Digitalna knjižnica Slovenije

1. PDF document (2220 kB)

Numbering: 2018, volume 85, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

Estimation of sample spacing in stochastic processes

Contibutors: Ronn-Nielsen, Anders (author) / Sporring, Jon (author) / Vedel Jensen, Eva B. (author)

1. PDF document (1635 kB)

Numbering: 2017, volume 36, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Point data pre-processing based on fuzzy logic for reverse engineering modelling

Contibutors: Budak, Igor (author) / Soković, Mirko (author) / Kopač, Janez (author) / Hodolič, Janko (author)

1. PDF document (4786 kB)

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (31 kB)

Examination and modelling of the influence of cutting parameters on the cutting force and the sur...

Contibutors: Bajić, Dražen (author) / Lela, Branimir (author) / Cukor, Goran (author)

1. PDF document (1643 kB)

Numbering: 2008, volume 54, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (37 kB)

3D morphological modelling of a random fibrous network

Contibutors: Peyrega, Charles (author) / Jeulin, Dominique (author) / Delisée, Christine (author) / Malvestio, Jérôme (author)

1. PDF document (1950 kB)

Numbering: 2009, volume 28, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

Order statistics bayesian-mining agent modelling for automated negotiation

Contibutors: Rahman, Samir Abdel (author) / Bahgat, Reem (author) / Farag, George M. (author)

1. PDF document (9869 kB)

Numbering: 2011, volume 35, issue 1

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Image analysis for modelling shear behaviour

Contibutors: Lopez, Philippe (author) / Riss, Joëlle (author) / Gentier, Sylvie (author) / Flamand, Rock (author) / Archambault, Guy (author) / Bouvet, Soizic (author)

Numbering: 2000, volume 19, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (240 kB)

3-D imaging, analysis and modelling of porous cereal products using X-ray microtomography

Contibutors: van Dalen, Gerard (author) / Nootenboom, Peter (author) / van Vliet, Lucas J (author) / Voortman, Lennard (author) / Esveld, Erik (author)

Modelling parallel service systems in GPSS

Numbering: 2007, volume 26, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (17 MB)

1. TXT document (27 kB)

Contibutors: Žibert, Marko (author) / Kljajić, Miroljub (author)

Source: Organizacija (Kranj)

Numbering: 2006, volume 39, issue 10

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (909 kB)

1. TXT document (51 kB)

Modelling of flow boiling process in small diameter tubes

Contibutors: Mikielewicz, Dariusz (author) / Mikielewicz, Jarosław (author)

Modflow USG - the next step in mathematical modelling of underground water

Numbering: 2005, volume 51, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (301 kB)

1. TXT document (26 kB)

Contibutors: Kaluđerović, Dragan (author) / Vižintin, Goran (author)

1. PDF document (4258 kB)

Numbering: 2014, volume 61, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Learning predictive qualitative models with Padé

Contibutors: Žabkar, Jure (author) / Možina, Martin (author) / Bratko, Ivan (author) / Demšar, Janez (author)

Numbering: 2011, volume 35, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (549 kB)

CO2 temporary storage in big underground caverns

Contibutors: Likar, Jakob (author) / Žarn, Jože (author) / Grov, Eivind (author) / Marolt Čebašek, Tina (author) / Likar, Andrej (author)

1. PDF document (2463 kB)

Numbering: 2015, volume 62, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (70 kB)

Numerično modeliranje hladilnega sistema na motorju z notranjim zgorevanjem

Contibutors: Mrakovčić, Tomislav (author) / Medica, Vladimir (author) / Škifić, Nedeljko (author)

Numbering: 2004, volume 50, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (616 kB)

Numerical investigation of heat transfer on the outer surface of polymeric hollow fibers

Contibutors: Bartuli, Erik (author) / Raudensky, Miroslav (author)

1. PDF document (1679 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Realizacija dvojiškega pomnjenja v preprostih bioloških sistemih

Contibutors: Moškon, Miha (author) / Zimic, Nikolaj (author) / Mraz, Miha (author)

