dLib.si - search results

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

Effect of severe plastic and heavy cold deformation on the structural and mechanical properties o...

Contibutors: Palán, Jan (author) / Šutta, P. (author) / Kubina, Tomáš (author) / Dománková, Mária (author)

1. PDF document (1140 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Laboratory accreditation - confidence in the activities of conformity assessment of products

Contibutors: Klobodanović, Azemina (author) / Oruč, Mirsada (author)

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (434 kB)

Determination of the deformational energy during slab-width rolling on an edger mill

Contibutors: Vode, Franci (author) / Jaklič, Anton (author) / Robič, Roman (author) / Košir, Anton (author) / Perko, Franci (author) / Novak, Jani (author)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (577 kB)

Mathematical models for evaluating the influence of degradation on the tensile and flexural prope...

Contibutors: Oladele, Isiaka Oluwole (author) / Adesoji Adediran, Adeolu (author) / Akinwekomi, Akeem Damilola (author) / Adara, Peace Pamilerin (author)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

Raztezanje talin polimerov (1995, volume 29, issue 1/2)

Contibutors: Žerjal, Breda (author)

Evaluation of the thermal resistance of selected bentonite binders

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (277 kB)

1. TXT document (8 kB)

Contibutors: Beňo, Jaroslav (author) / Vontorová, Jiřina (author) / Matějka, Vlastimil (author) / Gál, Karel (author)

Monitoring the effect of quartz-sand replacement by amorphous-silica raw material on the microstr...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

1. TXT document (21 kB)

Contibutors: Hušt`avová, Jana (author) / Černý, Vít (author) / Drochytka, Rostislav (author)

1. PDF document (1385 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Estimation of the fatigue threshold values for a crack propagating through a bi-material interfac...

Contibutors: Náhlík, Lubos (author)

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

Metalografska preiskava in korozijska odpornost zvarov feritnega nerjavnega jekla

Contibutors: Torkar, Matjaž (author) / Kocijan, Aleksandra (author) / Celin, Roman (author) / Burja, Jaka (author) / Podgornik, Bojan (author)

1. PDF document (3359 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Transport električnega naboja v organskih polprevodnikih, simulacija po metodi Monte Carlo

Contibutors: Pavlica, Egon (author) / Hudej, Robert (author) / Bratina, Gvido (author)

Numbering: 2003, volume 37, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (183 kB)

Comparison of the surface and anticorrosion properties of SiOsub2 and TiOsub2 nanoparticle epoxy ...

Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (541 kB)

Načini preprečevanja raztapljanja neravnotežnih trdnih faz v večfaznih mešanicah s talino

Contibutors: Lojen, Gorazd (author) / Anžel, Ivan (author) / Križman, Alojz (author)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (503 kB)

Vpliv pakiranja zgorevalne zmesi na potek sinteze pri citratno nitratnem postopku

Contibutors: Zupan, Klementina (author) / Kolar, Drago (author) / Kramberger, Albina (author)

1. PDF document (1468 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Use of numerical simulation in the production of porous-metal castings

Contibutors: Radkovský, Filip (author) / Merta, Václav (author)

1. PDF document (1037 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Oxidation of molybdenum by low-energy oxygen-ion bombardment

Contibutors: Jelovica Badovinac, Ivana (author) / Kavre, Ivna (author) / Šarić, Iva (author) / Peter, Robert (author) / Petravić, Mladen (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (697 kB)

Increasing the wear resistance of Al-Mg components using thermal-spray coatings

Contibutors: Lukauskaitë, Raimonda (author) / Černašejus, Olegas (author) / Škamat, Jelena (author) / Asadauskas, Svajus (author) / Ručinskienë, Alma (author) / Kalpokaitë-Dičkuvienë, Regina (author) / Višniakov, Nikolaj (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

Modification of non-metallic inclusions with rare-earth metals in 50CrMoV13-1 steel

Contibutors: Šuler, Blaž (author) / Burja, Jaka (author) / Medved, Jože (author)

1. PDF document (1783 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

An evaluation of the properties of rotor forgings made from 26NiCrMoV115 steel

Contibutors: Balcar, Martin (author) / Turecký, Václav (author) / Sochor, Libor (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Bažan, Jiří (author) / Němeček, Stanislav (author) / Kešner, Dušan (author)

Fatigue properties of sintered DIN SINT-D30 powder metal before and after heat treatment

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (474 kB)

1. TXT document (18 kB)

Contibutors: Šori, Marko (author) / Šuštaršič, Borivoj (author) / Glodež, Srečko (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

