Digitalna knjižnica Slovenije

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

Comparison of the surface and anticorrosion properties of SiOsub2 and TiOsub2 nanoparticle epoxy ...

Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)

Increasing the wear resistance of Al-Mg components using thermal-spray coatings

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (541 kB)

1. TXT document (30 kB)

Contibutors: Lukauskaitë, Raimonda (author) / Černašejus, Olegas (author) / Škamat, Jelena (author) / Asadauskas, Svajus (author) / Ručinskienë, Alma (author) / Kalpokaitë-Dičkuvienë, Regina (author) / Višniakov, Nikolaj (author)

Compositional and microstructural study of sol-gel-derived PbZrsub(0.3)Tisub(0.7)Osub3 /Alsub2Osu...

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

1. TXT document (30 kB)

Contibutors: Khomyakova, Evgeniya (author) / Benčan, Andreja (author) / Malič, Barbara (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2256 kB)

Corrosion resistance of CrAlVN coatings deposited on PCrNi3Mo steel surfaces with reactive magnet...

Contibutors: Jin, Hao (author) / Li, De-Yuan (author) / Sun, Hai-Jing (author) / Wang, Lei (author) / Guo, Ce-An (author) / Zhang, Gang (author)

1. PDF document (1215 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Tribološke lastnosti jekla nitriranega v plazmi in prekritega z DLC-prevleko

Contibutors: Podgornik, Bojan (author) / Vižintin, Jožef (author) / Leskovšek, Vojteh (author) / Ronkainen, Helena (author) / Holmberg, Kenneth (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (271 kB)

Površinska obdelava orodij za hladno oblikovanje

Contibutors: Legat, Franc (author)

The effect of current types on the microstructure and corrosion properties of Ni/nanoAlsub2Osub3 ...

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (20 kB)

1. TXT document (7 kB)

Contibutors: Kucharska, Beata (author) / Krawczynska, Agnieszka (author) / Rożniatowski, Krzysztof (author) / Zdunek, Joanna (author) / Poplawski, Karol (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (5584 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Influence of the process parameters on high-velocity oxygen-fuel-sprayed 75Cr3C2-25NiCr coatings

Contibutors: Nagulan, BalaGanesh (author) / Thamilkolundu, SenthilKumar (author) / Murugesan, Chandrasekar (author)

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Isothermal oxidation behavior of electrospark deposited NiCrAlY coatings on a Ni-based single-cry...

Contibutors: Guo, Cean (author) / Liang, Ting (author) / Lu, Fengsheng (author) / Liang, Zhengang (author) / Zhao, Shuang (author) / Zhang, Jian (author)

1. PDF document (1642 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Skoraj 7000 m asfaltne prevleke in novi most

Source: Naša skupnost (Grosuplje)

Numbering: 1983, volume 9, issue 10

Provider: Mestna knjižnica Ljubljana

1. PDF document (584 kB)

1. TXT document (4 kB)

Tankoplastne prevleke za zaščito orodij za tlačno litje plastike

Contibutors: Tasevski, M. (author)

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (705 kB)

Electron-optical and Auger electron spectroscopy studies of a zirconium conversion coating on alu...

Contibutors: Adesoji Adediran, Adeolu (author) / Oki, Makanjuola (author) / Akintola, Sarah Abidemi (author) / Ogunsemi, Bamidele (author) / Akinlabi, Esther T. (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (897 kB)

Characterization of hard protective coatings based on (Cr,Ta)N

Contibutors: Čekada, Miha (author) / Panjan, Peter (author) / Navinšek, Boris (author) / Cvelbar, Franc (author)

Effects of heat inputs on the structure of Ni-based amorphous composite coatings applied with las...

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (118 kB)

1. TXT document (15 kB)

Contibutors: Li, Ruifeng (author) / Chen, Zhaohui (author) / Gu, Jiayang (author) / Wang, Yuxin (author) / Wu, Mingfang (author) / Tian, Yingtao (author)

1. PDF document (1624 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of an electromagnetic field on the microstructure and properties of Cr(Ti)AlN hard coating...

