dLib.si - razvoj

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Development of microstructure of steel for thermal power generation

Contibutors: Kvackaj, Tibor (author) / Kuskulic, T. (author) / Fujda, M. (author) / Pokorny, I. (author) / Weiss, M. (author) / Bevilaqua, T. (author)

Numbering: 2007, volume 41, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

Razvoj modificirane metode za določevanje lomne žilavosti hitroreznega jekla, s cilindričnimi pre...

Contibutors: Leskovšek, V. (author) / Ule, B. (author) / Rodič, Alenka (author)

1. PDF document (1695 kB)

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. TXT document (40 kB)

Razvoj postopka iztiskavanja kompozitov Al/SiC

Contibutors: Šuštaršič, Borivoj (author) / Doberšek, Mirko (author) / Breskvar, Bojan (author) / Torkar, Matjaž (author) / Kevorkijan, Varužan (author) / Dai, Sudradjat (author) / Smolej, Anton (author) / Nardin, Vladimir (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (492 kB)

Development of low-Si aluminum casting alloys with an improved thermal conductivity

Contibutors: Shin, Jesik (author) / Ko, Sehyun (author) / Kim, Kitae (author)

Effect of an electromagnetic field on the microstructure and properties of Cr(Ti)AlN hard coating...

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (392 kB)

1. TXT document (36 kB)

Contibutors: Wang, Jin (author) / Ma, Dayan (author) / Liu, Qi (author) / Jin, Yetang (author) / Wang, Xu (author)

1. PDF document (1675 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the foaming precursor's composition and density on the foaming efficiency, microstru...

Contibutors: Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Paulin, Irena (author) / Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Lažeta, Marjana (author)

Numbering: 2011, volume 45, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (373 kB)

Inštitut za kovinske materiale in tehnologije, Ljubljana - 50 let razvoja in raziskovanja

Contibutors: Vodopivec, Franc (author) / Breskvar, Bojan (author) / Jenko, Monika (author)

1. PDF document (1021 kB)

Numbering: 2003, volume 37, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (97 kB)

Razvoj nove tehnologije "HKL" za litje drobnih palic nekonvencionalnih presekov

Contibutors: Rodič, Jože (author) / Habijan, K. (author) / Rodič, Alenka (author)

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (654 kB)

Microstructure evolution and fracture analysis of hot-rolled explosive-welded 06Cr13/Q345R compos...

Contibutors: Li, Huaying (author) / Zhao, Guanghui (author) / Li, Juan (author) / Ma, Lifeng (author) / Huang, Qingxue (author) / Li, Yugui (author)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (11 MB)

Possibilities and perspectives for development of metallurgy in the Republic of Macedonia (1997, volume 31, issue 6)

Contibutors: Mickovski, Jovan K. (author) / Nacevski, Nikola (author) / Nikov, B. (author) / Milosevski, S. (author)

1. PDF document (1206 kB)

Provider: Narodna in univerzitetna knjižnica

Hot tensile testing of SAF 2205 duplex stainless steel

Contibutors: Tehovnik, Franc (author) / Žužek, Borut (author) / Burja, Jaka (author)

1. PDF document (1303 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Razvoj indukcijsko segrevane laboratorijske peči za toplotno obdelavo v zvrtinčeni plasti

Contibutors: Leskovšek, Vojteh (author) / Paulin, Andrej (author) / Kolenko, Tomaž (author)

1. PDF document (1190 kB)

Numbering: 1994, volume 28, issue 3

Provider: Narodna in univerzitetna knjižnica

Development of composite salt cores for foundry applications

Contibutors: Beňo, Jaroslav (author) / Adámková, Eliška (author) / Mikšovský, František (author) / Jelínek, Petr (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (414 kB)

Razvoj male suhe vakuumske črpalke - kompresorja za območje 100 mbar do 4 bar (1996, volume 30, issue 1/2)

Contibutors: Sivec, Matjaž (author) / Drab, Marjan (author) / Cerar, Matija (author) / Pregelj, Andrej (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (415 kB)

Tailoring the microstructure of ZnO-based ceramics

Contibutors: Bernik, Slavko (author) / Podlogar, Matejka (author) / Daneu, Nina (author) / Rečnik, Aleksander (author)

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (349 kB)

