dLib.si - mikrostruktura

1. PDF document (1385 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Študij notranje oksidacije v naogljičenih hitrostrjenih trakovih Cu

Contibutors: Rudolf, Rebeka (author) / Kosec, Ladislav (author) / Anžel, Ivan (author) / Gusel, Leo (author) / Poharc, Mojmir (author)

Numbering: 2007, volume 41, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (548 kB)

O deformacijski odpornosti jekel po uporabi v visokotlačnem parnem kotlu (1997, volume 31, issue 5)

Contibutors: Vodopivec, Franc (author) / Ule, Boris (author) / Žvokelj, Janez (author)

1. PDF document (1649 kB)

Provider: Narodna in univerzitetna knjižnica

1. TXT document (33 kB)

Raziskave vgrajevanja Pbzgoraj(2+) v keramiko na osnovi trdnih raztopin Baspodaj(6-x)Ndspodaj(8+2... (1997, volume 31, issue 1/2)

Contibutors: Podlipnik, Mojca (author) / Valant, Matjaž (author) / Suvorov, Danilo (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (734 kB)

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidi...

Contibutors: Yi, Xiaojie (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Xu, Yajun (author) / Mahamane Sani, Abdou Yahouza (author)

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Characteristics of SnO2 doped ZnO-Bi2O3 ceramics

Contibutors: Daneu, Nina (author) / Bernik, Slavko (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (894 kB)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Development of microstructure of steel for thermal power generation

Contibutors: Kvackaj, Tibor (author) / Kuskulic, T. (author) / Fujda, M. (author) / Pokorny, I. (author) / Weiss, M. (author) / Bevilaqua, T. (author)

Lasersko kaljenje s pretaljevanjem površinske plasti sive in nodularne litine (1996, volume 30, issue 3/4)

Numbering: 2007, volume 41, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

1. TXT document (11 kB)

Contibutors: Grum, Janez (author) / Šturm, Roman (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (744 kB)

Razpad alfa-AlB12 v zlitinah Al-B in Al-Ti-B

Contibutors: Zupanič, Franc (author) / Spaić, Savo (author) / Križman, Alojz (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (192 kB)

Effect of copper element on hot behaviour of 304L stainless steel

Contibutors: Li, Juan (author) / Zhao, Guanghui (author) / Ma, Lifeng (author) / Chen, Huiqin (author) / Li, Huaying (author) / Zhang, Wei (author)

1. PDF document (3505 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Influence of the tool rotational speed on the microstructure and joint strength of friction-stir ...

Contibutors: Dinaharan, Isaac (author) / Akinlabi, Esther T. (author)

1. PDF document (3469 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The effect of current types on the microstructure and corrosion properties of Ni/nanoAlsub2Osub3 ...

Contibutors: Kucharska, Beata (author) / Krawczynska, Agnieszka (author) / Rożniatowski, Krzysztof (author) / Zdunek, Joanna (author) / Poplawski, Karol (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (5584 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Effects of extrusion shear on the microstructures and a fracture analysis of a magnesium alloy in...

Contibutors: Hu, Hongjun (author) / Sun, Zhao (author) / Zhang, Dingfei (author)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (988 kB)

Effect of the aggregate type on the properties of alkali-activated slag subjected to high tempera...

Contibutors: Rovnaník, Pavel (author) / Dufka, Ámos (author)

1. PDF document (1134 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the carbide-particle spheroidisation process on the microstructure after the quenchi...

Contibutors: Dlouhý, Jaromír (author) / Hauserova, Daniela (author) / Nový, Zbyšek (author)

1. PDF document (1464 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (14 kB)

Kvantitativna mikrostrukturna analiza kompozita Cu-C

Contibutors: Rudolf, Rebeka (author) / Anžel, Ivan (author) / Križman, Alojz (author)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (884 kB)

Presentation methods of textures measurements

Contibutors: Godec, Matjaž (author) / Jenko, Monika (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

Mechanical and microstructural properties of duplex steel (1997, volume 31, issue 6)

Contibutors: Gojić, Mirko (author) / Kosec, Ladislav (author) / Vehovar, Leopold (author)

