Digitalna knjižnica Slovenije

Fatigue properties of sintered DIN SINT-D30 powder metal before and after heat treatment

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

1. TXT document (15 kB)

Contibutors: Šori, Marko (author) / Šuštaršič, Borivoj (author) / Glodež, Srečko (author)

Fatigue problems of transmission belts:

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

1. TXT document (17 kB)

Contibutors: Emri, Igor (author) / Kramar, Janez (author) / Nikonov, Anatolij (author) / Florjančič, Urška (author) / Hribar, Anton (author)

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (512 kB)

The effect of back muscle fatigue on postural sway

Contibutors: Weber, Daša (author) / Strojnik, Vojko (author) / Rugelj, Darja (author)

Stanje splošne oslabelosti pri bolnikih z rakom

Numbering: 2013, volume 19, issue 2

Provider: Univerza v Ljubljani, Fakulteta za šport
(Obvezni izvod spletne publikacije)

1. PDF document (229 kB)

1. TXT document (33 kB)

Contibutors: Čufer, Tanja (author)

Source: Onkološki vikend

Numbering: 2005,

Provider: Onkološki inštitut Ljubljana

1. PDF document (478 kB)

Quantitative analysis of fatigue fracture surface in the duplex steel

Contibutors: Sozańska, Maria (author) / Iacoviello, Francesco (author) / Cwajna, Jan (author) / Jerome, Michel (author) / Sojka, Jaroslav (author) / Galland, Jacques (author)

Source: Image analysis and stereology

Numbering: 2002, volume 21, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (430 kB)

1. TXT document (16 kB)

Effect of stop-hole-induced material removal on the fatigue properties of cracked DT4C steel

Contibutors: Zhang, Chunguo (author) / Liu, Rongwei (author) / Liu, Qiankun (author) / Ren, Cuiping (author)

1. PDF document (2330 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Fatigue behaviour of a cast nickel-based superalloy Inconel 792-5A at 700 degree C

Contibutors: Petrenec, Martin (author) / Obrtlík, Karel (author) / Polák, Jaroslav (author) / Kruml, Tomáš (author)

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (333 kB)

Correlations between fatigue and variations in material constants of PLZT ceramics

Contibutors: Levstik, Adrijan (author) / Bobnar, Vid (author) / Kutnjak, Zdravko (author) / Kosec, Marija (author)

A modified method of von Mises stress-based MWCM for fatigue-life prediction under fully-reversed...

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (77 kB)

1. TXT document (12 kB)

Contibutors: Liu, Bowen (author) / Yan, Xiangqiao (author)

1. PDF document (1708 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Trends in fatigue-crack growth for the 2024 Al-alloy after a single tensile overload

Contibutors: Zhang, Chunguo (author) / Lei, Beibei (author) / Liu, Rongwei (author) / Huo, Fengfeng (author)

1. PDF document (3222 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Preskušanje materialov na odpornost proti utrujanju pri kotaljenju

Contibutors: Kalin, Mitjan (author) / Vižintin, Jože (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (59 kB)

Characterisation of the mechanical and corrosive properties of newly developed glass-steel compos...

Contibutors: Lyubimova, Olga (author) / Gridasova, Ekaterina (author) / Gridasov, Alexander (author) / Frieling, Gerrit (author) / Klein, Martin (author) / Walther, Frank (author)

1. PDF document (1543 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A fatigue characterization of honeycomb sandwich panels with a defect

Contibutors: Keskes, Boualem (author) / Menger, Yves (author) / Abbadi, Ahmed (author) / Gilgert, Joseph (author) / Bouaouadja, Nourredine (author) / Azari, Zitouni (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (491 kB)

Peripheral fatigue after maximal concentric and stretch shortening cycle exercises

Contibutors: Strojnik, Vojko (author) / Jereb, Blaž (author)

Numbering: 2014, volume 20, issue 2

Provider: Univerza v Ljubljani, Fakulteta za šport
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

The behavior of fatigue-crack growth in shipbuilding steel using the ESACRACK approach

Contibutors: Shehu, Mira (author) / Huebner, Peter (author) / Cukalla, Mimoza (author)

Thermal fatigue of single-crystal superalloys

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (286 kB)

