dLib.si - search results

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

Compositional and microstructural study of sol-gel-derived PbZrsub(0.3)Tisub(0.7)Osub3 /Alsub2Osu...

Contibutors: Khomyakova, Evgeniya (author) / Benčan, Andreja (author) / Malič, Barbara (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2256 kB)

Laser cladding of Ti-6Al-4V alloy with vanadium carbide particles

Contibutors: El-Labban, H. F. (author) / Mahmoud, E. R. I. (author) / Al-Wadai, H. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1961 kB)

Parametric study of die sinking EDM process on AISI H13 tool steel using statistical techniques

Contibutors: Bose, G. K. (author) / Mahapatra, K. K. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (738 kB)

1. TXT document (35 kB)

Estimation of the boron diffusion coefficients in FeB and Fe2B layers during the pack-boriding of...

Contibutors: Abdellah, Zahra Nait (author) / Keddam, Mourad (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

Vakuumist (2014, volume 34, issue 3)

Source: Vakuumist

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (7216 kB)

1. TXT document (72 kB)

Determining the generator potier reactance for relevant (reactive) loads

Contibutors: Kostić, Miloje (author)

Numbering: 2014, volume 81, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (419 kB)

Načrtovanje Teslovega transformatorja

Contibutors: Trbušić, Mislav (author) / Pihler, Jože (author)

Numbering: 2014, volume 81, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (807 kB)

Nobelova nagrada za fiziko 2014 in revolucija v osvetljevanju

Contibutors: Zgonik, Marko (author)

Source: Obzornik za matematiko in fiziko

Numbering: 2014, volume 61, issue 6

Provider: Društvo matematikov, fizikov in astronomov

1. PDF document (935 kB)

1. TXT document (16 kB)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Voltage summing current conveyor (VSCC) for oscillator and summing amplifier applications

Contibutors: Tekin, Sezai Alper (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2994 kB)

Eksperimenti z obločnimi zemeljskimi stiki, izvedeni v resonančno ozemljenem srednjenapetostnem o...

Contibutors: Rošer, Miran (author) / Škof, Robert (author) / Štumberger, Gorazd (author)

Numbering: 2014, volume 81, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (637 kB)

Design of an intelligent electronic system for dump truck tip-over prevention

Contibutors: Cham, Chin Leei (author) / Tan, Wooi Haw (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2172 kB)

A new method for hybrid pseudo random number generator

Contibutors: Tuncer, Taner (author) / Avaroglu, Erdinç (author) / Özer, A. Bedri (author) / Türk, Mustafa (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2068 kB)

Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy u...

Contibutors: Tolga Ozkan, Murat (author) / Ulas, Hasan Basri (author) / Bilgin, Musa (author)

Integracija odprtokodnih rešitev za avtomatizirano daljinsko upravljanje in nadzor zgradb

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

1. TXT document (38 kB)

Contibutors: Šmid, Nejc (author) / Humar, Iztok (author)

Numbering: 2014, volume 81, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (703 kB)

Transformation-induced plasticity in steel for hot stamping

Contibutors: Mašek, Bohuslav (author) / Štádler, Ctibor (author) / Jirková, Hana (author) / Feuser, Peter (author) / Selig, Mike (author)

Ljubljanska inženirska zbornica 1919-1944

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (243 kB)

1. TXT document (14 kB)

Contibutors: Di Battista, Alenka (author)

Source: Zbornik za umetnostno zgodovino (Nova vrsta)

Numbering: 2014, volume 50, issue 50

Provider: Slovensko umetnostnozgodovinsko društvo

1. PDF document (145 kB)

1. TXT document (16 kB)

Correlation between the point load index, I subs (50), and the resistance to unconfined compressi...

Contibutors: Galván, Manolo (author) / Preciado, Jorge (author) / Serón, Jose (author)

Numbering: 2014, volume 11, issue 2

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (400 kB)

Nizkonapetostni napajalni modul z galvansko ločitvijo in enofazno PFC stopnjo

Contibutors: Leban, Aleš (author) / Vončina, Danijel (author) / Zajec, Peter (author)

1. PDF document (1773 kB)

Numbering: 2014, volume 81, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Multiple regression modeling and prediction of the surface roughness in the WEDM process

Contibutors: Kulekci, Mustafa Kemal (author) / Akkurt, Adnan (author) / Esme, Ugur (author) / Ozkul, Iskender (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy

Contibutors: Çelik, Yahya Hişman (author)

1. PDF document (1441 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Dynamic modeling, characteristic analysis and co-simulation of the permanent-magnet spherical act...

