dLib.si - material

Effect of severe plastic and heavy cold deformation on the structural and mechanical properties o...

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

1. TXT document (25 kB)

Contibutors: Palán, Jan (author) / Šutta, P. (author) / Kubina, Tomáš (author) / Dománková, Mária (author)

1. PDF document (1140 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Laboratory accreditation - confidence in the activities of conformity assessment of products

Contibutors: Klobodanović, Azemina (author) / Oruč, Mirsada (author)

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (434 kB)

Triton X-100 as an effective surfactant for micropump bubble tolerance enhancement

Contibutors: Pečar, Borut (author) / Resnik, Drago (author) / Možek, Matej (author) / Aljančič, Uroš (author) / Dolžan, Tine (author) / Amon, Slavko (author) / Vrtačnik, Danilo (author)

Source: Informacije MIDEM

Numbering: 2013, volume 43, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1454 kB)

1. TXT document (28 kB)

Determination of the deformational energy during slab-width rolling on an edger mill

Contibutors: Vode, Franci (author) / Jaklič, Anton (author) / Robič, Roman (author) / Košir, Anton (author) / Perko, Franci (author) / Novak, Jani (author)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (577 kB)

Mathematical models for evaluating the influence of degradation on the tensile and flexural prope...

Contibutors: Oladele, Isiaka Oluwole (author) / Adesoji Adediran, Adeolu (author) / Akinwekomi, Akeem Damilola (author) / Adara, Peace Pamilerin (author)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

Raztezanje talin polimerov (1995, volume 29, issue 1/2)

Contibutors: Žerjal, Breda (author)

1. PDF document (1110 kB)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (277 kB)

1. TXT document (8 kB)

Kovinski mehovi v vakuumski tehniki

Contibutors: Gasperič, Jože (author)

Source: Vakuumist

Numbering: 1992, issue 28

Provider: Društvo za vakuumsko tehniko Slovenije

Evaluation of the thermal resistance of selected bentonite binders

Contibutors: Beňo, Jaroslav (author) / Vontorová, Jiřina (author) / Matějka, Vlastimil (author) / Gál, Karel (author)

Monitoring the effect of quartz-sand replacement by amorphous-silica raw material on the microstr...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

1. TXT document (21 kB)

Contibutors: Hušt`avová, Jana (author) / Černý, Vít (author) / Drochytka, Rostislav (author)

1. PDF document (1385 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Viskoznost raztopin poliuretanov (PU) in PU-ionomerov (1997, volume 31, issue 1/2)

Contibutors: Žagar, Ema (author) / Žigon, Majda (author) / Malavašič, Tatjana (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (780 kB)

Temperature and process compensated RF power detector

Contibutors: Saranovac, Lazar (author) / Milićević, Milenko (author) / Milinković, Branislava (author) / Simić, Đorđe (author) / Grujić, Dušan (author)

Source: Informacije MIDEM

Numbering: 2016, volume 46, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1752 kB)

Estimation of the fatigue threshold values for a crack propagating through a bi-material interfac...

Contibutors: Náhlík, Lubos (author)

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

Metalografska preiskava in korozijska odpornost zvarov feritnega nerjavnega jekla

Contibutors: Torkar, Matjaž (author) / Kocijan, Aleksandra (author) / Celin, Roman (author) / Burja, Jaka (author) / Podgornik, Bojan (author)

1. PDF document (3359 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Transport električnega naboja v organskih polprevodnikih, simulacija po metodi Monte Carlo

Contibutors: Pavlica, Egon (author) / Hudej, Robert (author) / Bratina, Gvido (author)

Numbering: 2003, volume 37, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (183 kB)

Comparison of the surface and anticorrosion properties of SiOsub2 and TiOsub2 nanoparticle epoxy ...

Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (541 kB)

Magnetne lastnosti izotropnih Nd-Fe-B trajnih magnetov pripravljenih z rotacijskim stiskanjem

Contibutors: Saje, B. (author) / Harris, I. R. (author) / Villiams, A. J. (author) / Beseničar, S. (author)

Načini preprečevanja raztapljanja neravnotežnih trdnih faz v večfaznih mešanicah s talino

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (618 kB)

1. TXT document (14 kB)

Contibutors: Lojen, Gorazd (author) / Anžel, Ivan (author) / Križman, Alojz (author)

Vpliv pakiranja zgorevalne zmesi na potek sinteze pri citratno nitratnem postopku

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (503 kB)

1. TXT document (25 kB)

Contibutors: Zupan, Klementina (author) / Kolar, Drago (author) / Kramberger, Albina (author)

1. PDF document (1468 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Use of numerical simulation in the production of porous-metal castings

Contibutors: Radkovský, Filip (author) / Merta, Václav (author)

1. PDF document (1037 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Oxidation of molybdenum by low-energy oxygen-ion bombardment

Contibutors: Jelovica Badovinac, Ivana (author) / Kavre, Ivna (author) / Šarić, Iva (author) / Peter, Robert (author) / Petravić, Mladen (author)

Uporaba koagentov pri peroksidnem premreževanju etilen-propilen-dienskega kavčuka

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (697 kB)

1. TXT document (23 kB)

Contibutors: Marinović, Tatjana (author)

Increasing the wear resistance of Al-Mg components using thermal-spray coatings

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (392 kB)

1. TXT document (9 kB)

Contibutors: Lukauskaitë, Raimonda (author) / Černašejus, Olegas (author) / Škamat, Jelena (author) / Asadauskas, Svajus (author) / Ručinskienë, Alma (author) / Kalpokaitë-Dičkuvienë, Regina (author) / Višniakov, Nikolaj (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

Sodobni anorganski materiali in nanotehnologije

Contibutors: Suvorov, Danilo [08012] (project leader)

Duration: 2014 2009/12 01

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (1259 kB)

1. TXT document (71 kB)

Modification of non-metallic inclusions with rare-earth metals in 50CrMoV13-1 steel

Contibutors: Šuler, Blaž (author) / Burja, Jaka (author) / Medved, Jože (author)

1. PDF document (1783 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

An evaluation of the properties of rotor forgings made from 26NiCrMoV115 steel

Contibutors: Balcar, Martin (author) / Turecký, Václav (author) / Sochor, Libor (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Bažan, Jiří (author) / Němeček, Stanislav (author) / Kešner, Dušan (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (474 kB)

Fatigue properties of sintered DIN SINT-D30 powder metal before and after heat treatment

Contibutors: Šori, Marko (author) / Šuštaršič, Borivoj (author) / Glodež, Srečko (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

Materiali in nosilnost velikih kotalnih ležajev

Contibutors: Kunc, Robert (author) / Prebil, Ivan (author) / Torkar, Matjaž (author)

1. PDF document (1277 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Materiali in tehnologije (2015, volume 49, issue 5)

Simulation of latent-heat thermal storage integrated with room structures

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (42 MB)

1. TXT document (706 kB)

Contibutors: Charvat, Pavel (author) / Mauder, Tomas (author) / Ostry, Milan (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (466 kB)

Elektrotehna Ljubljana (električni likalnik / tehnično trgovsko podjetje z elektrotehničnim mater...

Source: slike

Provider: Narodna in univerzitetna knjižnica

JPEG file (832 kB)

Elektrotehna Zagreb (tehnička radnja i trgovina električnim materialom)

Source: slike

Provider: Narodna in univerzitetna knjižnica

JPEG file (901 kB)

Elektrotehna Zagreb (tehnička radnja i trgovina električnim materialom)

Source: slike

Provider: Narodna in univerzitetna knjižnica

JPEG file (660 kB)

Elektrotehna Zagreb (električni likalnik / tehnička radnja i trgovina električnim materialom)

Source: slike

Provider: Narodna in univerzitetna knjižnica

JPEG file (904 kB)