Multiscale modelling of heterogeneous materials

Numbering: 2016, volume 83, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (420 kB)

1. TXT document (30 kB)

Contibutors: Lamut, Martin (author) / Korelc, Jože (author) / Rodič, Tomaž (author)

Performance modelling based on value analysis for improving product development process architecture

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (523 kB)

1. TXT document (22 kB)

Contibutors: Yin, F. P. (author) / Gao, Qianying (author) / Ji, X. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (858 kB)

Matematično modeliranje hidravličnega ovna

Contibutors: Filipan, Veljko (author) / Virag, Zdravko (author) / Bergant, Anton (author)

Modelling the characteristics of an inverted magnetron using neural networks

Numbering: 2003, volume 49, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (346 kB)

1. TXT document (48 kB)

Contibutors: Belič, Igor (author)

On modelling recrystallization processes with random growth velocities of the grains in materials...

Numbering: 2009, volume 43, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (495 kB)

1. TXT document (48 kB)

Contibutors: Villa, Elena (author) / Rios, Paulo R (author)

Modeliranje ukrepov ITS v mikroskopski simulaciji

Numbering: 2012, volume 31, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (279 kB)

1. TXT document (51 kB)

Contibutors: Pretnar, Gregor (author) / Maher, Tomaž (mentor)

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo

1. PDF document (5738 kB)

1. TXT document (161 kB)

Comparison of flow characteristics of centrifugal compressors by numerical modelling of flow

Contibutors: Guzović, Zvonimir (author) / Baburić, Mario (author) / Matijašević, Dubravko (author)

1. PDF document (1290 kB)

Numbering: 2005, volume 51, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (37 kB)

Representative public administration as the modelling behaviour for the new bureaucracy

Contibutors: Pečarič, Mirko (author)

Source: Mednarodna revija za javno upravo

Numbering: 2013, volume 11, issue 1

Provider: Univerza v Ljubljani, Fakulteta za upravo
(Obvezni izvod spletne publikacije)

1. PDF document (1062 kB)

1. TXT document (96 kB)

Modeliranje fenološkega razvoja pri rastlinah

Contibutors: Črepinšek, Zalika (author) / Kajfež-Bogataj, Lučka (author)

Source: Acta agriculturae Slovenica

Numbering: 2005, volume 85, issue 2

Provider: Univerza v Ljubljani, Biotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (350 kB)

1. TXT document (55 kB)

Modeliranje zgodnje napovedi stopnje alfa-kislin pri hmelju (Humulus lupulus L.)

Contibutors: Pavlovič, Viljem (author) / Čerenak, Andreja (author) / Pavlovič, Martin (author) / Košir, Iztok Jože (author) / Rozman, Črtomir (author) / Bohanec, Marko (author)

Source: Hmeljarski bilten

Numbering: 2009, volume 16, issue 1

Provider: Inštitut za hmeljarstvo in pivovarstvo Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (285 kB)

1. TXT document (25 kB)

Modeliranje padavinskih matrik z mešanico Gaussovih funkcij

Contibutors: Klemenc, Jernej (author) / Fajdiga, Matija (author)

Latent variable mixture modelling of treated drug misuse in Ireland

Numbering: 2001, volume 47, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (720 kB)

1. TXT document (46 kB)

Contibutors: Cahill, Paul (author) / Bunting, Brendan P. (author)

The panel VAR approach to modelling the housing wealth effect

Numbering: 2004, volume 1, issue 1

Provider: Univerza v Ljubljani, Fakulteta za družbene vede
(Obvezni izvod spletne publikacije)

1. PDF document (109 kB)

1. TXT document (24 kB)

Contibutors: Čeh Časni, Anita (author) / Dumičić, Ksenija (author) / Tica, Josip (author)

Source: Naše gospodarstvo

Numbering: 2016, volume 62, issue 4

Provider: Univerza v Mariboru, Ekonomsko-poslovna fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (333 kB)

