dLib.si - aluminium alloy

Numbering: 2008, volume 55, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (720 kB)

Recikliranje gnetnih aluminijevih zlitin v tovarni Impol d.d.

Contibutors: Čokl, Jernej (author) / Šafhalter, Rajko (author) / Brodnjak, Davorin (author) / Kevorkijan, Varužan (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (80 kB)

Use of artificial neural networks in ball burnishing process for the prediction of surface roughn...

Contibutors: Esme, Ugur (author) / Sagbas, Aysun (author) / Kahraman, Funda (author) / Kulekci, Mustafa Kemal (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (237 kB)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Razpad alfa-AlB12 v zlitinah Al-B in Al-Ti-B

Contibutors: Zupanič, Franc (author) / Spaić, Savo (author) / Križman, Alojz (author)

Research on the quality of the welded joint of aluminium alloy sheet AA6082-T6 using FSW, MIG and...

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (192 kB)

1. TXT document (17 kB)

Contibutors: Šibalić, Nikola (author) / Vukčević, Milan M. (author)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (979 kB)

Development of low-Si aluminum casting alloys with an improved thermal conductivity

Contibutors: Shin, Jesik (author) / Ko, Sehyun (author) / Kim, Kitae (author)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (392 kB)

1. TXT document (36 kB)

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Residual stresses in shot-peened sheets of AlMg4.5Mn alloy

Contibutors: Mišović, Mitar (author) / Tadić, Nebojša (author) / Ćulafić, Zoran (author) / Jelić, Miloš (author)

A spectrophotometric determination of boron in aluminium and aluminium alloys

Numbering: 2002, volume 36, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (163 kB)

1. TXT document (30 kB)

Contibutors: Drglin, Tatjana (author) / Naglič, Iztok (author)

Numbering: 2003, volume 37, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (68 kB)

Effects of deformation temperature on the microstructure and mechanical properties of the AA3003 ...

Contibutors: Chen, Guiqing (author) / Fu, Gaosheng (author) / Lin, Xiaodong (author) / Song, Lili (author) / Cheng, Chaozeng (author) / Wei, Tianyun (author)

1. PDF document (1199 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Numerična in eksperimentalna analiza vlečenja aluminijeve zlitine 6262

Contibutors: Cvahte, Peter (author) / Fajfar, Peter (author) / Arzenšek, Boris (author) / Rodič, Tomaž (author)

Experimental investigation of LM25 alloy reinforced with SiC, Gr and MOA particles

Numbering: 2000, volume 34, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (299 kB)

1. TXT document (15 kB)

Contibutors: Manickam, Dhanashekar (author) / Senthil Kumar, Velukkudi Santhanam (author) / Sivagnanam, Karthikeyan (author)

1. PDF document (1926 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A nondestructive experimental determination of the heat flux during cooling of direct-chill cast ...

Contibutors: Založnik, Miha (author) / Bajsič, Ivan (author) / Šarler, Božidar (author)

Thermodynamic analysis of AlSi10Mg alloy

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (277 kB)

1. TXT document (23 kB)

Contibutors: Vončina, Maja (author) / Mrvar, Primož (author) / Medved, Jože (author)

1. PDF document (1184 kB)

Numbering: 2005, volume 52, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Integriteta površin pri laserskem pretaljevanju siluminov

Contibutors: Grum, Janez (author) / Božič, Slavko (author)

1. PDF document (2015 kB)

Numbering: 1999, volume 33, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (29 kB)

The characterisation of intermetallic-compound particles in an annealed Al-Mg-Cr-Fe alloy

Contibutors: Svoboda, Milan (author) / Janovec, Jozef (author) / Jenko, Monika (author) / Vranković, Ante (author)

Numbering: 2004, volume 38, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (708 kB)

Synthesis of aluminium foams by the powder-metallurgy process

Contibutors: Paulin, Irena (author) / Šuštaršič, Borivoj (author) / Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Jenko, Monika (author)

