Digitalna knjižnica Slovenije

Fatigue problems of transmission belts:

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

1. TXT document (17 kB)

Contibutors: Emri, Igor (author) / Kramar, Janez (author) / Nikonov, Anatolij (author) / Florjančič, Urška (author) / Hribar, Anton (author)

Effect of stop-hole-induced material removal on the fatigue properties of cracked DT4C steel

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (512 kB)

1. TXT document (14 kB)

Contibutors: Zhang, Chunguo (author) / Liu, Rongwei (author) / Liu, Qiankun (author) / Ren, Cuiping (author)

1. PDF document (2330 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Fatigue behaviour of a cast nickel-based superalloy Inconel 792-5A at 700 degree C

Contibutors: Petrenec, Martin (author) / Obrtlík, Karel (author) / Polák, Jaroslav (author) / Kruml, Tomáš (author)

Correlations between fatigue and variations in material constants of PLZT ceramics

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (333 kB)

1. TXT document (19 kB)

Contibutors: Levstik, Adrijan (author) / Bobnar, Vid (author) / Kutnjak, Zdravko (author) / Kosec, Marija (author)

A modified method of von Mises stress-based MWCM for fatigue-life prediction under fully-reversed...

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (77 kB)

1. TXT document (12 kB)

Contibutors: Liu, Bowen (author) / Yan, Xiangqiao (author)

1. PDF document (1708 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Utrujanje s končnim številom nihajnih obremenitev do loma

Contibutors: Žvokelj, Janez (author)

Source: Železarski zbornik

Numbering: 1980, volume 14, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1193 kB)

1. TXT document (22 kB)

Trends in fatigue-crack growth for the 2024 Al-alloy after a single tensile overload

Contibutors: Zhang, Chunguo (author) / Lei, Beibei (author) / Liu, Rongwei (author) / Huo, Fengfeng (author)

1. PDF document (3222 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Preskušanje materialov na odpornost proti utrujanju pri kotaljenju

Contibutors: Kalin, Mitjan (author) / Vižintin, Jože (author)

Modeliranje padavinskih matrik z mešanico Gaussovih funkcij

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (59 kB)

1. TXT document (14 kB)

Contibutors: Klemenc, Jernej (author) / Fajdiga, Matija (author)

Računski model za preračun upogibne trdnosti zobnikov

Numbering: 2001, volume 47, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (720 kB)

1. TXT document (46 kB)

Contibutors: Glodež, Srečko (author) / Flašker, Jože (author) / Jelaska, Damir (author) / Kramberger, Janez (author)

Thermal fatigue of single-crystal superalloys

Numbering: 2002, volume 48, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (232 kB)

1. TXT document (38 kB)

Contibutors: Getsov, Leonid (author) / Semenov, Artem (author) / Semenov, Sergey (author) / Rybnikov, Alexandr (author) / Tikhomirova, Elena A. (author)

1. PDF document (1206 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Fatigue behaviour of X70 steel in crude oil

Contibutors: Gajdoš, L'ubomír (author) / Šperl, Martin (author) / Bystrianský, Jaroslav (author)

Modeliranje naključnih termomehanskih napetostno-deformacijskih stanj

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (317 kB)

1. TXT document (16 kB)

Contibutors: Nagode, Marko (author) / Fajdiga, Matija (author)

Numbering: 2006, volume 52, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (654 kB)

Modelling surface degradation in hot rolling work rolls

Contibutors: Terčelj, Milan (author) / Fazarinc, Matevž (author) / Mrvar, Primož (author) / Žužek, Borut (author) / Fajfar, Peter (author)

Source: RMZ-materials and geoenvironment

Numbering: 2014, volume 61, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (3045 kB)

1. TXT document (17 kB)

The effect of thermo-mechanical processing on the structure, static mechanical properties and fat...

Contibutors: Kubásek, Jiří (author) / Vojtěch, Dalibor (author) / Dvorský, Drahomír (author)

1. PDF document (3551 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Fatigue-strength analysis in the very-high-cycle regime of the TC17 titanium alloy with micro scr...

Contibutors: Ding, Mingchao (author) / Zhang, Yuanliang (author) / Wang, Jinlong (author) / Lu, Huitian (author) / Xian, Hongwei (author) / Hu, Ning (author) / Li, Zexin (author)

1. PDF document (3935 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Določevanje parametrov utrujanja jekla z veliko trdnostjo S1100Q

Contibutors: Knez, Marko (author) / Kramberger, Janez (author) / Glodež, Srečko (author)

Numbering: 2007, volume 53, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (522 kB)

Pojavi pri malocikličnem utrujanju nizkoogljičnega jekla na področju naravnega tečenja

Termično utrujanje utopnih jekel

Contibutors: Černe, Franc (author)

