Digitalna knjižnica Slovenije

1. PDF document (2664 kB)

Numbering: 2008, volume 54, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Predvidevanje nelinearnega lezenja izdelkov

Contibutors: Spoormaker, Jan (author) / Skrypnyk, Ihor (author) / Heidweiller, Anton (author)

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (754 kB)

Določevanje nevtralne točke pri ploskovnem valjanju

Contibutors: León, J. (author) / Luis, C.J. (author) / Luri, R. (author) / Reyero, J. (author)

Vključitev numeričnih analiz v zgodnjih fazah konstrukcijskega postopka

Numbering: 2007, volume 53, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (290 kB)

1. TXT document (26 kB)

Contibutors: Bučar, Tomaž (author) / Janežič, Miha (author) / Pangeršič, Primož (author) / Fajdiga, Matija (author)

Metoda robnih elementov za dinamiko viskoelastične Maxwellove tekočine

Numbering: 2004, volume 50, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (510 kB)

1. TXT document (56 kB)

Contibutors: Škerget, Leopold (author) / Požarnik, Matej (author)

Dinamični model rotorskega sistema z gibkim členom in dvema neosnima gredama

Numbering: 2002, volume 48, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (363 kB)

1. TXT document (65 kB)

Contibutors: Bogdevičius, Marijonas (author) / Spruogis, Bronislovas (author) / Turla, Vytautas (author)

Dinamično odzivanje valjaste cevi na gibajoči se tlak

Numbering: 2004, volume 50, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (771 kB)

1. TXT document (49 kB)

Contibutors: Saranjam, Bahador (author) / Bakhshandeh, Kambiz (author) / Kadivar, Mohammad-Hassan (author)

Numbering: 2007, volume 53, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (420 kB)

Preskušanje materialov na odpornost proti utrujanju pri kotaljenju

Contibutors: Kalin, Mitjan (author) / Vižintin, Jože (author)

Source: Kovine zlitine tehnologije

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (59 kB)

1. TXT document (14 kB)

Naprava s pnevmatično aktivno površino: Tehnike krmiljenja gibljivih predmetov

Contibutors: Uran, Suzana (author) / Šafarič, Riko (author)

Metoda robnih elementov v akustiki - primer ovrednotenja zvočnega polja enosmernega elektromotorja

Numbering: 2002, volume 48, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (14 MB)

1. TXT document (71 kB)

Contibutors: Furlan, Martin (author) / Boltežar, Miha (author)

Nova metoda za določevanje krivulje mejnih deformacij v digitalnem okolju

Numbering: 2004, volume 50, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (614 kB)

1. TXT document (57 kB)

Contibutors: Petek, Aleš (author) / Pepelnjak, Tomaž (author) / Kuzman, Karl (author)

1. PDF document (1061 kB)

Numbering: 2005, volume 51, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (58 kB)

2D numeric simulation of serrated-chip formation in orthogonal cutting of AISI316H stainless steel

Contibutors: Gok, Arif (author)

Source: Materiali in tehnologije

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (760 kB)

1. TXT document (26 kB)

Analiza deformacij vrtal po analitični metodi in s končnimi elementi

Contibutors: Taşkesen, Ahmet (author) / Mendi, Faruk (author) / Kisioglu, Yasin (author) / Kulekci, Mustafa Kemal (author)

Using buckling analysis to predict wrinkling in incremental sheet metal forming

Numbering: 2006, volume 52, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (281 kB)

1. TXT document (29 kB)

Contibutors: Lemeš, Samir (author) / Zaimović-Uzunović, Nermina (author)

1. PDF document (1484 kB)

Numbering: 2008, volume 54, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (18 kB)

Equivalent stress analysis of processing tube tension reducing of the new steel 33Mn2V for oil we...

