Digitalna knjižnica Slovenije

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

Metalografska preiskava in korozijska odpornost zvarov feritnega nerjavnega jekla

Contibutors: Torkar, Matjaž (author) / Kocijan, Aleksandra (author) / Celin, Roman (author) / Burja, Jaka (author) / Podgornik, Bojan (author)

1. PDF document (3359 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A crack growth analysis in critical structural components

Contibutors: Semenski, Damir (author) / Božić, Željko (author) / Wolf, Hinko (author)

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (300 kB)

Raziskave cevi uparjalnika

Contibutors: Vojvodič-Tuma, Jelena (author) / Korošec, Darko (author) / Gudek, K. (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

Quantitative analysis of fatigue fracture surface in the duplex steel

Contibutors: Sozańska, Maria (author) / Iacoviello, Francesco (author) / Cwajna, Jan (author) / Jerome, Michel (author) / Sojka, Jaroslav (author) / Galland, Jacques (author)

Numbering: 2002, volume 21, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (430 kB)

Laser cladding of Ti-6Al-4V alloy with vanadium carbide particles

Contibutors: El-Labban, H. F. (author) / Mahmoud, E. R. I. (author) / Al-Wadai, H. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1961 kB)

Mehanske lastnosti spajkanih spojev (1997, volume 31, issue 5)

Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (797 kB)

Numerical simulation of the progressive damage to FRC panels due to shock loading

Contibutors: Zemčík, Robert (author) / Laš, Vladislav (author)

Numbering: 2005, volume 39, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

A metallographic examination of a fractured connecting rod

Contibutors: Celin, Roman (author) / Arzenšek, Boris (author) / Kmetič, Dimitrij (author)

3D morphological modelling of a random fibrous network

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (288 kB)

1. TXT document (10 kB)

Contibutors: Peyrega, Charles (author) / Jeulin, Dominique (author) / Delisée, Christine (author) / Malvestio, Jérôme (author)

1. PDF document (1950 kB)

Numbering: 2009, volume 28, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

HR AES and XPS investigations of Fe-Si-B powders

Contibutors: Mandrino, Djordje (author) / Godec, Matjaž (author) / Jenko, Monika (author) / Prešern, Vasilij (author)

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Investigation of the adhesion and wear properties of borided AISI H10 steel

Contibutors: Gunes, Ibrahim (author) / Ozcatal, Melih (author)

1. PDF document (2407 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Armirani spajkani spoji povečane žilavosti (1997, volume 31, issue 5)

Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (873 kB)

Image analysis for modelling shear behaviour

Contibutors: Lopez, Philippe (author) / Riss, Joëlle (author) / Gentier, Sylvie (author) / Flamand, Rock (author) / Archambault, Guy (author) / Bouvet, Soizic (author)

Investigation of the freeze-thaw resistance of eco-porous concrete containing fly ash

Numbering: 2000, volume 19, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (240 kB)

1. TXT document (19 kB)

Contibutors: Zhang, Gui (author) / Yin, Jian (author) / Sheng, Li (author) / Sang, Zhenghui (author) / Xiong, Yao (author) / Gao, Ting (author) / Hu, Xiongwei (author)

1. PDF document (1156 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

On the different nature of time-dependent and time-independent irreversible deformation

Contibutors: Getsov, Leonid Borisovich (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (172 kB)

Izračun parametrov Weibullove porazdelitve za oceno upogibne trdnosti valovitih strešnih plošč

Contibutors: Ambrožič, Milan (author) / Vidović, Krunoslav (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (147 kB)

Investigations of carbide precipitates in modified 9% Cr steel using different electron spectrosc...

Contibutors: Nagode, Aleš (author) / Godec, Matjaž (author) / Kosec, Gorazd (author) / Kosec, Ladislav (author)

Numbering: 2011, volume 58, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (765 kB)

Predictive analysis of criterial yield during travelling wire electrochemical discharge machining...

Contibutors: Mitra, N. S. (author) / Doloi, B. (author) / Bhattacharyya, B. (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (643 kB)

1. TXT document (39 kB)

Obraba na členih elevatorske verige

Contibutors: Legat, Franc (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (188 kB)

A nondestructive experimental determination of the heat flux during cooling of direct-chill cast ...

