Digitalna knjižnica Slovenije

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Identification of the material parameters of a unidirectional fiber composite using a micromodel

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

Določevanje Hugginsovega interakcijskega parametra pri nabrekanju elastomerov s pomočjo teorije g... (1995, volume 29, issue 1/2)

Contibutors: Šuštar, Marija (author) / Šušterič, Zoran (author) / Čadež, Lidija (author) / Kezele, Marija (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (448 kB)

Influence of the process parameters on high-velocity oxygen-fuel-sprayed 75Cr3C2-25NiCr coatings

Contibutors: Nagulan, BalaGanesh (author) / Thamilkolundu, SenthilKumar (author) / Murugesan, Chandrasekar (author)

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Use of a Perth sand penetrometer (PSP) device to determine the engineering parameters of sands

Contibutors: Mohammadi, S. D. (author)

Source: Acta geotechnica Slovenica

Numbering: 2016, volume 13, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (581 kB)

A simplified method to analyze pile-supported and geosynthetic-reinforced embankments and the inf...

Contibutors: Feicheng, Liu (author)

Source: Acta geotechnica Slovenica

Numbering: 2018, volume 15, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1339 kB)

1. TXT document (81 kB)

Computer tools to determine physical parameters in wooden houses

Contibutors: Bečkovský, David (author) / Vajkay, František (author) / Tichomirov, Vladimír (author)

Dimensional errors in selective laser melting products related to different orientations and proc...

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (604 kB)

1. TXT document (17 kB)

Contibutors: Pal, Snehashis (author) / Kokol, Vanja (author) / Gubeljak, Nenad (author) / Hadžistević, Miodrag (author) / Hudak, Radovan (author) / Drstvenšek, Igor (author)

1. PDF document (1144 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Določitev parametrov enofaznega transfrmatorja s pomočjo diferenčne evolucije

Contibutors: Slokan, Ervin (author) / Štumberger, Gorazd (author)

Source: Elektrotehniški vestnik

Numbering: 2016, volume 83, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (446 kB)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Legirani praški za navarjanje z večžično elektrodo (1997, volume 31, issue 5)

Contibutors: Kejžar, Rajko (author) / Kejžar, Božena (author)

Micromechanical model of the substituents of a unidirectional fiber-reinforced composite and its ...

Provider: Narodna in univerzitetna knjižnica

1. PDF document (507 kB)

1. TXT document (12 kB)

Contibutors: Kroupa, Tomáš (author) / Srbová, Hana (author) / Zemčík, Robert (author)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (751 kB)

Optimiranje značilnih parametrov frezanja z uporabo razvojne tehnike optimizacije jate delcev

Contibutors: Župerl, Uroš (author) / Čuš, Franc (author) / Gečevska, Valentina (author)

Prispevek k parameterski identifikaciji dinamičnih sistemov z eno prostorsko stopnjo

Numbering: 2007, volume 53, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (670 kB)

1. TXT document (51 kB)

Contibutors: Jakšić, Nikola (author) / Boltežar, Miha (author)

Genetic and environmental dispersion parameter estimation by test interval method in dairy sheep

Numbering: 2002, volume 48, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (342 kB)

1. TXT document (56 kB)

Contibutors: Komprej, Andreja (author) / Kompan, Drago (author) / Kovač, Milena (author)

Source: Acta agriculturae Slovenica

Numbering: 2011, volume 98, issue 1

Provider: Univerza v Ljubljani, Biotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (444 kB)

1. TXT document (40 kB)

Effects of technological parameters on the morphological, microstructural and mechanical behavior...

Contibutors: Li, Wen (author) / Sheng, Lei (author) / Xia, Yuanhao (author) / Amirfazli, Alidad (author) / Lu, Yalin (author)

1. PDF document (3340 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Contibutors: Akkuş, Harun (author)

From experimental data to pole parameters in a model independent way (angle dependent continuum a...