Modelling and analysis of a combined electronic and micro-mechanical system

Contibutors: Atanasijević-Kunc, Maja (author) / Kunc, Vinko (author) / Diaci, Janez (author) / Karba, Rihard (author)

Numbering: 2008, volume 54, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (277 kB)

Odour emissions from the technological processes of coal extraction in Coal mine Velenje

Contibutors: Uranjek, Gregor (author) / Zavšek, Simon (author) / Pohorec, Ivan (author) / Golob, Ludvik (author)

1. PDF document (4186 kB)

Numbering: 2013, volume 60, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Research highlights in IAS

Contibutors: Kreft, Marko (author)

Modelling of a transient-temperature field in plastics during laser cutting

Numbering: 2017, volume 36, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (130 kB)

1. TXT document (15 kB)

Contibutors: Šuba, Oldřich (author) / Sýkorová, Libuše (author) / Pata, Vladimír (author) / Kubišová, Milena (author)

1. PDF document (1286 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Zaznavanje napak in spremljanje čiščenja odpadnih voda na podlagi mehkega modela

Contibutors: Dovžan, Dejan (author) / Logar, Vito (author) / Hvala, Nadja (author) / Škrjanc, Igor (author)

Modelling a food microstructure by random sets

Numbering: 2011, volume 78, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (326 kB)

1. TXT document (20 kB)

Contibutors: Bron, Frederic (author) / Jeulin, Dominique (author)

1. PDF document (3088 kB)

Numbering: 2004, volume 23, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Modelling moving feasts determined by the islamic calendar

Contibutors: Grun-Rehomme, Michel (author) / Ben Rejeb, Amani (author)

1. PDF document (2455 kB)

Numbering: 2008, volume 5, issue 2

Provider: Univerza v Ljubljani, Fakulteta za družbene vede
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Modelling of the timeseries of GNSS coordinates and their interaction with average magnitude eart...

Contibutors: Tucikešić, Sanja (author) / Blagojević, Dragan (author)

Source: Geodetski vestnik

Numbering: 2019, volume 63, issue 4

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (3202 kB)

1. TXT document (49 kB)

Modelling of patterns and estimation of characteristic parameters

Contibutors: Borštnik, Anamarija (author) / Grabec, Igor (author) / Govekar, Edvard (author)

Finite element modelling of submerged arc welding process for a symmetric T-beam

Numbering: 2012, volume 9, issue 1

Provider: Univerza v Ljubljani, Fakulteta za družbene vede
(Obvezni izvod spletne publikacije)

1. PDF document (884 kB)

1. TXT document (29 kB)

Contibutors: Culha, Osman (author)

Cervix cancer spatial modelling for brachytherapy applicator analysis

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (256 kB)

1. TXT document (26 kB)

Contibutors: Rogelj, Peter (author) / Baraković, Muhamed (author)

Industry 4.0 and the new simulation modelling paradigm

Numbering: 2015, volume 39, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (441 kB)

1. TXT document (34 kB)

Contibutors: Rodič, Blaž (author)

Source: Organizacija (Kranj)

Numbering: 2017, volume 50, issue 3

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (973 kB)

1. TXT document (70 kB)

Genetic programming method for modelling of cup height in deep drawing process

Contibutors: Gusel, Leo (author) / Boskovic, V. (author) / Domitner, J. (author) / Ficko, Mirko (author) / Brezočnik, Miran (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (585 kB)

Development of a 3D printer for thermoplastic modelling

Contibutors: Valentan, Bogdan (author) / Pogačar, Dušan (author) / Brajlih, Tomaž (author) / Zupančič Hartner, Tjaša (author) / Pilipović, Ana (author) / Drstvenšek, Igor (author)

1. PDF document (1404 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Makrokalibracija pri hidravličnem modeliranju vodooskrbnih sistemov

Contibutors: Šantl, Sašo (author) / Steinman, Franci (mentor) / Četina, Matjaž (member of the commission for defense) / Banovec, Primož (comentor)

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo

1. PDF document (1190 kB)

1. TXT document (216 kB)

Modeliranje ponavljajoče se prevozne poti cestnega vozila

Contibutors: Kolenc, Jurij (author)

Proučevanje konstruiranja proizvodnih strojev s postopkom temelječim na modeliranju omejitev

Numbering: 2000, volume 46, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (194 kB)

1. TXT document (31 kB)

Contibutors: Matthews, Jason (author) / Singh, Baljinder (author) / Mullineux, Glen (author) / Medland, Tony (author)

Detailed mapping of the distribution of a city population based on information from the national ...

