Digitalna knjižnica Slovenije

Using a genetic algorithm to produce slogans

Numbering: 2015, volume 39, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (608 kB)

1. TXT document (55 kB)

Contibutors: Tomašič, Polona (author) / Papa, Gregor (author) / Žnidaršič, Martin (author)

Optimizacija denarnih tokov pri gradnji cest z genetskim algoritmom

Numbering: 2015, volume 39, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (486 kB)

1. TXT document (34 kB)

Contibutors: Šetinc, Marko (author) / Kočevar, Heda (author) / Gradišar, Miro (author)

Source: Organizacija (Kranj)

Numbering: 2009, volume 42, issue 6

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (357 kB)

Optimum bushing length in thermal drilling of galvanized steel using artificial neural network co...

Contibutors: Hynes, Navasingh Rajesh Jesudoss (author) / Kumar, Ramar (author) / Sujana, Jebaraj Angela Jennifa (author)

1. PDF document (2122 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (86 kB)

Stopping criteria for a constrained single-objective particle swarm optimization algorithm

Contibutors: Zielinski, Karin (author) / Laur, Rainer (author)

Prediction of surface roughness in the ball-end milling process using response surface methodolog...

Numbering: 2007, volume 31, issue 1

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (183 kB)

1. TXT document (34 kB)

Contibutors: Sekulić, Milenko (author) / Pejić, Vlastimir (author) / Brezočnik, Miran (author) / Gostimirović, Marin (author) / Hadžistević, Miodrag (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (818 kB)

1. TXT document (44 kB)

Načrtovanje razvoja vodovodnih sistemov z uporabo genetskih algoritmov

Contibutors: Steinman, Franci (author) / Banovec, Primož (author) / Šantl, Sašo (author)

Towards crafting an improved functional link artificial neural network based on differential evol...

Numbering: 2001, volume 47, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (828 kB)

1. TXT document (51 kB)

Contibutors: Dash, Ch. Sanjeev Kumar (author)

Coupling functions treatment in a Bi-Level optimization process

Numbering: 2015, volume 39, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (469 kB)

1. TXT document (55 kB)

Contibutors: Guédas, Benoît (author) / Dépincé, Philippe (author)

A heuristic search algorithm for flow-shop scheduling

Numbering: 2008, volume 54, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (319 kB)

1. TXT document (45 kB)

Contibutors: Poh-Onn Fan, Joshua (author) / Winley, Graham K. (author)

Experimental comparisons of multi-class classifiers

Numbering: 2008, volume 32, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (217 kB)

1. TXT document (57 kB)

Contibutors: Lin, Li (author) / Wu, Yue (author) / Ye, Mao (author)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Numbering: 2015, volume 39, issue 1

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (313 kB)

1. TXT document (74 kB)

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

Sistem za spremljanje in optimiranje postopka frezanja z uporabo genetskih algoritmov

Contibutors: Milfelner, Matjaž (author) / Čuš, Franc (author)

Implicit and explicit averaging strategies for simulation-based optimization of a real-world prod...

Numbering: 2004, volume 50, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (993 kB)

1. TXT document (53 kB)

Contibutors: Diaz, Juan Esteban (author) / Handl, Julia (author)

Numbering: 2015, volume 39, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (386 kB)

Dietary menu planning using an evolutionary method

Contibutors: Koroušić-Seljak, Barbara (author)

Optimization of the machining parameters in the electrochemical micro-machining of nickel

Numbering: 2007, volume 74, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (155 kB)

1. TXT document (26 kB)

Contibutors: Krishnan, Rajendiran (author) / Duraisamy, Saravanan (author) / Palanisamy, Parthiban (author) / Veeramani, Anandakrishnan (author)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (503 kB)

Evaluating the effectiveness of mutation operators on the behaviour of geneticalgorithms applied ...

