Number of hits: 79
Source type
journals (69)
theses and dissertations (10)
Journals - titles
Acta agriculturae Slovenica (1)
Acta chimica slovenica (4)
Acta geotechnica Slovenica (1)
Acta silvae et ligni (1)
Advances in production engineering and management (1)
Ars mathematica contemporanea (1)
Blejske delavnice iz fizike (1)
Elektrotehniški vestnik (1)
Farmacevtski vestnik (1)
Fizioterapija (Ljubljana) (1)
JET on-line (1)
Journal of energy technology (1)
Livarski vestnik (3)
Materiali in tehnologije (38)
Muzikološki zbornik (1)
Obzornik zdravstvene nege (1)
Rehabilitacija (Ljubljana) (4)
Slovenian veterinary research (1)
Strojniški vestnik (2)
Tekstilec (4)
Ventil (Ljubljana) (1)
Journals - form
articles (69)
Language
english (65)
slovenian (21)
Date
2016 (79)odstrani
Location
Društvo livarjev Slovenije (3)
Društvo matematikov, fizikov in astronomov (1)
Elektrotehniška zveza Slovenije (1)
Gozdarski inštitut Slovenije (1)
Inštitut za kovinske materiale in tehnologije (38)
Slovensko farmacevtsko društvo (1)
Slovensko kemijsko društvo (4)
Univerza na Primorskem, Fakulteta za naravoslovje, matematiko in informacijske tehnologije (1)
Univerza v Ljubljani, Biotehniška fakulteta (3)
Univerza v Ljubljani, Fakulteta za farmacijo (2)
Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo (2)
Univerza v Ljubljani, Fakulteta za matematiko in fiziko (1)
Univerza v Ljubljani, Fakulteta za strojništvo (3)
Univerza v Ljubljani, Filozofska fakulteta (1)
Univerza v Ljubljani, Naravoslovnotehniška fakulteta (5)
Univerza v Ljubljani, Veterinarska fakulteta (1)
Univerza v Mariboru, Fakulteta za energetiko (1)
Univerza v Mariboru, Fakulteta za gradbeništvo (1)
Univerza v Mariboru, Fakulteta za kemijo in kemijsko tehnologijo (1)
Univerza v Mariboru, Fakulteta za strojništvo (1)
Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (1)
Univerzitetni rehabilitacijski inštitut RS – Soča (4)
Zbornica zdravstvene in babiške nege Slovenije - Zveza strokovnih društev medicinskih sester, babic in zdravstvenih tehnikov Slovenije (1)
Združenje fizioterapevtov Slovenije (1)
Content
Agriculture (3)
Botanics (1)
Chemical Engineering (20)
Chemistry (4)
Construction (2)
Engineering and Technology (25)
Industry, Craft, Handicraft (6)
Mathematics (1)
Medicine (10)
Music (1)
Natural sciences (1)
Physics (6)
Publisher
A. Matavž (1)
A. Varlec (1)
Biotehniška fakulteta (1)
Biotehniška fakulteta, Oddelek za gozdarstvo in obnovljive gozdne vire (1)
Biotehniška fakulteta, Oddelek za lesarstvo (1)
DMFA, založništvo (1)
Društvo livarjev Slovenije (3)
fA. Plošnik (1)
Fakulteta za energetiko (1)
Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo (1)
Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (1)
Gozdarski inštitut Slovenije, založba Silvae Slovenica (1)
Inštitut za kovinske materiale in tehnologije (38)
J. Smolar (1)
L. Avsenik (1)
L. Zajec (1)
M. Zupan (1)
N. Velkova (1)
S. Rožman (1)
Slovensko farmacevtsko društvo (1)
Slovensko kemijsko društvo (4)
Splošno združenje tekstilne industrije (3)
Strokovna zadruga koncesijoniranih elektrotehnikov (1)
Univerza na Primorskem, Fakulteta za matematiko, naravoslovje in informacijske tehnologije (1)
Univerza v Ljubljani, Fakulteta za strojništvo (1)
Univerzitetni rehabilitacijski inštitut Slovenije - Soča (4)
V. Vasiljević (1)
Veterinarska fakulteta (1)
Zbornica zdravstvene nege (1)
Združenje fizioterapevtov Slovenije (1)
Znanstvena založba Filozofske fakultete (1)
Zveza inženirjev in tehnikov tekstilcev (3)
Zveza strojnih inženirjev in tehnikov Slovenije etc. (2)
Rights
CC BY – Attribution (10)
CC BY-NC-ND - Attribution, Non-Commercial, No Derivatives (1)
CC BY-SA - Attribution, ShareAlike (1)
In Copyright (67)
Access
Public (69)
Restricted (designated terminals) (9)
Viewer (1)
Search in (79)
Sort by:
Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint
Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (792 kB)
1. TXT document (30 kB)
Influence of structural defects on the magnetic properties of massive amorphous Fesub60Cosub10Mos...
