Number of hits: 144
Source type
journals (141)
theses and dissertations (3)
Journals - titles
Acta medico-biotechnica (1)
Advances in production engineering and management (2)
Anali PAZU (1)
Fizioterapija (Ljubljana) (1)
Gradbeni vestnik (1)
Image analysis and stereology (1)
Informatica (Ljubljana) (1)
Kovine zlitine tehnologije (7)
Livarski vestnik (29)
Materiali in tehnologije (76)
Rehabilitacija (Ljubljana) (2)
RMZ-materials and geoenvironment (5)
Strojniški vestnik (7)
Vakuumist (1)
Železarski zbornik (6)
Journals - form
articles (137)
journals (4)
Language
english (117)
serbo-croatian – cyrlic (1)
serbo-croatian – latin (1)
slovenian (57)
Date
1980 (1)
1981 (3)
1982 (1)
1984 (1)
1995 (1)
1997 (3)
1998 (2)
1999 (1)
2000 (2)
2001 (1)
2002 (2)
2004 (3)
2005 (2)
2006 (2)
2007 (2)
2008 (2)
2009 (3)
2010 (3)
2011 (1)
2012 (7)
2013 (5)
2014 (11)
2015 (15)
2016 (12)
2017 (10)
2018 (15)
2019 (9)
2020 (8)
2021 (7)
2022 (6)
2023 (3)
Location
Društvo livarjev Slovenije (29)
Društvo za stereologijo in kvantitativno analizo slike (1)
Društvo za vakuumsko tehniko Slovenije (1)
Inštitut za kovinske materiale in tehnologije (80)
Narodna in univerzitetna knjižnica (9)
Slovensko društvo Informatika (1)
Univerza v Ljubljani, Fakulteta za strojništvo (9)
Univerza v Ljubljani, Naravoslovnotehniška fakulteta (5)
Univerza v Mariboru, Fakulteta za elektrotehniko računalništvo in informatiko (1)
Univerza v Mariboru, Fakulteta za strojništvo (1)
Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (1)
Univerza v Mariboru, Medicinska fakulteta (1)
Univerzitetni rehabilitacijski inštitut RS – Soča (2)
Združenje fizioterapevtov Slovenije (1)
Združenje Pomurska akademsko znanstvena unija (1)
Zveza društev gradbenih inženirjev in tehnikov Slovenije (1)
Content
Chemical Engineering (59)
Computer Science (1)
Construction (3)
Engineering and Technology (76)
Fine Art (1)
Industry, Craft, Handicraft (3)
Mathematics (2)
Medicine (5)
Physics (6)
Publisher
Association of Mechanical Engineers and Technicians of Slovenia et al. (4)
D. Tomažinčič (1)
Društvo fizioterapevtov Slovenije (1)
Društvo livarjev Slovenije (29)
Društvo za stereologijo in kvantitativno analizo slike, Medicinska fakulteta (1)
Društvo za vakuumsko tehniko Slovenije (1)
Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (2)
Inštitut za kovinske materiale in tehnologije (83)
Inštitut za rudarstvo, geotehnologijo in okolje (5)
Medicinska fakulteta (1)
Metalurški inštitut el at. (6)
Naravoslovnotehniška fakulteta (5)
PAZU (1)
R. Markežič (1)
Slovensko društvo Informatika (1)
Š. Kohek (1)
Univerzitetni rehabilitacijski inštitut Slovenije - Soča (2)
Zveza društev gradbenih inženirjev in tehnikov Slovenije (1)
Zveza strojnih inženirjev in tehnikov Slovenije et al. (4)
Zveza strojnih inženirjev in tehnikov Slovenije etc. (3)
Železarna Jesenice (7)
Železarna Ravne (7)
Železarna Štore (7)
Rights
CC BY – Attribution (3)
CC BY-NC-ND - Attribution, Non-Commercial, No Derivatives (2)
CC BY-NC-SA - Attribution, Non-Commercial, ShareAlike (1)
In Copyright (138)
Access
Public (141)
Restricted (designated terminals) (3)
Search in (144)
Sort by:
Use of numerical simulation in the production of porous-metal castings
Contibutors: Radkovský, Filip (author) / Merta, Václav (author)
Source: Materiali in tehnologije
Numbering: 2020, volume 54, iss. 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1037 kB)
1. TXT document (12 kB)
Lasersko reparaturno varjenje termo razpok na orodjih za tlačno litje aluminija
Contibutors: Pleterski, Matej (author) / Tušek, Janez (author) / Kosec, Ladislav (author) / Klobčar, Damjan (author) / Muhič, Mitja (author) / Muhič, Tadej (author)
Source: Materiali in tehnologije
Numbering: 2008, volume 42, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (940 kB)
1. TXT document (15 kB)
Influence of structural defects on the magnetic properties of massive amorphous Fesub60Cosub10Mos...