Numbering: 2011, volume 45, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (302 kB)

The influence of iron and silicon on the microstructure of extruded, high-strength Al-Zn-Cu alloys

Contibutors: Vratnica, Maja (author) / Curovic, Jelisav (author) / Burzić, Zijah (author)

Contribution of Mn content on the pressure dose properties

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (85 kB)

1. TXT document (10 kB)

Contibutors: Medved, Jože (author) / Godicelj, Tomaž (author) / Kores, Stanislav (author) / Mrvar, Primož (author) / Vončina, Maja (author)

1. PDF document (1332 kB)

Numbering: 2012, volume 59, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Reactive wetting between molten Al alloy and ceramic particles

Contibutors: Kevorkijan, Varužan (author)

Numbering: 1998, volume 32, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (64 kB)

Mechanical and corrosion properties of AA8011 sheets and foils

Contibutors: Dalijić, Kemal (author) / Asanović, Vanja (author) / Radonjić, Dragan (author)

1. PDF document (1242 kB)

Numbering: 2006, volume 40, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Quasicrystal-strengthened cast Al-alloys

Contibutors: Zupanič, Franc (author) / Bončina, Tonica (author) / Rozman, Niko (author) / Markoli, Boštjan (author)

Numbering: 2011, volume 58, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (696 kB)

Forming-limit diagrams and strain-rate-dependent mechanical properties of AA6019-T4 and AA6061-T4...

Contibutors: Çavuşoglu, Onur (author) / Leacock, Alan Gordon (author) / Gürün, Hakan (author)

1. PDF document (1015 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructures of the Al-Fe-Cu-X alloys prepared at various solidification rates

Contibutors: Voděrová, Milena (author) / Novák, Pavel (author) / Průša, Filip (author) / Vojtěch, Dalibor (author)

1. PDF document (2512 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Low-temperature transport properties of the epsilon-phases Al-Pd-(Mn, Fe, Co, Rh)

Contibutors: Stanić, Denis (author) / Smiljanić, Igor (author) / Barišić, Neven (author) / Dolinšek, Janez (author) / Bilušić, Ante (author) / Lukatela, Jagoda (author) / Leontić, Boran (author) / Smontara, Ana (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (203 kB)

Investigation of the mechanical properties of a squeeze-cast LM6 aluminium alloy reinforced with ...

Contibutors: Chelladurai, Samson Jerold Samuel (author) / Arthanari, Ramesh (author) / Krishnamoorthy, Kirubaharan (author) / Shankar Selvaraj, Kamal (author) / Govindan, Prabu (author)

1. PDF document (1727 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The effect of compositional variations on the fracture toughness of 7000 Al-alloys

Contibutors: Vratnica, Maja (author) / Cvijović, Zorica (author) / Radović, Nenad (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy

Contibutors: Çelik, Yahya Hişman (author)

1. PDF document (1441 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

TEM investigation of metallic materials - an advanced technique in materials science and metallurgy

Contibutors: Jenko, Darja (author)

Numbering: 2011, volume 45, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (865 kB)

Characterisation of A 6082 aluminum alloy after thixoforming

Contibutors: Cabibbo, Marcello (author) / Evangelista, Enrico (author) / Spigarelli, Stefano (author) / Cerri, Emanuela (author)

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (404 kB)

Effects of different stirrer-pin forms on the joining quality obtained with friction-stir welding

Contibutors: Başak, Hüdayim (author) / Kaptan, Kadir (author)

1. PDF document (1997 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Influence of minor scandium and zirconium additions on the microstructure of Al and Al-5Mg alloy

Contibutors: Smolej, Anton (author) / Markoli, Boštjan (author) / Nagode, Aleš (author) / Klobčar, Damjan (author)

1. PDF document (3464 kB)

Numbering: 2015, volume 62, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Solution of temperature field in DC Cast aluminium alloy billet by the diffuse approximate method

Contibutors: Vertnik, Robert (author) / Perko, Janez (author) / Šarler, Božidar (author)

Numbering: 2004, volume 38, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (462 kB)

Refining aluminium-alloy melts with graphite rotors

Contibutors: Lichý, Petr (author) / Kroupová, Ivana (author) / Bajerová, Markéta (author) / Obzina, Tomáš (author)

1. PDF document (1028 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (10 kB)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

The structure and morphology of the surface of duplex layers after saturation of the base layer w...

