Digitalna knjižnica Slovenije

Wear level influence on chip segmentation and vibrations of the cutting tool

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

1. TXT document (30 kB)

Contibutors: Antić, Aco (author) / Kovačevič, Dušan (author) / Zeljković, Milan (author) / Kosec, Borut (author) / Novak Marcinčin, Jozef (author)

Source: RMZ-materials and geoenvironment

Numbering: 2011, volume 58, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (695 kB)

1. TXT document (29 kB)

Tribološke lastnosti jekla nitriranega v plazmi in prekritega z DLC-prevleko

Contibutors: Podgornik, Bojan (author) / Vižintin, Jožef (author) / Leskovšek, Vojteh (author) / Ronkainen, Helena (author) / Holmberg, Kenneth (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (271 kB)

Laser cladding of Ti-6Al-4V alloy with vanadium carbide particles

Contibutors: El-Labban, H. F. (author) / Mahmoud, E. R. I. (author) / Al-Wadai, H. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1961 kB)

Odrezovanje mehkih materialov z velikimi hitrostmi

Contibutors: Pušavec, Franci (author) / Krajnik, Peter (author) / Kopač, Janez (author)

Influence of the process parameters on high-velocity oxygen-fuel-sprayed 75Cr3C2-25NiCr coatings

Numbering: 2006, volume 52, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (835 kB)

1. TXT document (67 kB)

Contibutors: Nagulan, BalaGanesh (author) / Thamilkolundu, SenthilKumar (author) / Murugesan, Chandrasekar (author)

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of the adhesion and wear properties of borided AISI H10 steel

Contibutors: Gunes, Ibrahim (author) / Ozcatal, Melih (author)

1. PDF document (2407 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the electromagnetic compound field on the grain growth and wear resistance of a Cu-Pb m...

Contibutors: Li, Ziyang (author) / Yu, Ting (author) / Wang, Dongxin (author) / Geng, Guihong (author)

1. PDF document (1895 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of an electromagnetic field on the microstructure and properties of Cr(Ti)AlN hard coating...

Contibutors: Wang, Jin (author) / Ma, Dayan (author) / Liu, Qi (author) / Jin, Yetang (author) / Wang, Xu (author)

1. PDF document (1675 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Obraba na členih elevatorske verige

Contibutors: Legat, Franc (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (188 kB)

Investigation of tribological behavior of AA8011-ZrB2 in-situ cast-metal-matrix composites

Contibutors: Munivenkatappan, Muthamizh Selvan Bellamballi (author) / Veeramani, Anandakrishnan (author) / Muthukannan, Duraiselvam (author)

1. PDF document (1572 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Raziskave postopka neposrednega laserskega sintranja

Contibutors: Dolinšek, Slavko (author)

Structure and properties of the carburised surface layer on 35CrSiMn5-5-4 steel after nanostructu...

Numbering: 2004, volume 50, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (931 kB)

1. TXT document (39 kB)

Contibutors: Skołek, Emilia (author) / Wasiak, Krzysztof (author) / Świątnicki, Wiesław A. (author)

1. PDF document (2871 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Vpliv trenja, poti, drsne hitrosti in pritiska na obrabo

Contibutors: Uranc, Franc (author)

Source: Železarski zbornik

Numbering: 1987, volume 21, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (930 kB)

Sliding-wear behavior of aluminum-matrix composites reinforced with graphene and SiC nanoparticles

Contibutors: Zheng, Kaifeng (author) / Du, Xiaoming (author) / Liu, Fengguo (author) / Sun, Bo (author) / Zhao, Tong (author)

1. PDF document (2860 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Wear-resistant single-phase high-entropy alloy coatings prepared on TI6AL4V with laser cladding

Contibutors: Juan, Yongfei (author) / Jun, Li (author) / Jiang, Yunqiang (author) / Jia, Wanli (author) / Lu, Zhongjie (author)

1. PDF document (3494 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Obraba jekla 100 Cr6 pri majhnih oscilacijah

Contibutors: Vižintin, J. (author) / Vodopivec, Franc (author)

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (840 kB)

Influence of scanning speed on the intermetallic produced in-situ in laser-metal-deposited TiC/Ti...