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

1. TXT document (22 kB)

Contibutors: Švarc, Alfred (author)

Source: Blejske delavnice iz fizike

Numbering: 2017, volume 18, issue 1

Provider: Društvo matematikov, fizikov in astronomov

1. PDF document (650 kB)

1. TXT document (20 kB)

Tensile properties of cold-drawn low-carbon steel wires under different process parameters

Contibutors: Çetinarslan, Cem S. (author) / Güzey, Ali (author)

Integrated statistical methodology for optimizing the machining parameters in SiC powder mixed - ...

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (760 kB)

1. TXT document (30 kB)

Contibutors: Modi, Manoj (author) / Agarwal, Gopal (author)

1. PDF document (1477 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Optimiranje energetskih in ekoloških parametrov termoelektrarn kurjenih s premogom

Contibutors: Janez Oman [Šif. raz.: 9218] (project leader)

Duration: 01.2007/12.2009

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (251 kB)

1. TXT document (45 kB)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

Sistem za spremljanje in optimiranje postopka frezanja z uporabo genetskih algoritmov

Contibutors: Milfelner, Matjaž (author) / Čuš, Franc (author)

Review of low actuation voltage RF MEMS electrostatic switches based on metallic and carbon alloys

Numbering: 2004, volume 50, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (993 kB)

1. TXT document (53 kB)

Contibutors: Mafinejad, Yasser (author) / Kouzani, Abbas (author) / Mafinezhad, Khalil (author)

Source: Informacije MIDEM

Numbering: 2013, volume 43, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1693 kB)

1. TXT document (52 kB)

A comparison of parameters below the limit of detection in geochemical analyses by substitution m...

Contibutors: Verbovšek, Timotej (author)

1. PDF document (1110 kB)

Numbering: 2011, volume 58, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Analysis of a dilatometer test in over-consolidated sediments, basin of the Duero river, Spain

Contibutors: Escolano Sánchez, Félix (author) / Bueno Aguado, Manuel (author)

Source: Acta geotechnica Slovenica

Numbering: 2015, volume 12, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (411 kB)

1. TXT document (34 kB)

Small-punch testing of a weld´s heat-affected zones

Contibutors: Šturm, Roman (author) / Li, Yingzhi (author)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (555 kB)

Weldability of metal matrix composite plates by friction stir welding at low welding parameters

Contibutors: Bozkurt, Yahya (author)

Numerične analize preoblikovanja cevi z visokim notranjim tlakom

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (551 kB)

1. TXT document (24 kB)

Contibutors: Pepelnjak, Tomaž (author)

Coordination of school science classroom furnishings with anthropometric parameters for 11-12 yea...

Numbering: 2004, volume 50, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (781 kB)

1. TXT document (47 kB)

Contibutors: Rizman Herga, Nataša (author) / Fošnarič, Samo (author)

Source: Revija za elementarno izobraževanje

Numbering: 2017, volume 10, issue 1

Provider: Univerza v Mariboru, Pedagoška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (747 kB)

Karakterizacija polprevodniških nanomaterialov za določanje njihovih optičnih in toplotnih parametrov z uporabo fototermičnega učinka

Contibutors: Korte, Dorota A. [31463] (project leader)

Duration: 2013 2011/12 07

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (423 kB)

1. TXT document (54 kB)

Small signal modeling of scaled double-gate MOSFET for GHz applications

Contibutors: Sood, Himangi (author) / Srivastava, Viranjay M. (author) / Singh, Ghanshyam (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1606 kB)

1. TXT document (35 kB)

Analiza in določanje lastnosti parametrov nadomestnega sistema vzvojnih nihanj, ki se pojavljajo ...

Contibutors: Filipovič, Ivan (author) / Doleček, Vlatko (author) / Bibić, Dževad (author)

Use of larson-miller parameter for modeling the progress of isothermal solidification during tran...