Contibutors: Založnik, Miha (author) / Bajsič, Ivan (author) / Šarler, Božidar (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (277 kB)

Integrated geophysical and geotechnical investigation of the failed portion of a road in basement...

Contibutors: Osinowo, O. O. (author) / Akanji, A. Olusoji (author) / Akinmosin, Adewale (author)

Izvajanje eksperimentov na preizkušancih iz lesa pri predmetu KID na FA

Numbering: 2011, volume 58, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (903 kB)

1. TXT document (34 kB)

Contibutors: Wallner, Edo (author) / Slivnik, Lara (author) / Križaj, Eva (author)

Source: AR. Arhitektura, raziskave

Numbering: 2006, volume 6, issue 1

Provider: Univerza v Ljubljani, Fakulteta za arhitekturo
(Obvezni izvod spletne publikacije)

1. PDF document (92 kB)

1. TXT document (9 kB)

Effect of isothermal annealing on the magnetic properties of cold-rolled low-carbon steel with ma...

Contibutors: Ansaripour, Amir (author) / Zadeh, Hossein Monajati (author) / Amighian, Jamshid (author)

1. PDF document (1669 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Segmentation and grain size of ceramics

Contibutors: Arnould, Xavier (author) / Coster, Michel (author) / Chermant, Jean-Louis (author) / Chermant, Liliane (author) / Chartier, Thierry (author) / Elmoataz, Abder (author)

Numbering: 2001, volume 20, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (209 kB)

A new high resolution optical method for obtaining the topography of fracture surfaces in rocks

Contibutors: Ogilvie, Steven (author) / Isakov, Evgeny (author) / Taylor, Colin (author) / Glover, Paul (author)

1. PDF document (1281 kB)

Numbering: 2002, volume 21, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

Microstructure evaluation of an NRC-processed automotive component

Contibutors: Torkar, Matjaž (author) / Breskvar, Bojan (author) / Godec, Matjaž (author) / Giordano, Paola (author) / Chiarmetta, Gianluigi (author)

1. PDF document (1773 kB)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Growth of K2subCO3sub-doped KDP Crystal from an aqueous solution and an investigation of its phys...

Contibutors: Rousta, Abrisham (author) / Dizaji, Hamid Rezagholipour (author)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (416 kB)

Investigation of hole effects on the critical buckling load of laminated composite plates

Contibutors: Kurşun, Ali (author) / Topal, Ersin (author)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (766 kB)

Investigation of the static icing property for super-hydrophobic coatings on aluminium

Contibutors: Jin, Hai Yun (author) / Nie, Shi Chao (author) / Li, Yu Feng (author) / Xu Feng, Tian (author) / Zhang, Peng (author) / Li, Wen (author)

Characteristics of creep in conditions of long operation

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (887 kB)

1. TXT document (40 kB)

Contibutors: Katanaha, Nikolay A. (author) / Getsov, Leonid (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (790 kB)

Non-traditional non-destructive testing of the alkali-activated slag mortar during the hardening

Contibutors: Topolar, Libor (author) / Rypák, Peter (author) / Timčaková-Šamárková, Kristýna (author) / Pazdera, Luboš (author) / Rovnaník, Pavel (author)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (733 kB)

A fatigue characterization of honeycomb sandwich panels with a defect

Contibutors: Keskes, Boualem (author) / Menger, Yves (author) / Abbadi, Ahmed (author) / Gilgert, Joseph (author) / Bouaouadja, Nourredine (author) / Azari, Zitouni (author)

Corrosion of the refractory zirconia metering nozzle due to molten steel and slag

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (491 kB)

1. TXT document (19 kB)

Contibutors: Wiśniewska, Klaudia (author) / Madej, Dominika (author) / Szczerba, Jacek (author)

1. PDF document (1415 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of the cooling process with nanofluids according to ISO 9950 and ASTM D 6482 standards

Contibutors: Župan, Josip (author) / Landek, Darko (author) / Filetin, Tomislav (author)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (637 kB)

On the sampling of serial sectioning technique for three dimensional space-filling grain structures

Contibutors: Liu, Guoquan (author) / Yu, Haibo (author)

The action of a laser on an aluminium target

Numbering: 2000, volume 19, issue 2

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (85 kB)

1. TXT document (12 kB)

Contibutors: Henč-Bartolič, Višnja (author) / Bončina, Tonica (author) / Jakovljević, Suzana (author) / Pipić, Davor (author) / Zupanič, Franc (author)

Preiskava tankih večplastnih kovinskih struktur v področju ohmskega kontakta tranzistorja z metod...