Contibutors: Hasan, Basima Hani F. (author) / Saleh, Moutaz Saleh M. (author)

Tuning of fuzzy logic controller with genetic algorithm

Numbering: 2011, volume 35, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (204 kB)

1. TXT document (28 kB)

Contibutors: Zupančič, Borut (author) / Klopčič, Marko (author) / Karba, Rihard (author)

An inventory model with METRIC approach in location-routing-inventory problem

Numbering: 1999, volume 23, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (530 kB)

1. TXT document (20 kB)

Contibutors: Gholamian, M. R. (author) / Heydari, M. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (713 kB)

1. TXT document (35 kB)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Emergent synthesis based multi-objective design of the manufacturing system shop-floor

Contibutors: Car, Zlatan (author) / Barišić, Branimir (author) / Rucki, Miroslaw (author)

A numerical simulation of metal injection moulding

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (642 kB)

1. TXT document (28 kB)

Contibutors: Berginc, Boštjan (author) / Brezočnik, Miran (author) / Kampuš, Zlatko (author) / Šuštaršič, Borivoj (author)

1. PDF document (1692 kB)

Numbering: 2009, volume 43, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Reševanje problemov zlaganja z uporabo simuliranega izničenja in genetskih algoritmov

Contibutors: Gomez, Alberto (author) / De la Fuente, David (author) / Puente, Javier (author) / Parreno, José (author)

Word sense disambiguation using an evolutionary approach

Numbering: 2005, volume 51, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (100 kB)

1. TXT document (22 kB)

Contibutors: Menai, Mohamed El Bachir (author)

1. PDF document (1461 kB)

Numbering: 2014, volume 38, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. TXT document (60 kB)

Comparing evolutionary operators, search spaces, and evolutionary algorithms in the construction ...

Contibutors: Mist, Joseph James (author) / Gibson, Stuart James (author) / Solomon, Christopher John (author)

Multi-objective power-generation scheduling

Numbering: 2015, volume 39, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (815 kB)

1. TXT document (47 kB)

Contibutors: Gjorgiev, Blaže (author) / Čepin, Marko (author) / Volkanovski, Andrija (author) / Kančev, Duško (author)

Numbering: 2013, volume 80, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (740 kB)

Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...

Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (943 kB)

1. TXT document (47 kB)

Inter programming models for the target visitation problem

Contibutors: Hildenbrandt, Achim (author) / Reinelt, Gerhard (author)

Ustvarjanje modela rezalnih sil z uporabo umetne inteligence

Numbering: 2015, volume 39, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (228 kB)

1. TXT document (16 kB)

Contibutors: Milfelner, Matjaž (author) / Župerl, Uroš (author) / Čuš, Franc (author)

Evaluation of the surface integrity in the milling of a magnesium alloy using an artificial neura...

Numbering: 2005, volume 51, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (362 kB)

1. TXT document (47 kB)

Contibutors: Pradeepkumar, Madhesan (author) / Venkatesan, Rajamanickam (author) / Kaviarasan, Varatharajan (author)

1. PDF document (1445 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Optimizacija procesnih parametrov pri kontinuiranem ulivanju jekla v železarni ACRONI Jesenice (1997, volume 31, issue 5)

Contibutors: Filipič, Bogdan (author) / Šarler, Božidar (author)

Source: Kovine zlitine tehnologije

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1033 kB)

1. TXT document (25 kB)

Oblikovanje prilagodljivega obdelovalnega sistema z genetskimi algoritmi

Contibutors: Ficko, Mirko (author) / Brezočnik, Miran (author) / Balič, Jože (author)

1. PDF document (1011 kB)

Numbering: 2005, volume 51, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (48 kB)

Optimizacija indukcijskega segrevanja z numeričnim modeliranjem in genetskim algoritmom

Contibutors: Kranjc, Matej (author) / Županič, Anže (author) / Jarm, Tomaž (author) / Miklavčič, Damijan (author)

Designing global behavior in multi-agent systems using evolutionary computation

Numbering: 2009, volume 76, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (897 kB)

1. TXT document (25 kB)

Contibutors: Privošnik, Marko (author)

1. PDF document (1254 kB)

Numbering: 2013, volume 80, issue 5

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

Multimodal score-level fusion using hybrid GA-PSO for multibiometric system

Contibutors: Cherifi, Dalila (author) / Hafnaoui, Imane (author) / Nait-Ali, Amine (author)

Numbering: 2015, volume 39, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (665 kB)

A bi-objective inspection policy optimization model for finite-life repairable systems using a ge...

Contibutors: Ramadan, S. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (616 kB)

1. TXT document (37 kB)

Razporejanje električne energije v aktivnih distribucijskih omrežjih z uporabo kombiniranega opti...