Contibutors: Gondro, Joanna (author) / Bloch, Katarzyna (author) / Nabiałek, Marcin (author) / Garus, Sebastian (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (576 kB)
1. TXT document (24 kB)
The phenomenon of reduced plasticity in low-alloyed copper
Contibutors: Ozgowicz, Wojciech (author) / Kalinowska-Ozgowicz, Elżbieta (author) / Grzegorczyk, Barbara (author) / Lenik, Klaudiusz (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (5127 kB)
1. TXT document (25 kB)
Physicochemical properties of a Ti67 alloy after EO and steam sterilization
Contibutors: Walke, Witold (author) / Basiaga, Marcin (author) / Paszenda, Zbigniew (author) / Marciniak, Jan (author) / Karasinski, Paweł (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (938 kB)
1. TXT document (30 kB)
Limits on hadron spectrum from bulk medium properties
Contibutors: Broniowski, Wojciech Bogdan (author)
Source: Blejske delavnice iz fizike
Numbering: 2016, volume 17, issue 1
Provider: Društvo matematikov, fizikov in astronomov
1. PDF document (351 kB)
1. TXT document (10 kB)
Investigation of the adhesion and wear properties of borided AISI H10 steel
Contibutors: Gunes, Ibrahim (author) / Ozcatal, Melih (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2407 kB)
1. TXT document (25 kB)
Effect of direct cooling conditions on the microstructure and properties of hot-forged HSLA steel...
Contibutors: Skubisz, Piotr (author) / Lisiecki, Łukasz (author) / Skowronek, Tadeusz (author) / Żak, Artur (author) / Zalecki, Wladysław (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2259 kB)
1. TXT document (30 kB)
Effect of the skin-core morphology on the mechanical properties of injection-moulded parts
Contibutors: Hnatkova, Eva (author) / Dvorak, Zdenek (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1348 kB)
1. TXT document (18 kB)
Mechanical properties of polyamide/carbon-fiber-fabric composites
Contibutors: Ban, Cristina-Elisabeta (author) / Pelin, George (author) / Stefan, Adriana (author) / Andronescu, Ecaterina (author) / Dinca, Ion (author) / Ficai, Anton (author) / Truşca, Roxana (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (952 kB)
1. TXT document (30 kB)
Growth of K2subCO3sub-doped KDP Crystal from an aqueous solution and an investigation of its phys...
Contibutors: Rousta, Abrisham (author) / Dizaji, Hamid Rezagholipour (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (416 kB)
1. TXT document (16 kB)
Characteristics of the AlTiCrN+DLC coating deposited with a cathodic arc and the PACVD process
Contibutors: Lukaszkowicz, Krzysztof (author) / Jonda, Ewa (author) / Sondor, Jozef (author) / Balin, Katarzyna (author) / Kubacki, Jerzy (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2849 kB)
1. TXT document (32 kB)
Characterisation of the mechanical and corrosive properties of newly developed glass-steel compos...