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (323 kB)

1. TXT document (17 kB)

Contibutors: Praček, Borut (author)

Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (568 kB)

1. TXT document (10 kB)

Contibutors: Çelik, Yahya Hişman (author)

1. PDF document (1441 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

TEM investigation of metallic materials - an advanced technique in materials science and metallurgy

Contibutors: Jenko, Darja (author)

Numbering: 2011, volume 45, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (865 kB)

Keramični materiali za 3 D strukture in preiskave funkcionalnih lastnosti

Contibutors: Holc, Janez [6423] (project leader)

Duration: 2012 2009/04 05

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (468 kB)

1. TXT document (50 kB)

Flaw acceptability assessment detected in HSLA steel weld joints

Contibutors: Rak, Inoslav (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (341 kB)

Osseointegration and rejection of a titanium screw

Contibutors: Klančnik, Grega (author) / Zdovc, Miro (author) / Kovšca, Uroš (author) / Praček, Borut (author) / Kovač, Janez (author) / Rozman, Janez (author)

Numbering: 2010, volume 44, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (972 kB)

Analiza elektrokemijskega šuma, generiranega z različnimi korozijskimi procesi

Contibutors: Bajt Leban, Mirjam (author) / Doleček, Valter (author) / Legat, Andraž (author) / Kuhar, Viljem (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

Ugotavljanje poškodb vrvnih prižemk in analiza vzrokov njihovega nastanka

Contibutors: Bajt, Žiga (author) / Kuhar, Viljem (author) / Legat, Andraž (author) / Bajt Leban, Mirjam (author) / Gomboc, Janez (author)

Numbering: 2001, volume 35, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (127 kB)

Investigation of ironing process depending on applied tool materials and coatings

Contibutors: Adamović, Dragan (author) / Mandić, Vesna (author) / Terčelj, Milan (author) / Stefanović, Milentije (author) / Živković, Miroslav (author)

1. PDF document (2046 kB)

Numbering: 2012, volume 59, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

On the determination of safety factors for machines using finite element computations

Contibutors: Getsov, Leonid (author) / Margolin, B. Z. (author) / Fedorchenko, D. G. (author)

Rezultati preiskav fizikalnih lastnosti vzorcev iz lesa

Numbering: 2008, volume 42, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (98 kB)

1. TXT document (28 kB)

Contibutors: Wallner, Edo (author) / Slivnik, Lara (author) / Križaj, Eva (author)

Source: AR. Arhitektura, raziskave

Numbering: 2006, volume 6, issue 1

Provider: Univerza v Ljubljani, Fakulteta za arhitekturo
(Obvezni izvod spletne publikacije)

1. PDF document (203 kB)

1. TXT document (28 kB)

Tehnologija laserskega sintranja za hitro izdelavo prototipov in orodij

Contibutors: Dolinšek, Slavko (author)

Source: Vakuumist

Numbering: 2002, volume 22, issue 4

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (2107 kB)

Investigation studies involving wear-resistant ALD/PVD hybrid coatings on sintered tool substrates

Contibutors: Staszuk, Marcin (author) / Pakula, Daniel (author) / Tański, Tomasz (author)

1. PDF document (2608 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Pojavi na talilnem elementu varovalke v talilni fazi izklopa

Contibutors: Bizjak, Martin (author) / Kovač, Janez (author) / Koprivšek, Mitja (author)

Numbering: 2004, volume 38, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (292 kB)

Numerical and experimental investigation of the effect of hydrostatic pressure on the residual st...