Contibutors: Wang, Jin (author) / Ma, Dayan (author) / Liu, Qi (author) / Jin, Yetang (author) / Wang, Xu (author)

1. PDF document (1675 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Duplex coating of P/M M2-grade ledeburitic steel

Contibutors: Jurči, Peter (author) / Stolař, Pavel (author) / Suchánek, Jan (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (267 kB)

Nanašanje trdih zaščitnih prevlek s katodnim lokom

Contibutors: Panjan, Peter (author)

Source: Vakuumist

Numbering: 2002, volume 22, issue 2/3

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (2082 kB)

Characterization of PVD Cr-C, Cr(C,N) and Cr-N hard coatings

Contibutors: Čekada, Miha (author) / Maček, Marijan (author) / Panjan, Peter (author) / Navinšek, Boris (author)

Formation of a corrosion-resistant alumina coating on a 6061 aluminum alloy using a combination o...

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (90 kB)

1. TXT document (16 kB)

Contibutors: Paksoy, Ahmet Hilmi (author) / Muhaffel, Faiz (author) / Koca, Merve (author) / Gokce, Ozge (author) / Cimenoglu, Huseyin (author)

1. PDF document (1979 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Raziskave postopka neposrednega laserskega sintranja

Contibutors: Dolinšek, Slavko (author)

Effect of the TiBN coating on a HSS drill when drilling the MA8M Mg alloy

Numbering: 2004, volume 50, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (931 kB)

1. TXT document (39 kB)

Contibutors: Karaca, Faruk (author) / Aksakal, Bünyamin (author)

1. PDF document (1037 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Možnosti nadomeščanja galvanskih postopkov nanašanja tankih zaščitnih prevlek z ekološko neoporeč...

Contibutors: Panjan, Peter (author) / Navinšek, Boris (author)

Source: Vakuumist

Numbering: 1997, volume 17, issue 3

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (3975 kB)

1. TXT document (36 kB)

Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy u...

Contibutors: Tolga Ozkan, Murat (author) / Ulas, Hasan Basri (author) / Bilgin, Musa (author)

Wear-resistant single-phase high-entropy alloy coatings prepared on TI6AL4V with laser cladding

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

1. TXT document (38 kB)

Contibutors: Juan, Yongfei (author) / Jun, Li (author) / Jiang, Yunqiang (author) / Jia, Wanli (author) / Lu, Zhongjie (author)

1. PDF document (3494 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

The analysis of complex tribological system of single point incremental sheet metal forming - SPIF

Contibutors: Petek, Aleš (author) / Podgornik, Bojan (author) / Kuzman, Karl (author) / Čekada, Miha (author) / Waldhauser, Wolfgang (author) / Vižintin, Jože (author)

1. PDF document (3358 kB)

Numbering: 2008, volume 54, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Characteristics of the AlTiCrN+DLC coating deposited with a cathodic arc and the PACVD process

Contibutors: Lukaszkowicz, Krzysztof (author) / Jonda, Ewa (author) / Sondor, Jozef (author) / Balin, Katarzyna (author) / Kubacki, Jerzy (author)

1. PDF document (2849 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Investigation of the static icing property for super-hydrophobic coatings on aluminium

Contibutors: Jin, Hai Yun (author) / Nie, Shi Chao (author) / Li, Yu Feng (author) / Xu Feng, Tian (author) / Zhang, Peng (author) / Li, Wen (author)

Mechanical properties of CrN/Cr coatings with different thicknesses

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (887 kB)

1. TXT document (40 kB)

Contibutors: Čekada, Miha (author) / Panjan, Peter (author) / Kek-Merl, Darja (author) / Maček, Marijan (author)

Effects of technological parameters on the morphological, microstructural and mechanical behavior...