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (410 kB)

1. TXT document (54 kB)

Contibutors: Pirowski, Tomasz (author) / Bartos, Karolina (author)

Source: Geodetski vestnik

Numbering: 2018, volume 62, issue 3

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (608 kB)

1. TXT document (49 kB)

Usage of Holt-Winters model and multilayer perceptron in network traffic modelling and anomaly de...

Contibutors: Szmit, Maciej (author) / Szmit, Anna (author) / Adamus, Sławomir (author) / Bugała, Sebastian (author)

Modeliranje elektromotorjev za potrebe zaznavanja napak

Numbering: 2012, volume 36, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (778 kB)

1. TXT document (41 kB)

Contibutors: Rakar, Andrej (author) / Juričić, Đani (author)

Numbering: 2004, volume 50, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (360 kB)

Analiza orodij za podporo optimizacija procesov

Contibutors: Čuček, Tamara (author) / Šumak, Boštjan (author) / Pušnik, Maja (author)

Source: Uporabna informatika (Ljubljana)

Numbering: 2019, volume 27, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (358 kB)

1. TXT document (47 kB)

Modeliranje naključnih termomehanskih napetostno-deformacijskih stanj

Contibutors: Nagode, Marko (author) / Fajdiga, Matija (author)

Developing continuous-casting-process control based on advanced mathematical modelling

Numbering: 2006, volume 52, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (654 kB)

1. TXT document (34 kB)

Contibutors: Falkus, Jan (author) / Miłkowska-Piszczek, Katarzyna (author)

Non-linear finite-element modelling of room and pillar mine workings including the strain-softeni...

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (601 kB)

1. TXT document (48 kB)

Contibutors: Bensehamdi, Salim (author) / Seriani, Abdelbaki (author)

Source: Acta geotechnica Slovenica

Numbering: 2008, volume 5, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (653 kB)

1. TXT document (31 kB)

Modelling of water distribution under drip irrigation systems

Contibutors: Naglič, Boštjan (author) / Kechavarzi, Cedric (author) / Pintar, Marina (author)

Source: Hmeljarski bilten

Numbering: 2012, volume 19, issue 1

Provider: Inštitut za hmeljarstvo in pivovarstvo Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (368 kB)

Modelling and optimization of a laser droplet-formation process

Contibutors: Kokalj, Tadej (author) / Grabec, Igor (author) / Govekar, Edvard (author)

Modelling surface degradation in hot rolling work rolls

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (874 kB)

1. TXT document (39 kB)

Contibutors: Terčelj, Milan (author) / Fazarinc, Matevž (author) / Mrvar, Primož (author) / Žužek, Borut (author) / Fajfar, Peter (author)

1. PDF document (3045 kB)

Numbering: 2014, volume 61, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

A conceptual exploration of radicalisation

Contibutors: Richards, Julian (author)

Source: Šolsko polje

Numbering: 2018, volume 29, issue 5/6

Provider: Slovensko društvo raziskovalcev šolskega polja
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

1. TXT document (57 kB)

Vibroakustično modeliranje alternatorja

Contibutors: Furlan, Martin (author) / Rebec, Robert (author) / Černigoj, Andrej (author) / Čelič, Damjan (author) / Čermelj, Primož (author) / Boltežar, Miha (author)

Semi-automated knowledge elicitation for modelling plant defence response

Numbering: 2006, volume 52, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (634 kB)

1. TXT document (49 kB)

Contibutors: Miljković, Dragana (author)

Dvodimenzijsko modeliranje gibanja drobirskega toka v Logu pod Mangartom kot primer nenewtonske t...