Aluminium alloys for cylinder heads

Contibutors: Kores, Stanislav (author) / Zak, Hennadiy (author) / Tonn, Babette (author)

Numbering: 2008, volume 55, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (720 kB)

Uporaba polietersulfona za kapacitivni tankoplastni senzor relativne vlažnosti zraka (1997, volume 31, issue 1/2)

Contibutors: Požun, Karol (author) / Koller, Lidija (author) / Irmančnik-Belič, Lidija (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (520 kB)

A crack growth analysis in critical structural components

Contibutors: Semenski, Damir (author) / Božić, Željko (author) / Wolf, Hinko (author)

The role of contact friction and rheology in the deformation at plastometric tests of rheological...

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (300 kB)

1. TXT document (23 kB)

Contibutors: Schlomchack, G.G. (author) / Mamuzić, I. (author) / Vodopivec, Franc (author)

Numbering: 1994, volume 28, issue 4

Provider: Narodna in univerzitetna knjižnica

1. PDF document (670 kB)

Effect of the by-pass cement-kiln dust and fluidized-bed-combustion fly ash on the properties of ...

Contibutors: Bílek, Vlastimil (author) / Pařízek, Ladislav (author) / Kalina, Lukáš (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (65 kB)

Vodna atomizacija in zgoščevanje Ni-superzlitine

Contibutors: Torkar, Matjaž (author) / Šuštaršič, Borivoj (author) / Žvokelj, J. (author)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (829 kB)

Študij notranje oksidacije v naogljičenih hitrostrjenih trakovih Cu

Contibutors: Rudolf, Rebeka (author) / Kosec, Ladislav (author) / Anžel, Ivan (author) / Gusel, Leo (author) / Poharc, Mojmir (author)

Numbering: 2007, volume 41, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (548 kB)

Materiali in tehnologije (2008, volume 42, issue 1)

Računalniško podprta simulacija plana valjanja trakov na valjalnem stroju Steckel (1997, volume 31, issue 3/4)

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (18 MB)

1. TXT document (142 kB)

Contibutors: Fajfar, Peter (author) / Turk, Radomir (author) / Nardin, Vladimir (author) / Robič, Roman (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (676 kB)

Vpliv elektronske strukture materialov na magnetno kalorični pojav

Contibutors: Matej Komelj [Šif. raz.: 15654] (project leader)

Duration: 01.2007/12.2009

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (238 kB)

1. TXT document (41 kB)

RMZ - Materials and geoenvironment (2010, volume 57, issue 2)

1. PDF document (4414 kB)

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (239 kB)

Computer-aided modeling and simulation of fabrication steps in semiconductor processes

Contibutors: Runovc, Franc (author)

Numbering: 1994, volume 28, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (550 kB)

Zynq-based system for extracting sorted subsets from large data sets

Contibutors: Sklyarov, V. (author) / Skliarova, I. (author) / Rjabov, A. (author) / Sudnitson, A. (author)

Source: Informacije MIDEM

Numbering: 2015, volume 45, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1113 kB)

1. TXT document (46 kB)

Fatigue problems of transmission belts:

Contibutors: Emri, Igor (author) / Kramar, Janez (author) / Nikonov, Anatolij (author) / Florjančič, Urška (author) / Hribar, Anton (author)

The behaviour of a two-componenet back-filling grout used in a tunnel-boring machine

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (512 kB)

1. TXT document (14 kB)

Contibutors: Peila, Daniele (author) / Borio, Luca (author) / Pelizza, Sebastiano (author)

Source: Acta geotechnica Slovenica

Numbering: 2011, volume 8, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (252 kB)

1. TXT document (38 kB)

Mixed municipal solid waste (MSW) treatment in Waste centre Spodnji Stari Grad, Krško

Contibutors: Kortnik, Jože (author) / Leskovar, Jože (author)

1. PDF document (4167 kB)

Numbering: 2013, volume 60, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Lasersko reparaturno varjenje termo razpok na orodjih za tlačno litje aluminija

Contibutors: Pleterski, Matej (author) / Tušek, Janez (author) / Kosec, Ladislav (author) / Klobčar, Damjan (author) / Muhič, Mitja (author) / Muhič, Tadej (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (940 kB)

Determination of the chemical composition and heterogeneity range of highly dense PLZT ceramics b...