Numbering: 2003, volume 37, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

1. TXT document (17 kB)

Contibutors: Li, Wen (author) / Sheng, Lei (author) / Xia, Yuanhao (author) / Amirfazli, Alidad (author) / Lu, Yalin (author)

1. PDF document (3340 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Corrosion resistance of superhydrophilic and superhydrophobic TiOsub2/epoxy coatings on AISI 316L...

Contibutors: Kocijan, Aleksandra (author) / Conradi, Marjetka (author) / Donik, Črtomir (author)

1. PDF document (2244 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Molecular dynamics simulation of Ti-6Al-4V diffusion bonding behavior under different process par...

Contibutors: Liu, Xiaogang (author) / Xu, Lei (author) / Zhang, Sun (author)

1. PDF document (4917 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Večfunkcionalne nanokompozitne prevleke in premazi

Contibutors: Orel, Boris [2565] (project leader)

Duration: 2012 2009/04 05

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (1123 kB)

1. TXT document (45 kB)

The influence of the platinum substrate roughness on the ferroelectric properties of 0.65Pb(Mgsub...

Contibutors: Uršič, Hana (author) / Tchernychova, Elena (author) / Benčan, Andreja (author) / Jouin, Jenny (author) / Holc, Janez (author) / Drnovšek, Silvo (author) / Hrovat, Marko (author) / Malič, Barbara (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1313 kB)

The selection and development of tribological coatings

Contibutors: Kharlamov, Yuriy (author) / Dal, Vladimir (author) / Mamuzić, Ilija (author) / Lopata, Larysa (author) / Pisarenko, Georgij Stepanovič (author)

Numbering: 2010, volume 44, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (144 kB)

Barvne, absorpcijske in zaščitne nanoplastne prevleke za aluminijeve zlitine

Nova asvaltna prevleka

Source: Javna tribuna (Ljubljana-Šiška)

Numbering: July 1977, volume 17, issue 143

Provider: Mestna knjižnica Ljubljana

1. PDF document (400 kB)

1. TXT document (1 kB)

Contibutors: Panjan, Peter [09090] (project leader)

Duration: 2014 2011/06 07

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (761 kB)

1. TXT document (66 kB)

Tribology of CrAg7N coatings deposited on Vanadis 6 ledeburitic tool steel

Contibutors: Bílek, Pavel (author) / Jurči, Peter (author) / Hudáková, Mária (author) / Čaplovič, L'ubomír (author) / Novák, Michal (author)

1. PDF document (2594 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Wear mechanisms and surface engineering of forming tools

Contibutors: Podgornik, Bojan (author) / Leskovšek, Vojteh (author)

1. PDF document (1242 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Effect of the abrasive grit size on the wear behavior of ceramic coatings during a micro-abrasion...

Contibutors: Korkut, Mehmet Horik (author) / Küçük, Yilmaz (author) / Karaoglanli, Abdullah Cahit (author) / Erdogan, Azmi (author) / Er, Yusuf (author) / Gök, Mustafa Sabri (author)

1. PDF document (1586 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Karakterizacija krom-nitridne prevleke, nanesene na nerjavno jeklo s postopkom IBAD

Contibutors: Zalar, Anton (author) / Kovač, Janez (author) / Praček, Borut (author) / Kunert, Maik (author)

Source: Vakuumist

Numbering: 1999, volume 19, issue 1

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (1979 kB)

Investigation of ironing process depending on applied tool materials and coatings

Contibutors: Adamović, Dragan (author) / Mandić, Vesna (author) / Terčelj, Milan (author) / Stefanović, Milentije (author) / Živković, Miroslav (author)

Source: RMZ-materials and geoenvironment

Numbering: 2012, volume 59, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (2046 kB)

Effects of an Alsub2Osub3 nano-additive on the performance of ceramic coatings prepared with micr...

Contibutors: Demirbaş, Çagatay (author) / Ayday, Aysun (author)

1. PDF document (1914 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (14 kB)

Microstructure and mechanical properties of wire arc additive-manufacturing high-carbon chromium ...