Contibutors: Skoneczny, Władysław (author)

1. PDF document (1119 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Influence of the tool geometry and process parameters on the static strength and hardness of fric...

Contibutors: Güler, Hande (author)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (561 kB)

Some new directions in aluminum-based PM materials for automotive applications

Contibutors: Vukčević, Mira (author) / Dejilić, Kemal (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (238 kB)

Značilnosti kontinuirno ulitih kompozitov Al/SiC

Contibutors: Šuštaršič, Borivoj (author) / Torkar, Matjaž (author) / Breskvar, Bojan (author) / Kevorkijan, Varužan (author) / Smolej, Anton (author) / Nardin, Vladimir (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (161 kB)

Characterization of solidification and hot workability of MgAl6Mn foundry alloy

Contibutors: Mrvar, Primož (author) / Terčelj, Milan (author) / Kugler, Goran (author) / Fazarinc, Matevž (author) / Medved, Jože (author)

1. PDF document (1277 kB)

Numbering: 2006, volume št. 2, letn. 53

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Friction-stir welding of aluminium alloy 5083

Contibutors: Klobčar, Damjan (author) / Kosec, Ladislav (author) / Pietras, Adam (author) / Smolej, Anton (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

Analiza temperaturnega polja na delovni površini orodja za tlačno litje z uporabo termografije

Contibutors: Kosec, Borut (author) / Težak, Bojan (author) / Kosec, Ladislav (author) / Kopač, Janez (author) / Vojvodič-Tuma, Jelena (author)

Quantification of the copper phase(s) in Al-5Si-(1-4)Cu alloys using a cooling curve analysis

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (170 kB)

1. TXT document (14 kB)

Contibutors: Djurdjevic, Mile B. (author) / Manasijević, Srećko (author) / Odanović, Zoran (author) / Dolić, Natalija (author) / Radiša, Radomir (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (341 kB)

Plinsko in ionsko nitriranje orodij iz AlSI H10 in H13 za toplo ekstruzijo aluminija ter njihova ...

Contibutors: Terčelj, Milan (author) / Smolej, Anton (author) / Turk, Radomir (author)

1. PDF document (1095 kB)

Numbering: 2005, volume 52, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

FSW of aluminium alloy AlSi12

Contibutors: Klobčar, Damjan (author) / Nagode, Aleš (author) / Smolej, Anton (author) / Tušek, Janez (author)

1. PDF document (3011 kB)

Numbering: 2013, volume 60, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Microstructure characteristics of the Al-w(Cu) 4.5 % model alloy

Contibutors: Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Šarler, Božidar (author)

1. PDF document (3120 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

The characterisation! of Al-Si alloys in a thermally treated state

Contibutors: Vuksanović, Darko (author) / Martinović, Momčilo (author) / Živković, Petar (author) / Cvijović, Zorica (author) / Tripković, Snežana (author)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (362 kB)

1. TXT document (14 kB)

Razvoj sodobnih zlitin aluminija

Contibutors: Smolej, Anton (author)

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (979 kB)

Microstructural evaluation of rapidly solidified Al-7Cr melt spun ribbons

Contibutors: Jurči, Peter (author) / Dománková, Mária (author) / Hudáková, Mária (author) / Šuštaršič, Borivoj (author)

Numbering: 2007, volume 41, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (453 kB)

Simulation of macrosegregation in the DC casting of binary aluminum alloys

Contibutors: Založnik, Miha (author) / Šarler, Božidar (author) / Gobin, Dominique (author)

Effect of the grain refinement, modification and the cooling rate on microstructure of the AlSi10...