Contibutors: Samardžija, Zoran (author) / Marinenko, Ryna B. (author) / Bernik, Slavko (author) / Kosec, Marija (author) / Čeh, Miran (author)

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (258 kB)

Opeka in moderna

Contibutors: Laaksonen, Esa (author)

Source: AB. Arhitektov bilten

Numbering: 2008, volume 38, issue 177/178

Provider: Društvo arhitektov Ljubljana

1. PDF document (209 kB)

Compositional and microstructural study of sol-gel-derived PbZrsub(0.3)Tisub(0.7)Osub3 /Alsub2Osu...

Contibutors: Khomyakova, Evgeniya (author) / Benčan, Andreja (author) / Malič, Barbara (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2256 kB)

Assessing the stress fields in an injection-moulded undercut geometry during ejection supported b...

Contibutors: Florjanič, Blaž (author) / Božič, Uroš (author) / Zafošnik, Boštjan (author)

Recikliranje gnetnih aluminijevih zlitin v tovarni Impol d.d.

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (265 kB)

1. TXT document (26 kB)

Contibutors: Čokl, Jernej (author) / Šafhalter, Rajko (author) / Brodnjak, Davorin (author) / Kevorkijan, Varužan (author)

O deformacijski odpornosti jekel po uporabi v visokotlačnem parnem kotlu (1997, volume 31, issue 5)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (80 kB)

1. TXT document (25 kB)

Contibutors: Vodopivec, Franc (author) / Ule, Boris (author) / Žvokelj, Janez (author)

1. PDF document (1649 kB)

Provider: Narodna in univerzitetna knjižnica

A failure criterion for single-crystal superalloys during thermocyclic loading

Contibutors: Getsov, Leonid (author) / Semenov, Artem (author) / Staroselsky, Alexander (author)

The influence of elevated temperatures on microstructure of cast irons for automotive engine ther...

Numbering: 2008, volume 42, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (515 kB)

1. TXT document (35 kB)

Contibutors: Unkić, Faruk (author) / Glavaš, Z. (author) / Terzić, Katarina (author)

1. PDF document (1227 kB)

Numbering: 2009, volume 56, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Raziskave vgrajevanja Pbzgoraj(2+) v keramiko na osnovi trdnih raztopin Baspodaj(6-x)Ndspodaj(8+2... (1997, volume 31, issue 1/2)

Contibutors: Podlipnik, Mojca (author) / Valant, Matjaž (author) / Suvorov, Danilo (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (734 kB)

Raziskave cevi uparjalnika

Contibutors: Vojvodič-Tuma, Jelena (author) / Korošec, Darko (author) / Gudek, K. (author)

Korozijska obstojnost nekaterih nerjavnih jekel

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

1. TXT document (20 kB)

Contibutors: Kos, Ivan (author) / Grešovnik, Ferdinand (author) / Grešovnik, Marija Magdalena (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (106 kB)

Mehanske lastnosti prepletenih polimernih mrež (1995, volume 29, issue 5/6)

Contibutors: Anžlovar, Alojz (author) / Anžur, Irena (author) / Malavašič, Tatjana (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (516 kB)

Generator mreže za modeliranje strjevanja teles zapletenih oblik z dvojno recipročno metodo robni... (1995, volume 29, issue 1/2)

Contibutors: Košir, Aleš (author) / Šarler, Božidar (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (577 kB)

Use of artificial neural networks in ball burnishing process for the prediction of surface roughn...

Contibutors: Esme, Ugur (author) / Sagbas, Aysun (author) / Kahraman, Funda (author) / Kulekci, Mustafa Kemal (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (237 kB)

10 Gb/s 2sup15 - 1 pseudo-random binary sequence generator

Contibutors: Pavlovič, Leon (author) / Vidmar, Matjaž (author) / Tomažič, Sašo (author)

Source: Informacije MIDEM

Numbering: 2012, volume 42, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (305 kB)

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidi...