Numbering: 2014, volume 38, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (91 kB)

1. TXT document (8 kB)

Contibutors: Četina, Matjaž (author) / Krzyk, Mario (author)

1. PDF document (1496 kB)

Numbering: 2003, volume 49, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (46 kB)

Modeliranje sestavov kovine in elastomerov z uporabo postopka končnih elementov

Contibutors: Floody, Sergio E. (author) / Arenas, Jorge, P. (author) / de Espindola, Jose J. (author)

Numbering: 2007, volume 53, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (288 kB)

Does accession to European Union substantially change the economic situation in Croation agriculure

Contibutors: Rednak, Miroslav (author) / Volk, Tina (author) / Erjavec, Emil (author)

Source: Agricultura (Maribor)

Numbering: 2012, volume 9, issue 1/2

Provider: Univerza v Mariboru, Fakulteta za kmetijstvo
(Obvezni izvod spletne publikacije)

1. PDF document (397 kB)

Modelling and simulation of a neurophysiological experiment by spatio-temporal point processes

Contibutors: Beneš, Viktor (author) / Frcalová, Blažena (author)

Numbering: 2008, volume 27, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (317 kB)

Topmost steel production design based on through process modelling with artificial neural networks

Contibutors: Kodelja, Tadej (author) / Grešovnik, Igor (author) / Vertnik, Robert (author) / Šarler, Božidar (author)

Modelling the position of cell profiles allowing for both inhomegeneity and interaction

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (344 kB)

1. TXT document (26 kB)

Contibutors: Stougaard Nielsen, Linda (author)

Prostorska porazdelitev faktorja ugodja na temelju numeričnega modeliranja naravne konvekcije

Numbering: 2000, volume 19, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (579 kB)

1. TXT document (17 kB)

Contibutors: Glavnik, Aleš (author) / Hriberšek, Matjaž (author) / Škerget, Leopold (author)

A new method for mathematical and simulation modelling interactivity: A case study in flexible jo...

Numbering: 2002, volume 48, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (524 kB)

1. TXT document (50 kB)

Contibutors: Ojsteršek, Robert (author) / Lalic, Danijela (author) / Buchmeister, Borut (author)

Source: Advances in production engineering and management

Numbering: 2019, volume 14, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1462 kB)

1. TXT document (47 kB)

Application of microsimulation to the modelling of epidemics and terrorist attacks

Contibutors: Piper, Ian (author) / Keep, Daniel (author) / Western, Craig (author) / Green, Tony (author) / Zhang, Ivy (author)

Numbering: 2010, volume 34, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (360 kB)

Modelling the neolithic dispersal in northern Eurasia

Contibutors: Dolukhanov, Pavel (author) / Shukurov, Anvar (author)

Source: Documenta Praehistorica

Numbering: 2004, volume 31, issue 31

Provider: Univerza v Ljubljani, Filozofska fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (1400 kB)

1. TXT document (52 kB)

Mathematical modelling and physical simulation of the hot plastic deformation and recrystallizati...

Contibutors: Kalinowska-Ozgowicz, Elżbieta (author) / Wajda, Wojciech (author) / Ozgowicz, Wojciech (author)

Mixture modelling of DSM-IV-TR paranoid personality disorder criteria in a general population sample

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (578 kB)

1. TXT document (23 kB)

Contibutors: Devine, Sharon (author) / Bunting, Brendan P. (author) / McCann, Siobhan (author) / Murphy, Sam (author)

Numbering: 2008, volume 5, issue 1

Provider: Univerza v Ljubljani, Fakulteta za družbene vede
(Obvezni izvod spletne publikacije)

1. PDF document (232 kB)

Optično in električno modeliranje elektrokemijskih sončnih celic

Contibutors: Berginc, Marko (author) / Filipič, Miha (author) / Lipovšek, Benjamin (author) / Čampa, Andrej (author)

Numbering: 2013, volume 80, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (640 kB)

Ekološke značilnosti habitatov in potencialna razširjenost izbranih kvalifikacijskih gozdnih vrst...