Contibutors: Mahamood, Rasheedat Modupe (author) / Akinlabi, Esther T. (author)

1. PDF document (1703 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Obraba orodij pri odrezovanju z velikimi hitrostmi

Contibutors: Kopač, Janez (author)

1. PDF document (3732 kB)

Numbering: 2004, volume 50, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Modeliranje obrabe oploščenih orodij pri drsnem kontaktu z mehkejšo vročo kovino s celičnimi avtomati

Contibutors: Terčelj, Milan [05206] (project leader)

Duration: 2011 2008/01 02

Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije

1. PDF document (492 kB)

1. TXT document (48 kB)

Razvoj sistema za nadzor obrabe orodja pri struženju na temelju nevronskih mrež

Contibutors: Antić, Aco (author) / Hodolič, Janko (author) / Soković, Mirko (author)

1. PDF document (1281 kB)

Numbering: 2006, volume 52, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (48 kB)

Models of reliability for cutting tools

Contibutors: Dašić, Predrag (author) / Natsis, Athanassios (author) / Petropoulos, G. (author)

Numbering: 2008, volume 54, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (484 kB)

An investigation of the economics of using welded layers for some parts of worm presses for the e...

Contibutors: Marušić, Vlatko (author) / Kljajin, Milan (author) / Marušić, Sanja (author)

Numbering: 2009, volume 43, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (416 kB)

Kvaliteta abrazijsko odpornih navarov (1995, volume 29, issue 1/2)

Contibutors: Kejžar, Rajko (author) / Živkovič, V. (author)

Vpliv mazalnih razmer na tribološko vedenje materialov tesnilnih obročev v mehanskih drsnih tesnilih

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (456 kB)

1. TXT document (13 kB)

Contibutors: Vezjak, Anton (author) / Vižintin, Jože (author)

Numbering: 2002, volume 36, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (341 kB)

Effect of sliding speed on the frictional behavior and wear performance of borided and plasma-nit...

Contibutors: Gunes, Ibrahim (author)

1. PDF document (4400 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Popravilo z navarjanjem obrabljene transportne plošče

Contibutors: Novaković, Dragan B. (author)

The influence of tool wear on the chip-forming mechanism and tool vibrations

Numbering: 1993, volume 27, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (411 kB)

1. TXT document (14 kB)

Contibutors: Antić, Aco (author) / Petrović, Petar B. (author) / Zeljković, Milan (author) / Kosec, Borut (author) / Hodolič, Janko (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (660 kB)

Wear behavior of Al/SiC/graphite and Al/FeB/graphite hybrid composites

Contibutors: Şahin, Salim (author) / Yüksel, Nilay (author) / Durmuş, Hülya (author) / Gençalp Irizalp, Simge (author)

1. PDF document (5039 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Aluminum matrix composites reinforced with nano TiC particles: microstructure and wear behaviour

Contibutors: Lu, Yalin (author) / Zhou, Dongshuai (author) / Li, Xingcheng (author) / Wang, Jian (author) / Li, Wen (author) / Bai, Zhihao (author)

1. PDF document (3960 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Spremljanje obrabe vijačnega svedra (S390) z uporabo nevronskih mrež

Contibutors: Krivokapić, Zdravko (author) / Zogović, Vukašin (author) / Spaić, Obrad (author)

Wear mechanisms and surface engineering of forming tools

Numbering: 2006, volume 52, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (240 kB)

1. TXT document (15 kB)

Contibutors: Podgornik, Bojan (author) / Leskovšek, Vojteh (author)

1. PDF document (1242 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Friction and wear behaviour of ulexite and cashew in automotive brake pads

Contibutors: Sugözü, Ilker (author) / Mutlu, Ibrahim (author) / Keskin, Ahmet (author)

1. PDF document (1170 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the abrasive grit size on the wear behavior of ceramic coatings during a micro-abrasion...