Contibutors: Gondro, Joanna (author) / Bloch, Katarzyna (author) / Nabiałek, Marcin (author) / Garus, Sebastian (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (576 kB)
1. TXT document (24 kB)
Quantitative analysis of fatigue fracture surface in the duplex steel
Contibutors: Sozańska, Maria (author) / Iacoviello, Francesco (author) / Cwajna, Jan (author) / Jerome, Michel (author) / Sojka, Jaroslav (author) / Galland, Jacques (author)
Source: Image analysis and stereology
Numbering: 2002, volume 21, issue 1
Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)
1. PDF document (430 kB)
1. TXT document (16 kB)
A new topology for the trajectories of the meniscus during continuous steel casting
Contibutors: Risteski, Ice B. (author)
Source: Materiali in tehnologije
Numbering: 2007, volume 41, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (208 kB)
1. TXT document (57 kB)
Development of low-Si aluminum casting alloys with an improved thermal conductivity
Contibutors: Shin, Jesik (author) / Ko, Sehyun (author) / Kim, Kitae (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (392 kB)
1. TXT document (36 kB)
Control of reduction of continuous slab casting with a thermal model
Contibutors: Stetina, Jozef (author) / Ramik, Pavel (author) / Katolicky, Jaroslav (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (819 kB)
1. TXT document (18 kB)
Use of water-soluble precursors in the production of cast metal foams
Contibutors: Kroupová, Ivana (author) / Lichý, Petr (author) / Lána, Ivo (author)
Source: Materiali in tehnologije
Numbering: 2020, volume 54, iss. 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (398 kB)
1. TXT document (12 kB)
Experimental investigation of LM25 alloy reinforced with SiC, Gr and MOA particles
Contibutors: Manickam, Dhanashekar (author) / Senthil Kumar, Velukkudi Santhanam (author) / Sivagnanam, Karthikeyan (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1926 kB)
1. TXT document (20 kB)
Investigation of the mechanical properties of AlSi9Cu3(Fe)/MWCNT nanocomposites prepared by HPDC
Contibutors: Špada, Vedrana (author) / Stanić, Davor (author) / Brnardić, Ivan (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3032 kB)
1. TXT document (27 kB)
Distribution of Alsub2Osub3 reinforcement particles in austenitic stainless steel depending on th...
Contibutors: Kračun, Ana (author) / Podgornik, Bojan (author) / Tehovnik, Franc (author) / Kafexhiu, Fevzi (author) / Jenko, Darja (author)
Source: Materiali in tehnologije
Numbering: 2017, volume 51, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3935 kB)
1. TXT document (48 kB)
Detekcija majhnih napak v odkovkih in ulitkih z metodo ultrazvočne difrakcije
Contibutors: Dukić, Predrag (author) / Dukić, Ines (author) / Kmetič, Dimitrij (author)
Source: Kovine zlitine tehnologije
Numbering: 1998, volume 32, issue 1/2
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (452 kB)
1. TXT document (11 kB)
Tehnološke in praktične izkušnje pri kontinuirnem vlivanju jekel z vsebnostjo aluminija na petžil...
Contibutors: Arh, Joža (author) / Demšar, Marjan (author) / Mlakar, Anton (author) / Debelak, Milan (author)
Source: Železarski zbornik
Numbering: 1981, volume 15, issue 3
Provider: Narodna in univerzitetna knjižnica
1. PDF document (2105 kB)
1. TXT document (42 kB)
Investigation of tribological behavior of AA8011-ZrB2 in-situ cast-metal-matrix composites
Contibutors: Munivenkatappan, Muthamizh Selvan Bellamballi (author) / Veeramani, Anandakrishnan (author) / Muthukannan, Duraiselvam (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1572 kB)
1. TXT document (33 kB)
Numerical optimization of the method of cooling of a massive casting of ductile cast-iron
Contibutors: Kavička, František (author) / Sekanina, Buhumil (author) / Stetina, Jozef (author) / Stransky, Karel (author) / Gontarev, Vasilij (author) / Dobrovská, Jana (author)
Source: Materiali in tehnologije
Numbering: 2009, volume 43, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (680 kB)
1. TXT document (21 kB)
Development of composite salt cores for foundry applications
Contibutors: Beňo, Jaroslav (author) / Adámková, Eliška (author) / Mikšovský, František (author) / Jelínek, Petr (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (414 kB)
1. TXT document (20 kB)
The introduction of fine SiC particles into a molten Al alloy matrix (1995, volume 29, issue 5/6)
Contibutors: Kevorkijan, Varužan (author) / Šuštaršič, Borivoj (author)
Source: Kovine zlitine tehnologije
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (1906 kB)
1. TXT document (45 kB)
Segregiranje posameznih elementov v konti odlitkih visokoogljičnega jekla (1997, volume 31, issue 1/2)
Contibutors: Pihura, Derviš (author) / Jotanović, M. (author)
Source: Kovine zlitine tehnologije
Provider: Narodna in univerzitetna knjižnica
1. PDF document (609 kB)
1. TXT document (15 kB)
Investigation of the mechanical properties of a squeeze-cast LM6 aluminium alloy reinforced with ...