Development of Fe-Si-B powders for soft-magnetic application

Contibutors: Godec, Matjaž (author) / Mandrino, Djordje (author) / Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Prešern, Vasilij (author)

Razvoj visokovakuumske oljne difuzijske frakcionirne črpalke s premerom sesalne odprtine 650 mm (1995, volume 29, issue 3/4)

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (776 kB)

1. TXT document (18 kB)

Contibutors: Gasperič, Jože (author) / Sulčič, Slavko (author) / Drab, Marjan (author) / Pregelj, Andrej (author)

1. PDF document (1150 kB)

Provider: Inštitut za kovinske materiale in tehnologije

Recent advances in synthesis of monosubstituted acetylene polymers (1997, volume 31, issue 6)

Contibutors: Vohlídal, Jiří (author) / Sedláček, Jan (author) / Žigon, Majda (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (961 kB)

Jeklo po letu 2000

Contibutors: Vodopivec, Franc (author)

1. PDF document (1243 kB)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. TXT document (31 kB)

Razvoj modela ohlajanja na hladilni liniji štekla

Contibutors: Kokošar, Janko (author)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (86 kB)

The selection and development of tribological coatings

Contibutors: Kharlamov, Yuriy (author) / Dal, Vladimir (author) / Mamuzić, Ilija (author) / Lopata, Larysa (author) / Pisarenko, Georgij Stepanovič (author)

Numbering: 2010, volume 44, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (144 kB)

Razvoj vibracijskih miz za vgradnjo betona v kalupe

Contibutors: Čop, Rudi (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (52 kB)

Razvojne usmeritve podjetja Salonit Anhovo, d.d.

Contibutors: Ljubič-Mlakar, Tanja (author) / Reščič, Lojzka (author) / Pešič, Tatjana (author) / Terčič, Žarko (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (114 kB)

Razvoj modela širjenja med toplim prostim kovanjem

Contibutors: Knap, Matjaž (author) / Kugler, Goran (author) / Terčelj, Milan (author) / Turk, Radomir (author) / Nzobandora, Celestin (author) / Palkowski, Heinz (author)

Numbering: 2004, volume 38, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (447 kB)

Microstructure evolution and damping characteristics in cast Mg-Al-Si alloys

Contibutors: Chen, Shuqun (author) / Dong, Xuanpu (author)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

The extraction of raw materials for the cement industry and nature conservation

Contibutors: Pogačnik, Željko (author) / Stupar, Martina (author)

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (204 kB)

Chemically controlled sintering and microstructural development in ceramics (1997, volume 31, issue 6)

Contibutors: Kolar, Drago (author)

1. PDF document (1504 kB)

Provider: Narodna in univerzitetna knjižnica

1. TXT document (32 kB)

Water-soluble cores - verifying development trends

Contibutors: Adámková, Eliška (author) / Jelínek, Petr (author) / Beňo, Jaroslav (author) / Mikšovský, František (author)

1. PDF document (1084 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructural evolution during the transient liquid-phase bonding of dissimilar nickel-based su...

Contibutors: Ghomi, Meysam Khakian (author) / Nategh, Saeid (author) / Mirdamadi, Shamsoddin (author)

1. PDF document (2045 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Razvoj superplastične zlitine AlZnMgCu

Contibutors: Smolej, Anton (author) / Gnamuš, M. (author) / Vehovar, S. (author)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (799 kB)

Development of a 3D printer for thermoplastic modelling

Contibutors: Valentan, Bogdan (author) / Pogačar, Dušan (author) / Brajlih, Tomaž (author) / Zupančič Hartner, Tjaša (author) / Pilipović, Ana (author) / Drstvenšek, Igor (author)

1. PDF document (1404 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The development of new types of secondary protection for concrete structures exposed to extreme c...

Contibutors: Dufka, Ámos (author) / Melichar, Tomáš (author) / Bydžovský, Jiří (author) / Vaněrek, Jan (author)

1. PDF document (2780 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Developing and testing a new type-8K mould for tool-steel ingot casting

Contibutors: Balcar, Martin (author) / Sochor, Libor (author) / Železný, Rudolf (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Kraus, Libor (author) / Kešner, Dušan (author) / Bažan, Jiří (author)

Development of microstructure during the hot plastic deformation of high clean steels for power p...