Contibutors: Korkut, Mehmet Horik (author) / Küçük, Yilmaz (author) / Karaoglanli, Abdullah Cahit (author) / Erdogan, Azmi (author) / Er, Yusuf (author) / Gök, Mustafa Sabri (author)

1. PDF document (1586 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of ironing process depending on applied tool materials and coatings

Contibutors: Adamović, Dragan (author) / Mandić, Vesna (author) / Terčelj, Milan (author) / Stefanović, Milentije (author) / Živković, Miroslav (author)

Source: RMZ-materials and geoenvironment

Numbering: 2012, volume 59, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (2046 kB)

Študij lastnosti pozlačenega kontaktnega materiala Palladec 21 v odvisnosti od obrabe in atmosfer...

Contibutors: Koller, Lidija (author) / Jenko, Monika (author) / Spruk, Sonja (author) / Railič, Drago (author)

Effect of different surface-heat-treatment methods on the surface properties of AISI 4140 steel

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (572 kB)

1. TXT document (13 kB)

Contibutors: Ayday, Aysun (author) / Durman, Mehmet (author)

Microstructure, wear resistance and microhardness of W-particle-strengthened Ti6Al4V composite pr...

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (886 kB)

1. TXT document (14 kB)

Contibutors: Ndou, Ndivhuwo (author) / Akinlabi, Esther T. (author)

1. PDF document (1128 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A modified heat treatment to improve the properties of double-layer cast rolls

Contibutors: Sedlaček, Marko (author) / Podgornik, Bojan (author) / Milanović, Slobodan (author)

Machinability of a Ti-6Al-4V alloy with cryogenically treated cemented carbide tools

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (589 kB)

1. TXT document (29 kB)

Contibutors: Mavi, Ahmet (author) / Korkut, Ihsan (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (899 kB)

Tribological behaviour of a plasma-sprayed Al203-TiO2-Cr2O3 coating

Contibutors: Sert, Yeşim (author) / Toplan, Nil (author)

Influence of the substrate hardness and fracture toughness on the dynamic wear properties of coat...

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (334 kB)

1. TXT document (12 kB)

Contibutors: Sedlaček, Marko (author) / Šetina, Barbara (author) / Česnik, Damir (author) / Podgornik, Bojan (author)

1. PDF document (2978 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Odpornost orodnih jekel proti trem vrstam obrabe

Contibutors: Uranc, Franc (author)

An investigation of the number of inserts effect on the machining time and metal removal rate dur...

Numbering: 2000, volume 34, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (56 kB)

1. TXT document (18 kB)

Contibutors: Dilipak, Hakan (author) / Güldaş, Abdulmecit (author) / Gezgin, Akin (author)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (366 kB)

High pressure cooling in the machining of hard-to-machine materials

Contibutors: Kramar, Davorin (author) / Kopač, Janez (author)

1. PDF document (1299 kB)

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (34 kB)

Wear of refractory materials for ceramic filters of different porosimetry in contact with hot metal

Contibutors: Bažan, Jiří (author) / Socha, Ladislav (author) / Martínek, Ludvík (author) / Fila, Pavel (author) / Balcar, Martin (author) / Chmelař, Jaroslav (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (487 kB)

Wear resistance and dynamic fracture toughness of hypoeutectic high-chromium white cast iron allo...

Contibutors: Filipović, Mirjana (author) / Kamberović, Željko (author) / Korać, Marija (author) / Anđić, Zoran (author)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (904 kB)

Razvoj in pomen tribologije doma in v svetu

Contibutors: Vižintin, Jože (author)

1. PDF document (1084 kB)

Numbering: 1992, volume 26, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. TXT document (28 kB)

Analysis of nanowear and thin films using AES and XPS

Contibutors: Grant, John T. (author)

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (607 kB)

Otopitev orodja za obdelavo in predelavo lesa

Contibutors: Naglić, Vladimir (author)

Source: Les (Ljubljana)

Numbering: 2001, volume 53, issue 7/8

Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (415 kB)

1. TXT document (24 kB)

Effect of B4C addition on the microstructure, hardness and dry-sliding-wear performance of AZ91 c...