Contibutors: Wang, Fuzhong (author) / Lu, Lu (author) / Zhang, Huichun (author) / Fei, Ying (author) / Liu, Guoquan (author) / Ai, Jiahe (author)

Particularities of an incremental forming application in multi-layer construction elements

Numbering: 2008, volume 54, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (385 kB)

1. TXT document (13 kB)

Contibutors: Petek, Aleš (author) / Zaletelj, Viktor (author) / Kuzman, Karl (author)

1. PDF document (1146 kB)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (15 kB)

Homologacija elementov prototipnega vozila

Contibutors: Kostanjevec, Andrej (author) / Malnarič, Vili (author) / Jurejevčič, Tomaž (author) / Fajdiga, Matija (author)

Numbering: 1999, volume 45, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (742 kB)

Konstruiranje izdelka s pomočjo tehnike optimizacije stika

Contibutors: Páczelt, István (author) / Baksa, Attila (author) / Szabó, Tamás (author)

Malociklična nosilnost pri ležajih z utrjeno kotalno površino

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (887 kB)

1. TXT document (46 kB)

Contibutors: Kunc, Robert (author) / Prebil, Ivan (author) / Torkar, Matjaž (author)

Source: Kovine zlitine tehnologije

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (109 kB)

1. TXT document (15 kB)

Primerjalna analiza preračuna prednje preme po metodi končnih elementov in standardu DIN743

Contibutors: Okorn, Ivan (author) / Bešter, Tomaž (author) / Orbanić, Petar (author) / Fajdiga, Matija (author)

Numbering: 2006, volume 52, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (392 kB)

Multiple parametric models of heat transfer in lightweight building elements with ventilated cavi...

Contibutors: Leskovšek, Uroš (author) / Arkar, Ciril (author) / Černe, Boštjan (author) / Medved, Sašo (author)

Numbering: 2008, volume 54, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (389 kB)

Vibroakustično modeliranje alternatorja

Contibutors: Furlan, Martin (author) / Rebec, Robert (author) / Černigoj, Andrej (author) / Čelič, Damjan (author) / Čermelj, Primož (author) / Boltežar, Miha (author)

Modeliranje sestavov kovine in elastomerov z uporabo postopka končnih elementov

Numbering: 2006, volume 52, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (634 kB)

1. TXT document (49 kB)

Contibutors: Floody, Sergio E. (author) / Arenas, Jorge, P. (author) / de Espindola, Jose J. (author)

Optimiranje oblike konstrukcij: tristranični projektni element

Numbering: 2007, volume 53, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (288 kB)

1. TXT document (42 kB)

Contibutors: Kegl, Marko (author)

Numbering: 2002, volume 48, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (315 kB)

Numerične analize preoblikovanja cevi z visokim notranjim tlakom

Contibutors: Pepelnjak, Tomaž (author)

Vpliv različnih parametrov na trdnostni preračun toplotno obremenjenega žarometa

Numbering: 2004, volume 50, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (781 kB)

1. TXT document (47 kB)

Contibutors: Wagner, Andrej (author) / Bučar, Tomaž (author) / Fajdiga, Matija (author)

Hiter algoritem za poenostavljanje in obnovitev trikotniških mrež za prenos rezultatov MKE preko ...

Numbering: 2006, volume 52, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (703 kB)

1. TXT document (31 kB)

Contibutors: Krivograd, Sebastian (author) / Hren, Gorazd (author) / Žalik, Borut (author) / Jezernik, Anton (author)

Metode za oblikovanje elementov sesalnega zbiralnika batnega motorja z notranjim zgorevanjem

Numbering: 2003, volume 49, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (847 kB)

1. TXT document (48 kB)

Contibutors: Kozarac, Darko (author) / Mahalec, Ivan (author) / Lulić, Zoran (author)

Vrednotenje termomehansko obremenjenih izdelkov z deformacijskim pristopom

Numbering: 2004, volume 50, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (286 kB)

1. TXT document (45 kB)

Contibutors: Rosa, Uroš (author) / Nagode, Marko (author) / Fajdiga, Matija (author)

Investigation of stress concentration factor for finite-width orthotropic rectangular plates with...