Contibutors: Guo, Xiwen (author) / Zhao, Yuan (author) / Li, Yuansheng (author)

Numbering: 2014, volume 81, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (764 kB)

The influence of the platinum substrate roughness on the ferroelectric properties of 0.65Pb(Mgsub...

Contibutors: Uršič, Hana (author) / Tchernychova, Elena (author) / Benčan, Andreja (author) / Jouin, Jenny (author) / Holc, Janez (author) / Drnovšek, Silvo (author) / Hrovat, Marko (author) / Malič, Barbara (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1313 kB)

Micropreconcentrators in silicon-glass technology for the detection of diabetes biomarkers

Contibutors: Rydosz, Artur (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2820 kB)

1. TXT document (42 kB)

A counter of number of products on the shelf - Influences on capacitance of interdigitated capaci...

Contibutors: Kojić, Sanja (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1811 kB)

Characterization of a polymer-matrix composite support beam

Contibutors: Štrekelj, Neva (author) / Maren, Matevž (author) / Naglič, Iztok (author) / Demšar, Andrej (author) / Dervarič, Evgen (author) / Markoli, Boštjan (author)

1. PDF document (1239 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Wear behavior of Al/SiC/graphite and Al/FeB/graphite hybrid composites

Contibutors: Şahin, Salim (author) / Yüksel, Nilay (author) / Durmuş, Hülya (author) / Gençalp Irizalp, Simge (author)

1. PDF document (5039 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The effect of welding flux and welding wire on the microstructure and characteristics of the weld...

Contibutors: Tonkovič-Prijanovič, Marica (author) / Humar, Matjaž (author) / Bizjak, Gregor (author)

Source: RMZ-materials and geoenvironment

Numbering: 2014, volume 61, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (6294 kB)

Izzivi komunalne higiene - primer zagotavljanja zdravstveno neoporečne pitne vode

Contibutors: Sušelj Šajn, Irena (author) / Tomšič, Stanko (author) / Trebše, Polonca (author) / Ferfila, Nevenka (author)

Source: Sanitarno inženirstvo

Numbering: 2014, volume 8, posebna izdaja

Provider: Inštitut za sanitarno inženirstvo
(Obvezni izvod spletne publikacije)

1. PDF document (149 kB)

1. TXT document (39 kB)

Magnetic-field computation of a novel 3-DOF deflection-type PM motor with analytical andfinite-el...

Contibutors: Li, Zheng (author)

Numbering: 2014, volume 81, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (633 kB)

Finite element modelling of submerged arc welding process for a symmetric T-beam

Contibutors: Culha, Osman (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (256 kB)

Current transients in solution-derived amorphous Tasub2Osub5-based thin-film capacitors

Contibutors: Frunza, Raluca-Camelia (author) / Jankovec, Marko (author) / Kmet, Brigita (author) / Topič, Marko (author) / Malič, Barbara (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (979 kB)

Thermomechanical processing of micro-alloyed steel

Contibutors: Podaný, Pavel (author) / Martinek, Petr (author)

Heterogeneous MPSoC technology for modern cyber-physical systems

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (511 kB)

1. TXT document (18 kB)

Contibutors: Jóźwiak, Lech (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1273 kB)

1. TXT document (73 kB)

Monitoring stabilnosti visokih varnostnih stebrov z EL paličnimi merilci deformacij v kamnolomu L...

Contibutors: Kortnik, Jože (author) / Nwaubani, Sunny O. (author) / Kos, Andrej (author)

Numbering: 2014, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (493 kB)

Accelerated carbide spheroidisation and refinement (ASR) of the C45 steel during controlled rolling

Contibutors: Hauserova, Daniela (author) / Dlouhý, Jaromír (author) / Nový, Zbyšek (author)

1. PDF document (2102 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of different surface-heat-treatment methods on the surface properties of AISI 4140 steel

Contibutors: Ayday, Aysun (author) / Durman, Mehmet (author)

A modified heat treatment to improve the properties of double-layer cast rolls

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (886 kB)

1. TXT document (14 kB)

Contibutors: Sedlaček, Marko (author) / Podgornik, Bojan (author) / Milanović, Slobodan (author)

Low-kickback-noise preamplifier-latched comparators designed for high-speed & accurate ADCs

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (589 kB)

1. TXT document (29 kB)

Contibutors: Rezaeii, Ali Baradaran (author) / Shino, Obalit (author) / Moradi, Tohid (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2265 kB)