Numbering: 2005, volume 51, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (986 kB)

1. TXT document (44 kB)

Contibutors: Pouranvari, Majid (author) / Mousavizadeh, Seyed Mostafa (author)

Določevanje parametrov utrujanja jekla z veliko trdnostjo S1100Q

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (855 kB)

1. TXT document (18 kB)

Contibutors: Knez, Marko (author) / Kramberger, Janez (author) / Glodež, Srečko (author)

Vpliv parametrov pri kontinuirnem litju na mikrostrukturo zlitine Cu-Cr-Zr

Numbering: 2007, volume 53, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (522 kB)

1. TXT document (34 kB)

Contibutors: Križman, Alojz (author) / Anžel, Ivan (author) / Kosec, L. (author) / Spaić, S. (author)

The influence of process parameters on the mechanical properties of friction-stir-welded joints o...

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (507 kB)

1. TXT document (11 kB)

Contibutors: Milčić, Miodrag (author) / Vuherer, Tomaž (author) / Radisavljević, Igor (author) / Milčić, Dragan (author) / Kramberger, Janez (author)

1. PDF document (1258 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental study and analysis of the wear properties of friction-stir-welded AA7075-T6 and A384...

Contibutors: Anganan, Karuppannan (author) / Prabagaran, Subramaniam (author) / Muthukrishnan, Mayakrishnan (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (19 kB)

Effect of sintering parameters on the density, microstructure and mechanical properties of the ni...

Contibutors: Butković, Samir (author) / Oruč, Mirsada (author) / Šarić, Emir (author) / Mehmedović, Muhamed (author)

Predictive model and optimization of processing parameters for plastic injection moulding

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (216 kB)

1. TXT document (24 kB)

Contibutors: Kramar, Davorin (author) / Cica, Djordje (author)

Influence of cooling mode in relation to casting and extrusion parameters on mechanical propertie...

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

1. TXT document (32 kB)

Contibutors: Malej, Simon (author) / Terčelj, Milan (author) / Peruš, Iztok (author) / Kugler, Goran (author)

Artificial tooth and polymer-base bond in removable dentures: the influence of pre-treatment on t...

Numbering: 2017, volume 64, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (670 kB)

1. TXT document (27 kB)

Contibutors: Pavlin, Martin (author) / Rudolf, Rebeka (author) / Jerolimov, Vjekoslav (author)

FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...

Numbering: 2008, volume 55, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (451 kB)

1. TXT document (13 kB)

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)

1. PDF document (1870 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Meritev izkoristka in nastavitev krmilnih parametrov kaplanove turbine z dolgim cevnim sistemom s...

Contibutors: Trebše, Andrej J. (author)

Numbering: 2004, volume 50, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (299 kB)

Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...

Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (943 kB)

1. TXT document (47 kB)

Interval prediction of order statistics based on records by employing inter-record times

Contibutors: Amini, Morteza (author) / MirMostafaee, S. M. T. K. (author)

Source: Metodološki zvezki

Numbering: 2016, volume 13, issue 1

Provider: Univerza v Ljubljani, Fakulteta za družbene vede
(Obvezni izvod spletne publikacije)

1. PDF document (310 kB)

1. TXT document (29 kB)

Influence of parameters of the flanged open-ended coaxial probe measurement setup on permittivity...

Contibutors: Koselj, Jure (author) / Bregar, Vladimir Boštjan (author)

Source: Informacije MIDEM

Numbering: 2012, volume 42, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (245 kB)

Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the GRA-Ta...

Contibutors: Kolli, Murahari (author) / Adepu, Kumar (author)

The effect of moderate exercise on erythrocyte blood parameters in allogenic bone marrow transpla...

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (730 kB)

1. TXT document (48 kB)

Contibutors: Karakuş, Mustafa (author) / Koç, Hürmüz (author)

Source: Kinesiologia Slovenica

Numbering: 2018, volume 24, issue 2

Provider: Univerza v Ljubljani, Fakulteta za šport
(Obvezni izvod spletne publikacije)

1. PDF document (124 kB)

1. TXT document (30 kB)

Optimization of the drilling parameters for the cutting forces in B4C-reinforced Al-7XXX-series a...

