dLib.si - Slovenia

The dynamics of tapered-roller bearings – a bottom-up validation study

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (18 MB)

1. TXT document (266 kB)

Contibutors: Razpotnik, Matej (author) / Bischof, Thomas (author) / Boltežar, Miha (author)

1. PDF document (2210 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Applying parametric analysis in enhancing performance for double-layer scissor lifts

Contibutors: Dang, Anh-Tuan (author) / Nguyen, Dang-Viet (author) / Nguyen, Dinh-Ngoc (author)

1. PDF document (2102 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Machining of hard-to-cut AISI 4462 duplex stainless steel with an environmentally friendly approa...

Contibutors: Sönmez, Fikret (author)

1. PDF document (2536 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Inventory risk decision-making techniques using customer behaviour analysis

Contibutors: Marc, Ivan (author) / Berlec, Tomaž (author)

Finite element analysis of notch depth and angle in notch shear cutting of stainless-steel sheet

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (682 kB)

1. TXT document (41 kB)

Contibutors: Emre Engin, Kaan (author)

1. PDF document (2358 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Recent advancement via experimental investigation of the mechanical characteristics of sisal and ...

Contibutors: Chaouki, Benchaabane (author) / Abdelkader, Kirad (author) / Mouloud, Aissani (author)

1. PDF document (2676 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Effect of vibrator parameters and physical characteristics of parts on conveying velocity

Contibutors: Vellingiri, Vishwa Priya (author) / Sadasivam, Udhayakumar (author)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (848 kB)

Fundamentals of odour assessment in Slovenia

Contibutors: Dobeic, Martin (author) / Butala, Vincenc (author) / Prek, Matjaž (author) / Leskovšek, Jan (author) / Švegelj, Žiga (author)

1. PDF document (2984 kB)

Numbering: 2020, volume 66, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Ultra-precision single-point diamond turning of a complex sinusoidal mesh surface using machining...

Contibutors: Ning, Peixing (author) / Zhao, Ji (author) / Ji, Shijun (author) / Li, Jingjing (author) / Dai, Handa (author)

1. PDF document (3694 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Basic theory and design method of variable shaft angle line gear mechanism

Contibutors: Chen, Yang-zhi (author) / He, Chao (author) / Lyu, Yue-ling (author)

1. PDF document (1574 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Predictive estimation of sliding bearing load-carrying capacity and tribological durability

Contibutors: Chernets, Myron (author) / Opielak, Marek (author) / Kornienko, Anatolii (author) / Radko, Oleg (author)

Experimental investigation and mathematical modelling of heat transfer coefficient in double slop...

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (623 kB)

1. TXT document (26 kB)

Contibutors: Patel, Raj Vardhan (author) / Yadav, Anshul (author) / Winczek, Jerzy Adam (author)

1. PDF document (1724 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Mechanical properties of adhesive joints made with pressure-sensitive adhesives

Contibutors: Rudawska, Anna (author) / Wahab, Magd Abdel (author)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (637 kB)

Characterization of the AZ31/AW-6060 joint fabricated using compound casting with a Zn interlayer...

Contibutors: Bucki, Tomasz (author) / Konieczny, Marek (author) / Bolibruchová, Dana (author) / Rzepa, Sylwia (author)

1. PDF document (5123 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Strojniški vestnik (2021, volume 67, issue 9)

1. PDF document (9997 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (273 kB)

Strojniški vestnik (2021, volume 67, issue 7/8)

1. PDF document (4208 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (231 kB)

Strojniški vestnik (2021, volume 67, issue 10)

1. PDF document (5090 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (275 kB)

Nonlinear control of a pneumatic actuator based on a dynamic friction model

Contibutors: Bo Tran, Xuan (author)

1. PDF document (6490 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Control of an anthropomorphic manipulator using LuGre friction model - design and experimental va...