Contibutors: Chelladurai, Samson Jerold Samuel (author) / Arthanari, Ramesh (author) / Krishnamoorthy, Kirubaharan (author) / Shankar Selvaraj, Kamal (author) / Govindan, Prabu (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1727 kB)
1. TXT document (31 kB)
Influence of the water temperature on the cooling intensity of mist nozzles in continuous casting
Contibutors: Raudensky, Miroslav (author) / Hnizdil, Milan (author) / Hwang, Jong Yeon (author) / Lee, Sang Hyeon (author) / Kim, Seong Yeon (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (608 kB)
1. TXT document (17 kB)
Razvoj vibracijskih miz za vgradnjo betona v kalupe
Contibutors: Čop, Rudi (author)
Source: Kovine zlitine tehnologije
Numbering: 1998, volume 32, issue 1/2
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (52 kB)
1. TXT document (11 kB)
Prvo posvetovanje o kontinuirnem vlivanju pod naslovom: Continuous casting conference 1979
Contibutors: Arh, Joža (author) / Demšar, M. (author)
Source: Železarski zbornik
Numbering: 1980, volume 14, issue 1/2
Provider: Narodna in univerzitetna knjižnica
1. PDF document (422 kB)
1. TXT document (13 kB)
Water-soluble cores - verifying development trends
Contibutors: Adámková, Eliška (author) / Jelínek, Petr (author) / Beňo, Jaroslav (author) / Mikšovský, František (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1084 kB)
1. TXT document (22 kB)
Microstructural and phase analysis of CuAlNi shape-memory alloy after continuous casting
Contibutors: Gojić, Mirko (author) / Kožuh, Stjepan (author) / Anžel, Ivan (author) / Lojen, Gorazd (author) / Ivanić, Ivana (author) / Kosec, Borut (author)
Source: Materiali in tehnologije
Numbering: 2013, volume 47, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1313 kB)
1. TXT document (15 kB)
Analiza temperaturnega polja na delovni površini orodja za tlačno litje z uporabo termografije
Contibutors: Kosec, Borut (author) / Težak, Bojan (author) / Kosec, Ladislav (author) / Kopač, Janez (author) / Vojvodič-Tuma, Jelena (author)
Source: Materiali in tehnologije
Numbering: 2000, volume 34, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (170 kB)
1. TXT document (14 kB)
Zbirka ulitkov profesorja Milana Trbižana
Contibutors: Trbižan, Katarina (author) / Turk, Radomir (author) / Juteršek, Mirko (author) / Döpp, Reinhard (author) / Žekš, Boštjan (author) / Trbižan, Milan (author)
Source: RMZ-materials and geoenvironment
Numbering: 2006, volume 53, issue 2
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. 244367872 (596 kB)
1. TXT document (34 kB)
Developing and testing a new type-8K mould for tool-steel ingot casting
Contibutors: Balcar, Martin (author) / Sochor, Libor (author) / Železný, Rudolf (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Kraus, Libor (author) / Kešner, Dušan (author) / Bažan, Jiří (author)
Source: Materiali in tehnologije
Numbering: 2008, volume 42, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (387 kB)
1. TXT document (18 kB)
The effect of defects on tensile strength of the continuous steel casting products
Contibutors: Gojić, Mirko (author) / Lazić, Ladislav (author) / Kožuh, Stjepan (author) / Kosec, Ladislav (author)
Source: RMZ-materials and geoenvironment
Numbering: 2011, volume 58, issue 3
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (1471 kB)
1. TXT document (19 kB)
Interfacial tension at the interface of a system of molten oxide and molten steel
Contibutors: Rosypalová, Silvie (author) / Dudek, Rostislav (author) / Dobrovská, Jana (author) / Dobrovský, Ludovít (author) / Žaludová, Monika (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (225 kB)
1. TXT document (15 kB)
Rheological properties of alumina ceramic slurries for ceramic shell-mould fabrication