Contibutors: Lyubimova, Olga (author) / Gridasova, Ekaterina (author) / Gridasov, Alexander (author) / Frieling, Gerrit (author) / Klein, Martin (author) / Walther, Frank (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1543 kB)
1. TXT document (21 kB)
Multi-walled carbon nanotubes effect in polypropylene nanocomposites
Contibutors: Ban, Cristina-Elisabeta (author) / Stefan, Adriana (author) / Dinca, Ion (author) / Pelin, George (author) / Ficai, Anton (author) / Andronescu, Ecaterina (author) / Oprea, Ovidiu (author) / Voicu, Georgeta (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1567 kB)
1. TXT document (25 kB)
Forming-limit diagrams and strain-rate-dependent mechanical properties of AA6019-T4 and AA6061-T4...
Contibutors: Çavuşoglu, Onur (author) / Leacock, Alan Gordon (author) / Gürün, Hakan (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1015 kB)
1. TXT document (25 kB)
The effect of high-speed grinding technology on the properties of fly ash
Contibutors: Dvořák, Karel (author) / Hájková, Iveta (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1273 kB)
1. TXT document (26 kB)
Fizikalne lastnosti polimerov v farmaciji - ali jih poznamo?
Contibutors: Draksler, Petra (author) / Lamešić, Dejan (author) / Janković, Biljana (author)
Source: Farmacevtski vestnik
Numbering: 2016, volume 67, issue 4
Provider: Slovensko farmacevtsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (290 kB)
1. TXT document (30 kB)
Study of the properties and hygrothermal behaviour of alternative insulation materials based on n...
Contibutors: Zach, Jiří (author) / Reif, Martina (author) / Hroudová, Jitka (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (156 kB)
1. TXT document (19 kB)
Modeling of shot-peening effects on the surface properties of a (TiB + TiC)/Ti-6Al-4V composite e...
Contibutors: Maleki, Erfan (author) / Abolghassem, Zabihollah (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (690 kB)
1. TXT document (43 kB)
Surface properties of a laser-treated biopolymer
Contibutors: Michaljaničova, Iva (author) / Slepička, Petr (author) / Rimpelova, Silvie (author) / Sajdl, Petr (author) / Švorčík, Václav (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (500 kB)
1. TXT document (22 kB)
Measuring the viscoelastic properties of tissue using changes in its capacitance
Contibutors: Pavšelj, Nataša (author) / Cuznar, Primož (author) / Veselovskyi, Stanislav (author) / Miklavčič, Damijan (author) / Hart, Francis X. (author)
Source: Elektrotehniški vestnik
Numbering: 2016, volume 83, issue 3
Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (715 kB)
1. TXT document (44 kB)
Rheological properties of alumina ceramic slurries for ceramic shell-mould fabrication
Contibutors: Szymańska, Joanna (author) / Wiśniewski, Paweł (author) / Małek, Marcín (author) / Mizera, Jarosław (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (333 kB)
1. TXT document (17 kB)
Investigation of the mechanical properties of a cork/rubber composite
Contibutors: Kottner, Radek (author) / Kocáb, Jiří (author) / Heczko, Jan (author) / Krystek, Jan (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1460 kB)
1. TXT document (14 kB)
Surface treatment of heat-treated cast magnesium and aluminium alloys obdelava
Contibutors: Tański, Tomasz (author) / Wiśniowski, Maciej (author) / Matysiak, Wiktor (author) / Staszuk, Marcin (author) / Szklarek, Radoslav (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (7745 kB)
1. TXT document (32 kB)
Use of the ABI technique to measure the mechanical properties of aluminium alloys
Contibutors: Trudonoshyn, Oleksandr (author) / Puchnin, Maxim (author) / Prach, Olena (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1116 kB)
1. TXT document (20 kB)
The effect of EO and steam sterilization on the mechanical and electrochemical properties of tita...
