dLib.si - search results

Načini preprečevanja raztapljanja neravnotežnih trdnih faz v večfaznih mešanicah s talino

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (277 kB)

1. TXT document (8 kB)

Contibutors: Lojen, Gorazd (author) / Anžel, Ivan (author) / Križman, Alojz (author)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (503 kB)

1. TXT document (25 kB)

Raziskave cevi uparjalnika

Contibutors: Vojvodič-Tuma, Jelena (author) / Korošec, Darko (author) / Gudek, K. (author)

Mehanske lastnosti prepletenih polimernih mrež (1995, volume 29, issue 5/6)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (146 kB)

1. TXT document (20 kB)

Contibutors: Anžlovar, Alojz (author) / Anžur, Irena (author) / Malavašič, Tatjana (author)

Generator mreže za modeliranje strjevanja teles zapletenih oblik z dvojno recipročno metodo robni... (1995, volume 29, issue 1/2)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (516 kB)

1. TXT document (11 kB)

Contibutors: Košir, Aleš (author) / Šarler, Božidar (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (577 kB)

Characteristics of SnO2 doped ZnO-Bi2O3 ceramics

Contibutors: Daneu, Nina (author) / Bernik, Slavko (author)

Razpad alfa-AlB12 v zlitinah Al-B in Al-Ti-B

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (894 kB)

1. TXT document (22 kB)

Contibutors: Zupanič, Franc (author) / Spaić, Savo (author) / Križman, Alojz (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (192 kB)

Določitev kalcijevih kromatov Ca5(CrO4)3O0,5, Ca3(CrO4)2 in Ca5(CrO4)3 z rentgensko difrakcijo, o... (1995, volume 29, issue 1/2)

Contibutors: Dobnikar, Meta (author) / Mirtič, Breda (author)

Application of laserspeckleinterferometry to fracture mechanical investigations of bonds and non ...

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (418 kB)

1. TXT document (9 kB)

Contibutors: Junghans, Eva (author) / Dobi, Djordje (author)

1. PDF document (1205 kB)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (27 kB)

Površinska obdelava orodij za hladno oblikovanje

Contibutors: Legat, Franc (author)

Ocena sanacije proizvodnih družb slovenskih železarn v obdobju 1993-1997

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (20 kB)

1. TXT document (7 kB)

Contibutors: Vodopivec, Franc (author)

Sinteza in karakterizacija sulfoniranega polianilina

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (84 kB)

1. TXT document (28 kB)

Contibutors: Mav Golež, Ida (author) / Žigon, Majda (author) / Šebenik, Anton (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (94 kB)

Določevanje Hugginsovega interakcijskega parametra pri nabrekanju elastomerov s pomočjo teorije g... (1995, volume 29, issue 1/2)

Contibutors: Šuštar, Marija (author) / Šušterič, Zoran (author) / Čadež, Lidija (author) / Kezele, Marija (author)

Študij sekundarnih interakcij v polarnih kavčukih z mehaničnimi sredstvi: primer mešanic CR/TPU

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (448 kB)

1. TXT document (14 kB)

Contibutors: Dimitrievski, Ilija (author) / Šušterič, Zoran (author)

1. PDF document (1504 kB)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (21 kB)

Uporaba kisikove sonde pri kontroli in vodenju procesa izdelave jekla

Contibutors: Koroušić, Blaženko (author) / Godicelj, Tomaž (author) / Rozman, Alojz (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (102 kB)

Lastnosti različnih vrvi za sidranje jeklenih konstrukcij (1995, volume 29, issue 5/6)

Contibutors: Vojvodič-Tuma, Jelena (author)

1. PDF document (1081 kB)

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (23 kB)

Decarburization mechanism of Fe-Si-Al alloy with antimony addition

Contibutors: Steiner Petrovič, Darja (author) / Jenko, Monika (author) / Gontarev, Vasilij (author) / Grabke, Hans Jürgen (author)

Energy and mass distributions of ions during depostition! of TiN by triode ion plating in BAI 730 M