Materiali in nosilnost velikih kotalnih ležajev

Contibutors: Kunc, Robert (author) / Prebil, Ivan (author) / Torkar, Matjaž (author)

1. PDF document (1277 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Materiali in tehnologije (2015, volume 49, issue 5)

Simulation of latent-heat thermal storage integrated with room structures

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (42 MB)

1. TXT document (706 kB)

Contibutors: Charvat, Pavel (author) / Mauder, Tomas (author) / Ostry, Milan (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (466 kB)

A crack growth analysis in critical structural components

Contibutors: Semenski, Damir (author) / Božić, Željko (author) / Wolf, Hinko (author)

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (300 kB)

Effect of the by-pass cement-kiln dust and fluidized-bed-combustion fly ash on the properties of ...

Contibutors: Bílek, Vlastimil (author) / Pařízek, Ladislav (author) / Kalina, Lukáš (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (65 kB)

Študij notranje oksidacije v naogljičenih hitrostrjenih trakovih Cu

Contibutors: Rudolf, Rebeka (author) / Kosec, Ladislav (author) / Anžel, Ivan (author) / Gusel, Leo (author) / Poharc, Mojmir (author)

Numbering: 2007, volume 41, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (548 kB)

Materiali in tehnologije (2008, volume 42, issue 1)

Fatigue problems of transmission belts:

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (18 MB)

1. TXT document (142 kB)

Contibutors: Emri, Igor (author) / Kramar, Janez (author) / Nikonov, Anatolij (author) / Florjančič, Urška (author) / Hribar, Anton (author)

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (512 kB)

Lasersko reparaturno varjenje termo razpok na orodjih za tlačno litje aluminija

Contibutors: Pleterski, Matej (author) / Tušek, Janez (author) / Kosec, Ladislav (author) / Klobčar, Damjan (author) / Muhič, Mitja (author) / Muhič, Tadej (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (940 kB)

Determination of the chemical composition and heterogeneity range of highly dense PLZT ceramics b...

Contibutors: Samardžija, Zoran (author) / Marinenko, Ryna B. (author) / Bernik, Slavko (author) / Kosec, Marija (author) / Čeh, Miran (author)

Assessing the stress fields in an injection-moulded undercut geometry during ejection supported b...

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (258 kB)

1. TXT document (18 kB)

Contibutors: Florjanič, Blaž (author) / Božič, Uroš (author) / Zafošnik, Boštjan (author)

Recikliranje gnetnih aluminijevih zlitin v tovarni Impol d.d.

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (265 kB)

1. TXT document (26 kB)

Contibutors: Čokl, Jernej (author) / Šafhalter, Rajko (author) / Brodnjak, Davorin (author) / Kevorkijan, Varužan (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (80 kB)

A failure criterion for single-crystal superalloys during thermocyclic loading

Contibutors: Getsov, Leonid (author) / Semenov, Artem (author) / Staroselsky, Alexander (author)

Numbering: 2008, volume 42, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (515 kB)

1. TXT document (35 kB)

Raziskave cevi uparjalnika

Contibutors: Vojvodič-Tuma, Jelena (author) / Korošec, Darko (author) / Gudek, K. (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

Korozijska obstojnost nekaterih nerjavnih jekel

Contibutors: Kos, Ivan (author) / Grešovnik, Ferdinand (author) / Grešovnik, Marija Magdalena (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (106 kB)

Mehanske lastnosti prepletenih polimernih mrež (1995, volume 29, issue 5/6)

Contibutors: Anžlovar, Alojz (author) / Anžur, Irena (author) / Malavašič, Tatjana (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (516 kB)

Generator mreže za modeliranje strjevanja teles zapletenih oblik z dvojno recipročno metodo robni... (1995, volume 29, issue 1/2)

Contibutors: Košir, Aleš (author) / Šarler, Božidar (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (577 kB)

Use of artificial neural networks in ball burnishing process for the prediction of surface roughn...

Contibutors: Esme, Ugur (author) / Sagbas, Aysun (author) / Kahraman, Funda (author) / Kulekci, Mustafa Kemal (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (237 kB)

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidi...

Contibutors: Yi, Xiaojie (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Xu, Yajun (author) / Mahamane Sani, Abdou Yahouza (author)

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Characteristics of SnO2 doped ZnO-Bi2O3 ceramics

Contibutors: Daneu, Nina (author) / Bernik, Slavko (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (894 kB)

Laser welding of the new grade of advanced high-strength steel Domex 960

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Lisiecki, Aleksander (author)

1. PDF document (4387 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate

Contibutors: Maretić, Mauro (author) / Smoljan, Božidar (author) / Iljkić, Dario (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (948 kB)

Synthesis of a Fe3O4/PAA-based magnetic fluid for faraday-rotation measurements

Contibutors: Kürçükdermenci, Serhat (author) / Kutluay, Deniz (author) / Avgin, Ibrahim (author)

1. PDF document (1345 kB)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint

Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (792 kB)

Corrosion resistance of CrAlVN coatings deposited on PCrNi3Mo steel surfaces with reactive magnet...