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (435 kB)

1. TXT document (53 kB)

Contibutors: Bakhshandeh, Kambiz (author) / Rajabi, Iraj (author) / Rahimi, Farhad (author)

Raziskave nosilnega okvira vozila Šinkovec MM

Numbering: 2008, volume 54, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (622 kB)

1. TXT document (20 kB)

Contibutors: Malnarič, Vili (author) / Kostanjevec, Andrej (author) / Jurejevčič, Tomaž (author) / Fajdiga, Matija (author)

Numbering: 1999, volume 45, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (486 kB)

Primerjava masnega ter magnetnega neuravnoteženja rotorja glede na vibracije enosmernih elektromo...

Contibutors: Petrič, Matej (author) / Furlan, Martin (author) / Boltežar, Miha (author)

Analize kakovosti pridrževanja pločevine pri globokem vleku

Numbering: 2003, volume 49, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (581 kB)

1. TXT document (21 kB)

Contibutors: Pepelnjak, Tomaž (author) / Kampuš, Zlatko (author)

1. PDF document (1140 kB)

Numbering: 2001, volume 47, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (47 kB)

The constructive and geometrical optimization of the junctions in structures made from laminated ...

Contibutors: Hadar, Anton (author) / Nica, Mariana N. (author) / Constantinescu, Ioan N. (author) / Pastrama, Stefan Dan (author)

Process factors affecting deposition rate of TiN coating on a machine component

Numbering: 2006, volume 52, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (411 kB)

1. TXT document (15 kB)

Contibutors: Saikaew, Charnnarong (author)

Source: Materiali in tehnologije

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (1354 kB)

1. TXT document (28 kB)

Numerical simulation of crack modeling using extended finite element method

Contibutors: Jovičić, Gordana (author) / Živković, Miroslav (author) / Jovičić, Nebojša (author)

CAM algorithm as important element by achieving of good machined surface quality

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (474 kB)

1. TXT document (18 kB)

Contibutors: Kopač, Janez (author) / Kržič, Primož (author)

1. PDF document (1119 kB)

Numbering: 2008, volume 54, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (17 kB)

Naprava s pnevmatično aktivno površino: Tehnike krmiljenja lege togih objektov s povratno zvezo i...

Contibutors: Uran, Suzana (author) / Šafarič, Riko (author)

Večkriterialno optimiranje avtomobilske konstrukcije z uporabo metode končnih elementov

Numbering: 2002, volume 48, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (522 kB)

1. TXT document (66 kB)

Contibutors: Glavač, Matej (author) / Ren, Zoran (author)

Naprava s pnevmatično aktivno površino - razvoj prototipa in Ljapunovova analiza stabilnosti

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (304 kB)

1. TXT document (32 kB)

Contibutors: Uran, Suzana (author) / Šafarič, Riko (author) / Winther, Tobias (author)

Numerično simuliranje površinske utrujenostne razpoke na zobeh zobnikov

Numbering: 2002, volume 48, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (443 kB)

1. TXT document (64 kB)

Contibutors: Fajdiga, Gorazd (author) / Flašker, Jože (author) / Glodež, Srečko (author) / Ren, Zoran (author)

Numbering: 2000, volume 46, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (265 kB)

Izboljšanje dinamičnih značilnosti rotorskega sistema z razvojnim algoritmom

Contibutors: Saruhan, Hamit (author)

An approach to the optimization of a thin-walled Z-beam

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (971 kB)

1. TXT document (54 kB)

Contibutors: Anđelić, Nina (author) / Milošević Mitić, Vesna (author) / Maneski, Taško (author)

Zglobna cev, koja je naročito podesna za sprovodjenje gasova od jednog elementa parnog kotla ka ...