Source: Železarski zbornik

Numbering: 1977, volume 11, issue 4

Provider: Narodna in univerzitetna knjižnica

1. PDF document (266 kB)

1. TXT document (6 kB)

Contibutors: Žvokelj, Janez (author)

Source: Železarski zbornik

Numbering: 1990, volume 24, issue 1

Provider: Narodna in univerzitetna knjižnica

1. PDF document (964 kB)

1. TXT document (21 kB)

Analiza toplotnih razpok na orodjih za tlačno litje aluminija

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author) / Pleterski, Matej (author) / Kosec, Ladislav (author) / Muhič, Mitja (author)

Vrednotenje termomehansko obremenjenih izdelkov z deformacijskim pristopom

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (568 kB)

1. TXT document (28 kB)

Contibutors: Rosa, Uroš (author) / Nagode, Marko (author) / Fajdiga, Matija (author)

Preostala uporabnost kovičenega železniškega mostu (1996, volume 30, issue 5)

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (435 kB)

1. TXT document (53 kB)

Contibutors: Ule, Boris (author) / Vojvodič-Tuma, Jelena (author) / Lovrečič Saražin, Marko (author) / Banovec, Jurij (author) / Kržič, Franci (author) / Beg, Darko (author) / Primec, Čedomir (author)

1. PDF document (1538 kB)

Provider: Narodna in univerzitetna knjižnica

Measurement of strain caused by residual stresses in a welded joint using neutron diffraction

Contibutors: Gubeljak, Nenad (author) / Vojvodič-Tuma, Jelena (author) / Preismeyer, Hans-Georg (author)

Fatigue-life enhancement of sheets made of 34CrNiMo6 steel

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (229 kB)

1. TXT document (15 kB)

Contibutors: Džugan, Jan (author) / Nový, Zbyšek (author) / Marešová, Martina (author)

Establishment of a multi-particle erosion model based on the low-cycle fatigue law

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

1. TXT document (15 kB)

Contibutors: Li, Mingfei (author) / Dou, Yihua (author) / Li, Hong (author) / Cheng, Jiarui (author) / Wei, Wenlan (author)

Microstructural changes of ECAP-processed magnesium alloy AZ91 during cyclic loading at different...

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (687 kB)

1. TXT document (29 kB)

Contibutors: Štěpánek, Roman (author) / Pantělejev, Libor (author) / Man, Ondřej (author) / Guagliano, Mario (author) / Vedani, Maurizio (author) / Mostaed, Ehsan (author)

1. PDF document (4503 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Characteristics of the thermal fatigue resistance for 3.1C, 0.8Si, 0.9Mn, 1.7Cr, 4.5Ni and 0.3Mo ...

Contibutors: Terčelj, Milan (author) / Fajfar, Peter (author) / Godec, Matjaž (author) / Kugler, Goran (author)

1. PDF document (1648 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Numerično simuliranje površinske utrujenostne razpoke na zobeh zobnikov

Contibutors: Fajdiga, Gorazd (author) / Flašker, Jože (author) / Glodež, Srečko (author) / Ren, Zoran (author)

Numbering: 2000, volume 46, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (265 kB)

Testing of thermal fatigue resistance of tools and rolls for hot working

Contibutors: Terčelj, Milan (author) / Fazarinc, Matevž (author) / Kugler, Goran (author)

Source: RMZ-materials and geoenvironment

Numbering: 2017, volume 64, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (838 kB)

1. TXT document (19 kB)

Fatigue-life behaviour and a lifetime assessment of a double-leaf spring using FEM-based software

Contibutors: Borković, Predrag (author) / Šuštaršič, Borivoj (author) / Malešević, Milan (author) / Žužek, Borut (author) / Podgornik, Bojan (author) / Leskovšek, Vojteh (author)

Vedenje WP-preizkušanca pri utrujanju

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (706 kB)

1. TXT document (20 kB)

Contibutors: Gliha, Vladimir (author) / Rojko, Danilo (author)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (222 kB)

The strength of as cast iron and normalized cast iron subjected to cyclic loading

Contibutors: Leonavičius, Mindaugas (author) / Krenevičius, Algimantas (author) / Stupak, Stanislav (author) / Petraitis, Gediminas (author) / Šukšta, Marijonas (author) / Bazaras, Žilvinas (author)

Numerična in eksperimentalna analiza utrujanja v lomnomehanskem preskušancu nestandardne oblike

Numbering: 2006, volume 52, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (783 kB)

1. TXT document (33 kB)

Contibutors: Kovše, Igor (author)

Automated diagnostics of damage to an aluminum alloy under the conditions of high-cycle fatigue

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

1. TXT document (18 kB)

Contibutors: Maruščak, P. O. (author) / Konovalenko, Igor (author) / Karuskevich, Mykhailo (author) / Gliha, Vladimir (author) / Vuherer, Tomaž (author)

Thermal-cycling behavior of CoNiCrAlY bonds coated with thermal barrier coatings (TBCs) produced ...