Contibutors: Corn, Marko (author) / Černe, Gregor (author) / Škrjanc, Igor (author) / Atanasijević-Kunc, Maja (author)

Numbering: 2013, volume 80, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (544 kB)

Večkriterialno optimiranje avtomobilske konstrukcije z uporabo metode končnih elementov

Contibutors: Glavač, Matej (author) / Ren, Zoran (author)

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (304 kB)

Izboljšanje dinamičnih značilnosti rotorskega sistema z razvojnim algoritmom

Contibutors: Saruhan, Hamit (author)

Optimiranje pretoka naročil v prilagodljivih obdelovalnih sistemih z genetskimi algoritmi

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (971 kB)

1. TXT document (54 kB)

Contibutors: Pahole, Ivo (author) / Ficko, Mirko (author) / Drstvenšek, Igor (author) / Balič, Jože (author)

A genetic regulatory network-based sequencing method for mixed-model assembly lines

Numbering: 2003, volume 49, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (778 kB)

1. TXT document (34 kB)

Contibutors: Lv, Y. (author) / Zhang, J. (author) / Qin, W. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (654 kB)

1. TXT document (43 kB)

Using genetic algorithms and dominance concepts for generating reduced test data

Contibutors: Ghiduk, Ahmed S. (author) / Girgis, Moheb R. (author)

Numbering: 2010, volume 34, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (155 kB)

1. TXT document (43 kB)

Genetski algoritmi

Contibutors: Filipič, Bogdan (author)

Adaptivni računalniški model skupinskega vedenja plena ob napadu plenilca

Numbering: 1992, volume 16, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (909 kB)

1. TXT document (40 kB)

Contibutors: Grbec, Dejan (author) / Demšar, Jure (author) / Lebar Bajec, Iztok (author)

Izbira merilnih mest v vodovodnih sistemih z genetskimi algoritmi

Numbering: 2016, volume 83, issue 4

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (985 kB)

1. TXT document (46 kB)

Contibutors: Banovec, Primož (author) / Kozelj, Daniel (author) / Šantl, Sašo (author) / Steinman, Franci (author)

Determination of accuracy contour and optimization of workpiece positioning for robot milling

Numbering: 2006, volume 52, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (218 kB)

1. TXT document (73 kB)

Contibutors: Gotlih, Janez (author) / Brezočnik, Miran (author) / Balič, Jože (author) / Karner, Timi (author) / Razboršek, Boštjan (author) / Gotlih, Karl (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1727 kB)

1. TXT document (41 kB)

Development of an algorithm for determining of genetic risk at the primary healthcare level - a n...

Contibutors: Selič, Polona (author) / Klemenc-Ketiš, Zalika (author) / Zelko, Erika (author) / Kravos, Andrej (author) / Rifel, Janez (author) / Makivić, Irena (author) / Poplas-Susič, Tonka (author) / Tevžič, Špela (author) / Cerovič, Metka (author) / Peterlin, Borut (author) / Kopčavar Guček, Nena (author)

Source: Zdravstveno varstvo

Numbering: 2020, volume 59, issue 1

Provider: Nacionalni inštitut za javno zdravje
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

Gnezdeni genetski algoritmi pri določanju parametrov Jiles-Atherton histereznega modela mehkomagn...

Contibutors: Zidarič, Bogomir (author) / Miljavec, Damijan (author)

Source: Informacije MIDEM

Numbering: 2005, volume 35, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale

1. PDF document (393 kB)

1. TXT document (18 kB)

Optimization method for control of voltage level and active power losses based on optimal distrib...

Contibutors: Vukobratović, Marko (author) / Marić, Predrag (author) / Hederić, Željko (author)

Source: JET on-line
Journal of energy technology

Numbering: 2013, volume 6, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (939 kB)

Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperatur...

Contibutors: Savković, Borislav (author) / Kovač, Pavel (author) / Rodic, D. (author) / Strbac, Branko (author) / Klančnik, Simon (author)

Source: Advances in production engineering and management

Numbering: 2020, volume 15, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1708 kB)

1. TXT document (56 kB)

Optimizacija načrtovanja vodooskrbnih sistemov z uporabo genetskih algoritmov

Contibutors: Simpson, Angus R. (author)

Source: Acta hydrotechnica

Numbering: 2000, volume 18, issue 29

Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo
(Obvezni izvod spletne publikacije)

1. PDF document (126 kB)

1. TXT document (30 kB)

Modelling and optimization of sulfur addition during 70MnVS4 steelmaking: An industrial case study

Contibutors: Kovačič, Miha (author) / Lešer, B. (author) / Brezočnik, Miran (author)

Source: Advances in production engineering and management

Numbering: 2021, volume 16, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (551 kB)

1. TXT document (45 kB)

Application of genetic algorithm into multicriteria batch manufacturing scheduling

Contibutors: Slak, Aleš (author) / Tavčar, Jože (author) / Duhovnik, Jože (author)

Optimization of the energy efficiency of a piston compressed air engine

Numbering: 2011, volume 57, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (690 kB)

1. TXT document (51 kB)

Contibutors: Yu, Qihui (author) / Cai, Maolin (author) / Shi, Yan (author) / Fan, Zichuan (author)

1. PDF document (1328 kB)

Numbering: 2014, volume 60, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Reliability-based design optimization of pump penetration shell accounting for material and geome...