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (303 kB)

1. TXT document (23 kB)

Recenzija knjige

Contibutors: Podgornik, Bojan (author)

Source: Ventil (Ljubljana)

Numbering: 2012, volume 18, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (222 kB)

1. TXT document (6 kB)

Source: Strojni deli

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1336 kB)

1. TXT document (10 kB)

Optimization of the shape of axi-symmetric rubber bumpers

Contibutors: Mankovits, Tamás (author) / Szabó, Tamás (author) / Kocsis, Imre (author) / Páczelt, István (author)

1. PDF document (2350 kB)

Numbering: 2014, volume 60, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Finite element analysis of a tire steady rolling on the drum and comparison with experiment

Contibutors: Korunović, Nikola (author) / Trajanović, Miroslav (author) / Stojković, Miloš (author) / Mišić, Dragan (author) / Milovanović, Jelena (author)

1. PDF document (2818 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Parameters influencing the dynamic behaviour of the carrying structure of a type h portal crane

Contibutors: Vasiljević, Radivoje (author) / Gašić, Milomir M. (author) / Savković, Mile M. (author)

1. PDF document (2005 kB)

Numbering: 2016, volume 62, nr. 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Work hardening of non-axisymmetric die-less spinning

Contibutors: Jia, Zhen (author) / Han, Zhiren (author) / Liu, Baoming (author) / Xiao, Yong (author)

1. PDF document (2888 kB)

Numbering: 2017, volume 63, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Computation of stress intensity factor in functionally graded plates under thermal shock

Contibutors: Nazari, Mohammad Bagher (author) / Shariati, Mahmoud (author) / Eslami, Mohammad Reza (author) / Hassani, Behrooz (author)

1. PDF document (1069 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Prediction of wall thickness distribution in simple thermoforming moulds

Contibutors: Erdogan, Ertugrul Selcuk (author) / Eksi, Olcay (author)

1. PDF document (1295 kB)

Numbering: 2014, volume 60, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

A new design solution for aircraft wheels that reduces overpressure in the tire while retaining i...

Contibutors: Petrovic, Dalibor (author) / Dodić, Marjan (author) / Kapor, Nenad J. (author)

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (647 kB)

3D FE modelling of machining forces during AISI 4140 hard turning

Contibutors: Tzotzis, Anastasios (author) / García-Hernández, César (author) / Huertas-Talón, José-Luis (author) / Kyratsis, Panagiotis (author)

1. PDF document (3279 kB)

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Comparative analysis of static and dynamic performance of nonpneumatic tire with flexible spoke s...

Contibutors: Zhang, Zifeng (author) / Fu, Hongxun (author) / Liang, Xuemeng (author) / Chen, Xiaoxia (author) / Tan, Di (author)

1. PDF document (3687 kB)

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Effect of thermal barrier coating on the thermal stress of gas microturbine blades and nozzles

Contibutors: Tenango-Pirin, Oscar (author) / Reynoso-Jardón, Elva (author) / García, Juan Carlos (author) / Mariaca, Yahir (author) / Hernández, Yuri Sara (author) / Neco, Raúl (author) / Dávalos, Omar (author)

1. PDF document (1351 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Angle of twist of a double-bent leaf flexure under torsion

Contibutors: Nguyen, Nghia Huu (author) / Lee, Hong-Cheol (author) / Jo, Sunghee (author) / Lee, Dong-Yeon (author)

1. PDF document (1151 kB)

Numbering: 2018, volume 64, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Consideration of body forces within finite element analysis

Contibutors: Glenk, Christian (author) / Hüter, Florian (author) / Billenstein, Daniel (author) / Rieg, Frank (author)

Numbering: 2018, volume 64, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

Computation method in failure analysis of mechanically fastened joints at layered composits

Contibutors: Ilić, Ivana (author) / Petrović, Zlatko (author) / Maksimović, Mirko (author) / Stupar, Slobodan (author) / Stamenković, Dragi (author)

1. PDF document (2696 kB)

Numbering: 2012, volume 58, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Evaluation of the Coulomb friction coefficient in DC05 sheet metal forming

Contibutors: Giuliano, Gillo (author)

1. PDF document (1083 kB)

Numbering: 2015, volume 61, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Compressive response determination of closed-cell aluminium foam and linear-elastic finite elemen...