O "prazgodovini" slovenske televizije ob njeni 55-letnici

Contibutors: Lavrenčič, Aleksander (author)

Source: Arhivi

Numbering: 2014, volume 37, issue 1

Provider: Arhivsko društvo Slovenije

1. PDF document (509 kB)

1. TXT document (90 kB)

Settlement of weakly cemented tufas

Contibutors: Nihat, Dipova (author) / Ufuk, Ergun M. (author) / Vedat, Doyuran (author)

Optimal fractal dimension on grain structure robot laser-hardened tool steel

Numbering: 2014, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (455 kB)

1. TXT document (33 kB)

Contibutors: Babič, Matej (author) / Balič, Jože (author) / Kokol, Peter (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1412 kB)

Modelling surface degradation in hot rolling work rolls

Contibutors: Terčelj, Milan (author) / Fazarinc, Matevž (author) / Mrvar, Primož (author) / Žužek, Borut (author) / Fajfar, Peter (author)

Source: RMZ-materials and geoenvironment

Numbering: 2014, volume 61, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (3045 kB)

Optimization of the mechanical and tribological properties of extruded AMCs

Contibutors: Shabani, Mohsen Ostad (author) / Tofigh, Ali Asghar (author) / Rahimipour, Mohammad Reza (author) / Razavi, Mansour (author) / Mazahéri, Aly (author) / Heydari, Fatemeh (author)

Akku4future - measurement methods to gather data for computing state indication

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (350 kB)

1. TXT document (36 kB)

Contibutors: Elbe, Alexander (author) / Niedermayr, Florian (author) / Zander, David (author)

Mini-thixoforming of various modified states of the stock structure of tool steel X210Cr12

Numbering: 2014, volume 81, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (481 kB)

1. TXT document (13 kB)

Contibutors: Mašek, Bohuslav (author) / Vančura, Filip (author) / Jirková, Hana (author) / Böehme, Marcus (author) / Frint, Philipp (author)

1. PDF document (1320 kB)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A novel on-line inspection system for transmission lines using optical ground wires

Contibutors: Tang, Jinrui (author) / Yin, Xianggen (author) / Zhang, Zhen (author)

Effect of tunneling defects on the joint strength efficiency obtained with FSW

Numbering: 2014, volume 81, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (423 kB)

1. TXT document (19 kB)

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

A novel fault-analysis method for the power grid with inverter-interfaced distribution generators

Contibutors: Yang, Zengli (author)

Numbering: 2014, volume 81, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (450 kB)

Praktična izvedba preskusov drsne sponke za ozemljevanje vodnikov daljnovoda 110 kV

Contibutors: Maruša, Robert (author) / Voršič, Jože (author) / Pihler, Jože (author) / Ferlič, Rado (author) / Belak, Lovro (author) / Ribič, Janez (author) / Maruša, Leon (author)

Numbering: 2014, volume 81, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (899 kB)

Performance analysis of a memristor - based biquad filter using a dynamic model

Contibutors: Yener, Şuayb Çagri (author) / Mutlu, Reşat (author) / Kuntman, Hulusi Hakan (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (3747 kB)

Tribo-corrosion properties of a NiTi dental wire

Contibutors: Močnik, Petra (author) / Kosec, Tadeja (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (659 kB)

Fast one-time programming (OTP) and a programming verification solution using zener diodes in a s...

Contibutors: Trontelj, Janez (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1130 kB)

Identification of the initial failure and damage of substituents of a unidirectional fiber-reinfo...

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Sanitarno inženirstvo (2014, volume 8, issue 1)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (924 kB)

1. TXT document (15 kB)

Source: Sanitarno inženirstvo

Provider: Inštitut za sanitarno inženirstvo
(Obvezni izvod spletne publikacije)

1. PDF document (9925 kB)

1. TXT document (181 kB)

Microstructural comparison of the thermomechanically treated and cold deformed Nb-microalloyed tr...