Contibutors: Szymańska, Joanna (author) / Wiśniewski, Paweł (author) / Małek, Marcín (author) / Mizera, Jarosław (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (333 kB)
1. TXT document (17 kB)
Developing continuous-casting-process control based on advanced mathematical modelling
Contibutors: Falkus, Jan (author) / Miłkowska-Piszczek, Katarzyna (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (601 kB)
1. TXT document (48 kB)
Simulation of macrosegregation in the DC casting of binary aluminum alloys
Contibutors: Založnik, Miha (author) / Šarler, Božidar (author) / Gobin, Dominique (author)
Source: Materiali in tehnologije
Numbering: 2004, volume 38, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (591 kB)
1. TXT document (32 kB)
Characterization of cast-iron gradient castings
Contibutors: Mitrović, Danijel (author) / Mrvar, Primož (author) / Petrič, Mitja (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1740 kB)
1. TXT document (22 kB)
Effect of particles size on the mechanical properties of SiC-reinforced aluminium 8011 composites
Contibutors: Ashok, Nagaraj (author) / Shanmughasundaram, Palanisamy (author)
Source: Materiali in tehnologije
Numbering: 2017, volume 51, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1120 kB)
1. TXT document (28 kB)
Improving the casting properties of high-strength aluminium alloys
Contibutors: Vojtěch, Dalibor (author) / Šerák, Jan (author) / Ekrt, Ondřej (author)
Source: Materiali in tehnologije
Numbering: 2004, volume 38, issue 1/2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (111 kB)
1. TXT document (18 kB)
Afinacija kontinuirno vlitega cementacijskega jekla Č.4320 z niobijem in vanadijem. Del 2 : Izdel...
Contibutors: Vodopivec, Franc (author) / Vizjak, Ferdo (author) / Senčič, Srečko (author) / Manojlović, Gojko (author) / Gnidovec, D. (author)
Source: Železarski zbornik
Numbering: 1981, volume 15, issue 4
Provider: Narodna in univerzitetna knjižnica
1. PDF document (1687 kB)
1. TXT document (30 kB)
Numerical simulation of the solidification of a steel rail-wheel casting and the optimum dimensio...
Contibutors: Grozdanić, Vladimir (author)
Source: Materiali in tehnologije
Numbering: 2002, volume 36, issue 3/4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (119 kB)
1. TXT document (12 kB)
Modeling of water removal in direct-chill casting of aluminum-alloy billets
Contibutors: Meysami, Amirhossein (author) / Mahmoudi, Sahin (author) / Hajisafari, Mahmoud (author)
Source: Materiali in tehnologije
Numbering: 2017, volume 51, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2115 kB)
1. TXT document (55 kB)
Influence of the working technology on the development of alloys H13-w(Cu) 87.5 %
Contibutors: Artiček, Uroš (author) / Bojinović, Marko (author) / Brunčko, Mihael (author) / Anžel, Ivan (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3355 kB)
1. TXT document (36 kB)
Drugo posvetovanje o kontinuirnem vlivanju pod naslovom: Continuous casting conference 1981
Contibutors: Arh, Joža (author) / Demšar, M. (author)
Source: Železarski zbornik
Numbering: 1982, volume 16, issue 1
Provider: Narodna in univerzitetna knjižnica
1. PDF document (532 kB)
1. TXT document (13 kB)
Simulation of continuous casting of steel under the influence of magnetic field using the local-r...
Contibutors: Mramor, Katarina (author) / Vertnik, Robert (author) / Šarler, Božidar (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (438 kB)
1. TXT document (25 kB)
Effect of the processing parameters on the microstructure and properties of the ZL116 aluminium a...
Contibutors: Pan, Tingting (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Yu, Kuanping (author) / Sun, Anna (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1446 kB)
1. TXT document (31 kB)
Unsteady model-based predictive control of continuous steel casting by means of a very fast dynam...