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (416 kB)

1. TXT document (19 kB)

Contibutors: Kaplan, Mustafa (author) / Uyaner, Mesut (author) / Karaoglanli, Abdullah Cahit (author)

1. PDF document (1698 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Accurate modeling and identification of servo-hydraulic cylinder systems in multi-axial test appl...

Contibutors: Li, Lingjun (author) / Thurner, Thomas (author)

Source: Ventil (Ljubljana)

Numbering: 2013, volume 19, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1667 kB)

Ciklično obnašanje varjenih ojačanih spojev prečka-steber, eksperimentalni testi

Ergonomska ocena napora

Contibutors: Amon, Mojca (author)

Source: Delo in varnost

Numbering: 2021, volume 66, issue 6

Provider: Zavod za varstvo pri delu d.d.

1. PDF document (660 kB)

1. TXT document (12 kB)

Contibutors: Čermelj, Blaž (author) / Sinur, Franc (author) / Može, Primož (author) / Beg, Darko (author)

Source: Gradbeni vestnik

Numbering: 2015, volume 64, issue 5

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (2170 kB)

1. TXT document (41 kB)
2. TXT document (41 kB)

Sanacija sidranja krajnih opornikov železniškega nadvoza na Dunajski cesti v Ljubljani

Contibutors: Hladnik, Leon (author)

Source: Gradbeni vestnik

Numbering: 2021, letn. 70

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (1964 kB)

1. TXT document (32 kB)

Napoved preostale življenjske dobe jeklenega želežniškega mostu na utrujanje na podlagi izmerjene...

Contibutors: Kosič, Mirko (author) / Hekič, Doron (author) / Anžlin, Andrej (author)

Source: Gradbeni vestnik

Numbering: 2023, letn. 72

Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (4791 kB)

1. TXT document (52 kB)

How to experimentally monitor the fatigue behaviour of vibrating mechanical systems?

Contibutors: Cianetti, Filippo (author)

1. PDF document (1029 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Study on the correction of S-N distribution in the welding fatigue analysis method based on the b...

Contibutors: Sun, Yibo (author) / Yang, Xinhua (author)

1. PDF document (2023 kB)

Numbering: 2014, volume 60, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Theoretical and experimental study of fatigue strength of plain woven glass/epoxy composite

Contibutors: Movaghghar, Ali (author) / Lvov, Gennady Ivanovich (author)

1. PDF document (1079 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Railway axle analyses

Contibutors: Dikmen, Ferhat (author) / Bayraktar, Meral (author) / Guclu, Rahmi (author)

1. PDF document (1724 kB)

Numbering: 2012, volume 58, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Numerical methods for TMF cycle modeling

Contibutors: Zaletelj, Henrik (author) / Fajdiga, Gorazd (author) / Nagode, Marko (author)

1. PDF document (1523 kB)

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Harmonic equivalence of the impulse loads in vibration fatigue

Contibutors: Ogrinec, Primož (author) / Slavič, Janko (author) / Boltežar, Miha (author)

Vibrational fatigue and structural dynamics for harmonic and random loads

Numbering: 2019, volume 65, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (479 kB)

1. TXT document (38 kB)

Contibutors: Česnik, Martin (author) / Slavič, Janko (author)

1. PDF document (2423 kB)

Numbering: 2014, volume 60, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Integrated design for fatigue life estimation of structures

Contibutors: Akrache, Radouane (author) / Lu, Jian (author)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (919 kB)

1. TXT document (25 kB)

Elastocaloric cooling

Contibutors: Kabirifar, Parham (author) / Žerovnik, Andrej (author) / Ahčin, Žiga (author) / Porenta, Luka (author) / Brojan, Miha (author) / Tušek, Jaka (author)

1. PDF document (2082 kB)

Numbering: 2019, volume 65, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (73 kB)

On the fatigue of steel catenary risers

Contibutors: Chibueze, Nnamdi Onochie (author) / Ossia, Chinwuba Victor (author) / Okoli, John Umunna (author)

Numbering: 2016, volume 62, nr. 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (796 kB)

High-cycle fatigue behavior of austenitic steel and pure copper under uniaxial, proportional and ...

Contibutors: Pejkowski, Łukasz (author) / Skibicki, Dariusz (author) / Sempruch, Janusz (author)

1. PDF document (8114 kB)

Numbering: 2014, volume 60, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Fatigue of Cellular Structures - a Review

Contibutors: Nečemer, Branko (author) / Vesenjak, Matej (author) / Glodež, Srečko (author)

1. PDF document (3235 kB)

Numbering: 2019, volume 65, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Fatigue design of ferritic-pearlitic nodular cast iron components with surface discontinuities

Contibutors: Gróza, Márton (author) / Váradi, Károly (author)

Numbering: 2018, volume 64, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. 16112667 (1772 kB)

Studying the effect of thermal fatigue on multiple cracks propagating in an SS316L thin flange on...