Contibutors: Velayudhan, Gautham (author) / Venugopal, Prabhu Raja (author) / Gnanasigamony Thankareathenam, Ebron Shaji (author) / Selvakumar, Mohanraj (author) / Pudukarai Ramaswamy, Thyla (author)

1. PDF document (2020 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Priporočila diagnostike in zdravljenja raka dojk

Contibutors: Blatnik, Ana (author) / Perhavec, Andraž (author, editor)

Source: knjige

Provider: Narodna in univerzitetna knjižnica
(Obvezni izvod spletne publikacije)

1. PDF document (2081 kB)

1. TXT document (138 kB)

JPEG file (78 kB)

Use of genetic algorithms for optimal design of sandwich panels subjected to underwater shock loa...

Contibutors: Salimi, Hamidreza (author) / Saranjam, Bahador (author) / Fard, Ahmad Hoseini (author) / Ahmadzadeh, Mohsen (author)

1. PDF document (2361 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Taguchi-based and intelligent optimisation of a multi-response process using historical data

Contibutors: Šibalija, Tatajana (author) / Majstorović, Vidosav D. (author) / Soković, Mirko (author)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (379 kB)

Optimization of intervening variables in microEDM of SS 316L using a genetic algorithm and respon...

Contibutors: Suresh, Periyakgounder (author) / Venkatesan, Rajamanickam (author) / Sekar, Tamilperruvalathan (author) / Elango, Natarajan (author) / Sathiyamoorthy, Varatharajan (author)

1. PDF document (1675 kB)

Numbering: 2014, volume 60, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Synthesis of truss structure designs by NSGA-II and NodeSort algorithm

Contibutors: Stanković, Tino (author) / Štorga, Mario (author) / Marjanović, Dorian (author)

1. PDF document (1266 kB)

Numbering: 2012, volume 58, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Improved integration of renewable energy sources with the participation of active customers

Contibutors: Corn, Marko (author) / Černe, Gregor (author) / Papič, Igor (author) / Atanasijević-Kunc, Maja (author)

1. PDF document (1580 kB)

Numbering: 2014, volume 60, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Global criterion method based on principal components to the optimization of manufacturing proces...

Contibutors: Freitas Gomes, José Henrique de (author) / Salgado Júnior, Aluizio Ramos (author) / Paiva, Anderson Paulo de (author) / Ferreira, Joao Roberto (author) / Costa, Sebastiao Carlos da (author) / Balestrassi, Pedro Paulo (author)

Numbering: 2012, volume 58, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (977 kB)

Multi-objective optimization of cloud manufacturing service composition with cloud-entropy enhanc...

Contibutors: Li, Yongxiang (author) / Yao, Xifan (author) / Zhou, Jifeng (author)

Scheduling for a single-terminal intermodal system recovery with Poisson arrivals

Numbering: 2016, volume 62, nr. 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

1. TXT document (60 kB)

Contibutors: Marković, Nikola (author) / Schonfeld, Paul (author)

Numbering: 2013, volume 59, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (966 kB)

Solving JSSP by introducing hamilton similarity and time dependent fitness scaling

Contibutors: Abrashi, Arijan (author) / Štefanić, Nedjeljko (author) / Lisjak, Dragutin (author)

Numbering: 2010, volume 56, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (449 kB)

Deformation analysis: the modified GREDOD method

Contibutors: Batilović, Mehmed (author) / Kanović, Željko (author) / Sušić, Zoran (author) / Marković, Marko Z. (author) / Bulatović, Vladimir (author)

Source: Geodetski vestnik

Numbering: 2022, volume 66, issue 1

Provider: Zveza geodetov Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (1078 kB)

1. TXT document (51 kB)

Creation of facial composites from user selections using image gradients

Contibutors: García-Zurdo, Rubén (author)

A hybrid discrete artificial bee colony for the green pickup and delivery problem with time windows

Numbering: 2020, volume 44, issue 1

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (509 kB)