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (106 kB)

1. TXT document (14 kB)

Contibutors: Maček, Marijan (author) / Navinšek, Boris (author) / Panjan, Peter (author) / Kadlec, Stanislav (author)

Mezomorfne lastnosti 4-{omega-bis(2-hidroksietil)amino-alkoksi}-4'-metoksiazobenzenov

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (139 kB)

1. TXT document (19 kB)

Contibutors: Brecl, Marko (author) / Žigon, Majda (author) / Malavašič, Tatjana (author)

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (340 kB)

Prepletene polimerne mreže za površinsko dodelavo usnja

Contibutors: Anžlovar, Alojz (author) / Anžur, Irena (author) / Malavašič, Tatjana (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (35 kB)

Crimped polypropilene yarns

Contibutors: Demšar, Andrej (author) / Sluga, Franci (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (76 kB)

Razvoj postopka iztiskavanja kompozitov Al/SiC

Contibutors: Šuštaršič, Borivoj (author) / Doberšek, Mirko (author) / Breskvar, Bojan (author) / Torkar, Matjaž (author) / Kevorkijan, Varužan (author) / Dai, Sudradjat (author) / Smolej, Anton (author) / Nardin, Vladimir (author)

Polimerne membrane za ločevanje krvi; kemijska modifikacija njihove površine

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (492 kB)

1. TXT document (41 kB)

Contibutors: Lahovnik, Vesna (author) / Kukovičič, Irena (author) / Stropnik, Črtomir (author)

1. PDF document (1223 kB)

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

Vpliv mase jekla in vrste sredstev za gašenje na mehanske lastnosti jekla

Contibutors: Grum, Janez (author) / Božič, Slavko (author) / Lavrič, Roman (author)

1. PDF document (2114 kB)

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (41 kB)

Popis različne stopnje hladne deformacije konstrukcijskega jekla na osnovi Barkhausnovega šuma

Contibutors: Grum, Janez (author) / Pečnik, Boštjan (author) / Fefer, Dušan (author) / Žerovnik, Pavle (author)

Correlations between fatigue and variations in material constants of PLZT ceramics

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (119 kB)

1. TXT document (19 kB)

Contibutors: Levstik, Adrijan (author) / Bobnar, Vid (author) / Kutnjak, Zdravko (author) / Kosec, Marija (author)

Characterization of hard protective coatings based on (Cr,Ta)N

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (77 kB)

1. TXT document (12 kB)

Contibutors: Čekada, Miha (author) / Panjan, Peter (author) / Navinšek, Boris (author) / Cvelbar, Franc (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (118 kB)

Surface segregation studies of selenium on FeSiAl alloy

Contibutors: Jenko, Monika (author) / Fine, Joseph (author) / Mandrino, Đorđe (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (123 kB)

Študij reakcij v večplastnih strukturah (1995, volume 29, issue 1/2)

Contibutors: Panjan, Peter (author) / Cvelbar, Andrej (author) / Navinšek, Boris (author) / Pelicon, Primož (author) / Budnar, Miloš (author) / Zorko, Benjamin (author) / Remškar, Maja (author) / Dražić, Goran (author) / Zalar, Anton (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (597 kB)

Ekstrakcija huminskih kislin iz talnih vzorcev ter uporaba pri čiščenju industrijskih odpadnih voda (1995, volume 29, issue 1/2)

Contibutors: Petač, H. (author)

Uporaba niomola 490 K za gradnjo varjenih jeklenih rezervoarjev

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (392 kB)

1. TXT document (10 kB)

Contibutors: Vojvodič-Tuma, Jelena (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (77 kB)

High coercivities in HDDR processed Sm-Fe-Ta-N magnets

Contibutors: Žužek Rožman, Kristina (author) / McGuiness, Paul J. (author) / Kobe, Spomenka (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (163 kB)

Raziskave modificiranih kompozitov iz polipropilena in talka

Contibutors: Denac, Matjaž (author) / Musil, Vojko (author) / Makarovič, Matjaž (author) / Stropnik, Črtomir (author)

Characterization of PVD Cr-C, Cr(C,N) and Cr-N hard coatings

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (987 kB)

1. TXT document (23 kB)

Contibutors: Čekada, Miha (author) / Maček, Marijan (author) / Panjan, Peter (author) / Navinšek, Boris (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (90 kB)

Ternarni sistem polisulfon-dimetilacetatamid : voda; formiranje membrane po mokrem postopku fazne...