1. PDF document (1004 kB)

Provider: Narodna in univerzitetna knjižnica

The influence of cooling rate on the microstructure of an Al-Mn-Be alloy

Contibutors: Rozman, Niko (author) / Bončina, Tonica (author) / Anžel, Ivan (author) / Zupanič, Franc (author)

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (140 kB)

Fatigue behaviour of a cast nickel-based superalloy Inconel 792-5A at 700 degree C

Contibutors: Petrenec, Martin (author) / Obrtlík, Karel (author) / Polák, Jaroslav (author) / Kruml, Tomáš (author)

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (333 kB)

Microstructural changes of fine-grained concrete exposed to a sulfate attack

Contibutors: Vyšvařil, Martin (author) / Bayer, Patrik (author) / Rovnaníková, Markéta (author)

1. PDF document (4312 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Surface segregation studies of selenium on FeSiAl alloy

Contibutors: Jenko, Monika (author) / Fine, Joseph (author) / Mandrino, Đorđe (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (123 kB)

Effects of deformation temperature on the microstructure and mechanical properties of the AA3003 ...

Contibutors: Chen, Guiqing (author) / Fu, Gaosheng (author) / Lin, Xiaodong (author) / Song, Lili (author) / Cheng, Chaozeng (author) / Wei, Tianyun (author)

1. PDF document (1199 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Effects of heat inputs on the structure of Ni-based amorphous composite coatings applied with las...

Contibutors: Li, Ruifeng (author) / Chen, Zhaohui (author) / Gu, Jiayang (author) / Wang, Yuxin (author) / Wu, Mingfang (author) / Tian, Yingtao (author)

1. PDF document (1624 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Effect of an electromagnetic field on the microstructure and properties of Cr(Ti)AlN hard coating...

Contibutors: Wang, Jin (author) / Ma, Dayan (author) / Liu, Qi (author) / Jin, Yetang (author) / Wang, Xu (author)

1. PDF document (1675 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Priprava poroznih kompozitnih materialov Ni-YSZ z mešanjem Zr(Cspodaj2Ospodaj4)spodaj2.xHspodaj2O...

Contibutors: Marinšek, Marjan (author) / Maček, Jadran (author)

1. PDF document (1822 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Preparation of bio-polymeric materials, their microstructures and physical functionalities

Contibutors: Chen, Xiu-Li (author) / Zhao, Ai-Juan (author) / Sun, Hai-Jie (author) / Pei, Xian-Ru (author)

Influence of the foaming precursor's composition and density on the foaming efficiency, microstru...

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (683 kB)

1. TXT document (41 kB)

Contibutors: Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Paulin, Irena (author) / Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Lažeta, Marjana (author)

Effect of direct cooling conditions on the microstructure and properties of hot-forged HSLA steel...

Numbering: 2011, volume 45, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (373 kB)

1. TXT document (41 kB)

Contibutors: Skubisz, Piotr (author) / Lisiecki, Łukasz (author) / Skowronek, Tadeusz (author) / Żak, Artur (author) / Zalecki, Wladysław (author)

1. PDF document (2259 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructural considerations limiting the mechanical properties of HSLA steel (1996, volume 30, issue 6)

Contibutors: Parilák, L'udovít (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (777 kB)

High coercivities in HDDR processed Sm-Fe-Ta-N magnets

Contibutors: Žužek Rožman, Kristina (author) / McGuiness, Paul J. (author) / Kobe, Spomenka (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (163 kB)

Vpliv redkih zemelj na nastanek nekovinskih vključkov in mikrostrukturo visokolegiranih kromovih ...

Contibutors: Tehovnik, Franc (author) / Doberšek, Mirko (author) / Koroušić, Blaženko (author) / Ule, Boris (author) / Kmetič, Dimitrij (author) / Arh, Boštjan (author) / Dunat, Vinko (author)

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (456 kB)

Cr-V ledeburitic cold-work tool steels

Contibutors: Jurči, Peter (author)

Microstructural features of Cr-V ledeburitic saturated with nitrogen

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (680 kB)

1. TXT document (47 kB)

Contibutors: Jurči, Peter (author) / Hnilica, František (author) / Suchánek, Jan (author) / Stolař, Pavel (author)

Numbering: 2004, volume 38, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (520 kB)

Effect of the bonding time on the microstructure and mechanical properties of a transient-liquid-...