Contibutors: Basiaga, Marcin (author) / Walke, Witold (author) / Paszenda, Zbigniew (author) / Kajzer, Anita (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (820 kB)
1. TXT document (26 kB)
Effect of mechanical activation on the synthesis of a magnesium aluminate spinel
Contibutors: Kirsever, Derya (author) / Nilgün Kaya, Karabulut (author) / Canikoglu, Nuray (author) / ÖzkanToplan, Hüseyin (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1394 kB)
1. TXT document (13 kB)
Antibacterial properties of non-thermal, atmospheric, Openair(R), plasma jet in surface decontami...
Contibutors: Dobeic, Martin (author) / Grebenc, Stanka (author) / Bajc, Zlatka (author) / Umek, Polona (author) / Pintarič, Štefan (author) / Uranjek, Irena (author) / Šinigoj-Gačnik, Ksenija (author)
Source: Slovenian veterinary research
Numbering: 2016, volume 53, issue 1
Provider: Univerza v Ljubljani, Veterinarska fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (903 kB)
1. TXT document (46 kB)
Influence of solidification speed on the structure and magnetic properties of Ndsub10Fesub81Zrsub...
Contibutors: Dośpial, Marcin (author) / Nabiałek, Marcin (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (633 kB)
1. TXT document (22 kB)
Thermodynamic properties and microstructures of different shape-memory alloys
Contibutors: Gomidželović, Lidija (author) / Požega, Emina (author) / Kostov, Ana (author) / Živković, Dragana (author) / Manasijević, Dragan (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2554 kB)
1. TXT document (28 kB)
Rheological properties of marine sediments from the Port of Koper
Contibutors: Smolar, Jasna (author) / Maček, Matej (author) / Petkovšek, Ana (author)
Source: Acta geotechnica Slovenica
Numbering: 2016, volume 13, issue 2
Provider: Univerza v Mariboru, Fakulteta za gradbeništvo
(Obvezni izvod spletne publikacije)
1. PDF document (271 kB)
1. TXT document (26 kB)
Assessment of mechanical and wear properties of epoxy-based hybrid composites
Contibutors: Agunsoye, J. O. (author) / Bello, S. A. (author) / Bello, L. (author) / Idehenre, M. M. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1267 kB)
1. TXT document (26 kB)
Investigation of Portevin-Le Chatelier effect of hot-rolled Fe-13Mn-0.2C-1Al-1Si TWIP steel
Contibutors: Aydemir, Bulent (author) / Zeytin, Havva Kazdal (author) / Guven, Gokhan (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2544 kB)
1. TXT document (23 kB)
FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...
Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1870 kB)
1. TXT document (37 kB)
Investigation of the mechanical properties of electrochemically deposited Au-In alloy films using...
Contibutors: Cherneva, Sabina (author) / Iankov, Roumen (author) / Georgiev, Martin (author) / Dobrovolska, Tsvetina (author) / Stoychev, Dimitar (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1732 kB)
1. TXT document (19 kB)
Analyzing the heat-treatment effect on the mechanical properties of free-cutting steels
Contibutors: Kulekci, Mustafa Kemal (author) / Esme, Ugur (author) / Kahraman, Funda (author) / Ozgun, Rahim (author) / Akkurt, Adnan (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1126 kB)
1. TXT document (20 kB)
Fabrication and properties of SiC reinforced copper-matrix-composite contact
Contibutors: Çelebi Efe, Gözde (author) / Ipek, Mediha (author) / Zeytin, Sakin (author) / Bindal, Cuma (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2470 kB)
1. TXT document (20 kB)
Use of the ABI technique to measure the mechanical properties of aluminium alloys
Contibutors: Puchnin, Maxim (author) / Trudonoshyn, Oleksandr (author) / Prach, Olena (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1289 kB)
1. TXT document (27 kB)
Microstructure and properties of the high-temperature (HAZ) of thermo-mechanically treated S700MC...