Contibutors: Jin, Hao (author) / Li, De-Yuan (author) / Sun, Hai-Jing (author) / Wang, Lei (author) / Guo, Ce-An (author) / Zhang, Gang (author)

1. PDF document (1215 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Development of microstructure of steel for thermal power generation

Contibutors: Kvackaj, Tibor (author) / Kuskulic, T. (author) / Fujda, M. (author) / Pokorny, I. (author) / Weiss, M. (author) / Bevilaqua, T. (author)

Numbering: 2007, volume 41, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

Possibilities of NUS and impact-echo methods for monitoring steel corrosion in concrete

Contibutors: Timčaková-Šamárková, Kristýna (author) / Matysík, Michal (author) / Chobola, Zdeněk (author)

1. PDF document (1342 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of carbon content on the corrosion of MgO-C refractory material caused by acid and ...

Contibutors: Adolf, Zdeněk (author) / Suchánek, Petr (author) / Husar, Ivo (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (124 kB)

Determination of phosphorus in steel using inductively coupled plasma atomic emission spectrometry

Contibutors: Drglin, Tatjana (author)

Numbering: 2005, volume 39, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (135 kB)

Zaviralni sistem v indukcijskem števcu

Contibutors: Chvatal, Damijan (author)

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

Identification of the material parameters of a unidirectional fiber composite using a micromodel

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

Simulacijski model ogrevanja gredic v peči Allino

Contibutors: Jaklič, Anton (author) / Kolenko, Tomaž (author) / Glogovac, Branislav (author) / Keček, Branislav (author) / Jamer, Jure (author)

Numbering: 2004, volume 38, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (285 kB)

Influence of structural defects on the magnetic properties of massive amorphous Fesub60Cosub10Mos...

Contibutors: Gondro, Joanna (author) / Bloch, Katarzyna (author) / Nabiałek, Marcin (author) / Garus, Sebastian (author)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (576 kB)

Tribološke lastnosti jekla nitriranega v plazmi in prekritega z DLC-prevleko

Contibutors: Podgornik, Bojan (author) / Vižintin, Jožef (author) / Leskovšek, Vojteh (author) / Ronkainen, Helena (author) / Holmberg, Kenneth (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (271 kB)

Razpad alfa-AlB12 v zlitinah Al-B in Al-Ti-B

Contibutors: Zupanič, Franc (author) / Spaić, Savo (author) / Križman, Alojz (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (192 kB)

The phenomenon of reduced plasticity in low-alloyed copper

Contibutors: Ozgowicz, Wojciech (author) / Kalinowska-Ozgowicz, Elżbieta (author) / Grzegorczyk, Barbara (author) / Lenik, Klaudiusz (author)

1. PDF document (5127 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Structural characterization of platinum foil for neural stimulating electrodes using a four-point...

Contibutors: Pečlin, Polona (author) / Bizjak, Milan (author) / Pribošek, Marko (author) / Godec, Matjaž (author) / Ribarič, Samo (author) / Rozman, Janez (author)

Effect of copper element on hot behaviour of 304L stainless steel

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (634 kB)

1. TXT document (35 kB)

Contibutors: Li, Juan (author) / Zhao, Guanghui (author) / Ma, Lifeng (author) / Chen, Huiqin (author) / Li, Huaying (author) / Zhang, Wei (author)

1. PDF document (3505 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Research on the quality of the welded joint of aluminium alloy sheet AA6082-T6 using FSW, MIG and...

Contibutors: Šibalić, Nikola (author) / Vukčević, Milan M. (author)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (979 kB)

Reološke lastnosti parafinskih suspenzij aluminijevega oksida

Contibutors: Veskovič-Bukudur, Stojana (author) / Novak, Saša (author)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (292 kB)

Influence of the tool rotational speed on the microstructure and joint strength of friction-stir ...