Contibutors: Klimes, Lubomir (author) / Štětina, Josef (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (807 kB)
1. TXT document (27 kB)
Development of aluminium alloys for aerosol cans
Contibutors: Kores, Stanislav (author) / Turk, Jože (author) / Medved, Jože (author) / Vončina, Maja (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1645 kB)
1. TXT document (17 kB)
Analiza poškodb na površini orodja za tlačno litje nosilca iz aluminijeve zlitine AlSi9Cu3
Contibutors: Kosec, Borut (author) / Kosec, Ladislav (author) / Kopač, Janez (author) / Škrinjar, Anton (author)
Source: Strojniški vestnik
Numbering: 2001, volume 47, issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (1125 kB)
1. TXT document (10 kB)
Impact of casting speed on the temperature field of continuously cast steel billets
Contibutors: Klimes, Lubomir (author) / Stetina, Jozef (author) / Bucek, Pavol (author)
Source: Materiali in tehnologije
Numbering: 2013, volume 47, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1243 kB)
1. TXT document (30 kB)
Final-structure prediction of continuously cast billets
Contibutors: Mauder, Tomáš (author) / Štětina, Josef (author) / Klimeš, Lubomír (author) / Kavička, František (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (624 kB)
1. TXT document (21 kB)
Influence of the hip process on the properties of as-cast Ni-based alloys
Contibutors: Malcharcziková, Jitka (author) / Pohludka, Martin (author) / Michenka, Vít (author) / Čegan, Tomáš (author) / Juřica, Jan (author) / Kursa, Miroslav (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2014 kB)
1. TXT document (16 kB)
Preparation of metal-fiber-reinforced Al-Si-Cu matrix composites in a vacuum-suction-casting process
Contibutors: Sun, Anna (author) / He, Tao (author) / Huo, Yuanming (author) / Dong, Xingqian (author) / Wang, Jing (author)
Source: Materiali in tehnologije
Numbering: 2020, volume 54, iss. 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2737 kB)
1. TXT document (31 kB)
Determination of the cause of the formation of transverse internal cracks on a continuously cast ...
Contibutors: Franěk, Zdeněk (author) / Masarik, Miloš (author) / Šmíd, Jaromír (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (545 kB)
1. TXT document (29 kB)
Simulations of the shrinkage porosity of Al-Si-Cu automotive components
Contibutors: Lavtar, Lejla (author) / Petrič, Mitja (author) / Medved, Jože (author) / Taljat, Boštjan (author) / Mrvar, Primož (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (528 kB)
1. TXT document (11 kB)
Meritve temperaturnega polja na površini kontilitih slabov iz avstenitnega nerjavnega jekla
Contibutors: Kosmač, Alenka (author) / Kozjek, Toni (author) / Ilić, Semjon (author)
Source: Materiali in tehnologije
Numbering: 2000, volume 34, issue 3/4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (274 kB)
1. TXT document (10 kB)
Manufacturing of cast-metal sponges from copper alloys
Contibutors: Merta, Václav (author) / Lána, Ivo (author)
Source: Materiali in tehnologije
Numbering: 2020, volume 54, iss. 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (635 kB)
1. TXT document (11 kB)
Effect of cerium additions on the AlSi17 casting alloy
Contibutors: Kores, Stanislav (author) / Vončina, Maja (author) / Kosec, Borut (author) / Mrvar, Primož (author) / Medved, Jože (author)
Source: Materiali in tehnologije
Numbering: 2010, volume 44, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (622 kB)
1. TXT document (15 kB)
Influence of cooling mode in relation to casting and extrusion parameters on mechanical propertie...
Contibutors: Malej, Simon (author) / Terčelj, Milan (author) / Peruš, Iztok (author) / Kugler, Goran (author)
Source: RMZ-materials and geoenvironment
Numbering: 2017, volume 64, issue 1
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (670 kB)
1. TXT document (27 kB)
Research of thermal processes for the continuous casting of steel
Contibutors: Velicka, Marek (author) / Dittel, David (author) / Pyszko, René (author) / Příhoda, Miroslav (author) / Vaculik, Miroslav (author) / Fojtik, Pavel (author) / Burda, Jiri (author)
Source: Materiali in tehnologije
Numbering: 2013, volume 47, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (538 kB)
1. TXT document (16 kB)
Lasersko sintranje orodja za tlačno litje aluminija
Contibutors: Dolinšek, Slavko (author) / Panjan, Peter (author) / Syvanen, Tatu (author) / Ramovš, Jože (author)
Source: Strojniški vestnik
Numbering: 2006, volume 52, issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (770 kB)
1. TXT document (48 kB)
A meshless model of electromagnetic braking for the continuous casting of steel
Contibutors: Mramor, Katarina (author) / Vertnik, Robert (author) / Šarler, Božidar (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (4618 kB)
1. TXT document (27 kB)
Tretje posvetovanje o kontinuirnem vlivanju jekel z naslovom: "Continuos Casting Conference 1984 ...