Contibutors: Danyali, Daryoush (author) / Ranjbarnodeh, Eslam (author)

1. PDF document (1403 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Poškodbe na parovodih iz jekla 14 MoV 6 3

Contibutors: Kmetič, Dimitrij (author) / Vojvodič-Tuma, Jelena (author) / Arzenšek, Boris (author) / Dvoršek, Matjaž (author) / Lenart, Jože (author)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (441 kB)

Investigation of the geometrical accuracy and thickness distribution using 3d laser scanning of A...

Contibutors: Bayram, Halil (author) / Köksal, Nurullah Sinan (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (816 kB)

Identification and verification of the composite material parameters for the Ladeveze damage model

Contibutors: Kleisner, Václav (author) / Zemčík, Robert (author) / Kroupa, Tomáš (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (457 kB)

Experimental study of some masonry-wall coursework material types under horizontal loads and thei...

Contibutors: Kamanli, Mehmet (author) / Donduren, Mahmet Sami (author) / Cogurcu, Mustafa Tolga (author) / Altin, Mustafa (author)

Numbering: 2011, volume 45, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (812 kB)

Revitalizacija zunanjega okrova visokotlačnega dela turbine 125 MW

Contibutors: Kmetič, Dimitrij (author) / Kurent, Vinko (author) / Matko, Ludvik (author) / Dobosiewicz, Jerzy (author) / Arzenšek, Boris (author) / Celin, Roman (author)

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (408 kB)

Developing and testing a new type-8K mould for tool-steel ingot casting

Contibutors: Balcar, Martin (author) / Sochor, Libor (author) / Železný, Rudolf (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Kraus, Libor (author) / Kešner, Dušan (author) / Bažan, Jiří (author)

Numbering: 2008, volume 42, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (387 kB)

Shape characterization of concrete aggregate

Contibutors: Hu, Jing (author) / Stroeven, Piet (author)

Physical regularities in the cracking of nanocoatings and a method for an automated determination...

Numbering: 2006, volume 25, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (801 kB)

1. TXT document (42 kB)

Contibutors: Maruščak, P. O. (author) / Gliha, Vladimir (author) / Konovalenko, Igor (author) / Vuherer, Tomaž (author) / Panin, Sergey (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

Characterization of multilayer PACVD TiN/Ti(B-N)/TiB2 coatings for hot-worked tool steels using e...

Contibutors: Jenko, Monika (author) / Mandrino, Djordje (author) / Godec, Matjaž (author) / Grant, John T. (author) / Leskovšek, Vojteh (author)

Numbering: 2008, volume 42, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (338 kB)

Determination of the metal concentrations in an anode material for solid-oxide fuel cells

Contibutors: Skalar, Tina (author) / Golobič, Amalija (author) / Marinšek, Marjan (author) / Maček, Jadran (author)

Analysis of the process of crystallization of continuous cast special brass alloys with the acous...

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (509 kB)

1. TXT document (33 kB)

Contibutors: Tasić, Miloš (author) / Anđić, Zoran (author) / Vujović, A ... (author) / Jovanić, Predrag (author)

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (842 kB)

Razvoj in preiskava domačih kompleksnih cepiv za sivo litino z lamelastim grafitom

Contibutors: Uršič, Vito (author) / Surina, I. (author) / Semenič, S. (author) / Tonkovič-Prijanovič, Marica (author)

Small-punch testing of a weld´s heat-affected zones

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (598 kB)

1. TXT document (12 kB)

Contibutors: Šturm, Roman (author) / Li, Yingzhi (author)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (555 kB)

Surface roughness assessing based on digital image features

Contibutors: Šimunović, Goran (author) / Svalina, I. (author) / Simunovic, K. (author) / Šarić, Tomislav (author) / Havrlisan, S. (author) / Vukelić, Djordje (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1425 kB)

1. TXT document (41 kB)

Surveying for geophysical exploration, using a single-frequency global navigation satellite syste...

Contibutors: Dimc, Franc (author) / Mušič, Branko (author) / Osredkar, Radko (author)

1. PDF document (1498 kB)

Numbering: 2008, volume 55, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Impedance measurement and computation for the steam- generator tube integrity using the ECNDT tec...