Contibutors: Pouranvari, Majid (author) / Ekrami, Ali (author) / Kokabi, Amir Hossein (author)

1. PDF document (1745 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mikrostruktura in lastnosti površine nizko-ogljičnega jekla po obdelavi z laserjem

Contibutors: Spruk, Sonja (author) / Rodič, Alenka (author) / Praček, Borut (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (113 kB)

Priprava Ni-YSZ kompozitnih materialov za visokotemperaturne gorivne celice (1997, volume 31, issue 1/2)

Contibutors: Marinšek, Marjan (author) / Maček, Jadran (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (693 kB)

Effect of heat treatment on the microstructure and properties of Cr-V ledeburitic steel

Contibutors: Krum, Stanislav (author) / Sobotová, Jana (author) / Jurči, Petr (author)

Numbering: 2010, volume 44, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (582 kB)

Mikrostruktura industrijsko kontinuirno ulite Ni-superzlitine GMR 235

Contibutors: Zupanič, Franc (author) / Bončina, Tonica (author) / Križman, Alojz (author)

Numbering: 2004, volume 38, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (178 kB)

Temperaturna nestabilnost mikrostrukturnih sestavin v zlitinah Ag-Te in Ag-Se

Contibutors: Roth, Jože (author) / Bizjak, Milan (author) / Kosec, Ladislav (author)

Numbering: 2000, volume 34, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (176 kB)

The effects of leaching on the mineral phases in argon-oxygen decarburization of stainless-steel ...

Contibutors: Wang, Ya-Jun (author) / Zeng, Ya-Nan (author) / Li, Jun-Guo (author)

1. PDF document (2089 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Integriteta površin pri laserskem pretaljevanju siluminov

Contibutors: Grum, Janez (author) / Božič, Slavko (author)

1. PDF document (2015 kB)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (29 kB)

Microstructure evolution and fracture analysis of hot-rolled explosive-welded 06Cr13/Q345R compos...

Contibutors: Li, Huaying (author) / Zhao, Guanghui (author) / Li, Juan (author) / Ma, Lifeng (author) / Huang, Qingxue (author) / Li, Yugui (author)

Microstructural evaluation of Ni-SDC cermet from a representative 2D image and /or a 3D reconstru...

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (11 MB)

1. TXT document (28 kB)

Contibutors: Kapun, Gregor (author) / Marinšek, Marjan (author) / Merzel, Franci (author) / Šturm, Sašo (author) / Gaberšček, Miran (author) / Skalar, Tina (author)

1. PDF document (1957 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (76 kB)

Struktura in mikrostruktura jeklenih peskov, narejenih v Abrasivu Muta

Contibutors: Rudolf, Rebeka (author) / Križman, Alojz (author) / Bončina, Tonica (author)

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (591 kB)

Electrical conductivity of sintered LSM ceramics

Contibutors: Marinšek, Marjan (author)

1. PDF document (1460 kB)

Numbering: 2009, volume 43, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Primerjava različnih metod priprave kompozitnih materialov Ni-YSZ za visokotemperaturne gorivne c...

Contibutors: Marinšek, Marjan (author) / Maček, Jadran (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (188 kB)

The characterisation of intermetallic-compound particles in an annealed Al-Mg-Cr-Fe alloy

Contibutors: Svoboda, Milan (author) / Janovec, Jozef (author) / Jenko, Monika (author) / Vranković, Ante (author)

Numbering: 2004, volume 38, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (708 kB)

Production of shaped semi-products from AHS steels by internal pressure

Contibutors: Vorel, Ivan (author) / Jirková, Hana (author) / Mašek, Bohuslav (author) / Kurka, Petr (author)

1. PDF document (2999 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of austempering temperature on microstructure and mechanical properties of unalloyed ducti...