1. TXT document (13 kB)

Contibutors: Getsov, Leonid (author) / Semenov, Artem (author) / Semenov, Sergey (author) / Rybnikov, Alexandr (author) / Tikhomirova, Elena A. (author)

1. PDF document (1206 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Fatigue behaviour of X70 steel in crude oil

Contibutors: Gajdoš, L'ubomír (author) / Šperl, Martin (author) / Bystrianský, Jaroslav (author)

Probability function of fatigue crack growth in case of material overloading

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (317 kB)

1. TXT document (16 kB)

Contibutors: Gubeljak, Nenad (author) / Legat, Janko (author)

The fracture and fatigue of surface-treated tetragonal zirconia (Y-TZP) dental ceramics

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (73 kB)

1. TXT document (9 kB)

Contibutors: Kosmač, Tomaž (scribe) / Oblak, Čedomir (author) / Jevnikar, Peter (author)

1. PDF document (1043 kB)

Numbering: 2007, volume 41, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The effect of the welding parameters and the coupling agent on the welding of composites

Contibutors: Erdogan, Ertugrul Selcuk (author) / Huner, Umit (author)

Modelling surface degradation in hot rolling work rolls

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

1. TXT document (37 kB)

Contibutors: Terčelj, Milan (author) / Fazarinc, Matevž (author) / Mrvar, Primož (author) / Žužek, Borut (author) / Fajfar, Peter (author)

Source: RMZ-materials and geoenvironment

Numbering: 2014, volume 61, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (3045 kB)

1. TXT document (17 kB)

Effect of heat treatment on the microstructure and mechanical properties of martensitic stainless...

Contibutors: Calik, Adnan (author) / Karakaş, Mustafa Serdar (author)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (688 kB)

Computer simulation of fatigue, creep and thermal-fatigue cracks propagation in gas-turbine blades

Contibutors: Semenov, Artem (author) / Semenov, Sergey (author) / Nazarenko, Anatoly (author) / Getsov, Leonid (author)

Fatigue properties of a high-strength-steel welded joint

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (397 kB)

1. TXT document (26 kB)

Contibutors: Burzić, Zijah (author) / Grabulov, Vencislav (author) / Sedmak, Stojan (author) / Sedmak, Aleksander (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

Nastanek in rast utrujenostne razpoke v korozijskem mediju

Contibutors: Kosec, Ladislav (author) / Kosel, Franc (author)

Source: Železarski zbornik

Numbering: 1987, volume 21, issue 4

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1567 kB)

The effect of thermo-mechanical processing on the structure, static mechanical properties and fat...

Contibutors: Kubásek, Jiří (author) / Vojtěch, Dalibor (author) / Dvorský, Drahomír (author)

1. PDF document (3551 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

BOHICA

Contibutors: Elving, Wim (author) / Hansma, Lindy D. (author) / De Boer, Merel G. (author)

Source: Teorija in praksa

Numbering: 2011, volume 48, issue 6

Provider: Univerza v Ljubljani, Fakulteta za družbene vede

1. PDF document (586 kB)

1. TXT document (47 kB)

Fatigue-strength analysis in the very-high-cycle regime of the TC17 titanium alloy with micro scr...

Contibutors: Ding, Mingchao (author) / Zhang, Yuanliang (author) / Wang, Jinlong (author) / Lu, Huitian (author) / Xian, Hongwei (author) / Hu, Ning (author) / Li, Zexin (author)

1. PDF document (3935 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Using the Barkhausen-noise analysis and metal-magnetic-memory method for material characteristics...

Contibutors: Kolařík, Kamil (author) / Šimeček, Jiří (author) / Kříž, Antonín (author) / Čapek, Jiří (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (999 kB)

Določevanje parametrov utrujanja jekla z veliko trdnostjo S1100Q

Contibutors: Knez, Marko (author) / Kramberger, Janez (author) / Glodež, Srečko (author)

An experimental verification of numerical models for the fracture and fatigue of welded structures

Numbering: 2007, volume 53, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (522 kB)

1. TXT document (34 kB)

Contibutors: Sedmak, Stojan (author) / Sedmak, Aleksander (author) / Arsić, Miodrag (author) / Vojvodič-Tuma, Jelena (author)

Fatigue properties of low carbon steel strengthened by static or dynamic work hardening

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (361 kB)