Contibutors: Prešern, Vasilij (author) / Debelak, Martin (author)
Source: Železarski zbornik
Numbering: 1984, volume 18, issue 3
Provider: Narodna in univerzitetna knjižnica
1. PDF document (513 kB)
1. TXT document (14 kB)
Setting a numerical simulation of filling and solidification of heavy steel ingots based on real ...
Contibutors: Tkadlečková, Markéta (author) / Machovcak, Pavel (author) / Gryc, Karel (author) / Klus, Petr (author) / Michalek, Karel (author) / Socha, Ladislav (author) / Kovac, Marek (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (347 kB)
1. TXT document (16 kB)
Two numerical models of the solidification structure of massive ductile cast-iron casting
Contibutors: Stransky, Karel (author) / Dobrovská, Jana (author) / Kavička, František (author) / Gontarev, Vasilij (author) / Sekanina, Buhumil (author) / Stetina, Jozef (author)
Source: Materiali in tehnologije
Numbering: 2010, volume 44, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (890 kB)
1. TXT document (27 kB)
Erosion of mold-steel surface oxidation and nitriding layers due to a die-casting aluminum alloy
Contibutors: Cao, Han-xue (author) / Liu, Yun-hao (author) / Shen, Chao (author) / Tang, Hao-xing (author) / Huang, Yan-yan (author) / Lei, Jia-le (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1070 kB)
1. TXT document (27 kB)
Improvement of the casting of special steel with a wide solid-liquid interface
Contibutors: Mauder, Tomás (author) / Štětina, Josef (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1542 kB)
1. TXT document (15 kB)
Optimizacija procesnih parametrov pri kontinuiranem ulivanju jekla v železarni ACRONI Jesenice (1997, volume 31, issue 5)
Contibutors: Filipič, Bogdan (author) / Šarler, Božidar (author)
Source: Kovine zlitine tehnologije
Provider: Narodna in univerzitetna knjižnica
1. PDF document (1033 kB)
1. TXT document (25 kB)
Effects of processing parameters on the microstructure and mechanical properties of Al-Si-Cu allo...
Contibutors: Yu, Kuanping (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Pan, Tingting (author) / Dong, Xingqian (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2514 kB)
1. TXT document (35 kB)
Effect of a nano-ceramic mold coating on the fluidity length of thin-wall castings in Al4-1 alloy...
Contibutors: Borouni, Mansour (author) / Niroumand, Behzad (author) / Fathi, Mohammad Hosein (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (569 kB)
1. TXT document (22 kB)
Cast cellular metals with regular and irregular structures
Contibutors: Bednářová, Vlasta (author) / Lichý, Petr (author) / Elbel, Tomáš (author) / Hanus, Aleš (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (938 kB)
1. TXT document (20 kB)
Study of the microstructures and mechanical properties of aluminium hybrid composites with SiC an...
Contibutors: Pugalenthi, Palanisamy (author) / Jayaraman, Murugesan (author) / Subburam, Venkatajalapathy (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1889 kB)
1. TXT document (35 kB)
Continuous vertical casting of a NiTi alloy
Contibutors: Stambolić, Aleš (author) / Anžel, Ivan (author) / Lojen, Gorazd (author) / Kocijan, Aleksandra (author) / Jenko, Monika (author) / Rudolf, Rebeka (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (588 kB)
1. TXT document (35 kB)
Laser cladding in the use effects on nitrided and PVD coated steels used for die-casting using va...
Contibutors: Bombač, David (author) / Fazarinc, Matevž (author) / Pleterski, Matej (author) / Tušek, Janez (author) / Muhič, Tadej (author)
Source: RMZ-materials and geoenvironment
Numbering: 2009, volume 56, issue 3
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (1622 kB)
1. TXT document (22 kB)
Metal particles size influence on graded structure in composite Alsub2Osub3-Ni
Contibutors: Zygmuntowicz, Justyna (author) / Miazga, Aleksandra (author) / Konopka, Katarzyna (author) / Kaszuwara, Waldemar (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1102 kB)
1. TXT document (23 kB)
Use of precursors for the production of cast metallic foams
Contibutors: Kroupová, Ivana (author) / Lichý, Petr (author) / Merta, Václav (author) / Lána, Ivo (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (134 kB)
1. TXT document (13 kB)
Application of a control-measuring apparatus and Peltier modules in the bulk-metallic-glass produ...