Contibutors: Dinaharan, Isaac (author) / Akinlabi, Esther T. (author)

1. PDF document (3469 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Določitev kalcijevih kromatov Ca5(CrO4)3O0,5, Ca3(CrO4)2 in Ca5(CrO4)3 z rentgensko difrakcijo, o... (1995, volume 29, issue 1/2)

Contibutors: Dobnikar, Meta (author) / Mirtič, Breda (author)

Effect of stop-hole-induced material removal on the fatigue properties of cracked DT4C steel

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (418 kB)

1. TXT document (9 kB)

Contibutors: Zhang, Chunguo (author) / Liu, Rongwei (author) / Liu, Qiankun (author) / Ren, Cuiping (author)

1. PDF document (2330 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Uvajanje hitroreznih jekel, izdelanih po postopkih metalurgije prahov (PM/HIP), v proizvodni prog...

Contibutors: Večko Pirtovšek, Tatjana (author) / Urnaut, Borut (author) / Grešovnik, Ferdinand (author)

Numbering: 2002, volume 36, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (281 kB)

Application of laserspeckleinterferometry to fracture mechanical investigations of bonds and non ...

Contibutors: Junghans, Eva (author) / Dobi, Djordje (author)

1. PDF document (1205 kB)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (27 kB)

Površinska obdelava orodij za hladno oblikovanje

Contibutors: Legat, Franc (author)

Physicochemical properties of a Ti67 alloy after EO and steam sterilization

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (20 kB)

1. TXT document (7 kB)

Contibutors: Walke, Witold (author) / Basiaga, Marcin (author) / Paszenda, Zbigniew (author) / Marciniak, Jan (author) / Karasinski, Paweł (author)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (938 kB)

Mechanical properties of a novel joint of a single-layer aluminum-alloy combined lattice-shell st...

Contibutors: Zhao, Caiqi (author) / Ma, Jun (author) / Du, Shengchen (author) / Gu, Ye (author) / Zhou, Yunwen (author)

1. PDF document (1819 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

The electrochemical study of duplex stainless steel in chloride solutions

Contibutors: Kocijan, Aleksandra (author) / Donik, Črtomir (author) / Jenko, Monika (author)

Numbering: 2009, volume 43, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (141 kB)

Ocena sanacije proizvodnih družb slovenskih železarn v obdobju 1993-1997

Contibutors: Vodopivec, Franc (author)

The effect of current types on the microstructure and corrosion properties of Ni/nanoAlsub2Osub3 ...

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (84 kB)

1. TXT document (28 kB)

Contibutors: Kucharska, Beata (author) / Krawczynska, Agnieszka (author) / Rożniatowski, Krzysztof (author) / Zdunek, Joanna (author) / Poplawski, Karol (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (5584 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

The wet-chemical synthesis of functionalized Znsub{1-x}OMnsubx quantum dots utilizable in optical...

Contibutors: Alizadeh, Mohamad (author) / Salimi, Reza (author) / Sameie, Hassan (author) / Sarabi, Ali Asghar (author) / Alvani, Ali Asghar Sabbagh (author) / Tahriri, Mohammad Reza (author)

The effects of micro and nano CaCo3 on the rheological and physico/mechanical behavior of an SBS/...

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (398 kB)

1. TXT document (13 kB)

Contibutors: Sadeghi, Mohsen (author) / Esfandiari, Amirhossein (author)

Sinteza in karakterizacija sulfoniranega polianilina

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (785 kB)

1. TXT document (35 kB)

Contibutors: Mav Golež, Ida (author) / Žigon, Majda (author) / Šebenik, Anton (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (94 kB)

A new topology for the trajectories of the meniscus during continuous steel casting

Contibutors: Risteski, Ice B. (author)

Chromite spinel formation in steelmaking slags

Numbering: 2007, volume 41, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

1. TXT document (57 kB)

Contibutors: Burja, Jaka (author) / Tehovnik, Franc (author) / Medved, Jože (author) / Godec, Matjaž (author) / Knap, Matjaž (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (616 kB)

Effect of holding time on the production of Nb-NbAl3 intermetallic composites via electric-curren...

Contibutors: Aybey, Muhammed (author) / Yener, Tuba (author) / Ipek, Mediha (author) / Zeytin, Sakin (author)

1. PDF document (1282 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Gelling polysaccharide as the electrolyte matrix in a dye-sensitized solar cell

Contibutors: Bantang, Jose Paolo (author) / Camacho, Drexel (author)

The influence of carbon materials on the properties of MgO refractories

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (890 kB)

1. TXT document (71 kB)

Contibutors: Kuffa, Tarzícius (author) / Sučik, Gabriel (author) / Hršak, Damir (author)

Formation of Ni-Ti intermetallics during reactive sintering at 800-900 °C

Numbering: 2005, volume 39, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (155 kB)