1. TXT document (24 kB)

Contibutors: Michel, Ján (author) / Hidvéghy, J. (author) / Mamuzić, Ilija (author) / Bursák, M. (author)

Fatigue-life enhancement of sheets made of 34CrNiMo6 steel

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (187 kB)

1. TXT document (16 kB)

Contibutors: Džugan, Jan (author) / Nový, Zbyšek (author) / Marešová, Martina (author)

Analyzing the heat-treatment effect on the mechanical properties of free-cutting steels

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

1. TXT document (15 kB)

Contibutors: Kulekci, Mustafa Kemal (author) / Esme, Ugur (author) / Kahraman, Funda (author) / Ozgun, Rahim (author) / Akkurt, Adnan (author)

1. PDF document (1126 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Fatigue-crack propagation near a threshold region in the framework of two-parameter fracture mech...

Contibutors: Seitl, Stanislav (author) / Hutař, Pavel (author)

Dinamična trdnost materiala na prehodu temena vara pri zvarnem spoju na visokotrdnem konstrukcijs...

Numbering: 2007, volume 41, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (203 kB)

1. TXT document (17 kB)

Contibutors: Gliha, Vladimir (author)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (201 kB)

Influence of delta-ferrite on the fatigue resistance of blade materials

Contibutors: Hájková, Pavlína (author) / Janovec, Jiří (author) / Siegl, Jan (author) / Smola, Bohumil (author) / Vyroubalová, Michaela (author) / Tůmová, Daniela (author)

Numbering: 2010, volume 44, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (393 kB)

Establishment of a multi-particle erosion model based on the low-cycle fatigue law

Contibutors: Li, Mingfei (author) / Dou, Yihua (author) / Li, Hong (author) / Cheng, Jiarui (author) / Wei, Wenlan (author)

The fatigue behaviour of aluminium foam

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (687 kB)

1. TXT document (29 kB)

Contibutors: Nosko, Martin (author) / Simančík, František (author) / Florek, Roman (author)

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (581 kB)

Characteristics of the thermal fatigue resistance for 3.1C, 0.8Si, 0.9Mn, 1.7Cr, 4.5Ni and 0.3Mo ...

Contibutors: Terčelj, Milan (author) / Fajfar, Peter (author) / Godec, Matjaž (author) / Kugler, Goran (author)

1. PDF document (1648 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Obravnava simptoma utrujenosti v paliativni zdravstveni negi

Contibutors: Mlakar, Denis (author)

Source: Onkološki vikend

Numbering: 2005,

Provider: Onkološki inštitut Ljubljana

1. PDF document (257 kB)

1. TXT document (12 kB)

Numerično simuliranje površinske utrujenostne razpoke na zobeh zobnikov

Contibutors: Fajdiga, Gorazd (author) / Flašker, Jože (author) / Glodež, Srečko (author) / Ren, Zoran (author)

Thermal fatigue of a Ni-based superalloy single crystal

Numbering: 2000, volume 46, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (265 kB)

1. TXT document (34 kB)

Contibutors: Getsov, Leonid (author) / Dobina, Natalia (author) / Rybnikov, Alexandr (author)

Numbering: 2007, volume 41, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (927 kB)

Testing of thermal fatigue resistance of tools and rolls for hot working

Contibutors: Terčelj, Milan (author) / Fazarinc, Matevž (author) / Kugler, Goran (author)

Source: RMZ-materials and geoenvironment

Numbering: 2017, volume 64, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (838 kB)

The acute effect of self-massage on the short-term recovery of muscle contractile function

Contibutors: Zorko, Nejc (author) / Škarabot, Jakob (author) / García Ramos, Amador (author) / Štirn, Igor (author)

Numbering: 2016, volume 22, issue 3

Provider: Univerza v Ljubljani, Fakulteta za šport
(Obvezni izvod spletne publikacije)

1. PDF document (156 kB)

Fatigue-life behaviour and a lifetime assessment of a double-leaf spring using FEM-based software

Contibutors: Borković, Predrag (author) / Šuštaršič, Borivoj (author) / Malešević, Milan (author) / Žužek, Borut (author) / Podgornik, Bojan (author) / Leskovšek, Vojteh (author)

Vpliv umetnih površinskih napak na dinamično trdnost materiala na prehodu temena vara

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (706 kB)

1. TXT document (20 kB)

Contibutors: Gliha, Vladimir (author)

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (194 kB)

Določevanje hitrosti širjenja utrujenostne razpoke v zvarnem spoju pri majhnih prirastkih

Contibutors: Predan, Jožef (author) / Gubeljak, Nenad (author) / Oblak, Maks (author) / Legat, Janko (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (187 kB)

Multiple sprints performance and fatigue level between turkish national senior free and greco-rom...