Contibutors: Taşkesen, Ahmet (author) / Kütükde, Kenan (author)

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (596 kB)

Laser cladding in the use effects on nitrided and PVD coated steels used for die-casting using va...

Contibutors: Bombač, David (author) / Fazarinc, Matevž (author) / Pleterski, Matej (author) / Tušek, Janez (author) / Muhič, Tadej (author)

1. PDF document (1622 kB)

Numbering: 2009, volume 56, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Analiza vpliva procesnih parametrov na kontinuirano ulivanje zlitine Al4.5CuPbBi

Contibutors: Sabolič Mijovič, Mojca (author) / Šarler, Božidar (author)

Cold-cathode ionization gauge - preprocessing and modelling of the gauge parameters using neural ...

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (285 kB)

1. TXT document (19 kB)

Contibutors: Irmančnik-Belič, Lidija (author) / Belič, Igor (author) / Erjavec, Bojan (author) / Šetina, Janez (author)

MOSFET spice parameter extraction by modified genetic algorithm

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (145 kB)

1. TXT document (26 kB)

Contibutors: Başak, Muhammed Emin (author) / Özçelep, Yasin (author) / Kuntman, Ayten (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2283 kB)

Determination of the mechanical parameters of a bonded joint between a metal and a composite by c...

Contibutors: Bernardin, Petr (author) / Vacík, Josef (author) / Kroupa, Tomáš (author) / Kottner, Radek (author)

1. PDF document (1021 kB)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Increasing micro-purity and determining the effects of the production with and without vacuum ref...

Contibutors: Kurka, Vladislav (author) / Pindor, Jaroslav (author) / Kosňovská, Jana (author) / Adolf, Zdeněk (author)

1. PDF document (2651 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Study of process parameters on Al-7.0 % Si-0.45 % Mg alloy cast trough strain induced melt activa...

Contibutors: Sharma, Ashok (author) / Gupta, S. K. (author) / Srikanth, Madhulika (author)

1. PDF document (1016 kB)

Numbering: 2012, volume 59, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Modeliranje razslojene atmosfere v eksperimentalni napravi jedrske elektrarne s popisom z zgoščen...

Contibutors: Kljenak, Ivo (author) / Mavko, Borut (author) / Škerlavaj, Aljaž (author)

Analysis of process parameters for a surface-grinding process based on the Taguchi method

Numbering: 2006, volume 52, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (746 kB)

1. TXT document (61 kB)

Contibutors: Külekci, Mustafa Kemal (author)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

1. TXT document (19 kB)

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Optimization of process parameters for machining of Al 7075 thin-walled structures

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

1. TXT document (39 kB)

Contibutors: Borojević, S. (author) / Lukic, Dejan (author) / Milošević, Miloš (author) / Vukman, J. (author) / Kramar, Davorin (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1929 kB)

1. TXT document (38 kB)

Prediction of superconducting transition temperature using a machine-learning method

Contibutors: Liu, Yao (author) / Zhang, Huiran (author) / Xu, Yan (author) / Li, Shengzhou (author) / Dai, Dongbo (author) / Li, Chengfan (author) / Ding, Guangtai (author) / Shen, Wenfeng (author) / Qian, Quan (author)

Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (385 kB)

1. TXT document (26 kB)

Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)

1. PDF document (1860 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of welding variables on mechanical properties of low carbon steel welded joint

Contibutors: Talabi, S. I. (author) / Owolabi, O. B. (author) / Adebisi, J. A. (author) / Yahaya, T. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (685 kB)

1. TXT document (17 kB)

Artificial-neural-network prediction of hexagonal lattice parameters for non-stoichiometric apatites

Contibutors: Kockan, Umit (author) / Ozturk, Fahrettin (author) / Evis, Zafer (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

The influence of selected treatment parameters with atmospheric plasma on the treatment process a...

