Digitalna knjižnica Slovenije

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

Effect of the by-pass cement-kiln dust and fluidized-bed-combustion fly ash on the properties of ...

Contibutors: Bílek, Vlastimil (author) / Pařízek, Ladislav (author) / Kalina, Lukáš (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (65 kB)

Formation of Ni-Ti intermetallics during reactive sintering at 800-900 °C

Contibutors: Novák, Pavel (author) / Vladimír, Vojtěch (author) / Průša, Filip (author) / Pokorný, Petr (author) / Salvetr, Pavel (author) / Knaislová, Anna (author) / Nová, Kateřina (author)

1. PDF document (1498 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

HR AES and XPS investigations of Fe-Si-B powders

Contibutors: Mandrino, Djordje (author) / Godec, Matjaž (author) / Jenko, Monika (author) / Prešern, Vasilij (author)

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Plasma-enhanced chemical vapour deposition of octafluorocyclobutane onto carbonyl iron particles

Contibutors: Sedlacik, Michal (author) / Pavlinek, Vladimir (author) / Lehocký, Marián (author) / Junkar, Ita (author) / Vesel, Alenka (author)

Numbering: 2012, volume 46, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (296 kB)

Rheological properties of feedstocks and the structure of injection moulders for sintering compos...

Contibutors: Golombek, K. (author) / Matula, G. (author) / Stamenković, Dragomir (author) / Mikula, Jarosław (author) / Soković, Mirko (author)

1. PDF document (2745 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Raziskave postopka neposrednega laserskega sintranja

Contibutors: Dolinšek, Slavko (author)

Numbering: 2004, volume 50, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (931 kB)

Neutralization of waste filter dust with COsub2

Contibutors: Kračun, Ana (author) / Anžel, Ivan (author) / Fras Zemljič, Lidija (author) / Stergaršek, Andrej (author)

Properties and structure of Cu-Ti-Zr-Ni amorphous powders prepared by mechanical alloying

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (439 kB)

1. TXT document (23 kB)

Contibutors: Guwer, Aleksandra (author) / Nowosielski, Ryszard (author) / Lebuda, Anna (author)

1. PDF document (2071 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Synthesis of aluminium foams by the powder-metallurgy process

Contibutors: Paulin, Irena (author) / Šuštaršič, Borivoj (author) / Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Jenko, Monika (author)

Pickling of Ti-Al-Si alloy powders - a method for improving compaction with spark-plasma sintering

Numbering: 2011, volume 45, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (302 kB)

1. TXT document (31 kB)

Contibutors: Knaislová, Anna (author) / Novák, Pavel (author) / Průša, Filip (author) / Stoulil, Jan (author)

1. PDF document (1104 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

DSC/TG of Al-based alloyed powders for p/m applications

Contibutors: Šuštaršič, Borivoj (author) / Medved, Jože (author) / Glodež, Srečko (author) / Šori, Marko (author) / Korošec, Albert (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

Characterization of a porous nickel-titanium alloy produced with self-propagating high-temperatur...

Contibutors: Tosun, Gul (author) / Kilic, Musa (author) / Ozler, Latif (author) / Tosun, Nihat (author)

1. PDF document (4124 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Multicaloric effect in polycrystalline Pb(Fesub0.5Nbsub(0.5))Osub3

Contibutors: Prah, Uroš (author) / Wencka, Magdalena (author) / Kutnjak, Zdravko (author) / Vrabelj, Marko (author) / Drnovšek, Silvo (author) / Malič, Barbara (author) / Uršič, Hana (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2483 kB)

1. TXT document (22 kB)

Fabrication and simulation of feedstock for titanium-powder injection-molding cortical-bone screws

Contibutors: Urtekin, Levent (author) / Genç, Asým (author) / Bozkurt, Fatih (author)

1. PDF document (1912 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Synergy of waste glass powder and waste rubber: a research on loading, perseverance and morpholog...