Contibutors: Ziyagil, M. Akif (author) / Türkmen, Mehmet (author)

Vedenje WP-preizkušanca pri utrujanju

Numbering: 2017, volume 23, issue 2

Provider: Univerza v Ljubljani, Fakulteta za šport
(Obvezni izvod spletne publikacije)

1. PDF document (180 kB)

1. TXT document (31 kB)

Contibutors: Gliha, Vladimir (author) / Rojko, Danilo (author)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (222 kB)

Enhanced fatigue analysis - incorporating downstream manufacturing processes

Contibutors: Eichlseder, Wilfried (author)

Numbering: 2010, volume 44, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (496 kB)

Utrujenost pri osebah, ki so prebolele otroško paralizo

Contibutors: Puzić Ravnjak, Nataša (author) / Burger, Helena (author)

Source: Rehabilitacija (Ljubljana)

Numbering: 2008, issue 2

Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)

1. PDF document (277 kB)

Fatigue properties of high-strength Al-Zn-Mg-Cu alloys with different levels of purity

Contibutors: Vratnica, Maja (author) / Čurović, Jelisav (author) / Burzić, Zijah (author)

Numerična in eksperimentalna analiza utrujanja v lomnomehanskem preskušancu nestandardne oblike

Numbering: 2002, volume 36, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (278 kB)

1. TXT document (11 kB)

Contibutors: Kovše, Igor (author)

The effect of pentagonal and octagonal joint design on the fatigue strength of polymer-matrix com...

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

1. TXT document (18 kB)

Contibutors: Ersan, Cigdem (author) / Canyurt, Olcay Ersel (author)

1. PDF document (1534 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Automated diagnostics of damage to an aluminum alloy under the conditions of high-cycle fatigue

Contibutors: Maruščak, P. O. (author) / Konovalenko, Igor (author) / Karuskevich, Mykhailo (author) / Gliha, Vladimir (author) / Vuherer, Tomaž (author)

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (416 kB)

Microstructure and fatigue-crack growth of quenched and tempered 23CrNiMoV steel

Contibutors: Zhu, Shuaishuai (author) / Zhang, Baosen (author) / Mao, Xiangyang (author) / Ba, Zhixin (author) / Dai, Yuming (author) / Wang, Zhangzhong (author)

1. PDF document (4744 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Automated fractal analysis of a network of thermal fatigue cracks

Contibutors: Maruščak, P. O. (author)

Accurate modeling and identification of servo-hydraulic cylinder systems in multi-axial test appl...

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (273 kB)

1. TXT document (12 kB)

Contibutors: Li, Lingjun (author) / Thurner, Thomas (author)

Source: Ventil (Ljubljana)

Numbering: 2013, volume 19, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1667 kB)

Razvoj servohidravličnega pogona na področju mehanike loma

Contibutors: Tič, Vito (author) / Lovrec, Darko (author) / Milković, Marijana (author) / Gubeljak, Nenad (author)

Source: Ventil (Ljubljana)

Numbering: 2019, volume 25, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (791 kB)

Nevrofizioterapija bolnikov z multiplo sklerozo

Contibutors: Dobnik, Tanja (author)

Source: Rehabilitacija (Ljubljana)

Numbering: 2013, volume 12, issue 3

Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)

1. PDF document (157 kB)

1. TXT document (28 kB)

Videoconferencing and sleep quality in Slovenian university students

Contibutors: Vuk, Vita (author) / Horvat, Marina (author) / Vrečko Pizzulin, Vesna (author) / Štukovnik, Vita (author)

Source: CEPS journal

Numbering: 2024, volume 42

Provider: Univerza v Ljubljani, Pedagoška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (664 kB)

1. TXT document (74 kB)

An improved strain-energy density model considering the effect of mean stress

Contibutors: Li, Jing (author) / Qiu, Yuan-ying (author) / Tong, Xiao-long (author) / Gao, Lei (author)

Sanacija sidranja krajnih opornikov železniškega nadvoza na Dunajski cesti v Ljubljani

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (855 kB)

1. TXT document (30 kB)

Contibutors: Hladnik, Leon (author)

Source: Gradbeni vestnik

Numbering: 2021, letn. 70

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (1964 kB)

Napoved preostale življenjske dobe jeklenega želežniškega mostu na utrujanje na podlagi izmerjene...