1. TXT document (13 kB)

Contibutors: Novák, Pavel (author) / Vladimír, Vojtěch (author) / Průša, Filip (author) / Pokorný, Petr (author) / Salvetr, Pavel (author) / Knaislová, Anna (author) / Nová, Kateřina (author)

1. PDF document (1498 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Materiali in tehnologije (2008, volume 42, issue 5)

Effects of subzero treatments on the mechanical properties of the SAE 4140 steel

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (10 MB)

1. TXT document (154 kB)

Contibutors: Sahin, Ismail (author) / Höke, Gürhan (author) / Cinici, Hanifi (author) / Findik, Tayfun (author) / Koralay, Haluk (author) / Arabaci, Ugur (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

Effects of extrusion shear on the microstructures and a fracture analysis of a magnesium alloy in...

Contibutors: Hu, Hongjun (author) / Sun, Zhao (author) / Zhang, Dingfei (author)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (988 kB)

Določevanje Hugginsovega interakcijskega parametra pri nabrekanju elastomerov s pomočjo teorije g... (1995, volume 29, issue 1/2)

Contibutors: Šuštar, Marija (author) / Šušterič, Zoran (author) / Čadež, Lidija (author) / Kezele, Marija (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (448 kB)

Influence of the process parameters on high-velocity oxygen-fuel-sprayed 75Cr3C2-25NiCr coatings

Contibutors: Nagulan, BalaGanesh (author) / Thamilkolundu, SenthilKumar (author) / Murugesan, Chandrasekar (author)

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Numerical and experimental analyses of the delamination of cross-ply laminates

Contibutors: Zemčík, Robert (author) / Laš, Vladislav (author)

Numbering: 2008, volume 42, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (158 kB)

Effect of the aggregate type on the properties of alkali-activated slag subjected to high tempera...

Contibutors: Rovnaník, Pavel (author) / Dufka, Ámos (author)

1. PDF document (1134 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the carbide-particle spheroidisation process on the microstructure after the quenchi...

Contibutors: Dlouhý, Jaromír (author) / Hauserova, Daniela (author) / Nový, Zbyšek (author)

1. PDF document (1464 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Študij sekundarnih interakcij v polarnih kavčukih z mehaničnimi sredstvi: primer mešanic CR/TPU

Contibutors: Dimitrievski, Ilija (author) / Šušterič, Zoran (author)

1. PDF document (1504 kB)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (21 kB)

Uporaba kisikove sonde pri kontroli in vodenju procesa izdelave jekla

Contibutors: Koroušić, Blaženko (author) / Godicelj, Tomaž (author) / Rozman, Alojz (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (102 kB)

Polymer-matrix-bonded polyester fibers as a substitute for materials used for the cores of vacuum...

Contibutors: Zach, Jiří (author) / Novák, Vítězslav (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (349 kB)

Effect of ZrOsub2 additions on fabrication of ZrOsub2/Mg composites via friction-stir processing

Contibutors: Chen, Hongmei (author) / Li, Xiaowen (author) / Liao, Si'en (author) / Zhang, Jing (author) / Jin, Yunxue (author) / Cui, Hongwei (author)

1. PDF document (1536 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Numerical simulation of the progressive damage to FRC panels due to shock loading

Contibutors: Zemčík, Robert (author) / Laš, Vladislav (author)

Numbering: 2005, volume 39, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

Isothermal oxidation behavior of electrospark deposited NiCrAlY coatings on a Ni-based single-cry...

Contibutors: Guo, Cean (author) / Liang, Ting (author) / Lu, Fengsheng (author) / Liang, Zhengang (author) / Zhao, Shuang (author) / Zhang, Jian (author)

1. PDF document (1642 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Sinteza magnetnih nanodelcev, funkcionaliziranih s tanko plastjo silike

Contibutors: Čampelj, Stanislav (author) / Makovec, Darko (author) / Bele, Marjan (author) / Drofenik, Mihael (author) / Jamnik, Janko (author)

Numbering: 2007, volume 41, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (733 kB)

Stability of close-cell Al foams depending on the usage of different foaming agents

Contibutors: Paulin, Irena (author)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (998 kB)

Vpliv kemijske sestave in toplotne obdelave na lastnosti feritnega nerjavnega jekla za magnetne v...

Contibutors: Grešovnik, Ferdinand (author)

Lastnosti različnih vrvi za sidranje jeklenih konstrukcij (1995, volume 29, issue 5/6)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (138 kB)

1. TXT document (18 kB)

Contibutors: Vojvodič-Tuma, Jelena (author)

1. PDF document (1081 kB)

Provider: Inštitut za kovinske materiale in tehnologije