Numbering: 2004, volume 38, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (591 kB)

1. TXT document (32 kB)

Contibutors: Petrič, Mitja (author) / Medved, Jože (author) / Mrvar, Primož (author)

1. PDF document (1568 kB)

Numbering: 2006, volume 53, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Korozija aluminija in njegovih zlitin

Contibutors: Žerjav, Gregor (author) / Finšgar, Matjaž (author)

Source: Vakuumist

Numbering: 2016, volume 36, issue 2

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (596 kB)

1. TXT document (30 kB)

Possibilities for eliminating a larger amount of iron in the secondary AlSi6Cu4 alloy with chrome

Contibutors: Bolibruchová, Dana (author) / Richtárech, Lukáš (author) / Macko, Jozef (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (424 kB)

Thermodynamic characterization of an AlCu5.5BiSn alloy with various neodymium additions

Contibutors: Volšak, Darja (author) / Vončina, Maja (author) / Mrvar, Primož (author) / Medved, Jože (author)

1. PDF document (1123 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure of rapidly solidified and hot-pressed Al-Fe-X alloys

Contibutors: Voděrová, Milena (author) / Novák, Pavel (author) / Vojtěch, Dalibor (author)

1. PDF document (2510 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of tunneling defects on the joint strength efficiency obtained with FSW

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

Influence of the cooling rate on the microstructure development of the EN AW-AlMg4.5Mn0.7 alloy

Contibutors: Dolić, Natalija (author) / Medved, Jože (author) / Mrvar, Primož (author) / Unkić, Faruk (author)

1. PDF document (3494 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Determining the hot-deformation characteristics of A 1235 aluminum alloy using a processing map

Contibutors: Yan, Wenduan (author) / Fu, Gaosheng (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (681 kB)

Numerical determination of J-R curve using void model

Contibutors: Laš, Vladislav (author) / Očenášek, Jan (author) / Vacek, Vlastimil (author)

Numbering: 2005, volume 39, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (151 kB)

Experimental comparison of resistance spot welding and friction-stir spot welding processes for t...

Contibutors: Kulekci, Mustafa Kemal (author) / Esme, Ugur (author) / Er, Onur (author)

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (854 kB)

Improving the casting properties of high-strength aluminium alloys

Contibutors: Vojtěch, Dalibor (author) / Šerák, Jan (author) / Ekrt, Ondřej (author)

Numbering: 2004, volume 38, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (111 kB)

Influence of weld-process parameters on the material characterization of the friction-stir-welded...

Contibutors: Patil, Hiralal (author) / Soman, Sanjay (author)

1. PDF document (1876 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental analysis of the wear behavior of hybrid metal-matrix composites of LM25Al with equal...

Contibutors: Elango, Gopalakrishnan (author) / Raghunath, Busuna Kuppuswamy (author) / Palanikumar, Kayaroganam (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (891 kB)

The kinetics of precipitation in Al-Mg and Al-Mg-Cu alloy

Contibutors: Vončina, Maja (author) / Mrvar, Primož (author) / Zupanič, Franc (author) / Medved, Jože (author)

Numbering: 2007, volume 54, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (818 kB)

Modeling of water removal in direct-chill casting of aluminum-alloy billets

Contibutors: Meysami, Amirhossein (author) / Mahmoudi, Sahin (author) / Hajisafari, Mahmoud (author)

1. PDF document (2115 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (55 kB)

Ekonomski učinki predelave stranskih produktov recikliranja odpadnega aluminija in aluminijeve žl...

Contibutors: Kevorkijan, Varužan (author)

Numbering: 2001, volume 35, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (108 kB)

Dissolution of iron in aluminium alloys

Contibutors: Kores, Stanislav (author) / Vončina, Maja (author) / Mrvar, Primož (author) / Medved, Jože (author)

Numbering: 2007, volume 54, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (881 kB)

Combined influence of V and Cr on the AlSi10MgMn alloy with a high Fe level

Contibutors: Bolibruchová, Dana (author) / Žihalová, Mária (author)

1. PDF document (1827 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the processing parameters on the microstructure and properties of the ZL116 aluminium a...