1. TXT document (37 kB)

Contibutors: Mounia, Djebbar Amel (author) / Djebbar, Bachir (author)

PSO with crossover operator applied to feature selection problem in classification

Numbering: 2020, volume 44, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (434 kB)

1. TXT document (62 kB)

Contibutors: Hichem, Houassi (author) / Rafik, Mehdaoui (author) / Mesaaoud, Maarouk Toufik (author)

Numbering: 2018, volume 42, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (554 kB)

1. TXT document (48 kB)

Bio-IR-M

Contibutors: Zeghida, Djamel (author) / Meslati, Djamel (author) / Bounour, Nora (author)

A comparative study of automatic programming techniques

Numbering: 2018, volume 42, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (648 kB)

1. TXT document (75 kB)

Contibutors: Arslan, Sibel (author) / Öztürk, Celal (author)

Evolving and training of neural network to play DAMA board game using NEAT algorithm

Numbering: 2019, volume 43, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (755 kB)

1. TXT document (39 kB)

Contibutors: Qader, Banaz Anwer (author) / Jihad, Kamal H. (author) / Baker, Mohammed Rashad (author)

Application of interactive genetic algorithm in landscape planning and design

Numbering: 2022, volume 46, issue 5

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (642 kB)

1. TXT document (40 kB)

Contibutors: Li, Boyang (author) / Sharma, Ashutosh (author)

1. PDF document (2611 kB)

Numbering: 2022, volume 46, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

Intelligent analysis and processing technology of big data based on clustering algorithm

Contibutors: Zheng, Zheng (author)

Numbering: 2022, volume 46, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (937 kB)

Extreme learning machines with feature selection using GA for effective prediction of fetal heart...

Contibutors: Panda, Debjani (author)

Iskanje stanja napolnjenosti baterijske celice s pomočjo genetskega algoritma in ESC modela baterije

Numbering: 2021, volume 45, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (550 kB)

1. TXT document (42 kB)

Contibutors: Antončič, Marko (author) / Šafarič, Riko (author) / Korez, Kristijan (author) / Globevnik, Miran (author)

Source: Zbornik mednarodne Elektrotehniške in računalniške konference

Numbering: 2021,

Provider: Slovenska sekcija IEEE
(Obvezni izvod spletne publikacije)

1. PDF document (554 kB)

1. TXT document (15 kB)

Stanje napolnjenosti baterijske celice na osnovi ESC modela nadgrajenega s povratno zanko in gene...

Contibutors: Korez, Kristijan (author) / Globevnik, Miran (author) / Antončič, Marko (author) / Šafarič, Riko (author)

Source: Zbornik mednarodne Elektrotehniške in računalniške konference

Numbering: 2021,

Provider: Slovenska sekcija IEEE
(Obvezni izvod spletne publikacije)

1. PDF document (3312 kB)

1. TXT document (12 kB)

Štetje objektov na slikah z uporabo genetskega algoritma

Contibutors: Babnik, Gregor (author) / Šajn, Luka (author)

Source: Zbornik mednarodne Elektrotehniške in računalniške konference

Numbering: 2020,

Provider: Slovenska sekcija IEEE
(Obvezni izvod spletne publikacije)

1. PDF document (295 kB)

1. TXT document (18 kB)

A Nature-Inspired Implementation of the Computer Opponent in the Arcade Computer Game of Darts

Contibutors: Tovornik, Nina (author) / Fister, Iztok (author) / Podgorelec, Vili (author) / Brezočnik, Lucija (author)

Uporaba heterogenih računalniških sistemov za molekulsko sidranje

Numbering: 2023, volume 90, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (717 kB)

1. TXT document (26 kB)

Contibutors: Sluga, Davor (author) / Erent, Tine (author) / Jukič, Marko (author) / Podlipnik, Črtomir (author) / Ilc, Nejc (author)

1. PDF document (8256 kB)

Numbering: 2023, volume 90, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Genetic algorithm optimized neural networks ensemble for estimation of mefenamic acid and paracet...

Contibutors: Dondeti, Satyanarayana (author) / Kannan, Kamarajan (author) / Manavalan, Rajappan (author)

A QSPR study of boiling point of saturated alchohols using genetic algorithm

Numbering: 2005, volume 52, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (494 kB)

1. TXT document (41 kB)

Contibutors: Kompany-Zareh, Mohsen (author)

Numbering: 2003, volume 50, issue 2

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (223 kB)

QSAR analysis of 1,1-dioxoisothiazole and benzobthiophene-1,1-dioxide derivatives as novel inhibi...