Contibutors: Özdemir Öge, Tuba (author) / Öge, Mecit (author) / Yilmaz, Volkan (author) / Banu Özdemir, Firdevs (author)

1. PDF document (3665 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Tribological behaviour of A356/10SiC/3Gr hybrid composite in dry-sliding conditions

Contibutors: Stojanović, Blaza (author) / Babić, Miroslav (author) / Miloradović, Nenad (author) / Mitrovic, Slobodan (author)

1. PDF document (2705 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Obraba rudarskih naprav in orodij za hladno oblikovanje jekla

Contibutors: Uranc, Franc (author)

Source: Železarski zbornik

Numbering: 1974, volume 8, issue 3

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1563 kB)

1. TXT document (30 kB)

Umetni kolčni sklepi kovina/kovina

Contibutors: Milošev, Ingrid (author) / Pišot, Venčeslav (author)

Source: Vakuumist

Numbering: 2001, volume 21, issue 3

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (1588 kB)

1. TXT document (13 kB)

Influence of alloying elements on the mechanical properties of a cobalt-based alloy produced with...

Contibutors: Nová, Kateřina (author) / Novák, Pavel (author) / Dvorský, Drahomír (author)

1. PDF document (1692 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of Al2O3 nanoparticles on the tribological properties of stainless steel

Contibutors: Kračun, Ana (author) / Tehovnik, Franc (author) / Kafexhiu, Fevzi (author) / Kosec, Tadeja (author) / Feizpour, Darja (author) / Podgornik, Bojan (author)

1. PDF document (2593 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of severe air-blast shot peening on the wear characteristics of CP titanium

Contibutors: Karaoglanli, Abdullah Cahit (author)

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (877 kB)

Merjenje obrabne obstojnosti strukturne keramike Alspodaj2Ospodaj3

Contibutors: Ambrožič, Milan (author) / Veskovič Bukudur, Stojana (author) / Kosmač, Tomaž (author) / Krnel, Kristoffer (author) / Eterovič, Darko (author) / Petkovič, Natalija (author) / Pribošič, Irena (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (188 kB)

Investigation of wear behavior of borided AISI D6 steel

Contibutors: Gunes, Ibrahim (author) / Kanat, Salih (author)

1. PDF document (2409 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Experimental analysis of the wear behavior of hybrid metal-matrix composites of LM25Al with equal...

Contibutors: Elango, Gopalakrishnan (author) / Raghunath, Busuna Kuppuswamy (author) / Palanikumar, Kayaroganam (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (891 kB)

Izračun kontaktnih temperatur v fretinških razmerah

Contibutors: Kalin, Mitjan (author) / Vižintin, Jože (author)

Roll wear modeling using genetic programming - industry case study

Numbering: 2001, volume 47, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (212 kB)

1. TXT document (47 kB)

Contibutors: Kovačič, Miha (author) / Mihevc, Andrej (author) / Terčelj, Milan (author)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (814 kB)

Obrabna odpornost konstrukcijskega jekla, nitriranega v plazmi

Milijardna zguba vsled obrabe

Source: Slovenski gospodar

Numbering: 20.03.1935, volume 69, issue 12

Provider: Narodna in univerzitetna knjižnica

1. PDF document (536 kB)

1. TXT document (2 kB)

Contibutors: Podgornik, Bojan (author) / Vižintin, Jože (author) / Leskovšek, Vojteh (author)

Numbering: 2001, volume 47, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (655 kB)

Determination of the cutting-tool performance of high-alloyed white cast iron (Ni-Hard 4) using t...

Contibutors: Kir, Durmuş (author) / Öktem, Hasan (author) / Çöl, Mustafa (author) / Koç, Funda Gül (author) / Erzincanli, Fehmi (author)

1. PDF document (1430 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Temperatura in temperaturni gradient med fretting preizkusom 1% C in 1.5% Cr jekla (1996, volume 30, issue 1/2)

Contibutors: Vodopivec, Franc (author) / Vižintin, Jože (author)

1. PDF document (1091 kB)

Provider: Narodna in univerzitetna knjižnica

Electroless Ni-B-W coatings for improving hardness, wear and corrosion resistance

Contibutors: Aydeniz, Ali Imre (author) / Göksenli, Ali (author) / Dil, Gökce (author) / Muhaffel, Faiz (author) / Calli, Cagdas (author) / Yüksel, Behiye (author)

1. PDF document (1210 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (18 kB)

Testing the tribological characteristics of nodular cast iron austempered by a conventional and a...