Contibutors: Pilarczyk, Wirginia (author) / Pilarczyk, Adam (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1294 kB)
1. TXT document (19 kB)
Sistem za zajemanje, arhiviranje, spremljanje in analizo procesnih parametrov polkontinuiranega u... (1997, volume 31, issue 3/4)
Contibutors: Sabolič Mijovič, Mojca (author) / Šarler, Božidar (author)
Source: Kovine zlitine tehnologije
Provider: Narodna in univerzitetna knjižnica
1. PDF document (772 kB)
1. TXT document (14 kB)
Influence of different casting conditions and the filtering process on the electrical resistance ...
Contibutors: Poženel, Terezija (author) / Petrič, Mitja (author) / Bratuš, Vitoslav (author) / Vončina, Maja (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (845 kB)
1. TXT document (24 kB)
Analiza vpliva procesnih parametrov na kontinuirano ulivanje zlitine Al4.5CuPbBi
Contibutors: Sabolič Mijovič, Mojca (author) / Šarler, Božidar (author)
Source: Kovine zlitine tehnologije
Numbering: 1999, volume 33, issue 1/2
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (285 kB)
1. TXT document (19 kB)
Nenehno izboljševanje tlačnega litja s postopkom Šest sigem
Contibutors: Pavletić, Duško (author) / Soković, Mirko (author) / Maurović, Daniel (author)
Source: Strojniški vestnik
Numbering: 2007, volume 53, issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (471 kB)
1. TXT document (25 kB)
Analysis of twin-roll casting AA8079 alloy 6.35-mikrom foil rolling process
Contibutors: Can, Ahmet (author) / Arikan, Hüseyin (author) / Çinar, Kadir (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1642 kB)
1. TXT document (37 kB)
Optimization of the secondary cooling in a continuous casting process with different slab cross-s...
Contibutors: Mauder, Tomás (author) / Štětina, Josef (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (408 kB)
1. TXT document (17 kB)
Monitoring and simulation of the unsteady states in continuous casting
Contibutors: Pyszko, René (author) / Franěk, Zdeněk (author) / Příhoda, Miroslav (author) / Velicka, Marek (author) / Sikora, Kamil (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1814 kB)
1. TXT document (29 kB)
A fuzzy-based optimal control algorithm for a continuous casting process
Contibutors: Mauder, Tomas (author) / Sandera, Cenek (author) / Stetina, Jozef (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (220 kB)
1. TXT document (19 kB)
The quality of super-clean steels produced at ŽĎAS, inc.
Contibutors: Balcar, Martin (author) / Martínek, Ludvík (author) / Fila, Pavel (author) / Novák, Jaroslav (author) / Bažan, Jiří (author) / Socha, Ladislav (author) / Skobir Balantič, Danijela Anica (author) / Godec, Matjaž (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (886 kB)
1. TXT document (21 kB)
The bond strength of dental porcelain tocobalt-chromium alloys fabricated by casting,milling and ...
Contibutors: Antanasova, Maja (author) / Kocjan, Andraž (author) / Žužek, Borut (author) / Jovanovski, Sašo (author) / Jevnikar, Peter (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2278 kB)
1. TXT document (40 kB)
Afinacija kontinuirno vlitega cementacijskega jekla Č.4320 z niobijem in vanadijem. Del 1 : Preis...
Contibutors: Vodopivec, Franc (author) / Vizjak, Ferdo (author) / Senčič, Srečko (author) / Manojlović, Gojko (author) / Gnidovec, D. (author)
Source: Železarski zbornik
Numbering: 1981, volume 15, issue 3
Provider: Narodna in univerzitetna knjižnica
1. PDF document (1593 kB)
1. TXT document (31 kB)
Study of macro-segregations in a continuously cast billet
Contibutors: Socha, Ladislav (author) / Vodárek, Vlastimil (author) / Michalek, Karel (author) / Francová, Hana (author) / Gryc, Karel (author) / Tkadlečková, Markéta (author) / Válek, Ladislav (author)
Source: Materiali in tehnologije
Numbering: 2017, volume 51, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2204 kB)
1. TXT document (22 kB)
Model-based tuning of process parameters for steady-state steel casting
Contibutors: Filipič, Bogdan (author) / Laitinen, Erkki (author)
Source: Informatica (Ljubljana)
Numbering: 2005, volume 29, issue 4
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (196 kB)
1. TXT document (22 kB)
Wear behaviour of B4C reinforced hybrid aluminum-matrix composites
Contibutors: Thiyagarajan, Thirumalai (author) / Subramanian, Ramanathan (author) / Dharmalingam, Somasundaram (author) / Radika, Nachiappan (author) / Gowrisankar, Annadurai (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (2997 kB)
1. TXT document (22 kB)
Microstructure and formability development in Al strip casting for thin gauge foil production
Contibutors: Kevorkijan, Varužan (author)
Source: Materiali in tehnologije
Numbering: 2005, volume 39, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (332 kB)
1. TXT document (20 kB)
Automated fractal analysis of a network of thermal fatigue cracks
Contibutors: Maruščak, P. O. (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (273 kB)
1. TXT document (12 kB)
Influence of feldspar content in quartz sand on the properties of mould mixtures for moulds and c...