Contibutors: Mankovits, Tamás (author) / Varga, Tamás Antal (author) / Manó, Sándor (author) / Kocsis, Imre (author)

1. PDF document (1420 kB)

Numbering: 2018, volume 64, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Fatigue life estimation of notched structural components

Contibutors: Stamenković, Dragi (author) / Maksimović, Katarina (author) / Nikolić-Stanojević, Vera (author) / Maksimović, Stevan (author) / Stupar, Slobodan (author) / Vasović, Ivana (author)

1. PDF document (1560 kB)

Numbering: 2010, volume 56, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Bolted connection of an end-plate cantilever beam

Contibutors: Oman, Simon (author) / Nagode, Marko (author)

1. PDF document (2534 kB)

Numbering: 2017, volume 63, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Parametric optimization of the output shaft of a portal axle using finite element analysis

Contibutors: Ooi, Jong Boon (author) / Wang, Xin (author) / Lim, Ying Pio (author) / Tan, ChingSeong (author) / Ho, Jee-Hou (author) / Wong, Kok-Cheong (author)

1. PDF document (1568 kB)

Numbering: 2013, volume 59, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

An experimental and numerical investigation of an improved shearing process with different punch ...

Contibutors: Gomah, Mahmod (author) / Demiral, Murat (author)

1. PDF document (1323 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Theoretical and experimental study of fatigue strength of plain woven glass/epoxy composite

Contibutors: Movaghghar, Ali (author) / Lvov, Gennady Ivanovich (author)

1. PDF document (1079 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

An Experimental investigation and numerical simulation in SPF of AA 5083 alloy using programming ...

Contibutors: Balasubramanian, Muthusamy (author) / Ganesh, Pasupathy (author) / Ramanathan, Kalimuthu (author) / Senthil Kumar, Velukkudi Santhanam (author)

1. PDF document (2038 kB)

Numbering: 2017, volume 63, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Determining optimum rotary blade design for wind-powered water-pumping systems for local selected...

Contibutors: Mohammed, Abdulbasit (author) / Lemu, Hirpa G. (author) / Sirahbizu, Belete (author)

1. PDF document (1163 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Residual stress and deformation analysis in machining split straight bevel gears

Contibutors: Wang, Bin (author) / Yan, Chenxiao (author) / Li, Jubo (author) / Feng, Peiyao (author) / Wang, Shuaipu (author) / Chen, Shuo (author) / Su, Jianxin (author)

1. PDF document (3193 kB)

Numbering: 2021, volume 67, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Optimization of running blade prosthetics utilizing crow search algorithm assisted by artificial ...

Contibutors: Rosel Solis, Nanuel Javier (author) / Dávalos Ramírez, José Omar (author) / Molina Salazar, Javier (author) / Ruiz Ochoa, Juan Antonio (author) / Gómez Roa, Antonio (author)

1. PDF document (1836 kB)

Numbering: 2021, volume 67, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Modeling nonlinear viscoelastic nanoindentation of PVAc at different unloading rates

Contibutors: Kucuk, Yilmaz (author)

1. PDF document (1253 kB)

Numbering: 2013, volume 59, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Dynamic model for the stress and strain state analysis of a spur gear transmission

Contibutors: Nikolić-Stanojević, Vera (author) / Dolićanin, Ćemal (author) / Dimitrijević, Dejan (author)

1. PDF document (3899 kB)

Numbering: 2012, volume 58, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Nonlinear approach to thin-walled beams with a symmetrical open section

Contibutors: Anđelić, Nina (author)

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (562 kB)

The effect of billet wall thickness on the rotary compression process for hollow parts

Contibutors: Tomczak, Janusz (author) / Bulzak, Tomasz (author) / Pater, Zbigniew (author)

1. PDF document (3563 kB)

Numbering: 2015, volume 61, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Linear and quadratic solid-shell elements for quasi-static and dynamic simulations of thin 3D str...