Contibutors: Golubović, Dušan (author) / Kovač, Pavel (author) / Savković, Borislav (author) / Ješić, Dušan (author) / Gostimirović, Marin (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (395 kB)

Investigation of a tool and workpiece machined using a nickel-nanocoated insert

Contibutors: Manoj, Sureshkumar (author) / Gandhi, Veeramalai Chinnasamy Sathish (author)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (657 kB)

Characterization and wear performance of CrAgN thin films deposited on Cr-V ledeburitic tool steel

Contibutors: Jurči, Peter (author) / Bohovičová, Jana (author) / Hudáková, Mária (author) / Bílek, Pavel (author)

The effect of vanadium content on the properties of Fe-C-Cr-V white cast iron

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (728 kB)

1. TXT document (53 kB)

Contibutors: Unkić, Faruk (author) / Preloščan, Andrija (author) / Djukić, Višnja (author)

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (418 kB)

Surface modifications of Maraging steels used in the manufacture of moulds and dies

Contibutors: Cajner, Franjo (author) / Landek, Darko (author) / Leskovšek, Vojteh (author)

Selection of the most appropriate welding technology for hardfacing of bucket teeth

Numbering: 2010, volume 44, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (726 kB)

1. TXT document (28 kB)

Contibutors: Lazić, Vukić (author) / Sedmak, Aleksandar (author) / Nikolić, Ružica R. (author) / Mutavdžić, Milan (author) / Aleksandrović, Srbislav (author) / Krstić, Božidar (author) / Milosavljević, Dragan (author)

1. PDF document (3734 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Uporaba trdih prevlek PVD v strojništvu - možnosti in omejitve

Contibutors: Podgornik, Bojan (author) / Vižintin, Jože (author)

1. PDF document (1035 kB)

Numbering: 2003, volume 49, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Diamond tools for machining of granite and their wear

Contibutors: Kenda, Jani (author) / Kopač, Janez (author)

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (957 kB)

Experimental study and analysis of the wear properties of friction-stir-welded AA7075-T6 and A384...

Contibutors: Anganan, Karuppannan (author) / Prabagaran, Subramaniam (author) / Muthukrishnan, Mayakrishnan (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Radiometrično zasledovanje obrabe ponevčnih opek

Contibutors: Hodnik, Janez (author)

Source: Železarski zbornik

Numbering: 1968, volume 2, issue 4

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1019 kB)

Wear mechanism of duplex-coated P/M vanadis 6 ledeburitic steel

Contibutors: Jurči, Peter (author) / Hudáková, Mária (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (397 kB)

Properties of Alsub2Osub3/TiOsub2 and ZrOsub2/CaO flame-sprayed coatings

Contibutors: Czupryński, Artur (author)

1. PDF document (1652 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Study of the properties and structure of selected tool steels for cold work depending on the para...

Contibutors: Kuřík, Martin (author) / Lacza, Jakub (author) / Vlach, Tomáš (author) / Sobotová, Jana (author)

1. PDF document (1435 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Variations in the properties of copper-alumina nanocomposites synthesized by mechanical alloying

Contibutors: Amirthagadeswaran, Koduvayur Sankaranarayanan (author)

1. PDF document (1648 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Tribokemijske spremembe med jeklom in keramiko v fretinških razmerah

Contibutors: Kalin, Mitjan (author) / Vižintin, Jože (author)

1. PDF document (1639 kB)

Numbering: 2001, volume 47, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (65 kB)

Primerjalno preizkušanje obrabne obstojnosti orodnih jekel

Contibutors: Vižintin, Jože (author) / Tomšič, Edvard (author) / Uranc, Franc (author) / Grešovnik, Ferdo (author) / Šegel, Jože (author)