Contibutors: Bošnjak, Branka (author) / Radulović, Branko (author)

Hot tensile testing of SAF 2205 duplex stainless steel

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (499 kB)

1. TXT document (11 kB)

Contibutors: Tehovnik, Franc (author) / Žužek, Borut (author) / Burja, Jaka (author)

1. PDF document (1303 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Low energy-high flux nitridation of metal alloys

Contibutors: Pedraza, Fernando (author)

The influence of iron and silicon on the microstructure of extruded, high-strength Al-Zn-Cu alloys

Numbering: 2008, volume 42, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (659 kB)

1. TXT document (56 kB)

Contibutors: Vratnica, Maja (author) / Curovic, Jelisav (author) / Burzić, Zijah (author)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (85 kB)

1. TXT document (10 kB)

Zakaj poka jeklo pri kaljenju?

Contibutors: Legat, Franc (author)

Influence of scanning speed on the intermetallic produced in-situ in laser-metal-deposited TiC/Ti...

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (87 kB)

1. TXT document (14 kB)

Contibutors: Mahamood, Rasheedat Modupe (author) / Akinlabi, Esther T. (author)

1. PDF document (1703 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Calculation of accelerated stationary creep rate activation energy for a steel microstructure wit...

Contibutors: Žužek, Borut (author) / Vodopivec, Franc (author) / Podgornik, Bojan (author) / Jenko, Monika (author) / Godec, Matjaž (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (168 kB)

Microstructure evaluation of an NRC-processed automotive component

Contibutors: Torkar, Matjaž (author) / Breskvar, Bojan (author) / Godec, Matjaž (author) / Giordano, Paola (author) / Chiarmetta, Gianluigi (author)

1. PDF document (1773 kB)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Structure and properties of laser-beam-welded joints of low-alloy high-strength steel DOCOL 1200M...

Contibutors: Górka, Jacek (author) / Ozgowicz, Andrzej (author)

1. PDF document (3676 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of tool geometry and welding parameters on the microstructure and static strength of the f...

Contibutors: Abedini, Omid (author) / Ranjbarnodeh, Eslam (author) / Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (3418 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Influence of segregations on the fracture toughness Ksub{Ic} of high-strength spring steel

Contibutors: Senčič, Bojan (author) / Leskovšek, Vojteh (author)

Characterization of a porous nickel-titanium alloy produced with self-propagating high-temperatur...

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (771 kB)

1. TXT document (29 kB)

Contibutors: Tosun, Gul (author) / Kilic, Musa (author) / Ozler, Latif (author) / Tosun, Nihat (author)

1. PDF document (4124 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Kompozitni spajkani spoji (1996, volume 30, issue 1/2)

Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (945 kB)

The influence of austenitising temperature on the microstructure and mechanical properties of low...

Contibutors: Radulović, Branko (author) / Bošnjak, Branka (author) / Harding, Richard (author) / Pop-Tonev, Kiro (author) / Asanovic, Vanja (author)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (882 kB)

Characterisation of the mechanical and corrosive properties of newly developed glass-steel compos...

Contibutors: Lyubimova, Olga (author) / Gridasova, Ekaterina (author) / Gridasov, Alexander (author) / Frieling, Gerrit (author) / Klein, Martin (author) / Walther, Frank (author)

1. PDF document (1543 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Vpliv pogojev strjevanja na mikrostrukturo zlitin in kompozitov s sestavo AlSi17Cu5

Contibutors: Lojen, Gorazd (author) / Anžel, Ivan (author) / Križman, Alojz (author)

Mikrostrukturne raziskave v binarnem sistemu Sm-Ti (1996, volume 30, issue 3/4)

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (368 kB)

1. TXT document (42 kB)

Contibutors: Saje, Boris (author) / Spaić, Savo (author) / Valant, M. (author)

Evaluation of the microstructural changes in Cr-V ledeburitic tool steels depending on the austen...