Contibutors: Ali, Khurram (author) / Mehmood, Adeel (author) / Muhammad, Israr (author) / Razzaq, Sohail (author) / Iqbal, Jamshed (author)

1. PDF document (3160 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Strojniški vestnik (2021, volume 67, issue 11)

Predictions of friction coefficient in hydrodynamic journal bearing using artificial neural networks

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (20 MB)

1. TXT document (317 kB)

Contibutors: Milčić, Dragan (author) / Alsammarraie, Amir (author) / Madić, Miloš (author) / Krstić, Vladislav (author) / Milčić, Miodrag (author)

1. PDF document (1723 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Trajectory-tracking control for manipulators based on fuzzy equivalence and a terminal sliding mode

Contibutors: Liu, Youyu (author) / Li, Yi (author) / Zhang, Xuyou (author) / Chen, Bo (author)

1. PDF document (4228 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Active vibration control of a mechanical servo high-speed fine-blanking press

Contibutors: Liu, Yanxiong (author) / Shu, Yuwen (author) / Hu, Wentao (author) / Zhao, Xinhao (author) / Xu, Zhicheng (author)

1. PDF document (3724 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Effectiveness of automatic cam programming using machining templates for the manufacture of speci...

Contibutors: Kowalski, Maciej (author) / Zawadzki, Przemysław (author) / Hamrol, Adam (author)

1. PDF document (1722 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

Fault diagnosis of rotation vector reducer for industrial robot based on a convolutional neural n...

Contibutors: Yang, Shuai (author) / Luo, Xing (author) / Li, Chuan (author)

1. PDF document (2585 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Response analysis of a scraper conveyor under chain faults based on MBD-DEM-FEM

Contibutors: Wang, Zisheng (author) / Li, Bo (author) / Liang, Chao (author) / Wang, Xuewen (author) / Li, Jiahao (author)

1. PDF document (6406 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation on the depth of slip hanger teeth bite into casing and the mechanical properties of...

Contibutors: Chen, Yong (author) / Tan, Jinjin (author) / Xiao, Guoping (author)

1. PDF document (2391 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimization of laser parameters and dimple geometry using PCA-coupled gRG

Contibutors: Kandasamy Ganesan, Saravanan (author) / Thanigaivelan, Rajasekaran (author)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (916 kB)

Mechanical characterization and structural attributes of biohybrid composites derived using hemp,...

Contibutors: Bose, Rajmohan (author) / Kandavel, Arunachalam (author)

1. PDF document (4476 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Performance study of EDM process parameters using TiC/ZrSiO sub 4 particulate-reinforced copper c...

Contibutors: Saminatharaja, Duraisivam (author) / Suresh, Periyakgounder (author) / Selvaraj, Mahalingam (author) / Elangandhi, Jamuna (author)

1. PDF document (2781 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A method for calculating elliptic gear transmission efficiency based on transmission experiment

Contibutors: Dong, Changbin (author) / Liu, Yongping (author) / Zhao, Gang (author)

1. PDF document (3645 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Electro-hydraulic drive of the variable ratio lifting device under active load

Contibutors: Kosucki, Andrzej (author) / Stawiński, Łukasz (author) / Morawiec, Adrian (author) / Goszczak, Jarosław (author)

1. PDF document (3530 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Applicability of MCDM algorithms for the selection of phase change materials for thermal energy s...

Contibutors: Felix, Paul Gregory (author) / Rajagopal, Velavan (author) / Kumaresan, Kannan (author)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (814 kB)

Investigation of hydrodynamic flow characteristics in helical coils with ovality and wrinkles

Contibutors: Periasamy, Govindaraj (author) / Mouleeswaran, Senthilkumar (author) / Venugopal, Prabhu Raja (author) / Perumal, Chellapandi (author)

1. PDF document (3676 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Synchronization and stability of a three co-rotating rotor system coupled with springs in a non-r...