Numbering: 2008, volume 42, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (387 kB)

1. TXT document (18 kB)

Contibutors: Kuskulic, Tomas (author) / Kvackaj, Tibor (author) / Fujda, M. (author) / Pokorny, I. (author) / Bacsó, J. (author) / Molnarova, M. (author) / Kocisko, R. (author) / Weiss, Michael (author) / Bevilaqua, Tomas (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (255 kB)

Smeri razvoja na področju polimernih materialov

Contibutors: Malavašič, Tatjana (author)

Developing continuous-casting-process control based on advanced mathematical modelling

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (848 kB)

1. TXT document (21 kB)

Contibutors: Falkus, Jan (author) / Miłkowska-Piszczek, Katarzyna (author)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (601 kB)

1. TXT document (48 kB)

Razvoj sodobnih zlitin aluminija

Contibutors: Smolej, Anton (author)

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (979 kB)

Razvoj in preiskava domačih kompleksnih cepiv za sivo litino z lamelastim grafitom

Contibutors: Uršič, Vito (author) / Surina, I. (author) / Semenič, S. (author) / Tonkovič-Prijanovič, Marica (author)

Razvoj postopkov pridobivanja kompozitov na osnovi zlitin Al, diskontinuirano ojačanih s kemijsko... (1997, volume 31, issue 3/4)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (598 kB)

1. TXT document (12 kB)

Contibutors: Kevorkijan, Varužan (author)

1. PDF document (1388 kB)

Provider: Narodna in univerzitetna knjižnica

Razvoj mikrostrukture v grobozrnati korundni keramiki (1995, volume 29, issue 1/2)

Contibutors: Šventner-Kosmos, Alenka (author) / Irmančnik-Belič, Lidija (author) / Sušnik, Dimitrij (author) / Kolar, Drago (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (430 kB)

Razvoj in značilnosti grobozrnate korundne keramike

Contibutors: Šventner-Kosmos, Alenka (author) / Samardžija, Zoran (author) / Sušnik, Dimitrij (author) / Kolar, Drago (author)

Razvoj in pomen tribologije doma in v svetu

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (450 kB)

1. TXT document (10 kB)

Contibutors: Vižintin, Jože (author)

1. PDF document (1084 kB)

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

Influence of the cooling rate on the microstructure development of the EN AW-AlMg4.5Mn0.7 alloy

Contibutors: Dolić, Natalija (author) / Medved, Jože (author) / Mrvar, Primož (author) / Unkić, Faruk (author)

1. PDF document (3494 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Microstructure development of the Ni-GDC anode material for IT-SOFC

Contibutors: Zupan, Klementina (author) / Marinšek, Marjan (author)

Razvoj in optimizacija postopka izdelave zaslonov z luminiforom P-53

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (472 kB)

1. TXT document (27 kB)

Contibutors: Županc Mežnar, Lea (author)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (470 kB)

Development and characterization of metal-dopant-based zirconia nanofibres via an electrospinning...

Contibutors: Jeeva Thomas, Mary (author) / Judes, John (author)

1. PDF document (2671 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Development of numerical models for the heat-treatment-process optimisation in a closed-die forgi...

Contibutors: Maleček, Ladislav (author) / Fedorko, Mikuláš (author) / Vančura, Filip (author) / Jirková, Hana (author) / Mašek, Bohuslav (author)

1. PDF document (1395 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the working technology on the development of alloys H13-w(Cu) 87.5 %

Contibutors: Artiček, Uroš (author) / Bojinović, Marko (author) / Brunčko, Mihael (author) / Anžel, Ivan (author)

1. PDF document (3355 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Predicting the microstructure evolution for the warm skew rolling of bearing steel balls under di...

Contibutors: Huo, Yuanming (author) / He, Tao (author) / Hu, Yujia (author) / Shen, Menglan (author) / Sun, Bo (author) / Zhao, Tong (author)

1. PDF document (4072 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure and property evolution of the 1538MV non-quenched and tempered steel for a cranksh...