Contibutors: Zhang, Wenjie (author) / Lei, Weining (author) / Zhang, Yang (author) / Liu, Xiao (author)

1. PDF document (3780 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Corrosion resistance of as-plated and heat-treated electroless dublex Ni-P/Ni-B-W coatings

Contibutors: Yüksel, Behiye (author) / Erdogan, Garip (author) / Baştan, Fatih Erdem (author) / Yildiz, Ahmet (author)

1. PDF document (1369 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Characterization of multilayer PACVD TiN/Ti(B-N)/TiB2 coatings for hot-worked tool steels using e...

Contibutors: Jenko, Monika (author) / Mandrino, Djordje (author) / Godec, Matjaž (author) / Grant, John T. (author) / Leskovšek, Vojteh (author)

Effects of Dy3+-doping on the thermophysical properties of Ba2YbAlO5 ceramics

Numbering: 2008, volume 42, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (338 kB)

1. TXT document (22 kB)

Contibutors: Liu, Ling (author) / Zheng, Wei (author) / Zhang, Zhouwei (author) / Ma, Zhuang (author)

Influence of the substrate hardness and fracture toughness on the dynamic wear properties of coat...

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (876 kB)

1. TXT document (17 kB)

Contibutors: Sedlaček, Marko (author) / Šetina, Barbara (author) / Česnik, Damir (author) / Podgornik, Bojan (author)

1. PDF document (2978 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Preskušanje orodij, zaščitenih z različnimi površinskimi obdelavami, pri pogojih toplega preoblik...

Contibutors: Urankar, Igor (author) / Panjan, Peter (author) / Terčelj, Milan (author) / Turk, Radomir (author) / Čekada, Miha (author) / Navinšek, Boris (author)

Numbering: 2003, volume 37, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (558 kB)

Corrosion of CrN-coated stainless steel in a NaCl solution (w =3%)

Contibutors: Kucuk, Israfil (author) / Sarioglu, Cevat (author)

1. PDF document (1798 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Možnosti nadomeščanja elektrokemijskih postopkov nanašanja tankih zaščitnih prevlek z ekološko ne...

Contibutors: Panjan, Peter (author) / Navinšek, Boris (author)

Source: Vakuumist

Numbering: 1997, volume 17, issue 4

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (2474 kB)

1. PDF document (1572 kB)

Trde zaščitne prevleke

Contibutors: Panjan, Peter (author) / Navinšek, Boris (author) / Žabkar, Anton (author) / Cvelbar, Andrej (author)

Source: Vakuumist

Numbering: 1994, volume 14

Provider: Društvo za vakuumsko tehniko Slovenije

1. TXT document (16 kB)

Influence of oil additives on the performance of DLC coatings

Contibutors: Podgornik, Bojan (author) / Jacobson, Staffan (author) / Hogmark, Sture (author)

Pitting corrosion of TiN-coated stainless steel in 3 % NaCl solution

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (465 kB)

1. TXT document (49 kB)

Contibutors: Kucuk, Israfil (author) / Sarioglu, Cevat (author)

1. PDF document (1014 kB)

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Hidrotermalna sinteza močno vezanih prevlek fotokatalitičnega TiO2 na kovinskih podlagah

Contibutors: Dražić, Goran [02556] (project leader)

Duration: 2014 2011/06 07

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (605 kB)

1. TXT document (71 kB)

Characterization of hard Ti-W-N films deposited by reactive d.c. magnetron sputtering

Contibutors: Shaginyan, Leonid R. (author) / Mišina, Martin (author) / Musil, Jindřich (author) / Regent, Filip (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (163 kB)

Kvaliteta navarjenih korozijsko obstojnih prevlek na konstrukcijskem jeklu

Contibutors: Kejžar, Rajko (author) / Lagoja, Aleš (author)

Novaasfaltna prevleka zaTitovo cesto

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (219 kB)