Contibutors: Kosič, Mirko (author) / Hekič, Doron (author) / Anžlin, Andrej (author)

Source: Gradbeni vestnik

Numbering: 2023, letn. 72

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (4791 kB)

1. TXT document (52 kB)

How to experimentally monitor the fatigue behaviour of vibrating mechanical systems?

Contibutors: Cianetti, Filippo (author)

1. PDF document (1029 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Study on the correction of S-N distribution in the welding fatigue analysis method based on the b...

Contibutors: Sun, Yibo (author) / Yang, Xinhua (author)

1. PDF document (2023 kB)

Numbering: 2014, volume 60, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Fatigue life estimation of notched structural components

Contibutors: Stamenković, Dragi (author) / Maksimović, Katarina (author) / Nikolić-Stanojević, Vera (author) / Maksimović, Stevan (author) / Stupar, Slobodan (author) / Vasović, Ivana (author)

1. PDF document (1560 kB)

Numbering: 2010, volume 56, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Theoretical and experimental study of fatigue strength of plain woven glass/epoxy composite

Contibutors: Movaghghar, Ali (author) / Lvov, Gennady Ivanovich (author)

1. PDF document (1079 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Railway axle analyses

Contibutors: Dikmen, Ferhat (author) / Bayraktar, Meral (author) / Guclu, Rahmi (author)

1. PDF document (1724 kB)

Numbering: 2012, volume 58, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analysis on damage to rolling bearings at small turning angles

Contibutors: Okorn, Ivan (author) / Nagode, Marko (author) / Klemenc, Jernej (author)

1. PDF document (4166 kB)

Numbering: 2018, volume 64, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Fatigue failure study of the lower suspension vehicle arm using a multiaxial criterion of the str...

Contibutors: Saoudi, Abdelhamid (author) / Bouazara, Mohamed (author) / Marceau, Daniel (author)

Numerical methods for TMF cycle modeling

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (765 kB)

1. TXT document (33 kB)

Contibutors: Zaletelj, Henrik (author) / Fajdiga, Gorazd (author) / Nagode, Marko (author)

1. PDF document (1523 kB)

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Harmonic equivalence of the impulse loads in vibration fatigue

Contibutors: Ogrinec, Primož (author) / Slavič, Janko (author) / Boltežar, Miha (author)

Fatigue life analysis of aluminum wheels by simulation of rotary fatigue test

Numbering: 2019, volume 65, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (479 kB)

1. TXT document (38 kB)

Contibutors: Wang, Liangmo (author) / Chen, Yufa (author) / Wang, Chenzhi (author) / Wang, Qingzheng (author)

1. PDF document (1936 kB)

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Vibrational fatigue and structural dynamics for harmonic and random loads

Contibutors: Česnik, Martin (author) / Slavič, Janko (author)

1. PDF document (2423 kB)

Numbering: 2014, volume 60, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Integrated design for fatigue life estimation of structures

Contibutors: Akrache, Radouane (author) / Lu, Jian (author)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (919 kB)

Elastocaloric cooling

Contibutors: Kabirifar, Parham (author) / Žerovnik, Andrej (author) / Ahčin, Žiga (author) / Porenta, Luka (author) / Brojan, Miha (author) / Tušek, Jaka (author)

1. PDF document (2082 kB)

Numbering: 2019, volume 65, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (73 kB)

Studying the fatigue life of a non-pneumatic wheel by using finite-life design for life prediction

Contibutors: Xiao, Zhen (author) / Zhao, You Qun (author) / Lin, Fen (author) / Zhu, Ming Min (author) / Deng, Yao Ji (author)

1. PDF document (2789 kB)

Numbering: 2018, volume 64, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

On the fatigue of steel catenary risers

Contibutors: Chibueze, Nnamdi Onochie (author) / Ossia, Chinwuba Victor (author) / Okoli, John Umunna (author)

Numbering: 2016, volume 62, nr. 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (796 kB)

Influence of quasi-steady wind loads on the fatigue damage of wind turbine gearboxes

Contibutors: Xiang, Dong (author) / Li, Jiang (author) / You, Mengxing (author) / Shen, Yinhua (author)

1. PDF document (5012 kB)

Numbering: 2017, volume 63, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

High-cycle fatigue behavior of austenitic steel and pure copper under uniaxial, proportional and ...