Contibutors: Yong, Yang (author) / Zhou, Le-yu (author) / Fu, Dian-yu (author) / Jiang, Peng (author) / Ren, Xueping (author)

1. PDF document (2888 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Razvoj metod za analizo redkih zemelj v zlitinah s posebnimi lastnostmi

Contibutors: Renko, M. (author) / Osojnik, Andreja (author)

Development of aluminium alloys for aerosol cans

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (565 kB)

1. TXT document (12 kB)

Contibutors: Kores, Stanislav (author) / Turk, Jože (author) / Medved, Jože (author) / Vončina, Maja (author)

1. PDF document (1645 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental analysis of the influence of concrete curing on the development of its elastic modul...

Contibutors: Kocáb, Dalibor (author) / Králíková, Monika (author) / Cikrle, Petr (author) / Misák, Petr (author) / Kucharczyková, Barbara (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (788 kB)

1. TXT document (42 kB)

Razvoj jekel za ladijske verige

Contibutors: Legat, Franc (author)

Numbering: 1994, volume 28, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (335 kB)

Razvoj biokompatibilnih implantatov (1996, volume 30, issue 5)

Contibutors: Torkar, Matjaž (author) / Vehovar, Leopold (author) / Bajt Leban, Mirjam (author) / Rjazancev, Boris (author)

Razvoj novih poliolefinskih materialov na podlagi metalocenskih katalizatorjev (1997, volume 31, issue 3/4)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (434 kB)

1. TXT document (10 kB)

Contibutors: Musil, Vojko (author)

Cellular automata simulation of the dynamic recrystallization of the TC4 alloy during hot compres...

Provider: Narodna in univerzitetna knjižnica

1. PDF document (818 kB)

1. TXT document (18 kB)

Contibutors: Han, Fei (author) / Wang, Yun (author) / Chen, Rongquan (author) / Gao, Qi (author) / Wang, Yongqiang (author)

1. PDF document (2734 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Development of a model for the internet portal "strength of materials"

Contibutors: Globa, Larisa (author) / Novogrudska, Rina (author) / Mamuzić, Ilija (author)

Microstructural evolution of Inconel 625 during hot rolling

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (415 kB)

1. TXT document (13 kB)

Contibutors: Tehovnik, Franc (author) / Burja, Jaka (author) / Podgornik, Bojan (author) / Godec, Matjaž (author) / Vode, Franci (author)

1. PDF document (3704 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Evolution in electrochemical performance of Co(OH)sub2 electrodeposited on nickel foam as high-pe...

Contibutors: Lu, Zhongjie (author) / Jun, Li (author) / Jia, Wanli (author) / Jiang, Yunqiang (author) / Juan, Yongfei (author)

1. PDF document (3500 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Smeri razvoja električnih pogonskih motorjev

Contibutors: Fišer, Rastko (author) / Makuc, Danilo (author)

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (251 kB)

Uporaba instrumentiranega Charpyja pri razvoju jekel

Contibutors: Dobi, Đorđe (author)

Development of foundry cores based on inorganic salts

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (865 kB)

1. TXT document (14 kB)

Contibutors: Jelínek, Petr (author) / Mikšovský, František (author) / Beňo, Jaroslav (author) / Adámková, Eliška (author)

1. PDF document (1030 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Razvoj postopkov izdelave Al/SiC kompozitov (1996, volume 30, issue 3/4)

Contibutors: Šuštaršič, Borivoj (author) / Kevorkijan, Varužan (author) / Lamut, Jakob (author)

1. PDF document (1811 kB)

Provider: Narodna in univerzitetna knjižnica

1. TXT document (34 kB)

The development of a chill mould for tool steels using numerical modelling

Contibutors: Balcar, Martin (author) / Železný, Rudolf (author) / Sochor, Libor (author) / Fila, Pavel (author) / Martínek, Ludvík (author)

Numbering: 2008, volume 42, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (290 kB)

Razvoj in uporabnost domačih kompleksnih cepiv za sivo litino z lamelastim grafitom (1995, volume 29, issue 1/2)

Contibutors: Uršič, Vito (author) / Surina, I. (author) / Semenič, S. (author) / Tonkovič-Prijanovič, Marica (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (588 kB)

Microstructure evolution and statistical analysis of Al/Cu friction-stir spot welds

Contibutors: Mubiayi, Mukuna Patrick (author) / Akinlabi, Esther T. (author) / Makhatha, Mamookho Elizabeth (author) / Gadeev, Dmitry (author)

1. PDF document (1864 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Razvoj in uvajanje visokotrdnih drobnozrnatih mikrolegiranih jekel za uporabo v procesni industri...