Contibutors: Wang, Peng (author) / Chalal, Hocine (author) / Abed-Meraim, Farid (author)

1. PDF document (1636 kB)

Numbering: 2017, volume 63, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Residual stress-induced distortions in laser powder bed additive manufacturing of nickel-based su...

Contibutors: Poyraz, Özgür (author) / Kuşhan, Melih Cemal (author)

1. PDF document (1428 kB)

Numbering: 2019, volume 65, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A novel dorsal trimline approach for passive-dynamic ankle-foot orthoses

Contibutors: Surmen, Hasan Kemal (author) / Akalan, Nazif Ekin (author) / Fetvaci, Cuneyt (author) / Arslan, Yunus Ziya (author)

An improved quasi-dynamic analytical method to predict skidding in roller bearings under conditio...

Numbering: 2018, volume 64, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. 15968795 (1984 kB)

1. TXT document (37 kB)

Contibutors: Li, Junning (author) / Chen, Wei (author) / Zhang, Libo (author) / Wang, Taofeng (author)

1. PDF document (1155 kB)

Numbering: 2016, volume 62, nr. 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Use of genetic algorithms for optimal design of sandwich panels subjected to underwater shock loa...

Contibutors: Salimi, Hamidreza (author) / Saranjam, Bahador (author) / Fard, Ahmad Hoseini (author) / Ahmadzadeh, Mohsen (author)

1. PDF document (2361 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

An analysis of continuous sandwich panels with profiled faces

Contibutors: Čuk, Metod (author) / Kosel, Franc (author) / Zrnić, Nenad Đ. (author) / Jerman, Boris (author)

1. PDF document (1945 kB)

Numbering: 2017, volume 63, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Active structural derivator in the design crystallization phase of L7e vehicle structures

Contibutors: Jedrzejczyk, Roman Pawel (author) / Alb, Michael Sigmar (author)

1. PDF document (4999 kB)

Numbering: 2019, volume 65, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (88 kB)

Parametric study of a permanent-magnet stepper motor's stepping accuracy potential

Contibutors: Škofic, Jan (author) / Koblar, David (author) / Boltežar, Miha (author)

1. PDF document (2035 kB)

Numbering: 2014, volume 60, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Integrated design for fatigue life estimation of structures

Contibutors: Akrache, Radouane (author) / Lu, Jian (author)

Judging method of tooth damage behavior of the high speed milling cutter

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (919 kB)

1. TXT document (25 kB)

Contibutors: Zhang, Minghui (author) / Zheng, Minli (author) / Jiang, Bin (author)

1. PDF document (3574 kB)

Numbering: 2018, volume 64, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

BEM-based algorithm for URANS simulations of flow over a square cylinder

Contibutors: Lupše, Janez (author) / Škerget, Leopold (author) / Ravnik, Jure (author)

1. PDF document (1881 kB)

Numbering: 2015, volume 61, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Design of a prototype system operant in lunar environment

Contibutors: Ambu, Rita (author) / Bertetto, Andrea Manuello (author) / Falchi, Costantino (author)

1. PDF document (2167 kB)

Numbering: 2014, volume 60, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

An experimental and numerical investigation of a grid composite cylindrical shell subjected to tr...