1. TXT document (17 kB)

Contibutors: IVAN ŠUČUR (undetermined function)

Source: Zbor občanov

Numbering: 1985, volume 25, issue 2

Provider: Mestna knjižnica Ljubljana

1. PDF document (446 kB)

1. TXT document (2 kB)

Photon-beam sputtering and surface morphology of titanium-ceramic coatings

Contibutors: Gaković, Biljana (author) / Trtica, Milan (author) / Rakočević, Zlatko (author) / Petrović, Suzana (author) / Nenadović, Tomislav (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (236 kB)

AES karakterizacija poroznosti tankih Au prevlek na kontaktih za miniaturne releje (1995, volume 29, issue 1/2)

Contibutors: Koller, Lidija (author) / Spruk, Sonja (author) / Railič, Drago (author)

Razvoj fotokatalitskih prevlek in plinskih fotoreaktorjev za določanje učinkovitosti prevlek pri čiščenju zraka in samočiščenju

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (495 kB)

1. TXT document (12 kB)

Contibutors: Lavrenčič Štangar, Urška [11873] (project leader)

Duration: 2011 2008/01 02

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (501 kB)

1. TXT document (58 kB)

Uporaba naparjenih kovin za polprepustna zrcala za avtomobilsko smerno svetilko

Contibutors: Tasevski, Milan (author) / Požun, Karol (author)

Raziskave fazne meje med bio-mimetično pripravljeno kalcij fosfatno prevleko in keramiko Al2O3 ali ZrO2

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (544 kB)

1. TXT document (11 kB)

Contibutors: Pribošič, Irena [Šif. raz.: 19990] (project leader)

Duration: 05.2009/04.2011

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (252 kB)

Electroless Ni-B-W coatings for improving hardness, wear and corrosion resistance

Contibutors: Aydeniz, Ali Imre (author) / Göksenli, Ali (author) / Dil, Gökce (author) / Muhaffel, Faiz (author) / Calli, Cagdas (author) / Yüksel, Behiye (author)

1. PDF document (1210 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (2211 kB)

Kovinska prevleka s cinkom

Contibutors: Stocca, Bogdan (author)

Source: Železarski zbornik

Numbering: 1970, volume 4, issue 2

Provider: Narodna in univerzitetna knjižnica

1. TXT document (42 kB)

Oplemenitenje orodij za stiskanje kovinskih prahov

Contibutors: Torkar, Matjaž (author) / Leskovšek, Vojteh (author) / Šuštaršič, Borivoj (author) / Navinšek, Boris (author) / Bračko, Branko (author)

Characterization of defects in PVD TiAlN hard coatings

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (258 kB)

1. TXT document (13 kB)

Contibutors: Gselman, Peter (author) / Bončina, Tonica (author) / Zupanič, Franc (author) / Panjan, Peter (author) / Kek-Merl, Darja (author) / Čekada, Miha (author)

Elektrokemijske in površinsko analitične raziskave trdih nitridnih prevlek

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (717 kB)

1. TXT document (14 kB)

Contibutors: Milošev, Ingrid (author)

Source: Vakuumist

Numbering: 1997, volume 17, issue 4

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (3058 kB)

The influence of surface coatings on the tooth tip deflection of polymer gears

Contibutors: Trobentar, Boštjan (author) / Glodež, Srečko (author) / Flašker, Jože (author) / Zafošnik, Boštjan (author)

Investigation of a tool and workpiece machined using a nickel-nanocoated insert

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (580 kB)

1. TXT document (29 kB)

Contibutors: Manoj, Sureshkumar (author) / Gandhi, Veeramalai Chinnasamy Sathish (author)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (657 kB)

Vakuumsko razplinjevanje tankih zaščitnih prevlek na kontaktnem materialu AgNi0,15

Contibutors: Koller, Lidija (author) / Bizjak, Martin (author) / Požun, Karol (author) / Praček, Borut (author)

Uporaba trdih prevlek PVD v strojništvu - možnosti in omejitve

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (374 kB)

1. TXT document (13 kB)

Contibutors: Podgornik, Bojan (author) / Vižintin, Jože (author)

1. PDF document (1035 kB)

Numbering: 2003, volume 49, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Comparison of microstructures and oxidation behaviors of ytria and magnesia stabilized zirconia t...