Contibutors: Vojvodič-Tuma, Jelena (author) / Ule, Boris (author) / Ažman, S. (author)

Razvoj vakuumske transferne tehnike za serijsko procesiranje kanalnih fotopomnoževalk

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (654 kB)

1. TXT document (13 kB)

Contibutors: Erjavec, Bojan (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

Evolution of the microstructure and magnetic properties of a cobalt-silicon-based alloy in the ea...

Contibutors: Rattanasakulthong, Watcharee (author) / Sirisathitkul, Chitnarong (author) / Rogl, Peter Franz (author)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (445 kB)

Microstructure evolution in SrTiO3 with different Sr/Ti ratios

Contibutors: Šturm, Sašo (author) / Rečnik, Aleksander (author) / Čeh, Miran (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (344 kB)

Role of tool rotational speed in influencing microstructural evolution, residual-stress formation...

Contibutors: Sevvel, Pandian (author) / Satheesh, Chidambaram (author)

1. PDF document (2872 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure evolution of advanced high-strength trip-aided bainitic steel

Contibutors: Grajcar, Adam (author)

1. PDF document (2998 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Razvoj tehnologije izdelave nerjavnih jekel, bogatih z dušikom

Contibutors: Koroušić, Blaženko (author) / Triplat, Jožef (author) / Tehovnik, Franc (author) / Arh, Boštjan (author)

Razvojna dejavnost v steklarski industriji (1996, volume 30, issue 3/4)

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (218 kB)

1. TXT document (27 kB)

Contibutors: Binder, Stojan (author)

Razvoj tehnologije izdelave nerjavnih jekel v Železarni Jesenice od leta 1984 naprej

Provider: Narodna in univerzitetna knjižnica

1. PDF document (562 kB)

1. TXT document (13 kB)

Contibutors: Triplat, Jože (author)

Razvoj programske opreme za procesno vodenje potisne peči z vidika energetskega optimiranja

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (537 kB)

1. TXT document (14 kB)

Contibutors: Kolenko, Tomaž (author) / Pavlin, F. (author) / Sicherl, B. (author) / Glogovac, B. (author)

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (458 kB)

Development of the production of ultrafine-grained titanium with the Conform equipment

Contibutors: Dlouhy, Jaromir (author) / Duchek, Michal (author) / Kubina, Tomáš (author) / Hodek, Josef (author)

1. PDF document (1125 kB)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Phase and microstructure development of LSCM perovskite materials for SOFC anodes prepared by the...

Contibutors: Zupan, Klementina (author) / Marinšek, Marjan (author) / Skalar, Tina (author)

Razvoj in problematika mikrolegiranih jekel za petrokemično industrijo

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (934 kB)

1. TXT document (31 kB)

Contibutors: Ažman, Slavko (author)

1. PDF document (1088 kB)

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. TXT document (19 kB)

Razvoj superferitnega nerjavnega jekla

Contibutors: Smajić, Nijaz (author)

Smeri razvoja novih materialov na podlagi polimernih mešanic in zlitin

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (489 kB)

1. TXT document (14 kB)

Contibutors: Musil, Vojko (author)

Numbering: 1994, volume 28, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (521 kB)

Application of a molecular dynamics simulation and an ab-initio calculation in composite material...

Contibutors: Yao, Li (author) / Feng, Qi (author)

Uporaba nevronskih mrež in statističnih metod pri razvoju premaznih sredstev

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (580 kB)

1. TXT document (50 kB)

Contibutors: Leskovšek, Nevenka (author) / Tušar, Livija (author) / Tušar, Marjan (author) / Zupan, Jure (author)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (721 kB)

Microstructural evolution and mechanical characterizations of Al-TiC matrix composites produced v...

Contibutors: Abegunde, Oluwatosin Olayinka (author) / Akinlabi, Esther T. (author) / Madyira, Daniel (author)

1. PDF document (2244 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Development of a heat treatment for increasing the mechanical properties and stress corrosion res...