1. PDF document (1745 kB)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

Influence of graphite on the hardness and wear behavior of AA6061-B4C composite

Contibutors: Prabagaran, Subramaniam (author) / Chandramohan, Govindarajulu (author) / Shanmughasundaram, Palanisamy (author)

1. PDF document (1403 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...

Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (943 kB)

1. TXT document (47 kB)

Študij legiranja navara pri navarjanju obrabno obstojnih nanosov pod legirnimi varilnimi praški

Contibutors: Kejžar, Rajko (author)

Erosion of mold-steel surface oxidation and nitriding layers due to a die-casting aluminum alloy

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (378 kB)

1. TXT document (24 kB)

Contibutors: Cao, Han-xue (author) / Liu, Yun-hao (author) / Shen, Chao (author) / Tang, Hao-xing (author) / Huang, Yan-yan (author) / Lei, Jia-le (author)

1. PDF document (1070 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Wear properties of ceramic bodies produced with natural zeolite

Contibutors: Demirkiran, Ayse Şükran (author)

1. PDF document (1540 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (10 kB)

Nova eksperimentalna metoda za določevanje obrabe orodij v laboratoriju (1997, volume 31, issue 5)

Contibutors: Nardin, Vladimir (author) / Terčelj, Milan (author) / Turk, Radomir (author) / Rodič, Tomaž (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (973 kB)

Spremljanje obrabe rezalnega orodja z uporabo signalov krmilnega sistema

Contibutors: Mulc, Tihomir (author) / Udiljak, Toma (author) / Čuš, Franc (author) / Milfelner, Matjaž (author)

Microstructure and mechanical properties of Stellite 6 alloy powders incorporated with Ti/B4C usi...

Numbering: 2004, volume 50, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (781 kB)

1. TXT document (46 kB)

Contibutors: Zhu, Zhi-Yuan (author) / Ouyang, Chun (author) / Chen, Jia-Huan (author) / Qiao, Yanxin (author)

1. PDF document (2495 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Evaluation of the wear behavior of nitride-based PVD coatings using different multi-criteria deci...

Contibutors: Kucuk, Yilmaz (author) / Öztel, Ahmet (author) / Balalý, Mehmet Yavuz (author) / Öge, Mecit (author) / Gök, Mustafa Sabri (author)

Condition monitoring of milling tool wear based on fractal dimension of vibration signals

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (285 kB)

1. TXT document (52 kB)

Contibutors: Xu, Chuangwen (author) / Chen, Hualing (author) / Liu, Zhe (author) / Cheng, Zhongwen (author)

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (341 kB)

The friction and wear behavior of Cu-Nisub3Al composites by dry sliding

Contibutors: Demirel, Mehtap (author) / Muratoglu, Mehtap (author)

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (348 kB)

Vzporedni vplivi pospeška in površinskega ogrevanja na stisljiv tok

Contibutors: Ozalp, A. Alper (author)

Effects of an addition of coir-pith particles on the mechanical properties and erosive-wear behav...

Numbering: 2007, volume 53, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (411 kB)

1. TXT document (34 kB)

Contibutors: Jose, Arul Sujin (author) / Athijayamani, Ayyanar (author) / Ramanathan, Kalimuthu (author) / Sidhardhan, Susaiyappan (author)

Establishment of a multi-particle erosion model based on the low-cycle fatigue law

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (805 kB)

1. TXT document (57 kB)

Contibutors: Li, Mingfei (author) / Dou, Yihua (author) / Li, Hong (author) / Cheng, Jiarui (author) / Wei, Wenlan (author)

Strženske žice za reparaturno vzdrževanje (1996, volume 30, issue 3/4)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (687 kB)

1. TXT document (29 kB)

Contibutors: Kejžar, Rajko (author) / Ogrizek, Mirko (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (677 kB)

In-situ synthesis of titanium carbide particles in an iron matrix during diode-laser surface allo...

Contibutors: Janicki, Damian (author)

1. PDF document (1658 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)