Provider: Narodna in univerzitetna knjižnica

1. PDF document (516 kB)

1. TXT document (10 kB)

Contibutors: Bílek, Pavel (author) / Sobotová, Jana (author) / Jurči, Peter (author)

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (230 kB)

Oxygen diffusion in the non-evaporable getter St 707 during heat treatment

Contibutors: Avdiaj, Sefer (author) / Šetina, Barbara (author) / Šetina, Janez (author) / Erjavec, Bojan (author)

Numbering: 2011, volume 45, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (841 kB)

Relationship between a bainitic structure and the hardness in the weld zone of the friction-stir ...

Contibutors: Aydin, Hakan (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (623 kB)

Tailoring the microstructure of ZnO-based ceramics

Contibutors: Bernik, Slavko (author) / Podlogar, Matejka (author) / Daneu, Nina (author) / Rečnik, Aleksander (author)

The influence of the morphology of iron powder particles on their compaction in an automatic die

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (349 kB)

1. TXT document (41 kB)

Contibutors: Šuštaršič, Borivoj (author) / Godec, Matjaž (author) / Donik, Črtomir (author) / Paulin, Irena (author) / Glodež, Srečko (author) / Šori, Marko (author) / Ratej, Milan (author) / Javornik, Nada (author)

1. PDF document (1209 kB)

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of material properties on the machinability in face milling

Contibutors: Sekulić, Milenko (author) / Hadžistević, Miodrag (author) / Gostimirović, Marin (author) / Turisova, Renata (author) / Pejić, Vlastimir (author)

1. PDF document (2830 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of samarium on the microstructure and mechanical properties of Mg-Y-Zn-Zr alloys

Contibutors: Wang, Wenli (author) / Long, Yu-Qiu (author) / Jia, Jingda (author) / Yan, Xin (author) / Zhang, Wei (author)

1. PDF document (1593 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructures of the Al-Fe-Cu-X alloys prepared at various solidification rates

Contibutors: Voděrová, Milena (author) / Novák, Pavel (author) / Průša, Filip (author) / Vojtěch, Dalibor (author)

1. PDF document (2512 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of austenitising temperature on austempering kinetics of Ni-Mo alloyed ductile iron

Contibutors: Bosnjak, Branka (author) / Radulović, Branko (author)

Numbering: 2004, volume 38, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (727 kB)

An investigation of the economics of using welded layers for some parts of worm presses for the e...

Contibutors: Marušić, Vlatko (author) / Kljajin, Milan (author) / Marušić, Sanja (author)

Numbering: 2009, volume 43, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (416 kB)

Vpliv postopka izdelave na mikrostrukturo predzlitine Al-Ti-B (1995, volume 29, issue 1/2)

Contibutors: Zupanič, Franc (author) / Križman, Alojz (author) / Lojen, Gorazd (author) / Bončina, Tonica (author) / Anžel, Ivan (author) / Spaić, Savo (author)

Molecular dynamics simulation of Ti-6Al-4V diffusion bonding behavior under different process par...

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (471 kB)

1. TXT document (13 kB)

Contibutors: Liu, Xiaogang (author) / Xu, Lei (author) / Zhang, Sun (author)

1. PDF document (4917 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Microstructural and physical-mechanical analyses of the performance of nanostructured and other c...

Contibutors: Borsoi, Giovanni (author) / Tavares, Martha (author) / Veiga, Maria do Rosário (author) / Silva, António Santos (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

The effect of compositional variations on the fracture toughness of 7000 Al-alloys

Contibutors: Vratnica, Maja (author) / Cvijović, Zorica (author) / Radović, Nenad (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Novel materials based on Lasub0.75SrsubxAsub0.25-xCrsub0.5Mnsub0.5Osub3 (A=Ba, Ca, Mg) as full-ce...

Contibutors: Skalar, Tina (author) / Marinšek, Marjan (author) / Zupan, Klementina (author)

1. PDF document (2467 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

A co-precipitation procedure for the synthesis of LSM material

Contibutors: Marinšek, Marjan (author) / Zupan, Klementina (author) / Razpotnik, Tanja (author) / Maček, Jadran (author)

1. PDF document (3037 kB)

Numbering: 2007, volume 41, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Nizkotlačno injekcijsko brizganje reakcijsko vezane keramike na osnovi aluminijevega oksida (1995, volume 29, issue 1/2)

Contibutors: Sajko, Marjan (author) / Kosmač, Tomaž (author) / Novak, Saša (author)

Characterisation of A 6082 aluminum alloy after thixoforming

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (494 kB)

1. TXT document (13 kB)

Contibutors: Cabibbo, Marcello (author) / Evangelista, Enrico (author) / Spigarelli, Stefano (author) / Cerri, Emanuela (author)

The microstructure of metastable austenite in X5CrNi18-10 steel after its strain-induced martensi...