Contibutors: Pan, Tingting (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Yu, Kuanping (author) / Sun, Anna (author)

1. PDF document (1446 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of the texture of an RR 58 aluminum alloy containing zirconium and lanthanides

Contibutors: Jauković, Nada (author) / Radović, Žarko (author) / Lalović, Milisav (author)

Development of aluminium alloys for aerosol cans

Numbering: 2005, volume 39, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (84 kB)

1. TXT document (15 kB)

Contibutors: Kores, Stanislav (author) / Turk, Jože (author) / Medved, Jože (author) / Vončina, Maja (author)

1. PDF document (1645 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Emissivity of aluminium alloy using infrared termography technique

Contibutors: Lanc, Zorana (author) / Strbac, Branko (author) / Zeljković, Milan (author) / Živković, Aleksandar (author) / Hadžistević, Miodrag (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of the extrusion process and heat treatment on the properties of some AA6XXX extrud...

Contibutors: Delijić, Kemal (author) / Asanović, Vanja (author) / Radonjić, Dragan (author)

Numbering: 2005, volume 39, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (592 kB)

Mechanical and metallurgical properties of aluminium and copper sheets joined by cold pressure we...

Contibutors: Ozel, Kaan (author) / Sahin, Mumin (author) / Akdogan, Aysegul (author)

Source: Strojniški vestnik

Numbering: 2008, volume 54, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (1397 kB)

1. TXT document (32 kB)

Analiza poškodb na površini orodja za tlačno litje nosilca iz aluminijeve zlitine AlSi9Cu3

Contibutors: Kosec, Borut (author) / Kosec, Ladislav (author) / Kopač, Janez (author) / Škrinjar, Anton (author)

Source: Strojniški vestnik

Numbering: 2001, volume 47, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (1125 kB)

1. TXT document (10 kB)

Tensile behaviour and fractography analyses of LM6/ZrOsub2 composites

Contibutors: Karthikeyan, Govindan (author) / Jinu, Gowtthanithankachi Raghuvaran (author)

1. PDF document (1766 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of the surface roughness on the drawing parameters of aluminum-alloy auto-body sheets

Contibutors: Delijić, Kemal (author) / Mišović, Mitar (author)

Strain-rate-dependent tensile characteristics of AA2139-T351 aluminum alloy

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (231 kB)

1. TXT document (14 kB)

Contibutors: Çavuşoglu, Onur (author) / Leacock, Alan Gordon (author) / Gürün, Hakan (author) / Güral, Ahmet (author)

1. PDF document (1181 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Aluminium-matrix nanocomposites: swarm-intelligence optimization of the microstructure and mechan...

Contibutors: Shabani, Mohsen Ostad (author) / Mazahéri, Aly (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (716 kB)

Prediction of the nugget size in resistance spot welding with a combination of a finite-element a...

Contibutors: Afshari, Davood (author) / Sedighi, Mohammad (author) / Karimi, Mohammad Reza (author) / Barsoum, Zuheir (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Three dimensional complex shapes analysis from 3D local curvature measurements

Contibutors: Parra-Denis, Estelle (author) / Moulin, Nicolas (author) / Jeulin, Dominique (author)

Source: Image analysis and stereology

Numbering: 2007, volume 26, issue 3

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

1. TXT document (23 kB)

Simulations of the shrinkage porosity of Al-Si-Cu automotive components

Contibutors: Lavtar, Lejla (author) / Petrič, Mitja (author) / Medved, Jože (author) / Taljat, Boštjan (author) / Mrvar, Primož (author)

Effect of cerium additions on the AlSi17 casting alloy

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (528 kB)

1. TXT document (11 kB)

Contibutors: Kores, Stanislav (author) / Vončina, Maja (author) / Kosec, Borut (author) / Mrvar, Primož (author) / Medved, Jože (author)

Composition and morphology of diborides in Al-Ti-B alloys after annealing at 1873 K

Numbering: 2010, volume 44, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (622 kB)

1. TXT document (15 kB)

Contibutors: Zupanič, Franc (author)

Numbering: 2008, volume 55, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

Aluminium

Contibutors: Gándara, María Josefa Freiría (author)

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (62 kB)

Determination of the critical fraction of solid during the solidification of a PM-cast aluminium ...