Contibutors: Shakouri, Mehdi (author) / Shabestari, Saeed (author)

1. PDF document (1053 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Razvoj domače proizvodnje stelitnih zlitin

Contibutors: Rodič, Jože (author) / Habijan, K. (author) / Strohmaier, M. (author) / Dolenc, J. (author) / Jagodic, A. (author) / Sikošek, D. (author) / Rodič, Alenka (author) / Osojnik, Andreja (author) / Klofutar, J. (author)

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (490 kB)

Effects of cyclic expansion-extrusion with an Asymmetrical extrusion cavity (CEE-AEC) on the micr...

Contibutors: Fan, Hongzhi (author) / Yan, Zhaoming (author) / Zhang, Zhiming (author) / Wang, Qiang (author) / Xu, Jian (author) / Xue, Yong (author)

1. PDF document (7619 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of cooling methods on the microstructure evolution of the carburized layer in 18CNiMo7-...

Contibutors: An, Xiao-xue (author) / Tian, Yong (author) / Wang, Hao-jie (author) / Wang, Zhao-dong (author)

1. PDF document (1728 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructural evolution and materials flow in butt cold welding of copper

Contibutors: Huang, Yong (author) / Yan, Xiao-Juan (author) / Ran, Xiao-Long (author)

1. PDF document (4519 kB)

Numbering: 2020, volume 54, iss. 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Mechanical behavior and microstructure evolution of Ti-6Al-4V wire rod for producing aerospace fa...

Contibutors: Hu, Yujia (author) / Huo, Yuanming (author) / He, Tao (author) / Xue, Yong (author) / Yang, Wanbo (author) / Shen, Menglan (author)

1. PDF document (2871 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Void-closure behavior and a new void-evolution model for various stress states

Contibutors: Chen, Fei (author) / Zhao, Xiaodong (author) / Chen, Huiqin (author) / Ren, Jinyu (author)

1. PDF document (3487 kB)

Numbering: 2021, volume 55, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Effects of the temperature on the pore evolution during sintering of the belite-sulfoaluminate ce...

Contibutors: Dolenec, Sabina (author) / Korat, Lidija (author) / Borštnar, Maruša (author) / Ipavec, Andrej (author) / Žibret, Lea (author)

1. PDF document (2318 kB)

Numbering: 2020, volume 54, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure evolution in SAF 2507 super duplex stainless steel

Contibutors: Tehovnik, Franc (author) / Arzenšek, Boris (author) / Arh, Boštjan (author) / Skobir Balantič, Danijela Anica (author) / Pirnar, Boštjan (author) / Žužek, Borut (author)

Numbering: 2011, volume 45, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (763 kB)

Void evolution behavior and closure criterion inside large shaft forgings during a forging process

Contibutors: Jiao, Yongxing (author) / Zhou, Cunlong (author) / Liu, Jiansheng (author) / Zhang, Xuezhong (author) / He, Wenwu (author)

1. PDF document (2456 kB)

Numbering: 2021, volume 55, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mechanical behavior and microstructure evolution of the Ti-3Al-5Mo-4.5V alloy at an elevated defo...

Contibutors: Shen, Menglan (author) / Huo, Yuanming (author) / He, Tao (author) / Xue, Yong (author) / Hu, Yujia (author) / Yang, Wanbo (author)

1. PDF document (4444 kB)

Numbering: 2021, volume 55, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure evolution of in situ composite coatings fabricated by laser caldding with differen...

Contibutors: Zhang, Youfeng (author) / Han, Guangyu (author) / He, Shasha (author) / Yang, Wanwan (author)

1. PDF document (2857 kB)

Numbering: 2021, volume 55, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Hot deformation behavior and processing map of a Mg-Gd-Y-Zn-Zr alloy

Contibutors: Yan, Zhaoming (author) / Zhu, Jiaxuan (author) / Zhang, Zhimin (author) / Wang, Qiang (author) / Xue, Yong (author)

1. PDF document (5688 kB)

Numbering: 2021, volume 55, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure evolution of corrugated interface 304/Q345R rolling-composite plate

Contibutors: Zhao, Guanghui (author) / Zhang, Ruifeng (author) / Li, Juan (author) / Li, Huaying (author) / Liu, Haitao (author) / Ma, Lifeng (author)

1. PDF document (4804 kB)

Numbering: 2022, volume 56, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)