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (404 kB)

1. TXT document (28 kB)

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Ozgowicz, Wojciech (author) / Kalinowska-Ozgowicz, Elżbieta (author) / Maziarz, Wojciech (author)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (585 kB)

Durability of materials based on a polymer-silicate matrix and a lightweight aggregate exposed to...

Contibutors: Melichar, Tomáš (author) / Bydžovský, Jiří (author) / Dufka, Ámos (author)

1. PDF document (2439 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (66 kB)

Characterization of a polymer-matrix composite support beam

Contibutors: Štrekelj, Neva (author) / Maren, Matevž (author) / Naglič, Iztok (author) / Demšar, Andrej (author) / Dervarič, Evgen (author) / Markoli, Boštjan (author)

1. PDF document (1239 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Lastnosti in mikrostruktura avstenitnih nerjavnih jeklenih peskov

Contibutors: Bončina, Tonica (author) / Zupanič, Franc (author) / Anžel, Ivan (author) / Križman, Alojz (author)

1. PDF document (2802 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Metallographic characterization of the joining part for the EN 10216-1 and EN 10083-3 made with d...

Contibutors: Štrekelj, Neva (author) / Lampič, Marko (author) / Kosec, Ladislav (author) / Markoli, Boštjan (author)

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (546 kB)

Effects of different stirrer-pin forms on the joining quality obtained with friction-stir welding

Contibutors: Başak, Hüdayim (author) / Kaptan, Kadir (author)

1. PDF document (1997 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Static and dynamic tensile characteristics of S420 and IF steel sheets

Contibutors: Mihaliková, Mária (author) / Girman, Vladimír (author) / Lišková, Anna (author)

1. PDF document (1444 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Characterization of the substrates from two cultural-heritage sites and a preparation of model su...

Contibutors: Kramar, Sabina (author) / Ducman, Vilma (author) / Vucetic, Snezana (author) / Velkavrh, Edo (author) / Radeka, Miroslava (author) / Ranogajec, Jonjaua (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (403 kB)

Microstructure and mechanical properties of graphene-reinforced aluminum-matrix composites

Contibutors: Du, Xiaoming (author) / Zheng, Kaifeng (author) / Liu, Fengguo (author)

1. PDF document (1283 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Aluminum matrix composites reinforced with nano TiC particles: microstructure and wear behaviour

Contibutors: Lu, Yalin (author) / Zhou, Dongshuai (author) / Li, Xingcheng (author) / Wang, Jian (author) / Li, Wen (author) / Bai, Zhihao (author)

1. PDF document (3960 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Vpliv termomehanskih obremenitev pri dolgotrajnem obratovanju na lastnosti materiala 15NiCuMoNb5

Contibutors: Godec, Boštjan (author) / Gerdun, Viktor (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (445 kB)

Strukturna analiza ploskovnih napak v oksidni keramiki (1995, volume 29, issue 1/2)

Contibutors: Rečnik, Aleksander (author) / Kolar, Drago (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (954 kB)

Microstructure evolution and damping characteristics in cast Mg-Al-Si alloys

Contibutors: Chen, Shuqun (author) / Dong, Xuanpu (author)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Chemically controlled sintering and microstructural development in ceramics (1997, volume 31, issue 6)

Contibutors: Kolar, Drago (author)

1. PDF document (1504 kB)

Provider: Narodna in univerzitetna knjižnica

1. TXT document (32 kB)

Laserska toplotna obdelava površine orodnega jekla OCR 12 (1996, volume 30, issue 1/2)

Contibutors: Spruk, Sonja (author) / Rodič, Alenka (author) / Praček, Borut (author)