Contibutors: Grajcar, Adam (author) / Radwański, Krzysztof (author)

1. PDF document (1897 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Delaying analogue quadrature signals in Sin/Cos encoders

Contibutors: Dogša, Tomaž (author) / Solar, Mitja (author) / Jarc, Bojan (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2483 kB)

1. TXT document (18 kB)

Impact of downscaling on analog/RF performance of sub-100nm GS-DG MOSFET

Contibutors: Sahu, P. K. (author) / Mohapatra, S. K. (author) / Pradhan, K. P. (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1473 kB)

Influence of the working technology on the development of alloys H13-w(Cu) 87.5 %

Contibutors: Artiček, Uroš (author) / Bojinović, Marko (author) / Brunčko, Mihael (author) / Anžel, Ivan (author)

1. PDF document (3355 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Energy and economic yield of photovoltaic systems

Contibutors: Brecl, Kristijan (author) / Topič, Marko (author)

1. PDF document (1262 kB)

Numbering: 2014, volume 81, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

A new FGMOS FDCCII and filter applications

Contibutors: Keleş, Sinem (author) / Kaçar, Firat (author) / Kuntman, Hulusi Hakan (author) / Keleş, Fatih (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (3200 kB)

Performance metrics for testing statistical calculations in interlaboratory comparisons

Contibutors: Ačko, Bojan (author) / Sluban, Boris (author) / Tasič, Tadej (author) / Brezovnik, Simon (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (437 kB)

Simulation of continuous casting of steel under the influence of magnetic field using the local-r...

Contibutors: Mramor, Katarina (author) / Vertnik, Robert (author) / Šarler, Božidar (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (438 kB)

Unsteady model-based predictive control of continuous steel casting by means of a very fast dynam...

Contibutors: Klimes, Lubomir (author) / Štětina, Josef (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (807 kB)

Evaluation of the mechanical properties of a hot isostatically pressed yttria-dispersed nickel-ba...

Contibutors: Mohan, Monika (author) / Subramanian, Ramanathan (author) / Alam, Muhammad Zafir (author) / Angelo, Peter Chrysologue (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (627 kB)

Research challenges in optical communications towards 2020 and beyond

Contibutors: Batagelj, Boštjan (author) / Janyani, Vijay (author) / Tomažič, Sašo (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1003 kB)

1. TXT document (35 kB)

Medsebojni vplivi med več daljnovodnimi sistemi

Contibutors: Koželj, Marijan (author)

Electrodeposition and characterization of Cu-Zn alloy films obtained from a sulfate bath

Numbering: 2014, volume 81, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (249 kB)

1. TXT document (11 kB)

Contibutors: Redjechta, Abdelouahab (author) / Loucif, Kzmel (author) / Mentar, Loubna (author) / Khelladi, Mohamed Redha (author) / Beniaiche, Abdelkrim (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (238 kB)

The influence of lamination and conductive printing inks on smart-card operability

Contibutors: Muck, Tadeja (author) / Đokić, Miloje (author) / Radonić, Vasa (author) / Mladenovič, Vladan (author) / Pleteršek, Anton (author) / Kavčič, Urška (author) / Hladnik, Aleš (author) / Crnojević-Bengin, Vesna (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (557 kB)

The effect of the firing temperature on the hardness of alumina porcelain

Contibutors: Štubňa, Igor (author) / Šín, Peter (author) / Viljus, Mart (author) / Trník, Anton (author)

1. PDF document (1241 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Hybrid Taguchi method for optimizing flux cored arc weld parameters for mild steel

Contibutors: Satheesh, M. (author) / Dhas, J. Edwin Raja (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (419 kB)

Optimization of the die-sinking micro-EDM process for multiple performance characteristics using ...

Contibutors: Kadirvel, Arumugam (author) / Hariharan, Pillai (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (142 kB)

Determining the optimal area-dependent blank holder forces in deep drawing using the response sur...

Contibutors: Volk, Mihael (author) / Nardin, Blaž (author) / Dolšak, Bojan (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1245 kB)

1. TXT document (30 kB)

Vakuumist (2014, volume 34, issue 4)

Source: Vakuumist

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (4210 kB)

1. TXT document (87 kB)

Prediction of the nugget size in resistance spot welding with a combination of a finite-element a...

Contibutors: Afshari, Davood (author) / Sedighi, Mohammad (author) / Karimi, Mohammad Reza (author) / Barsoum, Zuheir (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Experimental investigation of the surface properties obtained by cutting brass-353 (alpha + beta)...

Contibutors: Akkurt, Adnan (author)

1. PDF document (2152 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Lead zirconate titanate multi-element structure by electrophoretic deposition

Contibutors: Abellard, Andre-Pierre (author) / Kuščer, Danjela (author) / Lethiecq, Marc (author) / Grégoire, Jean Marc (author) / Malič, Barbara (author) / Levassort, Franck (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1075 kB)

1. TXT document (33 kB)

A compact 3.1-5 GHz RC feedback low-noise amplifier employing a gain enhancement tehnique

Contibutors: Djugova, Alena (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (3923 kB)

1. TXT document (40 kB)

Acta geotechnica Slovenica (2014, volume 11, issue 1)

1. PDF document (2586 kB)

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. TXT document (202 kB)

Analytical solutions for one-dimensional consolidation in unsaturated soils considering the non-D...