Contibutors: Mukhta, Fariha (author) / Qayyum, Faisal (author) / Elahi, Hassan (author) / Shah, Masood (author)

1. PDF document (3184 kB)

Numbering: 2019, volume 65, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Application of constant amplitude dynamic tests for life prediction of air springs at various con...

Contibutors: Bešter, Tomaž (author) / Fajdiga, Matija (author) / Nagode, Marko (author)

Assessment of the fatigue parameters from random vibration testing

Numbering: 2014, volume 60, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (784 kB)

1. TXT document (26 kB)

Contibutors: Česnik, Martin (author) / Slavič, Janko (author) / Boltežar, Miha (author)

1. PDF document (1272 kB)

Numbering: 2016, volume 62, nr. 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Numerical modelling of crack growth in a gear tooth root

Contibutors: Podrug, Srđan (author) / Glodež, Srečko (author) / Jelaska, Damir (author)

1. PDF document (1382 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Comparison of mechanical properties of recent and 400-year-old European larch wood

Contibutors: Lipovec Zupanc, Enej (author) / Fajdiga, Gorazd (author) / Humar, Miha (author)

Source: Les (Ljubljana)

Numbering: 2021, volume 70, issue 2

Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (6975 kB)

1. TXT document (1 kB)

Raziskava vplivov na rast razpoke v korenu zoba polimernega zobnika

Contibutors: Zorko, Damijan (author) / Kolar, Klemen (author) / Mojškerc, Bor (author) / Vukašinović, Nikola (author)

Source: Ventil (Ljubljana)

Numbering: 2023, volume 29, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (873 kB)

1. TXT document (39 kB)

Failure analysis of a tractor front axle

Contibutors: Yavuz, Ibrahim (author)

1. PDF document (1536 kB)

Numbering: 2023, volume 57, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental study on MAG welded E350 HSLA steel joints

Contibutors: Bradeesh Moorthy, S. (author) / Malayalamurthy, R. (author) / Amirthagadeswaran, Koduvayur Sankaranarayanan (author)

1. PDF document (2918 kB)

Numbering: 2024, volume 58, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Evaluation of the behavior of welded structures under low-cycle fatigue loading

Contibutors: Bulatović, Srđan (author) / Aleksić, Vujadin (author) / Zečević, Bojana (author) / Milutinović, Mladomir (author)

Fatigue behaviour of copper-brazed 316L stainless steel

Numbering: 2024, volume 58, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (808 kB)

1. TXT document (31 kB)

Contibutors: Kralj, Jernej (author) / Hanželič, Blaž (author) / Glodež, Srečko (author) / Kramberger, Janez (author) / Satošek, Roman (author) / Nečemer, Branko (author)

1. PDF document (2326 kB)

Numbering: 2024, volume 58, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Effects of temperature and strain amplitude on low-cycle fatigue properties of nickel-based singl...

Contibutors: Du, Xiaoming (author) / Dong, Weiye (author) / Zhu, Xiang (author) / Liu, Jide (author) / Wang, Zhijun (author) / Li, Tianfu (author)

1. PDF document (3683 kB)

Numbering: 2024, volume 58, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Wear mechanism for deep-wells drilling tools

Contibutors: Šporin, Jurij (author) / Vukelič, Željko (author)

1. PDF document (4493 kB)

Numbering: 2024, volume 58, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Visoko in nizko legirana indefinitna železova litina

Contibutors: Klančnik, Urška (author) / Drobne, Matej (author) / Kogovšek, Iztok (author) / Mastnak, Janko (author) / Fajfar, Peter (author) / Mrvar, Primož (author) / Medved, Jože (author)

Source: Livarski vestnik

Numbering: 2017, volume 64, issue 2

Provider: Društvo livarjev Slovenije

1. PDF document (1322 kB)

Fatigue of triply periodic minimal surface (TPMS) metamaterials – a review

Nanotehnologija v metalurgiji

Contibutors: Rudolf, Rebeka (author) / Shariq, Mohammed (author) / Ferčec, Urban (author) / Križman, Alojz (author) / Majerič, Peter (author)

Source: Livarski vestnik

Numbering: 2018, volume 65, issue 3

Provider: Društvo livarjev Slovenije

1. PDF document (230 kB)

1. TXT document (37 kB)

Contibutors: Novak, Nejc (assignee) / Žnidarič, Žiga (author) / Nečemer, Branko (author) / Vesenjak, Matej (author) / Glodež, Srečko (author)