Contibutors: Praburanganathan, Selvaraj (author) / Chithra, Sarangapani (author)

1. PDF document (2979 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

The influence of the morphology of iron powder particles on their compaction in an automatic die

Contibutors: Šuštaršič, Borivoj (author) / Godec, Matjaž (author) / Donik, Črtomir (author) / Paulin, Irena (author) / Glodež, Srečko (author) / Šori, Marko (author) / Ratej, Milan (author) / Javornik, Nada (author)

1. PDF document (1209 kB)

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Development of Fe-Si-B powders for soft-magnetic application

Contibutors: Godec, Matjaž (author) / Mandrino, Djordje (author) / Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Prešern, Vasilij (author)

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (776 kB)

Novel materials based on Lasub0.75SrsubxAsub0.25-xCrsub0.5Mnsub0.5Osub3 (A=Ba, Ca, Mg) as full-ce...

Contibutors: Skalar, Tina (author) / Marinšek, Marjan (author) / Zupan, Klementina (author)

1. PDF document (2467 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Synthesis of nanocrystalline nickel-zinc ferrites within reverse micelles

Contibutors: Uskoković, Vuk (author) / Drofenik, Mihael (author)

Sinteza in lastnosti prahov Baspodaj(1-x)LaspodajxTiOspodaj3 pripravljenih s hidrotermalno sintezo (1997, volume 31, issue 5)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (110 kB)

1. TXT document (13 kB)

Contibutors: Urek, Sandra (author) / Drofenik, Mihael (author)

Integrated statistical methodology for optimizing the machining parameters in SiC powder mixed - ...

Provider: Narodna in univerzitetna knjižnica

1. PDF document (802 kB)

1. TXT document (15 kB)

Contibutors: Modi, Manoj (author) / Agarwal, Gopal (author)

1. PDF document (1477 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Friction and wear behaviour of ulexite and cashew in automotive brake pads

Contibutors: Sugözü, Ilker (author) / Mutlu, Ibrahim (author) / Keskin, Ahmet (author)

1. PDF document (1170 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Analysis of the boronized layer on K 190 PM tool steel

Contibutors: Hudáková, Mária (author) / Kusý, Martin (author) / Sedlická, Viktória (author) / Grgač, Peter (author)

Numbering: 2007, volume 41, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (631 kB)

Some new directions in aluminum-based PM materials for automotive applications

Contibutors: Vukčević, Mira (author) / Dejilić, Kemal (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (238 kB)

Adsorption of Ni (II) ions from aqueous solution on anode dust

Contibutors: Štrkalj, Anita (author) / Rađenović, Ankica (author) / Malina, Jadranka (author)

Material parameters for a numerical simulation of a compaction process for sintered double-height...

Numbering: 2010, volume 57, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (809 kB)

1. TXT document (13 kB)

Contibutors: Verlak, Tomaž (author) / Šori, Marko (author) / Glodež, Srečko (author)

Rheological properties of alumina ceramic slurries for ceramic shell-mould fabrication

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (865 kB)

1. TXT document (14 kB)

Contibutors: Szymańska, Joanna (author) / Wiśniewski, Paweł (author) / Małek, Marcín (author) / Mizera, Jarosław (author)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (333 kB)

Determination of the metal concentrations in an anode material for solid-oxide fuel cells

Contibutors: Skalar, Tina (author) / Golobič, Amalija (author) / Marinšek, Marjan (author) / Maček, Jadran (author)

Combustible precursor behaviour in the lanthanum chromite formation process

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (509 kB)

1. TXT document (33 kB)

Contibutors: Zupan, Klementina (author) / Marinšek, Marjan (author) / Novosel, Barbara (author)

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (920 kB)

Structural, thermal and magnetic properties of barium-ferrite powders substituted with Mn, Cu or ...