Contibutors: Yi, Xiaojie (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Xu, Yajun (author) / Mahamane Sani, Abdou Yahouza (author)

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The dependence of the heat energy consumption upon the working intensity and the isolation maint...

Contibutors: Črnko, Josip (author)

Pridobivanje Ge-precipitata iz ZnS-koncentrata flotacije

Numbering: 1992, volume 26, issue 4

Provider: Narodna in univerzitetna knjižnica

1. PDF document (507 kB)

1. TXT document (13 kB)

Contibutors: Obal, M. (author) / Rozman, S. (author) / Todorovič, G. (author) / Fajmut-Štrucelj, S. (author)

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (567 kB)

Sinteza magnetnih nanodelcvev za mikrovalovne absorberje in magnetne tekočine

Contibutors: Darko Makovec [Šif. raz.: 10372] (project leader)

Duration: 01.2007/12.2009

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (272 kB)

1. TXT document (56 kB)

Izdelava žice iz zlitine AlMg5 za kovice in vijake (1996, volume 30, issue 1/2)

Contibutors: Vasevska, Trajanka (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (735 kB)

Characteristics of SnO2 doped ZnO-Bi2O3 ceramics

Contibutors: Daneu, Nina (author) / Bernik, Slavko (author)

Laser welding of the new grade of advanced high-strength steel Domex 960

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (894 kB)

1. TXT document (22 kB)

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Lisiecki, Aleksander (author)

1. PDF document (4387 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate

Contibutors: Maretić, Mauro (author) / Smoljan, Božidar (author) / Iljkić, Dario (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (948 kB)

The use of fractal geometry for the assessment of the diversufication of macro-pores in concrete

Contibutors: Konkol, Janusz (author) / Prokopski, Grzegorz (author)

Source: Image analysis and stereology

Numbering: 2011, volume 30, issue 2

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (1176 kB)

Wear level influence on chip segmentation and vibrations of the cutting tool

Contibutors: Antić, Aco (author) / Kovačevič, Dušan (author) / Zeljković, Milan (author) / Kosec, Borut (author) / Novak Marcinčin, Jozef (author)

Synthesis of a Fe3O4/PAA-based magnetic fluid for faraday-rotation measurements

Numbering: 2011, volume 58, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (695 kB)

1. TXT document (29 kB)

Contibutors: Kürçükdermenci, Serhat (author) / Kutluay, Deniz (author) / Avgin, Ibrahim (author)

1. PDF document (1345 kB)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint

Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (792 kB)

Corrosion resistance of CrAlVN coatings deposited on PCrNi3Mo steel surfaces with reactive magnet...

Contibutors: Jin, Hao (author) / Li, De-Yuan (author) / Sun, Hai-Jing (author) / Wang, Lei (author) / Guo, Ce-An (author) / Zhang, Gang (author)

1. PDF document (1215 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Population ranking based differential evolution with simulated annealing for circuit optimization

Contibutors: Olenšek, Jernej (author) / Bürmen, Arpad (author)

Source: Informacije MIDEM

Numbering: 2016, volume 46, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (658 kB)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Development of microstructure of steel for thermal power generation

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

1. TXT document (20 kB)

Contibutors: Kvackaj, Tibor (author) / Kuskulic, T. (author) / Fujda, M. (author) / Pokorny, I. (author) / Weiss, M. (author) / Bevilaqua, T. (author)

Numbering: 2007, volume 41, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

Possibilities of NUS and impact-echo methods for monitoring steel corrosion in concrete

Contibutors: Timčaková-Šamárková, Kristýna (author) / Matysík, Michal (author) / Chobola, Zdeněk (author)

1. PDF document (1342 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of carbon content on the corrosion of MgO-C refractory material caused by acid and ...