Contibutors: Górka, Jacek (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3973 kB)
1. TXT document (19 kB)
Effect of a combination of fly ash and shrinkage-reducing additives on the properties of alkali-a...
Contibutors: Bílek, Vlastimil (author) / Kalina, Lukáš (author) / Koplík, Jan (author) / Mončeková, Miroslava (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (486 kB)
1. TXT document (22 kB)
Ocena primernosti bukove žagovine kot ojačitvene komponente pri pripravi termoplastičnih biokompo...
Contibutors: Zule, Janja (author) / Bolka, Silvester (author) / Slapnik, Janez (author)
Source: Acta silvae et ligni
Numbering: 2016, issue 110
Provider: Gozdarski inštitut Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (627 kB)
1. TXT document (34 kB)
Influence of nano-sized cobalt oxide additions on the structural and electrical properties of nic...
Contibutors: Hardal, Gökhan (author) / Yüksel Price, Berat (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1213 kB)
1. TXT document (24 kB)
Effect of the addition of niobium and aluminium on the microstructures and mechanical properties ...
Contibutors: Gündüz, Süleyman (author) / Erden, Mehmet Akif (author) / Karabulut, Hasan (author) / Turkmen, Mustafa (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2075 kB)
1. TXT document (43 kB)
Compressive properties of auxetic structures produced with direct 3D printing
Contibutors: Koudelka, Petr (author) / Jiroušek, Ondřej (author) / Fíla, Tomáš (author) / Doktor, Tomáš (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1289 kB)
1. TXT document (33 kB)
Surface and anticorrosion properties of hydrophobic and hydrophilic TiOsub2 coatings on a stainle...
Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (629 kB)
1. TXT document (22 kB)
Magnetic properties and microstructure of a bulk amorphous Fe61Co10Ti3Y6B20 alloy, fabricated as ...
Contibutors: Nabiałek, Marcin (author) / Bloch, Katarzyna (author) / Szlązak, Karol (author) / Szota, Michał (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1087 kB)
1. TXT document (23 kB)
Mazalne lastnosti ionskih tekočin za hidravlične sisteme
Contibutors: Kambič, Milan (author) / Kalb, Roland (author) / Lovrec, Darko (author)
Source: Ventil (Ljubljana)
Numbering: 2016, volume 22, issue 1
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (6090 kB)
1. TXT document (25 kB)
Psihometrične značilnosti De Morton indeksa premičnosti za ocenjevanje premičnosti starostnikov
Contibutors: Zupanc, Aleksander (author) / Puh, Urška (author)
Source: Rehabilitacija (Ljubljana)
Numbering: 2016, volume 15, issue 3
Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)
1. PDF document (608 kB)
1. TXT document (43 kB)
Ocenjevanje funkcioniranja oseb z bolečino v rami
Contibutors: Lonzarić, Dragan (author) / Bojnec, Vida (author) / Jesenšek Papež, Breda (author)
Source: Rehabilitacija (Ljubljana)
Numbering: 2016, volume 15, supl. 1
Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)
1. PDF document (457 kB)
1. TXT document (51 kB)
Ocenjevanje funkcioniranja oseb z multiplo sklerozo v različnih fazah bolezni
Contibutors: Zupanc, Zdenka (author) / Udovčić Pertot, Anja (author) / Rotar, Eli (author) / Drljepan, Mateja (author) / Kragelj, Veronika (author)
Source: Rehabilitacija (Ljubljana)
Numbering: 2016, volume 15, supl. 1
Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)
1. PDF document (413 kB)
1. TXT document (29 kB)
Psihometrične lastnosti ocenjevalnih instrumentov
Contibutors: Vidmar, Gaj (author) / Jakovljević, Miroljub (author)
Source: Rehabilitacija (Ljubljana)
Numbering: 2016, volume 15, supl. 1
Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)
1. PDF document (657 kB)
1. TXT document (74 kB)
Influence of some structural properties of incontinence diapers on their functionality
Contibutors: Šajn Gorjanc, Dunja (author) / Bernjak, Žanin (author) / Černe Hočevar, Lidija (author)
Source: Tekstilec
Numbering: 2016, volume 59, issue 4
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (442 kB)
1. TXT document (47 kB)
Application of stimuli responsive microgel for creation of smart cotton fabric with antibacterial...