Contibutors: Gurbuz, Aylin (author) / Onar, Nurhan (author) / Ozdemir, Ismail (author) / Karaoglanli, Abdullah Cahit (author) / Celik, Erdal (author)

Characterization of non-ferrous metal powders

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (562 kB)

1. TXT document (28 kB)

Contibutors: Kraner, Jakob (author) / Medved, Jože (author) / Godec, Matjaž (author) / Paulin, Irena (author)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (791 kB)

Powder-metallurgy preparation of NiTi shape-memory alloy using mechanical alloying and spark-plas...

Contibutors: Novák, Pavel (author) / Moravec, Hynek (author) / Vladimír, Vojtěch (author) / Knaislová, Anna (author) / Školáková, Andrea (author) / Kubatík, Tomáš (author) / Kopeček, Jaromír (author)

1. PDF document (1225 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Properties of Cu-based alloys-powders for brazing prepared by water atomization

Contibutors: Šuštaršič, Borivoj (author) / Breskvar, Bojan (author) / Leskovšek, Vojteh (author) / Rodič, Alenka (author)

1. PDF document (1323 kB)

Numbering: 1994, volume 28, issue 4

Provider: Narodna in univerzitetna knjižnica

1. TXT document (32 kB)

Effect of preheating on mechanical properties in induction sintering of metal-powder material Fe ...

Contibutors: Akpinar, Göksan (author) / Atik, Enver (author)

1. PDF document (3986 kB)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Miswak (Salvadora Persica roots): discovery of a new biomaterial for removing heavy metals from w...

Contibutors: Aljlil, Saad A. (author)

Influence of alloying elements on the mechanical properties of a cobalt-based alloy produced with...

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (187 kB)

1. TXT document (23 kB)

Contibutors: Nová, Kateřina (author) / Novák, Pavel (author) / Dvorský, Drahomír (author)

1. PDF document (1692 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Filtration process of industrial gases from dust using basaltic filter

Contibutors: Khalmuradovich, Sattarov Laziz (author) / Dusmurotova, Atakulova Dilbar (author)

Numbering: 2015, volume 62, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (740 kB)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A numerical simulation of metal injection moulding

Contibutors: Berginc, Boštjan (author) / Brezočnik, Miran (author) / Kampuš, Zlatko (author) / Šuštaršič, Borivoj (author)

1. PDF document (1692 kB)

Numbering: 2009, volume 43, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

NiAl intermetallic prepared with reactive sintering and subsequent powder-metallurgical plasma-si...

Contibutors: Michalcová, Alena (author) / Vojtěch, Dalibor (author) / Kubatík, Tomáš (author) / Novák, Pavel (author) / Dvořák, Petr (author) / Svobodová, Petra (author) / Marek, Ivo (author)

1. PDF document (1186 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Cutting-tool recycling process with the zinc-melt method for obtaining thermal-spray feedstock po...

Contibutors: Altuncu, Ekrem (author) / Ustel, Fatih (author) / Turk, Ahmet (author) / Ozturk, Savas (author) / Erdogan, Garip (author)

1. PDF document (1067 kB)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Impression relaxation and creep behavior of Al/SiC nanocomposite

Contibutors: Kakhki, Yasaman Saberi (author) / Nategh, Saeid (author) / Mirdamadi, Shamsoddin (author)

Characterization of an Cu-Cr-Zr alloy synthesized with the powder-metallurgy technique

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (294 kB)

1. TXT document (23 kB)

Contibutors: Ipek, Mediha (author)

The influence of powder selection and process conditions on the characteristics of some oil-retai...

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (910 kB)

1. TXT document (13 kB)

Contibutors: Šuštaršič, Borivoj (author) / Godec, Matjaž (author) / Kocijan, Aleksandra (author) / Donik, Črtomir (author)

1. PDF document (1097 kB)

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Rare earth perovskite-type oxides as gas sensors

Contibutors: Gusmano, Gualtiero (author) / Traversa, Enrico (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (107 kB)

Properties of Alsub2Osub3/TiOsub2 and ZrOsub2/CaO flame-sprayed coatings

Contibutors: Czupryński, Artur (author)

1. PDF document (1652 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Study of the properties and structure of selected tool steels for cold work depending on the para...