Contibutors: Krgović, Milun (author) / Vuksanović, Darko (author) / Blagojević, Nada Z. (author) / Zejak, Radomir (author)
Source: Materiali in tehnologije
Numbering: 2004, volume 38, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (503 kB)
1. TXT document (14 kB)
Učinkovitost serijskega mavčenja, uporabe botulinskega toksina in korekcijskih ortoz za gleženj i...
Contibutors: Jemec, Irena (author) / Groleger, Katja (author) / Božič, Marta (author)
Source: Rehabilitacija (Ljubljana)
Numbering: 2013, volume 12, issue 1
Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)
1. PDF document (223 kB)
1. TXT document (45 kB)
Vpliv serijskega mavčenja na integriteto kože
Contibutors: Ovca, Andreja (author)
Source: Rehabilitacija (Ljubljana)
Numbering: 2014, volume 13, issue 3
Provider: Univerzitetni rehabilitacijski inštitut RS – Soča
(Obvezni izvod spletne publikacije)
1. PDF document (387 kB)
1. TXT document (23 kB)
Nanotehnologija v postopkih precizijskega litja plemenitih zlitin
Contibutors: Rudolf, Rebeka (author) / Majerič, Peter (author) / Ferčec, Urban (author)
Source: Anali PAZU
Numbering: 2018, volume 8, issue 1/2
Provider: Združenje Pomurska akademsko znanstvena unija
(Obvezni izvod spletne publikacije)
1. PDF document (1367 kB)
1. TXT document (28 kB)
Reduction of surface defects by optimization of casting speed using genetic programming
Contibutors: Kovačič, Miha (author) / Župerl, Uroš (author) / Gusel, Leo (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2023, volume 18, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1139 kB)
1. TXT document (44 kB)
Kontinuirno litje nikljevih superzlitin v vakuumu
Contibutors: Zupanič, Franc (author)
Source: Vakuumist
Numbering: 2009, volume 29, issue 1/2
Provider: Društvo za vakuumsko tehniko Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (319 kB)
1. TXT document (32 kB)
Experimental preparation of short-carbon-fiber-reinforced Al-5Cu matrix composites using vacuum s...
Contibutors: Dong, Xingqian (author) / He, Tao (author) / Huo, Yuanming (author) / Sun, Anna (author)
Source: Materiali in tehnologije
Numbering: 2020, volume 54, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1261 kB)
1. TXT document (30 kB)
Cement thickness of post and cores fabricated by modern digital technology
Contibutors: Kanduti, Domen (author) / Kopač, Igor (author)
Source: Materiali in tehnologije
Numbering: 2021, volume 55, iss. 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1397 kB)
1. TXT document (24 kB)
Vplivi na beton med vgrajevanjem
Contibutors: Glavinič, Marko (author) / Štrukelj, Andrej (author)
Source: Gradbeni vestnik
Numbering: 2016, letn. 65
Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (4849 kB)
1. TXT document (28 kB)
Analysis of die casting tool material
Contibutors: Muhič, Mitja (author) / Tušek, Janez (author) / Kosel, Franc (author) / Klobčar, Damjan (author)
Source: Strojniški vestnik
Numbering: 2010, volume 56, issue 6
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (857 kB)
1. TXT document (18 kB)
Characterization of the bonding zone in AZ91/AlSi12 bimetals fabricated by liquid-solid compound ...
Contibutors: Mola, Renata (author) / Bucki, Tomasz (author)
Source: Strojniški vestnik
Numbering: 2020, volume 66, issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (7897 kB)
1. TXT document (37 kB)
Realization, property and rights 2026 Narodna in univerzitetna knjižnica, Turjaška 1, 1000 Ljubljana