Contibutors: Vrezec, Al (author, photographer) / De Groot, Maarten (author) / Kobler, Andrej (author) / Ambrožič, Špela (author) / Kapla, Andrej (author)

Source: Gozdarski vestnik

Numbering: 2014, volume 72, issue 10

Provider: Zveza gozdarskih društev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (613 kB)

1. TXT document (70 kB)

Modificirano numerično modeliranje lomnega vedenja zvarnega spoja v prehodnem področju iz duktiln...

Contibutors: Kozak, Dražan (author) / Gubeljak, Nenad (author) / Rak, Inoslav (author)

Source: Kovine zlitine tehnologije

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (167 kB)

Modelno vrednotenje preusmeritve dejavnosti kmetij

Contibutors: Pavlovič, Martin (author) / Udovč, Andrej (author) / Rajkovič, Uroš (author) / Rozman, Črtomir (author) / Nikoloski, Trajče (author)

Source: Hmeljarski bilten

Numbering: 2017, issue 24

Provider: Inštitut za hmeljarstvo in pivovarstvo Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (601 kB)

1. TXT document (27 kB)

An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibi...

Contibutors: Puškar, Tatjana M. (author) / Jevremović, Danimir P. (author) / Budak, Igor (author) / Vukelić, Djordje (author) / Kojić, Vesna (author) / Eggbeer, Dominic (author) / Williams, Robert J. (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (698 kB)

Physical and numerical modelling of a non-stationary steel flow through a subentry shroud with an...

Contibutors: Michalek, Karel (author) / Tkadlečková, Markéta (author) / Gryc, Karel (author) / Cupek, Jiří (author) / Macura, Michal (author)

1. PDF document (2585 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Processing poly(ether etherketone) an a 3D printer for thermoplastic modelling

Contibutors: Valentan, Bogdan (author) / Kadivnik, Žiga (author) / Brajlih, Tomaž (author) / Anderson, Andy (author) / Drstvenšek, Igor (author)

1. PDF document (2150 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The nano-wetting aspect at the liquid-metal/sic interface

Contibutors: Mihailović, Marija (author) / Raić, Karlo (author) / Patarić, Aleksandra (author) / Volkov Husović, Tatjana (author)

The development of a "drive-in" filters dewatering system in the Velenje coal mine using finite-e...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (252 kB)

1. TXT document (18 kB)

Contibutors: Vižintin, Goran (author) / Veselič, Miran (author) / Bombač, Andrej (author) / Dervarič, Evgen (author) / Likar, Jakob (author) / Vukelič, Željko (author)

Source: Acta geotechnica Slovenica

Numbering: 2009, volume 6, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (607 kB)

Modelling of the directional solidification of a leaded red brass flange

Contibutors: Grozdanić, Vladimir (author)

Material and technological modelling of closed-die forging

Numbering: 2011, volume 45, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

1. TXT document (20 kB)

Contibutors: Vorel, Ivan (author) / Jeníček, Štěpán (author) / Jirková, Hana (author) / Mašek, Bohuslav (author)

1. PDF document (1107 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Numerično modeliranje notranjih zvokov v železniških vozilih

Contibutors: Bazaras, Jonas (author) / Bazaras, Žilvinas (author) / Sapragonas, Jonas (author)

Modelling of the solidification process and the chemical heterogeneity of a 26NiCrMoV115 steel ingot

Numbering: 2007, volume 53, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (430 kB)

1. TXT document (24 kB)

Contibutors: Balcar, Martin (author) / Železný, Rudolf (author) / Martínek, Ludvík (author) / Fila, Pavel (author) / Bažan, Jiří (author)

Numbering: 2007, volume 41, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (734 kB)

Modeliranje in analiza dinamike ščetke elektromotorja

Contibutors: Slavič, Janko (author) / Nastran, Miha (author) / Boltežar, Miha (author)