Kamen na kamen

Contibutors: Juvanec, Borut (author)

Source: AR. Arhitektura, raziskave

Numbering: 2004, volume 4, issue 1

Provider: Univerza v Ljubljani, Fakulteta za arhitekturo
(Obvezni izvod spletne publikacije)

1. PDF document (94 kB)

1. TXT document (9 kB)

Contibutors: Adolf, Zdeněk (author) / Suchánek, Petr (author) / Husar, Ivo (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (124 kB)

Determination of phosphorus in steel using inductively coupled plasma atomic emission spectrometry

Contibutors: Drglin, Tatjana (author)

Numbering: 2005, volume 39, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (135 kB)

Elektrotehna Ljubljana (tehnično trgovsko podjetje z elektrotehničnim materialom)

Source: slike

Provider: Narodna in univerzitetna knjižnica

JPEG file (625 kB)

Zaviralni sistem v indukcijskem števcu

Contibutors: Chvatal, Damijan (author)

Identification of the material parameters of a unidirectional fiber composite using a micromodel

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

1. TXT document (20 kB)

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Vpliv parametrov pri kontinuirnem litju na mehanske lastnosti zlitine Cu-Cr-Zr

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

1. TXT document (14 kB)

Contibutors: Križman, Alojz (author) / Anžel, Ivan (author) / Gusel, Leo (author)

Simulacijski model ogrevanja gredic v peči Allino

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (596 kB)

1. TXT document (13 kB)

Contibutors: Jaklič, Anton (author) / Kolenko, Tomaž (author) / Glogovac, Branislav (author) / Keček, Branislav (author) / Jamer, Jure (author)

Lasersko kaljenje s pretaljevanjem površinske plasti sive in nodularne litine (1996, volume 30, issue 3/4)

Numbering: 2004, volume 38, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (285 kB)

1. TXT document (23 kB)

Contibutors: Grum, Janez (author) / Šturm, Roman (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (744 kB)

RMZ - Materials and geoenvironment (2011, volume 58, issue 2)

1. PDF document (4017 kB)

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (245 kB)

Kaj morajo načrtovalci novih proizvodov vedeti o tehniki spajanja? (1997, volume 31, issue 3/4)

Contibutors: Tušek, Janez (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (853 kB)

Influence of structural defects on the magnetic properties of massive amorphous Fesub60Cosub10Mos...

Contibutors: Gondro, Joanna (author) / Bloch, Katarzyna (author) / Nabiałek, Marcin (author) / Garus, Sebastian (author)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (576 kB)

Mikrostrukturna karakterizacija trdih prevlek (Ti,Al)N in Cr(C,N)

Contibutors: Samardžija, Zoran (author) / Čeh, Miran (author) / Panjan, Peter (author) / Čekada, Miha (author)

Source: Vakuumist

Numbering: 2004, volume 24, issue 4

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (328 kB)

1. TXT document (10 kB)

Metalurške raziskave za podporo kakovosti

Contibutors: Šegel, Jože (author) / Grešovnik, Ferdo (author)

Tribološke lastnosti jekla nitriranega v plazmi in prekritega z DLC-prevleko

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (384 kB)

1. TXT document (8 kB)

Contibutors: Podgornik, Bojan (author) / Vižintin, Jožef (author) / Leskovšek, Vojteh (author) / Ronkainen, Helena (author) / Holmberg, Kenneth (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (271 kB)

Razpad alfa-AlB12 v zlitinah Al-B in Al-Ti-B

Contibutors: Zupanič, Franc (author) / Spaić, Savo (author) / Križman, Alojz (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (192 kB)

Quantitative analysis of fatigue fracture surface in the duplex steel

Contibutors: Sozańska, Maria (author) / Iacoviello, Francesco (author) / Cwajna, Jan (author) / Jerome, Michel (author) / Sojka, Jaroslav (author) / Galland, Jacques (author)

Source: Image analysis and stereology

Numbering: 2002, volume 21, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (430 kB)