Contibutors: Du, Mingjun (author) / Hou, Yongjun (author) / Tang, Tong (author) / Tang, Lian (author) / Wang, Jialong (author) / Gao, Hongbo (author)

1. PDF document (4826 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (65 kB)

Strojniški vestnik (2021, volume 67, issue 12)

1. PDF document (4247 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (342 kB)

Strojniški vestnik (2022, volume 68, issue 1)

1. PDF document (5720 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (290 kB)

Study of Bondura® expanding PIN system

Contibutors: Akhtar, Muhammad Maaz (author) / Karlsen, Oyvind (author) / Lemu, Hirpa G. (author)

Modelling and multi-objective optimization of elastic abrasive cutting of C45 and 42Cr4 steels

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (827 kB)

1. TXT document (38 kB)

Contibutors: Stefanova Aleksandrova, Irina (author) / Stoynova, Anna (author) / Aleksandrov, Anatoliy (author)

1. PDF document (1111 kB)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (63 kB)

Investigation of cutting performance of a circular saw blade based on ANSYS/LS-DYNA

Contibutors: Wang, Zhiwen (author) / Zeng, Qingliang (author) / Lu, Zhenguo (author) / Wan, Lirong (author) / Zhang, Xin (author) / Liu, Zhihai (author)

1. PDF document (1596 kB)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Review of peridynamics

Contibutors: Ladányi, Gábor (author) / Gonda, Viktor (author)

Extremal-micro genetic algorithm model for time-cost optimization with optimal labour productivity

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (505 kB)

1. TXT document (79 kB)

Contibutors: Sivakumar, A. (author) / Bagath Singh, N. (author) / Sathiamurthi, P (author) / Karthi Vinith, K. S. (author)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (368 kB)

Incorporation of a simplified mechanical joint model into numerical analysis

Contibutors: Glavan, Mitja (author) / Klemenc, Jernej (author) / Malnarič, Vili (author) / Šeruga, Domen (author)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (845 kB)

Research on the traction and obstacle surmounting performance of an adaptive pipeline plugging robot

Contibutors: Yan, Hongwei (author) / Li, Jian (author) / Kou, Ziming (author) / Liu, Yi (author) / Li, Pengcheng (author) / Wang, Lu (author)

Detection of outer wall defects on steel pipe using an encircling Rotating electromagnetic Field ...

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (966 kB)

1. TXT document (53 kB)

Contibutors: Yin, Xiaokang (author) / Gu, Zhuoyong (author) / Wang, Wei (author) / Zhang, Xiaorui (author) / Yuan, Xin'an (author) / Li, Wei (author) / Chen, Guoming (author)

1. PDF document (1148 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Research on real-time reliability evaluation method integrated with online fault diagnosis

Contibutors: Liu, Peng (author) / Shen, Dagang (author) / Cao, Jinfeng (author)

1. PDF document (1685 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Early detection of defects in gear systems using autocorrelation of morlet wavelet transforms

Contibutors: Ayad, Mouloud (author) / Saoudi, Kamel (author) / Rezki, Mohamed (author) / Benziane, Mourad (author) / Arabi, Abderrazak (author)

1. PDF document (1228 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The effect of population aging on heating energy demand on national level

Contibutors: Lampret, Žiga (author) / Krese, Gorazd (author) / Prek, Matjaž (author)

Numbering: 2019, volume 65, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (475 kB)

Novel unsteady state method of measuring permeability tested on fabric materials

Contibutors: Sitar, Anže (author)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (942 kB)

Nonlinear coupled dynamic modelling of driver-seat-cab system and biomechanical behaviour prediction

Contibutors: Zhao, Leilei (author) / Yu, Yuewei (author) / Cao, Jianhua (author)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (841 kB)

The measurement of the wear of tie rod end components

Contibutors: Wozniak, Marek (author) / Rylski, Adam (author) / Siczek, Krzysztof (author)

1. PDF document (1459 kB)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (120 kB)

Simulation and experimental research on electrical control anti-backlash based on a novel type of...