Contibutors: Kuřík, Martin (author) / Lacza, Jakub (author) / Vlach, Tomáš (author) / Sobotová, Jana (author)

1. PDF document (1435 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigating the influence of cutting speed on the tool life of a cutting insert while cutting D...

Contibutors: Dubovská, Rozmarína (author) / Majerík, Jozef (author) / Čep, Robert (author) / Kouríl, Karel (author)

1. PDF document (1139 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of induction and classical-sintering effects on powder-metal parts with the finite-...

Contibutors: Akpinar, Göksan (author) / Çivi, Can (author) / Atik, Enver (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (433 kB)

Microstructure and mechanical properties of Stellite 6 alloy powders incorporated with Ti/B4C usi...

Contibutors: Zhu, Zhi-Yuan (author) / Ouyang, Chun (author) / Chen, Jia-Huan (author) / Qiao, Yanxin (author)

1. PDF document (2495 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Surface oxide analysis of water atomised Al and Al-Si powders (1995, volume 29, issue 5/6)

Contibutors: Hertl, Bojan (author) / Breskvar, Bojan (author) / Kosec, Ladislav (author) / Zalar, A. (author) / Praček, B. (author)

Processing Sm-Fe(Ta)-N hard magnetic materials

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (382 kB)

1. TXT document (7 kB)

Contibutors: Žužek Rožman, Kristina (author) / McGuiness, Paul J. (author) / Kobe, Spomenka (author)

Application of powder metallurgy in the processing of aluminium scraps with high-iron contents

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (127 kB)

1. TXT document (22 kB)

Contibutors: Vojtěch, Dalibor (author) / Průša, Filip (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (480 kB)

Collection and analysis of particulate matter deposition around the Port of Koper

Contibutors: Jereb, Gregor (author) / Marzi, Boris (author) / Cepak, Franka (author) / Katz, Sidney A. (author) / Poljšak, Borut (author)

Source: Sanitarno inženirstvo

Numbering: 2009, volume 3, issue 1

Provider: Inštitut za sanitarno inženirstvo
(Obvezni izvod spletne publikacije)

1. PDF document (1526 kB)

1. TXT document (36 kB)

Environmental impacts of asphalt and cement composites with addition of EAF dust

Contibutors: Oblak, Tina (author) / Ščančar, Janez (author) / Vahčič, Mitja (author) / Zuliani, Tea (author) / Mladenovič, Ana (author) / Milačič, Radmila (author)

Numbering: 2011, volume 58, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (697 kB)

Colour image in 2D and 3D microscopy for the automation of pollen rate measurement

Contibutors: Bonton, Pierre (author) / Boucher, Alain (author) / Thonnat, Monique (author) / Tomczak, Regis (author) / Hidalgo, Pablo J. (author) / Belmonte, Jordina (author) / Galan, Carmen (author)

Source: Image analysis and stereology

Numbering: 2002, volume 21, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (273 kB)

Solid-state sintering of (Ksub0.5Nasub0.5)NbOsub3 synthesized from an alkali-carbonate-based low-...

Contibutors: Feizpour, Mahdi (author) / Ebadzadeh, Touradj (author) / Jenko, Darja (author)

1. PDF document (3739 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

The friction and wear behavior of Cu-Nisub3Al composites by dry sliding

Contibutors: Demirel, Mehtap (author) / Muratoglu, Mehtap (author)

Effects of an addition of coir-pith particles on the mechanical properties and erosive-wear behav...