Contibutors: Kaiser, Vladimir (author) / Stropnik, Črtomir (author)

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (769 kB)

The exploatation of friction forces for improving the rolling processes

Contibutors: Juchkov, S.M. (author) / Lochmatov, A.P. (author) / Mamuzič, Ilija (author) / Binakevich, E.V. (author) / Shynkarenko, V.B. (author)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (356 kB)

PP filamentne preje izdelane z dodatkom lojevca

Contibutors: Demšar, Andrej (author) / Sluga, Franci (author)

Obraba na členih elevatorske verige

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (32 kB)

1. TXT document (9 kB)

Contibutors: Legat, Franc (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (188 kB)

Mikrostruktura in lastnosti površine nizko-ogljičnega jekla po obdelavi z laserjem

Contibutors: Spruk, Sonja (author) / Rodič, Alenka (author) / Praček, Borut (author)

Numbering: 1998, volume 32, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (113 kB)

Detekcija majhnih napak v odkovkih in ulitkih z metodo ultrazvočne difrakcije

Contibutors: Dukić, Predrag (author) / Dukić, Ines (author) / Kmetič, Dimitrij (author)

Setting times measurements of portland cements with pulsed USWR method

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (452 kB)

1. TXT document (11 kB)

Contibutors: Valič, Marko (author) / Stepišnik, Janez (author) / Gabrijelčič, Magda (author) / Vuk, Tomaž (author) / Reščič, Lojzka (author)

Numbering: 1999, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (112 kB)

Alloy 31 - a high alloyed Ni-Cr-Mo-steel - properties and applications for the process industry

Contibutors: Mast, Ralph (author) / Rommerskirchen, I. (author) / Schambach, L. (author) / Brill, U. (author)

Integriteta površin pri laserskem pretaljevanju siluminov

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (158 kB)

1. TXT document (22 kB)

Contibutors: Grum, Janez (author) / Božič, Slavko (author)

1. PDF document (2015 kB)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (29 kB)

Struktura in mikrostruktura jeklenih peskov, narejenih v Abrasivu Muta

Contibutors: Rudolf, Rebeka (author) / Križman, Alojz (author) / Bončina, Tonica (author)

Numbering: 1999, volume 33, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (591 kB)

Experimental study of steel behaviour in process of mushy state deformation

Contibutors: Horský, Jaroslav (author) / Raudenský, Miroslav (author) / Kotrbáček, Peter (author) / Šarler, Božidar (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (166 kB)

Pasivni postopki čiščenja metalurških izcednih voda (1995, volume 29, issue 1/2)

Contibutors: Obal, Marija (author) / Rozman, Silvester (author) / Osojnik, A. (author) / Kolenc, M. (author)

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (466 kB)

Reološke lastnosti dinamično zamreženih zlitin PP/EPDM (1995, volume 29, issue 1/2)

Contibutors: Marinović, Tatjana (author)

Effect of austempering temperature on microstructure and mechanical properties of unalloyed ducti...

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (260 kB)

1. TXT document (8 kB)

Contibutors: Bošnjak, Branka (author) / Radulović, Branko (author)

Carbothermal synthesis of submicrometer beta-SiC powder using double precursor reaction mixture (1995, volume 29, issue 1/2)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (499 kB)

1. TXT document (11 kB)

Contibutors: Kevorkijan, Varužan (author)

Možnosti za ponovno uporabo odpadnega stekla

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (373 kB)

1. TXT document (10 kB)

Contibutors: Ducman, Vilma (author) / Kovačević, Mihaela (author)