Research of thermal processes for the continuous casting of steel

Numbering: 2006, volume 52, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (247 kB)

1. TXT document (38 kB)

Contibutors: Velicka, Marek (author) / Dittel, David (author) / Pyszko, René (author) / Příhoda, Miroslav (author) / Vaculik, Miroslav (author) / Fojtik, Pavel (author) / Burda, Jiri (author)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (538 kB)

1. TXT document (16 kB)

Hypothetical art and art education

Contibutors: Selan, Jurij (author)

Source: CEPS journal

Numbering: 2011, volume 1, issue 2

Provider: Univerza v Ljubljani, Pedagoška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (203 kB)

Numerical study of heat-transfer enhancement of homogeneous water-Au nanofluid under natural conv...

Contibutors: Ternik, Primož (author) / Rudolf, Rebeka (author) / Žunič, Zoran (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (310 kB)

Modelling overvoltage protection components

Contibutors: Hodžić, Mujo (author) / Mujčić, Aljo (author) / Suljanović, Nermin (author) / Zajc, Matej (author)

Source: Informacije MIDEM

Numbering: 2017, volume 47, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1561 kB)

1. TXT document (44 kB)

Modeliranje realnih omrežij avtonomnih sistemov

Contibutors: Vilhar, Andrej (author) / Novak, Roman (author) / Kandus, Gorazd (author)

Modelling of an information society in transition - Slovenia's position in the CE countries

Numbering: 2007, volume 74, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (195 kB)

1. TXT document (34 kB)

Contibutors: Krisper, Marjan (author) / Zrimec, Tatjana (author)

A study of key factors for energy policy modelling

Numbering: 1999, volume 23, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (703 kB)

1. TXT document (18 kB)

Contibutors: Obrecht, Matevž (author) / Denac, Matjaž (author)

Source: Naše gospodarstvo

Numbering: 2012, volume 58, issue 3/4

Provider: Univerza v Mariboru, Ekonomsko-poslovna fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (403 kB)

Modelling legal acts by means of expert systems, ECA rules and high-level Petri nets

Contibutors: Berčič, Boštjan (author)

Določanje raztrosa potresnega odziva armiranobetonskih stavb

Numbering: 2003, volume 27, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

1. TXT document (38 kB)

Contibutors: Kosič, Mirko (author) / Fajfar, Peter (mentor) / Mikoš, Matjaž (member of the commission for defense) / Peruš, Iztok (member of the commission for defense) / Turk, Goran (member of the commission for defense) / Čaušević, Mehmed (member of the commission for defense)

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo

1. PDF document (8145 kB)

1. TXT document (647 kB)

The development of a chill mould for tool steels using numerical modelling

Contibutors: Balcar, Martin (author) / Železný, Rudolf (author) / Sochor, Libor (author) / Fila, Pavel (author) / Martínek, Ludvík (author)

Multiscale modelling of short cracks in random polycrystalline aggregates

Numbering: 2008, volume 42, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (290 kB)

1. TXT document (22 kB)

Contibutors: Cizelj, Leon (author) / Simonovski, Igor (author)

Data preparation for groundwater modelling - Ljubljansko polje aquifer system

Numbering: 2007, volume 41, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (239 kB)

1. TXT document (17 kB)

Contibutors: Vrzel, Janja (author) / Ogrinc, Nives (author) / Vižintin, Goran (author)

1. PDF document (1128 kB)

Numbering: 2015, volume 62, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

The modelling of manpower by Markov chains - a case study of the Slovenian armed forces

Contibutors: Škulj, Damjan (author) / Vehovar, Vasja (author) / Štamfelj, Darko (author)

Additive manufacturing: the future of manufacturing

Numbering: 2008, volume 32, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (148 kB)

1. TXT document (46 kB)

Contibutors: Adekanye, Sheriff Adefemi (author) / Mahamood, Rasheedat Modupe (author) / Akinlabi, Esther T. (author) / Owolabi, Moses Gbadebo (author)