Contibutors: Doleker, Kadir Mert (author) / Ozgurluk, Yasin (author) / Ozkan, Dervis (author) / Mesekiran, Nihal (author) / Karaoglanli, Abdullah Cahit (author)

1. PDF document (3300 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Netokovno nanašanje prevlek Ni-P na Al in zlitine

Contibutors: Jerič, Smiljan (author) / Kocmur, Miha (author)

Source: Vakuumist

Numbering: 1992, issue 27

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (842 kB)

1. TXT document (15 kB)

Spektralno selektivne površine za sončne zbiralnike in sončne fasade zgradb

Contibutors: Surca, Angelja Kjara (author) / Vince, Jelica (author) / Opara Krašovec, Urša (author) / Orel, Boris (author) / Köhl, Michael (author)

Source: Vakuumist

Numbering: 2001, volume 21, issue 1

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (3838 kB)

Wear mechanism of duplex-coated P/M vanadis 6 ledeburitic steel

Contibutors: Jurči, Peter (author) / Hudáková, Mária (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (397 kB)

Enhanced corrosion resistance of a chromium-free conversion/organic composite coating on an AZ91D...

Contibutors: Geng, Guihong (author) / Wang, Dongxin (author) / Zhang, Lei (author) / Chen, Weiye (author) / Yan, Zhijie (author) / Liu, Guiqun (author)

Tribocorrosion degradation of protective coatings on stainless steel

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (896 kB)

1. TXT document (29 kB)

Contibutors: Kek-Merl, Darja (author) / Panjan, Peter (author) / Čekada, Miha (author) / Gselman, Peter (author) / Paskvale, Srečko (author)

1. PDF document (1108 kB)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Multifunkcionalne nanostrukturne prevleke za umetne vsadke - korozijski in tribokorozijski procesi

Contibutors: Kek Merl, Darinka [12616] (project leader)

Duration: 2014 2011/06 07

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (443 kB)

1. TXT document (49 kB)

Razvoj nove generacije trdih prevlek s pulznim naprševanjem

Contibutors: Panjan, Peter [9090] (project leader)

Duration: 2012 2009/04 05

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (1000 kB)

1. TXT document (64 kB)

Raman investigation of sol-gel anticorrosion coatings on electronic boards

Contibutors: Šurca Vuk, Angela (author) / Rauter, Aleksander (author) / Koželj, Matjaž (author) / Slemenik Perše, Lidija (author) / Orel, Boris (author) / Bengű, Başak (author) / Sunetci, Onder (author)

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (364 kB)

Simulation of multilayer coating growth in an industrial magnetron sputtering system

Contibutors: Panjan, Matjaž (author) / Čekada, Miha (author) / Panjan, Peter (author)

Source: RMZ-materials and geoenvironment

Numbering: 2010, volume 57, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (669 kB)

Razvoj postopkov in naprav za uporabo pri suhem obdelovanju

Contibutors: Kulekci, Mustafa Kemal (author)

Numbering: 2007, volume 53, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (214 kB)

Sol-gel-derived thin ceramic CoAl2O4 coatings for optical applications

Contibutors: Lavrenčič Štangar, Urška (author) / Orel, Boris (author) / Krajnc, Matjaž (author) / Cerc Korošec, Romana (author) / Bukovec, Peter (author)

Mechanical and wetting properties of nanosilica/epoxy-coated stainless steel

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (528 kB)

1. TXT document (34 kB)

Contibutors: Conradi, Marjetka (author) / Intihar, Gaber (author) / Zorko, Milena (author)

1. PDF document (1043 kB)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Wear-resistant intermetallic arc spray coatings

Contibutors: Altuncu, Ekrem (author) / Iriç, Sedat (author) / Ustel, Fatih (author)

Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed Co...