Contibutors: Chen, Ke-Xian (author) / Xie, Hai-Ying (author) / Li, Zu-Guang (author)

Numbering: 2009, volume 56, issue 3

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (445 kB)

Use of genetic algorithm for fitting Sovova's mass transfer model

Contibutors: Hrnčič, Dejan (author) / Mernik, Marjan (author) / Knez Hrnčič, Maša (author)

Preprečevanje neizvedljivosti urnikov pri metahevrističnem razvrščanju proizvodnih procesov

Numbering: 2010, volume vol 57, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (720 kB)

1. TXT document (39 kB)

Contibutors: Murovec, Boštjan (author) / Šuhel, Peter (mentor)

Provider: Univerza v Ljubljani, Fakulteta za elektrotehniko

1. PDF document (913 kB)

1. TXT document (329 kB)

Dostop v Repozitoriju Univerze

A new approach to optimization of test pattern generator structure

Contibutors: Papa, Gregor (author) / Garbolino, Tomasz (author)

Source: Informacije MIDEM

Numbering: 2008, volume 38, issue 1

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale

1. PDF document (325 kB)

1. TXT document (26 kB)

Towards smaller single-point failure-resilient analog circuits by use of a genetic algorithm

Contibutors: Rojec, Žiga (author)

Source: Informacije MIDEM

Numbering: 2023, volume 53, issue 2

Provider: Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale
(Obvezni izvod spletne publikacije)

1. PDF document (1098 kB)

1. TXT document (53 kB)

Improved genetic algorithm in multi-objective cargo logistics loading and distribution

Contibutors: He, Zhilin (author)

Numbering: 2023, volume 47, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (537 kB)

Genetic algorithm-based optimization of the laser-beam path in additive manufacturing

Contibutors: Potočnik, Primož (author) / Jeromen, Andrej (author) / Govekar, Edvard (author)

1. PDF document (1328 kB)

Numbering: 2024, volume 58, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Optimal path planning of logistics distribution of urban and rural agricultural products from the...

Contibutors: Wang, Xiumei (author) / Song, Xiaoli (author)

Numbering: 2023, volume 47, issue 5

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (353 kB)

Optimizing sequential forward selection on classification using genetic algorithm

Contibutors: Chotchantarakun, Knitchepon (author)

Non-dominated sorting genetic optimization-based fog cloudlet computing for wireless metropolitan...

Numbering: 2023, volume 47, issue 9

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (415 kB)

1. TXT document (56 kB)

Contibutors: Alasady, Ali Salah (author) / Awadh, Wid Akeel (author) / Hashim, Mohammed S. (author)

Numbering: 2023, volume 47, issue 10

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (441 kB)

Incorporation of a simplified mechanical joint model into numerical analysis

Contibutors: Glavan, Mitja (author) / Klemenc, Jernej (author) / Malnarič, Vili (author) / Šeruga, Domen (author)

Optimization of in-vehicle carbon dioxide level in a 5-seat car

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (845 kB)

1. TXT document (42 kB)

Contibutors: Jayasankar, Prabhakaran (author) / Subbaian, Jayabal (author)

1. PDF document (5552 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (48 kB)

Optimization in the resistant spot-welding process of AZ61 magnesium alloy

Contibutors: Afshari, Davood (author) / Ghaffari, Ali (author) / Barsum, Zuheir (author)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (819 kB)

Animation VR scene stitching modeling based on genetic algorithm

Contibutors: Chen, Danping (author)

Optimization of asynchronous parallel tasks scheduling with multi-resource constraints

Numbering: 2024, volume 48, issue 5

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (492 kB)

1. TXT document (59 kB)

Contibutors: Xinyu, Zhang (author)

Intelligent environment design for indoor spaces based on perception and behavior correlation

Numbering: 2024, volume 48, issue 7

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (991 kB)

1. TXT document (43 kB)

Contibutors: Xue, Xiaomin (author)

Design of intelligent construction system for assembly building based on improved IoT

Numbering: 2024, volume 48, issue 9

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (417 kB)

1. TXT document (46 kB)

Contibutors: Wang, Juan (author)

Digital tourism recommendation and route planning model design based on RippleNet and Improved GA

Numbering: 2024, volume 48, issue 10

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (422 kB)

1. TXT document (57 kB)

Contibutors: Li, Yanping (author)