Contibutors: Štular, Danaja (author) / Simončič, Barbara (author) / Jerman, Ivan (author) / Tomšič, Brigita (author)
Source: Tekstilec
Numbering: 2016, volume 59, issue 2
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (339 kB)
1. TXT document (25 kB)
Chemical functionalisation of cotton fabric to impart multifunctional properties
Contibutors: Abidi, Noureddine (author) / Kiekens, Paul (author)
Source: Tekstilec
Numbering: 2016, volume 59, issue 2
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (317 kB)
1. TXT document (19 kB)
Thermal-mechanical sensory properties of hot-air welded textile transmission lines
Contibutors: Jevšnik, Simona (author) / Yi, Li (author) / Hu, Junyan (author) / Xiao, Han (author) / Xinxing, Wu (author) / Primentas, Anthony (author)
Source: Tekstilec
Numbering: 2016, volume 59, issue 2
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (236 kB)
1. TXT document (18 kB)
Fracture properties of titanium bone implants corroded by simulated body fluid
Contibutors: Marčič, Simon (author) / Praunseis, Anja (author)
Source: JET on-line
Journal of energy technology
Numbering: 2016, volume 9, iss. 2
Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)
1. PDF document (1673 kB)
1. TXT document (16 kB)
Modelling and analysis of the mechanical properties of agave sisalana variegata fibre / vinyl est...
Contibutors: Athijayamani, Ayyanar (author) / Ganesamoorthy, Raju (author) / Loganathan, Konda Thulasiraman (author) / Sidhardhan, Susaiyappan (author)
Source: Strojniški vestnik
Numbering: 2016, volume 62, nr. 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (803 kB)
1. TXT document (34 kB)
Manufacturing and properties of a magnesium interpenetrating phase composite
Contibutors: Steinacher, Matej (author) / Žužek, Borut (author) / Jenko, Darja (author) / Mrvar, Primož (author) / Zupanič, Franc (author)
Source: Strojniški vestnik
Numbering: 2016, volume 62, nr. 2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (5117 kB)
1. TXT document (21 kB)
Experimental and computational study of the thermodynamic properties of trivalent cobalt Schiff b...
Contibutors: Esmaielzadeh, Sheida (author) / Azimian, Leila (author) / Zare, Zohreh (author)
Source: Acta chimica slovenica
Numbering: 2016, volume 63, issue 2
Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (273 kB)
1. TXT document (45 kB)
New iridium complex coordinated with tetrathiafulvalene substituted triazole-pyridine ligand: syn...
Contibutors: Niu, Zhi-Gang (author)
Source: Acta chimica slovenica
Numbering: 2016, volume 63, issue 2
Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (243 kB)
1. TXT document (16 kB)
Effect of ZnO on the thermal degradation behavior of poly(methyl methacrylate) nanocomposites
Contibutors: Japić, Dajana (author) / Marinšek, Marjan (author) / Crnjak Orel, Zorica (author)
Source: Acta chimica slovenica
Numbering: 2016, volume 63, issue 3
Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (332 kB)
1. TXT document (34 kB)
Properties and Structure of the LiCl-films on Lithium Anodes in Liquid Cathodes
Contibutors: Mogensen, Mogens (author) / Henneso, Erik (author)
Source: Acta chimica slovenica
Numbering: 2016, volume 63, issue 3
Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (374 kB)
1. TXT document (65 kB)
Razvrstitev funkcijske premičnosti
Contibutors: Puh, Urška (author) / Behrić, Edita (author) / Zatler, Sabina (author) / Rudolf, Marko (author) / Kržišnik, Maruša (author)
Source: Fizioterapija (Ljubljana)
Numbering: 2016, volume 24, issue 2
Provider: Združenje fizioterapevtov Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (1500 kB)
1. TXT document (47 kB)
Content validity and internal reliability of Slovene version of Medication Administration Error S...