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (317 kB)

1. TXT document (11 kB)

Contibutors: Krajňáková, Petra (author) / Gouvea, Larissa (author) / Čupera, Jan (author) / Jan, Vít (author) / Dlouhý, Ivo (author) / Spotz, Zdeněk (author)

1. PDF document (2438 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (4323 kB)

Korozija materialov

Contibutors: Milošev, Ingrid (author)

Source: Vakuumist

Numbering: 1994, volume 14, issue 1

Provider: Društvo za vakuumsko tehniko Slovenije

1. TXT document (37 kB)

Process factors affecting deposition rate of TiN coating on a machine component

Contibutors: Saikaew, Charnnarong (author)

1. PDF document (1354 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Mehanizmi in formiranje triboloških nano plasti pri mejnem mazanju DLC prevlek

Contibutors: Mitjan Kalin [Šif. raz.: 14556] (project leader)

Duration: 01.2007/12.2009

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (249 kB)

1. TXT document (44 kB)

Korozija in zaščita cinkove prevleke

Contibutors: Stocca, Bogdan (author)

Source: Železarski zbornik

Numbering: 1971, volume 5, issue 1

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1705 kB)

1. TXT document (38 kB)

Novosti na področju inženirstva površine izdelkov in polizdelkov iz aluminijevih zlitin

Contibutors: Kevorkijan, Varužan (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (56 kB)

Laser cladding in the use effects on nitrided and PVD coated steels used for die-casting using va...

Contibutors: Bombač, David (author) / Fazarinc, Matevž (author) / Pleterski, Matej (author) / Tušek, Janez (author) / Muhič, Tadej (author)

Source: RMZ-materials and geoenvironment

Numbering: 2009, volume 56, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (1622 kB)

1. TXT document (22 kB)

The effect of the cutting speed on the cutting forces and surface finish when milling chromium 21...

Contibutors: Altin, Abdullah (author)

1. PDF document (1030 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A study of the microstructures and performance of chromium boride coatings on AISI 52100 steel

Contibutors: Zong, Xiaoming (author) / Jiang, Wenming (author) / Fan, Zitian (author)

1. PDF document (3037 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

The performance and mechanisms of DLC-coated surfaces in contact with steel in boundary-lubricati...

Contibutors: Velkavrh, Igor (author) / Kalin, Mitjan (author) / Vižintin, Jože (author)

1. PDF document (1177 kB)

Numbering: 2008, volume 54, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (60 kB)

Theoretical and experimental estimation of the working life of machine parts hard faced with aust...

Contibutors: Lazić, Vukić (author) / Sedmak, Aleksander (author) / Milosavljević, Dragan (author) / Nikolić, Ilija (author) / Aleksandrović, Srbislav (author) / Nikolić, Ružica (author) / Mutavdžić, Milan (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (539 kB)

Study of the microstructure and oxidation behavior of YSZ and YSZ/Al2O3 TBCs with HVOF bond coatings

Contibutors: Karaoglanh, Abdullah Cahit (author) / Erdogan, Garip (author) / Kahraman, Yaşar (author) / Türk, Ahmet (author) / Üstel, Fatih (author) / Özdemir, Ismail (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (313 kB)

Deposition and characterization of Tisub(0.5) Alsub(0.5)N/CrN multilayer coatings sputtered at lo...

Trde zaščitne prevleke

Contibutors: Panjan, Peter (author) / Navinšek, Boris (author) / Žabkar, Anton (author)

Source: Vakuumist

Numbering: 1993, volume 13, issue 4

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (758 kB)

1. TXT document (13 kB)

Contibutors: Panjan, Peter (author) / Čekada, Miha (author) / Kek-Merl, Darja (author) / Urankar, Igor (author) / Zalar, Anton (author)