Contibutors: Žigon, Jure (author) / Todorović, Dejan (author) / Pavlič, Matjaž (author) / Petrič, Marko (author) / Dahle, Sebastian (author)

Source: Les (Ljubljana)

Numbering: 2020, volume 69, issue 1

Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (4415 kB)

1. TXT document (54 kB)

Kemizem wengenskih magmatskih kamenin na Slovenskem, prikazan s parametri Zavarickega

Contibutors: Faninger, Ernest (author)

Source: Geologija

Numbering: 1965, volume 8

Provider: Narodna in univerzitetna knjižnica

1. PDF document (7664 kB)

Učinek ortoze za gleženj in stopalo s sklepom z dvojno vzmetjo na vzorec in parametre hoje pri ot...

Contibutors: Groleger Sršen, Katja (author) / Osrečki, Ksenija (author) / Flander, Varja (author) / Cikajlo, Imre (author)

Source: Rehabilitacija (Ljubljana)

Numbering: 2019, volume 18, issue 1

Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)

1. PDF document (945 kB)

1. TXT document (44 kB)

Analiza poplav z uporabo satelitskih posnetkov - primer hudourniške poplave v Selški dolini leta ...

Contibutors: Lamovec, Peter (author) / Mikoš, Matjaž (author)

Source: Geodetski vestnik

Numbering: 2011, volume 55, issue 3

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (972 kB)

Nastavitev PID z algoritmom diferencialne evolucije v PLK na primeru regulacije pretoka zraka

Contibutors: Bratina, Božidar (author) / Muškinja, Nenad (author) / Rotovnik, Milan (author) / Golob, Marjan (author)

Source: Ventil (Ljubljana)

Numbering: 2025, volume 31, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (590 kB)

1. TXT document (27 kB)

Določanje koncentracijskih profilov in difuzijskih parametrov v tankoplastnih strukturah s profil...

Contibutors: Panjan, Matjaž (author) / Zalar, Anton (author) / Kovač, Janez (author) / Čekada, Miha (author) / Panjan, Peter (author)

Source: Vakuumist

Numbering: 2008, volume 28, issue 1/2

Provider: Društvo za vakuumsko tehniko Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (1086 kB)

Meritve kakovostnih parametrov za modeliranje prvega vala onesnaženih voda s cestnih površin

Contibutors: Krzyk, Mario (author) / Malus, Davor (author) / Panjan, Jože (author)

Source: Gradbeni vestnik

Numbering: 2013, volume 62, issue 7

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (521 kB)

Občutljivostna analiza parametrov modeliranja prvega vala onesnaženih voda s cestnih površin

Contibutors: Krzyk, Mario (author) / Panjan, Jože (author)

Source: Gradbeni vestnik

Numbering: 2012, volume 61, issue 12

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (640 kB)

1. TXT document (35 kB)

Nov pristop ocenjevanja nosilnosti voziščnih konstrukcij na podlagi neporušne metode z deflektome...

Contibutors: Želodec, Damjan (author) / Žlender, Bojan (author) / Renčelj, Marko (author)

Source: Gradbeni vestnik

Numbering: 2022, letn. 71

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (3294 kB)

1. TXT document (58 kB)

Relationship between tire ground characteristics and vibration noise

Contibutors: Zhou, Haichao (author) / Li, Huiyun (author) / Liang, Chen (author) / Zhang, Lingxin (author) / Wang, Guolin (author)

1. PDF document (4181 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Peak temperature correlation and temperature distribution during joining of AZ80A Mg alloy by FSW

Contibutors: Sevvel, Pandian (author) / Babu, S. D. Dhanesh (author) / Kumar, R. Senthil (author)

1. PDF document (3954 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Finite mixture estimation algorithm for arbitrary function approximation

Contibutors: Volk, Matej (author) / Nagode, Marko (author) / Fajdiga, Matija (author)

1. PDF document (1068 kB)

Numbering: 2012, volume 58, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Investigating prior parameter distributions in the inverse modelling of water distribution hydrau...

