33 kB)

Contibutors: Popović, Vladimir (author) / Vasić, Branko (author) / Petrović, Miloš (author)

Numbering: 2010, volume 56, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (224 kB)

Application of Taguchi method for surface roughness and roundness error in drilling of AISI 316 s...

Contibutors: Çiçek, Adem (author) / Kivak, Turgay (author) / Samtaş, Gürcan (author)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (776 kB)

Evaluation of fluid flow over stepped spillways using the finite volume method as a novel approach

Contibutors: Vosoughifar, Hamid Reza (author) / Dolatshah, Azam (author) / Sadat Shokouhi, Seyed Kazem (author) / Hashemi Nezhad, Seyed Reza (author)

1. PDF document (2865 kB)

Numbering: 2013, volume 59, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Integrated design for fatigue life estimation of structures

Contibutors: Akrache, Radouane (author) / Lu, Jian (author)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (919 kB)

Reducing the computational time of the SPH method with a coupled 2-D/3-D approach

Contibutors: Džebo, Elvira (author) / Žagar, Dušan (author) / Četina, Matjaž (author) / Petkovšek, Gregor (author)

1. PDF document (7763 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Grounding characteristics of a non-pneumatic mechanical elastic tire in a rolling state with a ca...

Contibutors: Du, Xianbin (author) / Zhao, Youqun (author) / Wang, Qiang (author) / Fu, Hongxun (author) / Lin, Fen (author)

1. PDF document (3028 kB)

Numbering: 2019, volume 65, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

FE-modeling of cold rolling by in-feed method of circular grooves

Contibutors: Niţu, Eduard (author) / Iordache, Monica (author) / Marincei, Luminiţa (author) / Charpentier, Isabelle (author) / Le Coz, Gaël (author) / Ferron, Gérard (author) / Ungureanu, Ion (author)

1. PDF document (1538 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

3D numerical analysis of 2D profile bending with the torque superposed spatial bending method

Contibutors: Hudovernik, Matej (author) / Staupendahl, Daniel (author) / Gharbi, Mohammad (author) / Hermes, Matthias (author) / Tekkaya, A. Erman (author) / Kuzman, Karl (author) / Slabe, Janez Marko (author)

1. PDF document (3575 kB)

Numbering: 2013, volume 59, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analysis of building electric energy consumption data using an improved cooling degree day method

Contibutors: Krese, Gorazd (author) / Prek, Matjaž (author) / Butala, Vincenc (author)

1. PDF document (1478 kB)

Numbering: 2012, volume 58, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A new method for machinery fault diagnoses based on an optimal multiscale morphological filter

Contibutors: Tan, Wei (author) / Chen, Xiaoan (author) / Dong, Shaojiang (author)

1. PDF document (2025 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

A method to determine the impact of geometrical deviations on product performance

Contibutors: Vignat, Frédéric (author) / Nguyen, Dinh Son (author) / Brissaud, Daniel (author)

1. PDF document (1380 kB)

Numbering: 2012, volume 58, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Structural analysis of an articulated urban bus chassis via FEM

Contibutors: Croccolo, Dario (author) / De Agostinis, Massimiliano (author) / Vincenzi, Nicolo (author)

1. PDF document (3333 kB)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Nondestructive determination of stresses in steel components by eddy current method

Contibutors: Uchanin, Valentin (author) / Minakov, Sergej (author) / Nardoni, Giuseppe (author) / Ostash, Orest (author) / Fomichov, Sergej (author)

Numbering: 2018, volume 64, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (768 kB)

Modeling and simulation of a chip load acting on a single milling tool insert

Contibutors: Gyliene, Virginija (author) / Ostaševičius, Vytautas (author)

1. PDF document (1722 kB)

Numbering: 2012, volume 58, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Application of numerical simulations in the deep-drawing process and the holding system with segm...