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (348 kB)

1. TXT document (26 kB)

Contibutors: Jose, Arul Sujin (author) / Athijayamani, Ayyanar (author) / Ramanathan, Kalimuthu (author) / Sidhardhan, Susaiyappan (author)

Separation of the inter- and intra-particle porosity in images of powder compacts

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (805 kB)

1. TXT document (57 kB)

Contibutors: Lacaze, Jacques (author) / Arnal, Alexis (author) / Dupuy, Jean-Luc (author) / Poquillon, Dominique (author)

Source: Image analysis and stereology

Numbering: 2002, volume 21, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (5204 kB)

1. TXT document (20 kB)

Evolution of the microstructure and magnetic properties of a cobalt-silicon-based alloy in the ea...

Contibutors: Rattanasakulthong, Watcharee (author) / Sirisathitkul, Chitnarong (author) / Rogl, Peter Franz (author)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (445 kB)

Application of optimization techniques to determine parameters of the Vibe combustion model

Contibutors: Prah, Ivo (author) / Katrašnik, Tomaž (author)

Reduction of ultra-fine tungsten powder with tungsten (VI)-oxide in a vertical tube reactor

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (392 kB)

1. TXT document (36 kB)

Contibutors: Kamberović, Željko (author) / Filipović, Dušica (author) / Raić, Karlo (author) / Tasić, Miloš (author) / Anđić, Zoran (author) / Gavrilovski, Milorad (author)

Preparation of NiO/YSZ powders using a Pechini-type method

Numbering: 2011, volume 45, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (426 kB)

1. TXT document (26 kB)

Contibutors: Razpotnik, Tanja (author) / Francetič, Vojmir (author) / Maček, Jadran (author)

The influence of scanning speed on the laser metal deposition of Ti/TiC powders

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (450 kB)

1. TXT document (20 kB)

Contibutors: Sobiyi, Kehinde (author) / Akinlabi, Esther T. (author) / Akinlabi, Stephen (author)

1. PDF document (3355 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the copper amount in iron-based powder-metal compacts

Contibutors: Çavdar, Ugur (author) / Ünlü, Bekir Sadik (author) / Atik, Enver (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (629 kB)

Porous magnesium alloys prepared by powder metallurgy

Contibutors: Salvetr, Pavel (author) / Novák, Pavel (author) / Vojtěch, Dalibor (author)

1. PDF document (2471 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Synthesis and characterisation of closed cells aluminium foams containing dolomite powder as foam...

Contibutors: Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Paulin, Irena (author) / Šuštaršič, Borivoj (author) / Jenko, Monika (author)

Synthesis and characterization of graphene nanosheets/magnesium composites processed through powd...

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (959 kB)

1. TXT document (38 kB)

Contibutors: Du, Xiaoming (author) / Zheng, Kaifeng (author)

1. PDF document (2004 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The mineralogical composition of dust from an electric arc furnace

Contibutors: Sofilić, Tahir (author) / Novosel-Radović, Vjera (author) / Cerjan-Stefanović, Štefica (author) / Rastovčan-Mioč, Alenka (author)

Numbering: 2005, volume 39, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (419 kB)

Practical determination of the coordination number in granular media

Contibutors: Jouannot-Chesney, Patricia (author) / Jernot, Jean-Paul (author) / Lantuéjoul, Christian (author)

Source: Image analysis and stereology

Numbering: 2006, volume 25, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (338 kB)

Investigation of hole profiles in deep micro-hole drilling of AISI 420 stainless steel using powd...

Contibutors: Yilmaz, Volkan (author)

1. PDF document (1021 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Effect of the addition of niobium and aluminium on the microstructures and mechanical properties ...

Contibutors: Gündüz, Süleyman (author) / Erden, Mehmet Akif (author) / Karabulut, Hasan (author) / Turkmen, Mustafa (author)

1. PDF document (2075 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Simulation of growth kinetics of Fe2B layers formed on gray cast iron during the powder-pack bori...