Contibutors: Kozelj, Daniel (author) / Kapelan, Zoran (author) / Novak, Gorazd (author) / Steinman, Franci (author)

1. PDF document (1181 kB)

Numbering: 2014, volume 60, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Design and performance analysis of airbag-soft-manipulator according to characteristic parameters

Contibutors: Liu, Peng (author) / Liu, Yonghong (author) / Wang, Ke (author) / Wei, Xiaoxuan (author) / Xin, Chao (author) / Wu, Xinlei (author)

1. PDF document (2838 kB)

Numbering: 2020, volume 66, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

Process-parameter optimization of WEDM with Inconel 825 alloy using GRA

Contibutors: Subburaj, Arulselvan (author) / Ravindran, Durairaj (author) / Decruz, Arul Marcel Moshi Antony Joseph (author) / Dharmaraj, Vignesh Kumar (author)

1. PDF document (4090 kB)

Numbering: 2021, volume 55, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Hard machining of P235GH steel with different parameters using GSRS modelling

Contibutors: Esther, Edwin Paul Nelson (author) / Ramalingam, Adalarasan (author) / Muthuvel, Santhanakumar (author)

1. PDF document (3425 kB)

Numbering: 2022, volume 56, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

On few-class Q-polynomial association schemes: feasible parameters and nonexistence results

Contibutors: Gavrilyuk, Alexander (author) / Vidali, Janoš (author) / Williford, Jason S. (author)

Source: Ars mathematica contemporanea

Numbering: 2021, volume 20, issue 1

Provider: Univerza na Primorskem, Fakulteta za naravoslovje, matematiko in informacijske tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (502 kB)

1. TXT document (75 kB)

Vpliv živčno-mišičnega treninga na nekatere parametre ravnotežja pri osebah s funkcionalno nestab...

Contibutors: Zorko, Martin (author) / Podmenik, Nadja (author) / Silić, Ajda (author)

Source: Šport (Ljubljana)

Numbering: 2016, volume 64, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za šport

1. PDF document (292 kB)

Interactions between physical parameters, chemical pollutants, and microbes in the built environment

Contibutors: Dovjak, Mateja (editor) / Fujiyoshi, So (editor)

Source: knjige

Provider: Narodna in univerzitetna knjižnica
(Obvezni izvod spletne publikacije)

1. PDF document (735 kB)

1. TXT document (45 kB)

JPEG file (166 kB)

Pregled zdravil za zdravljenje motnje pozornosti s hiperaktivnostjo

Contibutors: Štuhec, Matej (author)

Source: Zdravniški vestnik

Numbering: 2013, volume 82, issue 4

Provider: Slovensko zdravniško društvo
(Obvezni izvod spletne publikacije)

1. PDF document (170 kB)

Correlation between proportions of sperm with DNA fragmentation assessed by Halosperm test and va...

Contibutors: Tandara, Marijan (author)

Source: Zdravniški vestnik

Numbering: 2013, volume 82, issue 5

Provider: Slovensko zdravniško društvo
(Obvezni izvod spletne publikacije)

1. PDF document (129 kB)

1. TXT document (38 kB)

Interlevkini, povezani s Th17, in parametri, povezanimi z dušikovim oksidom pri astmi otrok

Contibutors: Fabian, Elisabeth (author) / Pölöskey, Peter (author) / Kósa, Lajos (author) / Elmadfa, Ibrahim (author) / Réthy, Lajos Attila (author)

Source: Acta medico-biotechnica

Numbering: 2011, volume 4, issue 2

Provider: Univerza v Mariboru, Medicinska fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (492 kB)

1. TXT document (32 kB)

Koncentracija imatiniba v plazmi - nov laboratorijski podatek pri spremljanju zdravljenja slovens...