Contibutors: Wang, Guangjian (author) / Zhu, Dongdong (author) / Zou, Shuaidong (author) / Jiang, Yujiang (author) / Tian, Xin (author)

1. PDF document (4112 kB)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (53 kB)

Cavitation erosion modelling on a radial divergent test section using RANS

Contibutors: Kevorkijan, Luka (author) / Lešnik, Luka (author) / Biluš, Ignacijo (author)

1. PDF document (1215 kB)

Numbering: 2022, volume 68, iss. 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Strojniški vestnik (2022, volume 68, issue 4)

Strojniški vestnik (2022, volume 68, issue 3)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (16 MB)

1. TXT document (380 kB)

1. PDF document (7592 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (272 kB)

Strojniški vestnik (2022, volume 68, issue 2)

1. PDF document (4975 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (309 kB)

Effect of Immersion media for polyester composite reinforced with chicken feathers on creep behavior

Contibutors: Abed, Balsam H. (author) / Battawi, Ali A. (author) / Khuder, Abdul Wahab H. (author)

1. PDF document (1758 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Investigation of dynamic behaviour of four-leg hydraulic support under double-impact load

Contibutors: Xie, Yunyue (author) / Zeng, Qingliang (author) / Jiang, Kao (author) / Meng, Zhaosheng (author) / Li, Qinghai (author) / Zhang, Junming (author)

1. PDF document (3847 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Enhancing the performance of a vapour compression refrigerator system using R134a with a CuO/CeO2...

Contibutors: Mohamed, HudaElslam (author) / Camdali, Unal (author) / Biyikoglu, Atilla (author) / Aktas, Metin (author)

1. PDF document (2658 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (63 kB)

Indices to evaluate the performance of force transmission and constraint for parallel mechanisms

Contibutors: Zhang, Tie (author) / Cao, Yachao (author) / Ma, Guangcai (author)

1. PDF document (3121 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimization of friction stir welding operation using optimal Taguchi-based ANFIS and genetic alg...

Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (3165 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Determination of Limiting Dome Height (LDH) values for Inconel 718 alloy sheet using FEA and hemi...

Contibutors: Ganesan, Kanmani (author) / Sambasivam, Saravanan (author) / Ramadass, Rajesh (author)

1. PDF document (1890 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Comparison study of four commercial SARS-CoV-2-rapid antigen tests

Contibutors: Jelen, Žiga (author) / Anžel, Ivan (author) / Rudolf, Rebeka (author)

1. PDF document (2316 kB)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Robust and intuitive model for COVID-19 epidemic in Slovenia

Contibutors: Leskovar, Matjaž (author) / Cizelj, Leon (author)

1. PDF document (2304 kB)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Thermal mechanical coupling analysis of a flexible spoke non-pneumatic tire

Contibutors: Fu, Hongxun (author) / Liang, Xuemeng (author) / Wang, Yan (author) / Ku, Laiyun (author) / Xiao, Zhen (author)

1. PDF document (3625 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation and optimization of MQL system parameters in the roller-burnishing process of harde...

Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (2173 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimization of FSW processing factors on hardness for dissimilar AA6061-T6 and AZ31B O alloys

Contibutors: Vasantha Kumar, Karutha Pandian (author) / Balasubramanian, Muthusamy (author)

1. PDF document (2388 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Error prediction for large optical mirror processing robot based on deep learning

Contibutors: Jin, Zujin (author) / Cheng, Gang (author) / Xu, Shichang (author) / Yuan, Dunpeng (author)

1. PDF document (1658 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analysis of educational building’s ventilation suitability to prevent the spread of coronavirus (...

Contibutors: Osterman, Eneja (author) / Stritih, Uroš (author) / Dovjak, Mateja (author) / Vaupotič, Janja (author) / Verbajs, Tomaž (author) / Mlakar, Urška (author) / Zavrl, Eva (author)

Optimisation of PLA filament consumption for 3D printing using the annealing method in home envir...