Contibutors: Vrbnjak, Dominika (author) / Pahor, Dušica (author) / Štiglic, Gregor (author) / Pajnkihar, Majda (author)
Source: Obzornik zdravstvene nege
Numbering: 2016, volume 50, issue 1
Provider: Zbornica zdravstvene in babiške nege Slovenije - Zveza strokovnih društev medicinskih sester, babic in zdravstvenih tehnikov Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (310 kB)
1. TXT document (86 kB)
Spherical folding tessellations by kites and isosceles triangles IV
Contibutors: Avelino, Catarina P. (author) / Santos, Altino F. (author)
Source: Ars mathematica contemporanea
Numbering: 2016, volume 11, issue 1
Provider: Univerza na Primorskem, Fakulteta za naravoslovje, matematiko in informacijske tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (821 kB)
1. TXT document (28 kB)
Alternativni pomlajevalec kot dodatek za povečanje deleža recikliranega asfalta v asfaltni mešanici
Contibutors: Avsenik, Lidija (author) / Tušar, Marjan (mentor) / Mikoš, Matjaž (member of the commission for defense) / Slemenik Perše, Lidija (member of the commission for defense) / Jagličić, Zvonko (member of the commission for defense) / Žura, Marijan (member of the commission for defense) / Novič, Marjana (member of the commission for defense) / Bokan-Bosiljkov, Violeta (comentor)
Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo
1. PDF document (5381 kB)
1. TXT document (277 kB)
Dostop v Repozitoriju Univerze
Physicochemical properties and antioxidant activities of five Iranian pomegranate cultivars (Puni...
Contibutors: Nikdel, Kosar (author) / Seifi, Esmaiel (author) / Babaie, Hamed (author) / Sharifani, Mehdi (author) / Hemmati, Khodayar (author)
Source: Acta agriculturae Slovenica
Numbering: 2016, volume 107, issue 2
Provider: Univerza v Ljubljani, Biotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (157 kB)
1. TXT document (33 kB)
Vpliv deleža silicija na mikrostrukturo in mehanske lastnosti mednih livnih zlitin brez svinca
Contibutors: Turen, Yunus (author) / Yildirim, M. Mursel (author) / Ahlatci, Hayrettin (author) / Zengin, Huseyin (author) / Ünal, Mehmet (author) / Sun, Yavuz (author) / Acarer, Mustafa (author)
Source: Livarski vestnik
Numbering: 2016, volume 63, issue 4
Provider: Društvo livarjev Slovenije
1. PDF document (438 kB)
1. TXT document (20 kB)
Inovativni pristop k izboljšanju disperzije kovinskega oksida in strukturno odvisnih lastnosti el...