Contibutors: Pejkowski, Łukasz (author) / Skibicki, Dariusz (author) / Sempruch, Janusz (author)

1. PDF document (8114 kB)

Numbering: 2014, volume 60, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Fatigue of Cellular Structures - a Review

Contibutors: Nečemer, Branko (author) / Vesenjak, Matej (author) / Glodež, Srečko (author)

1. PDF document (3235 kB)

Numbering: 2019, volume 65, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Fatigue design of ferritic-pearlitic nodular cast iron components with surface discontinuities

Contibutors: Gróza, Márton (author) / Váradi, Károly (author)

Numbering: 2018, volume 64, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. 16112667 (1772 kB)

Investigating fatigue life effects on the vibration properties in friction stir spot welding usin...

Contibutors: Aghdam, Nima Jafarzadeh (author) / Hassanifard, Soran (author) / Ettefagh, Mir Mohammad (author) / Nanvayesavojblaghi, Arvin (author)

1. PDF document (3407 kB)

Numbering: 2014, volume 60, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Experimental and numerical investigations of the jaw crusher supporting structure fatigue failure

Contibutors: Rusiński, Eugeniusz (author) / Moczko, Przemysław (author) / Pietrusiak, Damian (author) / Przybyłek, Grzegorz (author)

1. PDF document (6168 kB)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Evaluating the statistical significance of a fatigue-life reduction due to macro-porosity

Contibutors: Bižal, Ana (author) / Klemenc, Jernej (author) / Fajdiga, Matija (author)

1. PDF document (1707 kB)

Numbering: 2014, volume 60, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

Studying the effect of thermal fatigue on multiple cracks propagating in an SS316L thin flange on...

Contibutors: Mukhta, Fariha (author) / Qayyum, Faisal (author) / Elahi, Hassan (author) / Shah, Masood (author)

1. PDF document (3184 kB)

Numbering: 2019, volume 65, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Assessment of the fatigue parameters from random vibration testing

Contibutors: Česnik, Martin (author) / Slavič, Janko (author) / Boltežar, Miha (author)

1. PDF document (1272 kB)

Numbering: 2016, volume 62, nr. 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

A computational model for bending fatigue analyses of sintered gears

Contibutors: Glodež, Srečko (author) / Šori, Marko (author) / Verlak, Tomaž (author)

1. PDF document (1413 kB)

Numbering: 2014, volume 60, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Determination of fatigue crack growth trajectory and residual life under mixed modes

Contibutors: Blažić, Marija (author) / Maksimović, Stevan (author) / Petrović, Zlatko (author) / Vasović, Ivana (author) / Turnić, Dragana (author)

1. PDF document (1321 kB)

Numbering: 2014, volume 60, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Numerical modelling of crack growth in a gear tooth root

Contibutors: Podrug, Srđan (author) / Glodež, Srečko (author) / Jelaska, Damir (author)

1. PDF document (1382 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Fatigue life analysis of crane K-type welded joints based on non-linear cumulative damage theory

Contibutors: Cai, Fuhai (author) / Wang, Xin (author) / Liu, Jiquan (author) / Fuling, Zhao (author)

1. PDF document (3371 kB)

Numbering: 2014, volume 60, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Comparison of mechanical properties of recent and 400-year-old European larch wood

Contibutors: Lipovec Zupanc, Enej (author) / Fajdiga, Gorazd (author) / Humar, Miha (author)

Source: Les (Ljubljana)

Numbering: 2021, volume 70, issue 2

Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (6975 kB)

1. TXT document (1 kB)

Effect of the rivet-hole tolerance on the stress-severity factor

Contibutors: Běhal, Jiří (author) / Růžek, Roman (author)