Contibutors: Chebout, Mohammed (author)

Source: Elektrotehniški vestnik

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (837 kB)

Durability evaluation of some Slovenian building limestones

Contibutors: Kramar, Sabina (author) / Mladenovič, Ana (author) / Kozamernik, Mitja (author) / Mirtič, Breda (author)

Uporaba petrofizikalnih preiskav pri oceni obstojnosti in stopnji preperevanja naravnega kamna

Numbering: 2010, volume 57, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (592 kB)

1. TXT document (35 kB)

Contibutors: Kramar, Sabina (author) / Mirtič, Breda (author)

Fatigue properties of a high-strength-steel welded joint

Numbering: 2006, volume 53, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (791 kB)

1. TXT document (38 kB)

Contibutors: Burzić, Zijah (author) / Grabulov, Vencislav (author) / Sedmak, Stojan (author) / Sedmak, Aleksander (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

Preiskave horizontalne stabilne tlačne posode za skladiščenje utekočinjenega naftega plina (1996, volume 30, issue 1/2)

Contibutors: Vojvodič-Tuma, Jelena (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (779 kB)

Nano-indentation investigations of the mechanical properties of thin TiOsub2, WOsub3 and their co...

Contibutors: Cherneva, Sabina (author) / Iankov, Roumen (author) / Radic, Nenad (author) / Stoychev, Dimitar (author) / Datcheva, Maria (author)

Compatibility of ionic liquids with hydraulic system components

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (844 kB)

1. TXT document (50 kB)

Contibutors: Kambič, Milan (author) / Kalb, Roland (author) / Tič, Vito (author) / Lovrec, Darko (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (3510 kB)

1. TXT document (39 kB)

Investigation of the effect of skin-pass rolling on the formability of low-carbon steel sheets

Contibutors: Monajatizadeh, Hussein (author) / Asefi, Davoud (author) / Ansaripour, Amir (author) / Salimi, Ahmadreza (author)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (265 kB)

Experimental evaluation of stereological methods for determining 3D grain size and topological di...

Contibutors: Liu, Guoquan (author) / Yu, Haibo (author)

Numbering: 2000, volume 19, issue 2

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (102 kB)

Preiskave površine katod iz ionske črpalke

Contibutors: Mozetič, Miran (author) / Praček, Borut (author) / Pregelj, Andrej (author) / Zorko, Benjamin (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (181 kB)

An AES investigation of brushed AISI 304 stainless steel after corrosion testing

Contibutors: Torkar, Matjaž (author) / Mandrino, Djordje (author) / Lamut, Martin (author)

Numbering: 2008, volume 42, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (297 kB)

Investigation of the effect of holding time and melt stirring on the grain refinement of an A206 ...

Contibutors: Akar, Neset (author) / Tanyel, Ziya (author) / Kocatepe, Kadir (author) / Kayikci, Ramazan (author)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (657 kB)

Preiskava železo-oksidnih magnetnih prahov z metodo AES (1995, volume 29, issue 1/2)

Contibutors: Zupan, Klementina (author) / Zalar, Anton (author) / Praček, Borut (author)

Makroskopski modeli dvofaznih materialov

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (349 kB)

1. TXT document (9 kB)

Contibutors: Kosec, Borut (author) / Kosel, Franc (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (154 kB)

Spectroscopic and porosimetric analyses of Roman pottery from an archaeological site near Mošnje,...

Contibutors: Kramar, Sabina (author) / Lux, Judita (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (852 kB)

Main damages on upper die in industrial hot forging

Contibutors: Lavtar, Lejla (author) / Terčelj, Milan (author) / Fazarinc, Matevž (author) / Kugler, Goran (author)

Numbering: 2010, volume 57, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (735 kB)

Influence of weld-process parameters on the material characterization of the friction-stir-welded...