Contibutors: Talijan, Nadežda (author) / Ćosović, Vladan (author) / Ćosović, Aleksandar R. (author) / Živković, Dragana (author)
Source: Livarski vestnik
Numbering: 2016, volume 63, issue 3
Provider: Društvo livarjev Slovenije
1. PDF document (1332 kB)
1. TXT document (30 kB)
Vpliv dodatka Zr na lastnosti Al zlitin
Contibutors: Medved, Jože (author) / Kores, Stanislav (author) / Mrvar, Primož (author) / Križman, Alojz (author) / Vončina, Maja (author)
Source: Livarski vestnik
Numbering: 2016, volume 63, issue 1
Provider: Društvo livarjev Slovenije
1. PDF document (541 kB)
1. TXT document (18 kB)
Akustične lastnosti timpanov in njihova povezava z inštrumentalno prakso
Contibutors: Poljanec, Andraž (author)
Source: Muzikološki zbornik
Numbering: 2016, volume 52, issue 1
Provider: Univerza v Ljubljani, Filozofska fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (1795 kB)
1. TXT document (42 kB)
ogled v listalniku
Electrical, optical and structural properties of molybdenum based nanostructures and their polymer composites
Contibutors: Varlec, Ana (author) / Remškar, Maja (mentor)
Provider: Univerza v Ljubljani, Fakulteta za matematiko in fiziko
(Obvezni izvod spletne publikacije)
Publication is available at terminals on the library premises
Uporaba hemiceluloz za funkcionalizacijo površin sintetičnih polimerov
Contibutors: Dimitrušev, Nena (author) / Strnad, Simona (mentor) / Fras Zemljič, Lidija (comentor) / Saake, Bodo (comentor)
Provider: Univerza v Mariboru, Fakulteta za strojništvo
Publication is available at terminals on the library premises
Statistično modeliranje vsebnosti izbranih kovin v vrtninah glede na lastnosti tal na območju Celja
Contibutors: Zupan, Marko (author) / Grčman, Helena (mentor) / Košmelj, Katarina (comentor)
Provider: Univerza v Ljubljani, Biotehniška fakulteta
Publication is available at terminals on the library premises
Vpliv prahu na spektralne in funkcionalne lastnosti listov navadne bukve (Fagus sylvatica L.)
Contibutors: Zajec, Luka (author) / Gaberščik, Alenka (mentor)
Provider: Univerza v Ljubljani, Biotehniška fakulteta
Publication is available at terminals on the library premises
Farmakokinetične lastnosti in klinična učinkovitost rituksimaba pri bolnikih z difuznim velikoceličnim limfomom B
Contibutors: Rožman, Samo (author) / Grabnar, Iztok (mentor) / Jezeršek Novaković, Barbara (comentor)
Provider: Univerza v Ljubljani, Fakulteta za farmacijo
(Obvezni izvod spletne publikacije)
Publication is available at terminals on the library premises
Endokrine in genotoksične lastnosti sestavin kozmetičnih izdelkov iz podatkovne baze Coslng z in silico metodami in luciferaznimi reporterskimi testi
Contibutors: Plošnik, Alja (author) / Vračko, Marjan (mentor) / Sollner Dolenc, Marija (comentor)
Provider: Univerza v Ljubljani, Fakulteta za farmacijo
(Obvezni izvod spletne publikacije)
Publication is available at terminals on the library premises
Vpliv staranja na mehanske lastnosti smolno vezanih brusov s korundnimi in SiC zrni
Contibutors: Matavž, Albin (author) / Gubeljak, Nenad (author) / Goričanec, Darko (mentor) / Krope, Jurij (comentor)
Provider: Univerza v Mariboru, Fakulteta za kemijo in kemijsko tehnologijo
Publication is available at terminals on the library premises
Oblikovanje večfunkcionalnih zaščitnih lastnosti tekstilij s plazmo in tehnologijo sol-gel
Contibutors: Vasiljević, Jelena (author) / Simončič, Barbara (mentor)
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
Publication is available at terminals on the library premises
Prepoznavanje lastnosti in trajnostno upravljanje s sedimenti iz vodnih okolij
Contibutors: Smolar, Jasna (author) / Petkovšek, Ana (mentor) / Mikoš, Matjaž (member of the commission for defense) / Logar, Janko (member of the commission for defense) / Žagar, Dušan (member of the commission for defense) / Mladenovič, Ana (member of the commission for defense)
Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo
Publication is available at terminals on the library premises
Realization, property and rights 2026 Narodna in univerzitetna knjižnica, Turjaška 1, 1000 Ljubljana