Contibutors: Ortiz-Domínguez, Martin (author) / Flores-Rentería, Miguel Ángel (author) / Keddam, Mourad (author) / Elias-Espinosa, Milton (author) / Damián-Mejía, Omar (author) / Aldana-González, Jorge Iván (author) / Zuno-Silva, Jorge (author) / Medina-Moreno, Sergio Alejandro (author) / González-Reyes, José Gonzalo (author)

Friction-stir processing of a composite aluminium alloy (AA 1050) reinforced with titanium carbid...

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (774 kB)

1. TXT document (45 kB)

Contibutors: Sanusi, Kazeem Oladele (author) / Akinlabi, Esther T. (author)

1. PDF document (3328 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Compacting the powder of Al-Cr-Mn alloy with SPS

Contibutors: Kubatík, Tomáš (author) / Pala, Zdeněk (author) / Novák, Pavel (author)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (551 kB)

Morphological and microstructural features of Al-based alloyed powders for powder-metallurgy appl...

Contibutors: Šuštaršič, Borivoj (author) / Paulin, Irena (author) / Godec, Matjaž (author) / Glodež, Srečko (author) / Šori, Marko (author) / Flašker, Jože (author) / Korošec, Albert (author) / Kores, Stanislav (author) / Abramović, Goran (author)

1. PDF document (4971 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

The correlation between the properties and the type of reinforcement in Al-matrix powder-metallur...

Contibutors: Vukčević, Mira (author) / Delijić, Kemal (author) / Vuksanović, Darko (author)

Numbering: 2001, volume 35, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (746 kB)

Effects of the water based plant care concentrate, Mineral, on winter wheat

Contibutors: Prah, Nina (author) / Jakop, Manfred (author) / Bavec, Franc (author)

Source: Agricultura (Maribor)

Numbering: 2011, volume 8, issue 1

Provider: Univerza v Mariboru, Fakulteta za kmetijstvo
(Obvezni izvod spletne publikacije)

1. PDF document (325 kB)

1. TXT document (30 kB)

Producing antibacterial silver-doped hydroxyapatite powders with chemical precipitation and resha...

Contibutors: Baştan, Fatih Erdem (author) / Özbek, Yildiz Yarali (author)

1. PDF document (1321 kB)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Workability behaviour of Cu-TiBsub2 powder-metallurgy preforms during cold upsetting

Contibutors: Gadakary, Saikumar (author) / Khanra, Asit Kumar (author) / Davidson, Maharajan Joseph (author)

1. PDF document (1697 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Environmental impact of dusting from the Koper port bulk cargo terminal on the agricultural soils

Contibutors: Zupančič, Nina (author) / Horvat, Aleksander (author) / Jarc, Simona (author) / Fister, Matej (photographer)

Source: Acta geographica Slovenica

Numbering: 2015, volume 55, issue 1

Provider: ZRC SAZU
(Obvezni izvod spletne publikacije)

1. PDF document (440 kB)

1. TXT document (56 kB)

Organic compounds in the urban dusts in Celje area

Contibutors: Žibret, Gorazd (author)

Source: Geologija

Numbering: 2013, volume 56, issue 1

Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (5187 kB)

1. TXT document (43 kB)

SEM/EDS characterisation of dusty deposits in precipitation and assessment of their origin

Contibutors: Miler, Miloš (author)

Source: Geologija

Numbering: 2014, volume 57, issue 1

Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (635 kB)

1. TXT document (43 kB)

Influence of ironworks on distribution of chemical elements in Bosnia and Herzegovina and Slovenia

Contibutors: Alijagić, Jasminka (author) / Šajn, Robert (author)

Source: Geologija

Numbering: 2006, volume 49, issue 1

Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (292 kB)

1. TXT document (34 kB)

Mercury in soil and attic dust as a reflection of Idrija mining and mineralization (Slovenia)

Contibutors: Gosar, Mateja (author) / Šajn, Robert (author)

Source: Geologija

Numbering: 2001, volume knj. 44, issue 1

Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (3944 kB)

1. TXT document (72 kB)

Powder injection molding an alternative method in the manufacturing of parts for vehicles