Numbering: 2022, volume 68, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (973 kB)

1. TXT document (29 kB)

Contibutors: Djukanović, Milena (author) / Damjanović, Milanko (author) / Radunović, Luka (author) / Jovanović, Mihailo (author)

Adaptive electromagnetic vibration absorber for a multimode structure

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (650 kB)

1. TXT document (27 kB)

Contibutors: Mohamed, Khaled S. (author) / Amri, Fatin (author) / Elboraey, Mostafa (author) / Nordin, N.H. Diyana (author) / Muthalif, Asan (author)

1. PDF document (1351 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Statistical modelling and optimization of TIG welding process parameters using Taguchi’s method

Contibutors: Omprakasam, S. (author) / Marimuthu, Kathiresan (author) / Raghu, R. (author) / Velmurugan, T. (author)

1. PDF document (4659 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Surveying healthcare workers to improve the design, wearer experience and sustainability of PPE i...

Contibutors: Šterman, Sonja (author) / Townsend, Katherine (author) / Salter, Eloise (author) / Harrigan, Karen (author)

1. PDF document (1692 kB)

Numbering: 2022, volume 68, iss. 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (57 kB)

Public handling of protective masks from use to disposal and recycling options to new products

Contibutors: Remic, Katarina (author) / Erjavec, Alen (author) / Volmajer Valh, Julija (author) / Šterman, Sonja (author)

1. PDF document (2132 kB)

Numbering: 2022, volume 68, iss. 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Bacterial filtration efficiency of different masks

Contibutors: Košir, Tamara (author) / Fric, Katja (author) / Filipić, Arijana (author) / Kogovšek, Polona (author)

1. PDF document (1709 kB)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Correlation between air pollution and the spread and development of COVID-19 related disease

Contibutors: Marčenko, Erik (author) / Lampret, Žiga (author) / Prek, Matjaž (author)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (458 kB)

The prevalence of COVID-19 among health care personnel in a University Hospital by the end of 202...

Contibutors: Blinc, Aleš (author) / Buturović-Ponikvar, Jadranka (author) / Fras, Zlatko (author)

Strojniški vestnik (2022, volume 68, issue 6)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (653 kB)

1. TXT document (27 kB)

Measuring the efficiency of reduction gearboxes for electric utility vehicles during specific dri...

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (18 MB)

1. TXT document (279 kB)

Contibutors: Petr, Tomas (author) / Brousek, Josef (author) / Jezek, Jakub (author) / Zvolsky, Tomas (author) / Vozenilek, Robert (author)

1. PDF document (1000 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Switch semi-active control of the floating raft vibration isolation system

Contibutors: Weng, Zeyu (author) / Liu, Shengli (author) / Xu, Teqi (author) / Wu, Xiaoyu (author) / Wang, Zhe (author) / Tang, Jie (author)

1. PDF document (2313 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Effect of vibration and noise measuring points distribution on the sensitivity of pump cavitation...

Contibutors: Zhou, Runze (author) / Chen, Hui (author) / Dong, Liang (author) / Liu, Houlin (author) / Chen, Zeyu (author) / Zhang, Yuhang (author) / Cheng, Zhiming (author)

1. PDF document (5171 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Optimization of tuned mass damper location for enhanced chatter suppression in thin-wall milling

Contibutors: Selvakumar, Mohanraj (author) / Venugopal, Prabhu Raja (author) / Velayudhan, Gautham (author)

1. PDF document (2429 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Fatigue life prediction of butt weld joint with weld defects at multiple locations

Contibutors: Gnanasigamony Thankareathenam, Ebron Shaji (author) / Venugopal, Prabhu Raja (author) / Velayudhan, Gautham (author) / Selvakumar, Mohanraj (author)

1. PDF document (1334 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Multi-response optimization of the tribological behaviour of PTFE-based composites via Taguchi gr...