Contibutors: Volk, Mihael (author) / Nardin, Blaž (author) / Dolšak, Bojan (author)

1. PDF document (2613 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (18 kB)

A dynamic rescheduling model with multi-agent system and its solution method

Contibutors: Zhao, Fuqing (author) / Wang, Jizhe (author) / Wang, Junbiao (author) / Jonrinaldi, Jonrinaldi (author)

1. PDF document (2300 kB)

Numbering: 2012, volume 58, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Global criterion method based on principal components to the optimization of manufacturing proces...

Contibutors: Freitas Gomes, José Henrique de (author) / Salgado Júnior, Aluizio Ramos (author) / Paiva, Anderson Paulo de (author) / Ferreira, Joao Roberto (author) / Costa, Sebastiao Carlos da (author) / Balestrassi, Pedro Paulo (author)

Numbering: 2012, volume 58, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (977 kB)

An improved torque method for preload control in precision assembly of miniature bolt joints

Contibutors: Zhang, Xiwen (author) / Wang, Xiaodong (author) / Luo, Yi (author)

1. PDF document (1969 kB)

Numbering: 2012, volume 58, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The optimization of machining parameters using the Taguchi method for surface roughness of AISI 8...

Contibutors: Motorcu, Ali Riza (author)

Probabilistic thermal and electromagnetic analyses of subsea solenoid valves for subsea blowout p...

Numbering: 2010, volume 56, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (233 kB)

1. TXT document (36 kB)

Contibutors: Cai, Baoping (author) / Liu, Yonghong (author) / Ren, Congkun (author) / Abulimiti, Aibaibu (author) / Tian, Xiaojie (author) / Zhang, Yanzhen (author)

1. PDF document (1862 kB)

Numbering: 2012, volume 58, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

A method for optimal blank shape determination in sheet metal forming based on numerical simulations

Contibutors: Mole, Nikolaj (author) / Cafuta, Gašper (author) / Štok, Boris (author)

1. PDF document (3846 kB)

Numbering: 2013, volume 59, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Mechanical and surface properties of lignocellulosic fibres reinforced composites

Contibutors: Stanciu, Mariana Domnica (author) / Savin, Adriana (author) / Nastac, Silviu Marian (author)

1. PDF document (1569 kB)

Numbering: 2018, volume 64, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Calculation of the combined torsional mesh stiffness of spur gears with two- and three-dimensiona...

Contibutors: Kiekbusch, Tomo (author) / Sappok, Daniel (author) / Sauer, Bernd (author) / Howard, Ian (author)

1. PDF document (1745 kB)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analysis of traditional preparation methods of buckwheat noodles in Japan

Contibutors: Asami, Yuya (author)

Source: Fagopyrum (Ljubljana)

Numbering: 2018, volume 35, issue 1

Provider: Slovenska akademija znanosti in umetnosti (SAZU)
(Obvezni izvod spletne publikacije)

1. PDF document (304 kB)

1. TXT document (19 kB)

Synthesis of chromium-nickel nanoparticles prepared by a microemulsion method and mechanical milling

Contibutors: Ban, Irena (author) / Stergar, Janja (author) / Drofenik, Mihael (author) / Ferk, Gregor (author) / Makovec, Darko (author)

Source: Acta chimica slovenica

Numbering: 2013, volume 60, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (244 kB)

1. TXT document (20 kB)

Introduction to the Computer Simulations

Contibutors: Novak, Nejc (author) / Borovinšek, Matej (author) / Vesenjak, Matej (author) / Ren, Zoran (author) / Glodež, Srečko (critic writer) / Ulbin, Miran (critic writer)

Source: knjige

Provider: Narodna in univerzitetna knjižnica
(Obvezni izvod spletne publikacije)

1. PDF document (7483 kB)

1. TXT document (136 kB)

JPEG file (231 kB)

Thermal mechanical coupling analysis of a flexible spoke non-pneumatic tire

Contibutors: Fu, Hongxun (author) / Liang, Xuemeng (author) / Wang, Yan (author) / Ku, Laiyun (author) / Xiao, Zhen (author)

1. PDF document (3625 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)