Contibutors: Li, Jiwei (author) / Wang, Huabin (author)

Numbering: 2014, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (296 kB)

Failure-mode transition in resistance spot welded DP780 advanced high-strength steel

Contibutors: Abadi, Mehdi Mansouri Hasan (author) / Pouranvari, Majid (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (239 kB)

Development of testing method for smart substations with prosumers

Contibutors: Korotko, Tarmo (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2039 kB)

1. TXT document (60 kB)

O "prazgodovini" slovenske televizije ob njeni 55-letnici

Contibutors: Lavrenčič, Aleksander (author)

Source: Arhivi

Numbering: 2014, volume 37, issue 2

Provider: Arhivsko društvo Slovenije

1. PDF document (489 kB)

1. TXT document (85 kB)

Fatigue-life enhancement of sheets made of 34CrNiMo6 steel

Contibutors: Džugan, Jan (author) / Nový, Zbyšek (author) / Marešová, Martina (author)

Thermal effects of a high-pressure spray descaling process

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

1. TXT document (15 kB)

Contibutors: Čarnogurská, Mária (author) / Příhoda, Miroslav (author) / Hajkr, Zdeněk (author) / Pyszko, René (author) / Toman, Zdeněk (author)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (890 kB)

Effects of ground granulated blast-furnace slag on the index and compaction parameters of clayey ...

Contibutors: Sivrikaya, Osman (author) / Yavascan, Selman (author) / Cecen, Emre (author)

Numbering: 2014, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)

1. PDF document (136 kB)

Korozijska zaščita na področju pridobivanja energentov

Contibutors: Finšgar, Matjaž (author)

Source: Vakuumist

Numbering: 2014, volume 34, issue 1

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (80 kB)

Evaluation and analysis of methods for fixed and variable MEMS inductors design

Contibutors: Banitorfian, Fatema (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (4976 kB)

1. TXT document (59 kB)

Supercapacitor energy storage system for improving the power flow in photovoltaic plants

Contibutors: Guerrero-Martínez, Miguel Ángel (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (3929 kB)

1. TXT document (38 kB)

Thermocyclic- and static-failure criteria for single-crystal superalloys of gas-turbine blades

Contibutors: Getsov, Leonid (author) / Semenov, Artem (author) / Tikhomirova, Elena A. (author) / Rybnikov, Alexandr (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (249 kB)

Sneak path current equivalent circuits and reading margin analysis of complementary resistive swi...

Contibutors: Karakulak, Ertugrul (author) / Mutlu, Reşat (author) / Uçar, Erdem (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 3

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2437 kB)

Influence of welding speed on the melting efficiency of Nd:YAG laser welding

Contibutors: Tadamalle, A. P. (author) / Reddy, Y. P. (author) / Ramjee, E. (author) / Reddy, V. K. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1468 kB)

1. TXT document (29 kB)

Integrated Hall magnetic angle sensors

Contibutors: Popović, Radivoje S. (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1069 kB)

1. TXT document (30 kB)

Formation of thick SU-8 mold for the fabrication of UV-LIGA based nickel microgyroscope structures

Contibutors: Jain, Ankush (author) / Gopal, Ram (author)

Source: Informacije MIDEM

Numbering: 2014, volume 44, issue 4

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (2580 kB)

1. TXT document (18 kB)

A new method for estimating the Hurst exponent H for 3D objects

Contibutors: Babič, Matej (author) / Kokol, Peter (author) / Guid, Nikola (author) / Panjan, Peter (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (470 kB)

A cost-effective approach to the rapid fabrication of functional metal prototypes

Contibutors: Kuo, Chil-Chyuan (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (251 kB)

Cast cellular metals with regular and irregular structures

Contibutors: Bednářová, Vlasta (author) / Lichý, Petr (author) / Elbel, Tomáš (author) / Hanus, Aleš (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (938 kB)

Influence of temperature and binder content on the properties of a sintered product based on red mud

Contibutors: Krgović, Milun (author) / Bošković, Ivana (author) / Zejak, Radomir (author) / Knežević, Miloš (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (845 kB)

1. TXT document (13 kB)

Welding of the steel grade S890QL

Contibutors: Celin, Roman (author) / Bernetič, Jure (author) / Skobir Balantič, Danijela Anica (author)