Contibutors: Arashmehr, Jafar (author) / Rahimi, Gholam Hossein (author) / Rasouli, Seyed Fazel (author)

1. PDF document (3506 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Low-frequency sonoporation in vitro

Contibutors: Jelenc, Jure (author) / Jelenc, Jože (author) / Miklavčič, Damijan (author) / Maček Lebar, Alenka (author)

Numbering: 2012, volume 58, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (974 kB)

Grounding characteristics of a non-pneumatic mechanical elastic tire in a rolling state with a ca...

Contibutors: Du, Xianbin (author) / Zhao, Youqun (author) / Wang, Qiang (author) / Fu, Hongxun (author) / Lin, Fen (author)

1. PDF document (3028 kB)

Numbering: 2019, volume 65, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

FE-modeling of cold rolling by in-feed method of circular grooves

Contibutors: Niţu, Eduard (author) / Iordache, Monica (author) / Marincei, Luminiţa (author) / Charpentier, Isabelle (author) / Le Coz, Gaël (author) / Ferron, Gérard (author) / Ungureanu, Ion (author)

1. PDF document (1538 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Proposal for an experimental-numerical method for friction description in sheet metal forming

Contibutors: Trzepieciński, Tomasz (author) / Lemu, Hirpa G. (author)

1. PDF document (2541 kB)

Numbering: 2015, volume 61, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A new method for machinery fault diagnoses based on an optimal multiscale morphological filter

Contibutors: Tan, Wei (author) / Chen, Xiaoan (author) / Dong, Shaojiang (author)

1. PDF document (2025 kB)

Numbering: 2013, volume 59, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Studying the fatigue life of a non-pneumatic wheel by using finite-life design for life prediction

Contibutors: Xiao, Zhen (author) / Zhao, You Qun (author) / Lin, Fen (author) / Zhu, Ming Min (author) / Deng, Yao Ji (author)

1. PDF document (2789 kB)

Numbering: 2018, volume 64, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Buckling of joined composite conical shells using shear deformation theory under axial compression

Contibutors: Izadi, Mohammad Hadi (author) / Hashemi, Shahrokh Hosseini (author) / Habibnejad Korayem, Moharam (author)

1. PDF document (1136 kB)

Numbering: 2019, volume 65, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Conceptual design and preliminarily structural analysis of inflatable basket for an asteroid capt...

Contibutors: Ceruti, Alessandro (author) / Pettenuzzo, Siro (author) / Tuveri, Marco (author)

1. PDF document (1754 kB)

Numbering: 2015, volume 61, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Applying thermomechanical analogy to predict the arterial residual stress state

Contibutors: Urevc, Janez (author) / Brumen, Milan (author) / Flis, Vojko (author) / Štok, Boris (author)

1. PDF document (4185 kB)

Numbering: 2015, volume 61, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (74 kB)

A study of quality parameters and behaviour of self-piercing riveted aluminium sheets with differ...

Contibutors: Mucha, Jacek (author)

1. PDF document (2362 kB)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analysis of the screening accuracy of a linear vibrating screen with a multi-layer screen mesh

Contibutors: Yan, Hongwei (author) / Li, Yajie (author) / Yuan, Fei (author) / Peng, Fangxian (author) / Yang, Xiong (author) / Hou, Xiangrong (author)

1. PDF document (1220 kB)

Numbering: 2020, volume 66, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Cohesive zone parameters selection for mode-I prediction of interfacial delamination

Contibutors: Moslemi, Mohsen (author) / Khoshravan, Mohammadreza (author)

1. PDF document (1106 kB)

Numbering: 2015, volume 61, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

Experimental equipment research for cryogenic Joule-Thompson cryocoolers comparison in IR technol...

Contibutors: Sicovic, Aleksandar (author) / Milinovic, Momčilo (author) / Jeremic, Olivera (author)

1. PDF document (2062 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Estimating the strain-rate dependent parameters of Cowper-Symonds and Johnson-Cook material model...

Contibutors: Škrlec, Andrej (author) / Klemenc, Jernej (author)

1. PDF document (2539 kB)

Numbering: 2016, volume 62, nr. 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)