Contibutors: Mlakar, Jernej (author)

Source: Zdravniški vestnik

Numbering: 2011, volume 80, issue 3

Provider: Slovensko zdravniško društvo
(Obvezni izvod spletne publikacije)

1. PDF document (538 kB)

1. TXT document (30 kB)

Vpliv recesije na parametre kakovosti regionalnih s redišč in njihovo privlačnost

Contibutors: Drobne, Samo (author) / Bogataj, Marija (author)

Source: Revija za univerzalno odličnost

Numbering: 2013, volume 2, issue 2

Provider: Fakulteta za organizacijske študije v Novem mestu
(Obvezni izvod spletne publikacije)

1. PDF document (1734 kB)

1. TXT document (53 kB)

Uporabnost vektorskega analizatorja vezij NanoVNA

Contibutors: Štern, Andrej (author)

Source: Zbornik mednarodne Elektrotehniške in računalniške konference

Numbering: 2021,

Provider: Slovenska sekcija IEEE
(Obvezni izvod spletne publikacije)

1. PDF document (663 kB)

1. TXT document (20 kB)

Quantitative structure-retention relationship analysis of some xylofuranose derivatives by linear...

Contibutors: Kovačević, Strahinja Z. (author) / Jevrić, Lidija R. (author) / Podunavac-Kuzmanović, Sonja O. (author) / Kalajdžija, Nataša D. (author) / Lončar, Eva S. (author)

Source: Acta chimica slovenica

Numbering: 2013, volume 60, issue 2

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (272 kB)

Meritve in modeliranje erozivnosti padavin kot parametra erozije tal

Contibutors: Petan, Sašo (author) / Mikoš, Matjaž (mentor) / Rakovec, Jože (comentor)

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo

1. PDF document (22 MB)

1. TXT document (500 kB)

Dostop v Repozitoriju Univerze

Potresno tveganje izbranih konstrukcijskih sistemov z upoštevanjem nezanesljivosti

Contibutors: Celarec, Daniel (author) / Dolšek, Matjaž (mentor)

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo

1. PDF document (7089 kB)

1. TXT document (765 kB)

Dostop v Repozitoriju Univerze

Accuracy analysis of UAV photogrammetry using RGB and multispectral sensors

Contibutors: Santrač, Nikola (author) / Batilović, Mehmed (author)

Source: Geodetski vestnik

Numbering: 2023, volume 67, issue 4

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (2543 kB)

1. TXT document (51 kB)

Experimental verification of the numerically determined parameters for the non-linear two-axis mo...

Contibutors: Hederić, Željko (author) / Ćorluka, Venco (author) / Varga, Toni (author)

Source: JET on-line
Journal of energy technology

Numbering: 2021, volume 14, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (1274 kB)

Analysis of the influence of parameters when charging and discharging a capacitor using different...

Contibutors: Krašovic, Matic (author) / Virtič, Peter (author)

Source: JET on-line
Journal of energy technology

Numbering: 2022, volume 15, iss. 2

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (884 kB)

1. TXT document (89 kB)

Predicting the optimal parameters by multi-objective decision making while machining an Al6061 al...

Contibutors: Sushma, I Sri Phani (author) / Samuel, G. L. (author) / Varga, Gyula (author)

1. PDF document (1058 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of process parameters for a solid-state-welded AlSl 430 steel joint with the GRG rei...

Contibutors: Senthilkumar, G. (author) / Vinodkumar, V. (author) / Mayavan, T. (author) / Rathinasabapathi, G. (author) / David, Amos Gamaleal (author)

1. PDF document (2319 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Research status and prospects for TIG-MIG hybrid-arc-welding technology

Contibutors: Li, Yinghao (author) / Zong, Ran (author) / Zhang, Yujiao (author) / Yao, Jingzhuo (author)

1. PDF document (4945 kB)

Numbering: 2024, volume 58, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)