Contibutors: Kayikci, Ramazan (author) / Çolak, Murat (author) / Sirin, Selcuk (author) / Kocaman, Engin (author) / Akar, Neset (author)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (593 kB)

Structural stability and electronic properties of AlCu3, AlCu2Zr in AlZr3

Contibutors: Cheng, Rong (author) / Wu, Xiao-Yu (author)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (257 kB)

Influence of the thermo-mechanical treatment on the exfoliation and pitting corrosion of an AA508...

Contibutors: Halap, Akram (author) / Popović, Miljana (author) / Radetić, Tamara (author) / Vaščić, Veselin (author) / Romhanji, Endre (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (332 kB)

Investigation of the effect of temper condition on the friction-stir weldability of AA7075 Al-all...

Contibutors: Ipekoglu, Güven (author) / Kiral, Binnur Gören (author) / Erim, Seçil (author) / Çam, Gürel (author)

1. PDF document (3154 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Interaction between Al 99.5 and stainless steel at elevated temperature and pressure

Contibutors: Vončina, Maja (author) / Salihagić Hrenko, Haris (author) / Medved, Jože (author)

1. PDF document (5086 kB)

Numbering: 2015, volume 62, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Effect of heat treatment on the microstructure and mechanical properties of piston alloys

Contibutors: Manasijević, Srećko (author) / Marković, Srđan (author) / Aćimović-Pavlović, Zagorka (author) / Raić, Karlo (author) / Radiša, Radomir (author)

1. PDF document (2189 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Characterization of the grains in 2014 aluminium alloy after equal channel angular extrusion (ECA...

Contibutors: Boczkal, Sonia (author) / Lech-Grega, Marzena (author) / Szymański, Wojciech (author)

Source: Image analysis and stereology

Numbering: 2006, volume 25, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (2764 kB)

1. TXT document (17 kB)

Effect of iron and cerium additions on rapidly solidified Al-TM-Ce alloys

Contibutors: Michalcová, Alena (author) / Vojtěch, Dalibor (author) / Schumacher, Gerhard (author) / Novák, Pavel (author) / Pližingrová, Eva (author)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (938 kB)

The ductility and corrosion properties of some AA5XXX auto body sheets

Contibutors: Delijić, Kemal (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (371 kB)

A cost effective foundry method for the preparation of structural grade discontinuously reinforce...

Contibutors: Kevorkijan, Varužan (author) / Hexemer, R. (author)

Solidification and precipitation behaviour in the AlSi9Cu3 alloy with various Ce additions

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (70 kB)

1. TXT document (30 kB)

Contibutors: Vončina, Maja (author) / Kores, Stanislav (author) / Mrvar, Primož (author) / Medved, Jože (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (508 kB)

Overitev trajnosti aluminijastih sestavnih delov

Contibutors: Grubišić, Vatroslav (author)

Source: Strojniški vestnik

Numbering: 2007, volume 53, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (335 kB)

1. TXT document (29 kB)

Use of the ABI technique to measure the mechanical properties of aluminium alloys

Contibutors: Puchnin, Maxim (author) / Trudonoshyn, Oleksandr (author) / Prach, Olena (author)

1. PDF document (1289 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Forming aspects of high-strength Al-Mg alloy sheet

Contibutors: Romhanji, Endre (author) / Glišić, Dragomir (author) / Milenković, Vojin (author)

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (319 kB)