Contibutors: Patil, Hiralal (author) / Soman, Sanjay (author)

1. PDF document (1876 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation on new creep- and oxidation-resistant materials

Contibutors: Khalaj, Omid (author) / Mašek, Bohuslav (author) / Jirková, Hana (author) / Ronešová, Andrea (author) / Svoboda, Jiří (author)

1. PDF document (5091 kB)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of wear behavior of borided AISI D6 steel

Contibutors: Gunes, Ibrahim (author) / Kanat, Salih (author)

1. PDF document (2409 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental analysis of the wear behavior of hybrid metal-matrix composites of LM25Al with equal...

Contibutors: Elango, Gopalakrishnan (author) / Raghunath, Busuna Kuppuswamy (author) / Palanikumar, Kayaroganam (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (891 kB)

The stability of cast alloys and CVD coatings in a simulated biomass-combustion atmosphere

Contibutors: Skobir Balantič, Danijela Anica (author) / Spiegel, Michael (author)

1. PDF document (1059 kB)

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mesh free estimation of the structure model index

Contibutors: Ohser, Joachim (author) / Redenbach, Claudia (author) / Schladitz, Katja (author)

Numbering: 2009, volume 28, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (736 kB)

Obrabna odpornost konstrukcijskega jekla, nitriranega v plazmi

Contibutors: Podgornik, Bojan (author) / Vižintin, Jože (author) / Leskovšek, Vojteh (author)

Source: Strojniški vestnik

Numbering: 2001, volume 47, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (655 kB)

1. TXT document (35 kB)

Strength properties and durability aspects of sintered-fly-ash lightweight aggregate concrete

Contibutors: Divyah, Nagarajan (author) / Thenmozhi, Rajagopal (author) / Neelamegam, Meyappan (author)

1. PDF document (1944 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Opredelitev mezofaz 4-{omega-bis(2-hidroksietil)aminoalkoksi}-4'-nitroazobenzenov in ustreznih po... (1997, volume 31, issue 1/2)

Contibutors: Brecl, Marko (author) / Malavašič, Tatjana (author)

1. PDF document (1050 kB)

Provider: Narodna in univerzitetna knjižnica

Structural, optical and electrical studies on Si-doped polymer electrolytes

Contibutors: Saxena, Amit (author) / Singh, Pramod Kumar (author) / Bhattacharya, Bhaskar (author)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (575 kB)

Investigating the properties of dental composites

Contibutors: Nagode, Aleš (author) / Zupančič, Katja (author) / Zorc, Matija (author) / Žužek, Borut (author) / Karpe, Blaž (author) / Šetina, Barbara (author) / Zorc, Borut (author) / Kosec, Borut (author) / Bizjak, Milan (author) / Pavlič, Alenka (author)

1. PDF document (1408 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Auto-shape analysis of image textures in fractography

Contibutors: Lauschmann, Hynek (author) / Nedbal, Ivan (author)

Investigation of grain boundaries in alloy 263 after special heat treatment

Numbering: 2002, volume 21, issue 2

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (466 kB)

1. TXT document (19 kB)

Contibutors: Slatkovský, Ivan (author) / Dománková, Mária (author) / Sahul, Martin (author)

1. PDF document (4910 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Preiskave metode za določanje majhnih množin inertnih plinov, generiranih med delovanjem nenaparljivih getrov v ultravisokem vakuumu (UVV) in ekstremnem visokem vakuumu (EVV)

Contibutors: Šetina, Janez [04254] (project leader)

Duration: 2011 2008/01 02

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (474 kB)

1. TXT document (52 kB)

Modificirano numerično modeliranje lomnega vedenja zvarnega spoja v prehodnem področju iz duktiln...

Contibutors: Kozak, Dražan (author) / Gubeljak, Nenad (author) / Rak, Inoslav (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (167 kB)

Geochemical evaluation of the Pan-African pegmatites from parts of Oban massif, Southeast Nigeria

Contibutors: Oden, M. I. (author) / Igonor, E. E. (author) / Ukwang, E. E. (author)

1. PDF document (2572 kB)

Numbering: 2013, volume 60, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Primerjava sočasnih meritev elektrokemijskega šuma in mehanskih parametrov med procesi napetostno...

Contibutors: Bajt Leban, Mirjam (author) / Doleček, Valter (author) / Legat, Andraž (author) / Kuhar, Viljem (author)

1. PDF document (1303 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)