Contibutors: Ibrahim, Musa Alhaji (author) / Çamur, Hüseyin (author) / Savaş, Mahmut A. (author) / Sabo, Alhassan Kawu (author)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (876 kB)

Numerical analysis on a constant rate of kinetic energy change based a two-stage ejector-diffuser...

Contibutors: Sethi, Virendra Kumar (author) / Kumar, Anil (author) / Kumar Yadav, Surendra (author) / Yadav, Anshul (author) / Prasad, Lalta (author) / Winczek, Jerzy Adam (author)

Short-term creep behaviour of different polymers used in additive manufacturing under different t...

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (608 kB)

1. TXT document (26 kB)

Contibutors: Dogan, Oguz (author)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (779 kB)

Preparation and thermal characterization of nanographene- enhanced fatty acid-based solid-liquid ...

Contibutors: Kittusamy, Ragul Kumar (author) / Rajagopal, Velavan (author) / Felix, Paul Gregory (author)

1. PDF document (2863 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Optimization of in-vehicle carbon dioxide level in a 5-seat car

Contibutors: Jayasankar, Prabhakaran (author) / Subbaian, Jayabal (author)

1. PDF document (5552 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (48 kB)

Optimization in the resistant spot-welding process of AZ61 magnesium alloy

Contibutors: Afshari, Davood (author) / Ghaffari, Ali (author) / Barsum, Zuheir (author)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (819 kB)

Effect of dual-stage ageing and RRA treatment on the three-body abrasive wear of the AW7075 alloy

Contibutors: Lachowicz, Marzena M. (author) / Leśniewski, Tadeusz (author) / Lachowicz, Maciej B. (author)

Nitriding HS6-5-2 steel in inductively coupled plasma

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (21 MB)

1. TXT document (38 kB)

Contibutors: Binienda, Marek (author) / Pietrasik, Robert (author) / Pawęta, Sylwester (author) / Matczak, Krzysztof (author) / Krotewicz, Witold (author)

1. PDF document (3557 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (27 kB)

Fractal geometry as an effective heat sink

Contibutors: Ramšak, Matjaž (author)

1. PDF document (3049 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

MTPA- and MSM-based vibration transfer of 6-DOF manipulator for anchor drilling

Contibutors: Liu, Youyu (author) / Ma, Liteng (author) / Yang, Siyang (author) / Yuan, Liang (author) / Chen, Bo (author)

1. PDF document (3411 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (41 kB)

Functional surface layer strengthening and wear resistance increasing of a low carbon steel by el...

Contibutors: Kombayev, Kuat (author) / Muzdybayev, Murat (author) / Muzdybayeva, Alfiya (author) / Myrzabekova, Dinara (author) / Wieleba, Wojciech (author) / Leśniewski, Tadeusz (author)

1. PDF document (5008 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Industrial experimental research as a contribution to the development of an experimental model of...

Contibutors: Wrzochal, Mateusz (author) / Adamczak, Stanisĺaw (author) / Piotrowicz, Grzegorz (author) / Wnuk, Sylwester (author)

1. PDF document (1485 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Limit-protection method for workspace of a parallel power head

Contibutors: Ni, Yanbing (author) / Lu, Wenliang (author) / Jia, Shilei (author) / Lu, Chenghao (author) / Zhang, Ling (author) / Yang, Wen (author)

1. PDF document (2507 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Nonlinear vibration analysis of functionally graded porous plates reinforced by graphene platelet...

Contibutors: Huang, Xiaolin (author) / Wang, Chengzhe (author) / Wang, Jiaheng (author) / Wei, Nengguo (author)

Strojniški vestnik (2022, volume 68, issue 10)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (932 kB)

1. TXT document (44 kB)

1. PDF document (4125 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (343 kB)

Strojniški vestnik (2022, volume 68, issue 5)