Contibutors: Gonzalez-Gutierrez, Joamin (author) / Emri, Igor (author)

Source: Anali PAZU

Numbering: 2014, volume 4, issue 2

Provider: Združenje Pomurska akademsko znanstvena unija
(Obvezni izvod spletne publikacije)

1. PDF document (1454 kB)

Opportunities for incorporating geography into the river basin management

Contibutors: Prah, Klemen (author)

Source: Dela - Oddelek za geografijo Filozofske fakultete v Ljubljani

Numbering: 2012, issue 37

Provider: Univerza v Ljubljani, Filozofska fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (732 kB)

1. TXT document (48 kB)

Preparation and investigation of the thermal stability of phosphate-modified TiOsub2 anatase powd...

Contibutors: Prah, Uroš (author) / Kozjek-Škofic, Irena (author)

Source: Acta chimica slovenica

Numbering: 2017, volume 64, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (794 kB)

1. TXT document (32 kB)

Protective alumina coatings prepared by aerosol deposition on magnetocaloric gadolinium elements

Contibutors: Šadl, Matej (author) / Tomc, Urban (author) / Prah, Uroš (author) / Uršič Nemevšek, Hana (author)

Source: Informacije MIDEM

Numbering: 2019, volume 49, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2682 kB)

Surface coating of HDDR processed nanocrystalline powders

Contibutors: Kobe, Spomenka (author) / Novak, Saša (author) / McGuiness, Paul J. (author)

Source: Informacije MIDEM

Numbering: 1999, volume 29, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale

1. PDF document (413 kB)

1. PDF document (1169 kB)

Značilnosti cvetnega prahu

Contibutors: Simčič, Anja (author)

Source: Naše okolje

Numbering: 2019, volume 26, issue 11

Provider: Agencija Republike Slovenije za okolje

1. PDF document (467 kB)

1. TXT document (12 kB)

Alergeni cvetni prah

Contibutors: Simčič, Anja (author)

Source: Naše okolje

Numbering: 2020, volume 27, issue 1

Provider: Agencija Republike Slovenije za okolje

Obremenjenost zraka s cvetnim prahom v letu 2020

Contibutors: Kofol-Seliger, Andreja (author) / Cegnar, Tanja (author) / Simčič, Anja (author)

Source: Naše okolje

Numbering: 2020, volume 27, issue 12

Provider: Agencija Republike Slovenije za okolje

1. PDF document (399 kB)

Removal of Nasub2SOsub4 from a filter ash

Contibutors: Janc, Blaž (author) / Hann, Damjan (author)

Evaluation of powder mixtures of selected plants as protectants of cowpea (Vigna unguiculata L. W...

Numbering: 2019, volume 66, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (765 kB)

1. TXT document (22 kB)

Contibutors: Joda, Abiodun Oladipupo (author) / Sanni, Arewa Yisa (author)

Source: Acta entomologica slovenica (Ljubljana)

Numbering: 2019, volume 27, issue 2

Provider: Prirodoslovni muzej Slovenije

1. PDF document (275 kB)

1. TXT document (49 kB)

Investigation of mechanical properties of horn powder-filled epoxy composites

Contibutors: Kumar, Duraisamy (author) / Rajendra Boopathy, Sadayan (author) / Sangeetha, Dharmalingam (author) / Bharathiraja, Govindarajan (author)

1. PDF document (2956 kB)

Numbering: 2017, volume 63, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

A Surveillance of direct-firing system for pulverized-coal using statistically treated signals fr...

Contibutors: Jurjevčič, Boštjan (author) / Senegačnik, Andrej (author) / Kuštrin, Igor (author)

1. PDF document (1310 kB)

Numbering: 2017, volume 63, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Experimental investigation of the micro-hardness of EN-31 die steel in a powder-mixed near-dry el...

Contibutors: Sundriyal, Sanjay (author) / Vipin, Vipin (author) / Walia, Ravinderjit Singh (author)