dLib.si - tehnika

1. PDF document (4786 kB)

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (31 kB)

Numerical simulation of stress relieving of an austenite stainless steel

Contibutors: Urevc, Janez (author) / Koc, Pino (author) / Štok, Boris (author)

1. PDF document (1108 kB)

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (31 kB)

Homodyne quadrature laser interferometer applied for the studies of optodynamic wave propagation ...

Contibutors: Požar, Tomaž (author) / Možina, Janez (author)

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (621 kB)

Test and parameters design of a novel reinforced cymene-oil isolator for reinforcement scheme of ...

Contibutors: Yang, Ping (author) / Liu, Young (author) / Liu, Fuyun (author)

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (841 kB)

Uniform power transmission gears

Contibutors: Hlebanja, Gorazd (author) / Hlebanja, Jože (author)

1. PDF document (1508 kB)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (37 kB)

Visual control of an industrial robot manipulator

Contibutors: Papa, Gregor (author) / Torkar, Drago (author)

1. PDF document (1382 kB)

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (16 kB)

Dynamic equipment deployment at a container terminal

Contibutors: Kyu Park, Nam (author) / Dragović, Branislav (author) / Kim, Ju Young (author)

1. PDF document (1491 kB)

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (38 kB)

The effects of blade angle on blade stresses during cutting of different kinds of paper materials

Contibutors: Kurt, Abdullah (author) / Kose, Erdogan (author) / Sahinbaskan, Turkun (author)

Effects of couple stresses on the unsteady performance of finite lubricated bearings

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (654 kB)

1. TXT document (26 kB)

Contibutors: Senatore, Adolfo (author) / Ruggiero, Alessandro (author) / Jevremović, Vladeta (author) / Nedeff, Valentin (author)

Measurement uncertainty in calibration of measurement surface plates flatness

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (282 kB)

1. TXT document (21 kB)

Contibutors: Gusel, Andrej (author) / Ačko, Bojan (author) / Mudronja, Vedran (author)

Enhancing gesture dictionary of a commercial data glove using complex static gestures and an MLP ...

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (345 kB)

1. TXT document (21 kB)

Contibutors: Lužanin, Ognjan (author) / Plančak, Miroslav (author)

Numbering: 2009, volume 55, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (433 kB)

Particularities of an incremental forming application in multi-layer construction elements

Contibutors: Petek, Aleš (author) / Zaletelj, Viktor (author) / Kuzman, Karl (author)

1. PDF document (1146 kB)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (15 kB)

Properties of thermally treated CuZn27Al3 shape memory alloy

Contibutors: Čorić, Danko (author) / Franz, Mladen (author)

1. PDF document (2611 kB)

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Application of artificial neural network for modeling the flash land dimensions in the forging dies

Contibutors: Marinković, Velibor (author)

Optimization of the unloading bridge working cycle

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (570 kB)

1. TXT document (42 kB)

Contibutors: Bugaric, Ugljesa (author) / Vukovic, Josif (author) / Petrovic, Dusan (author) / Jeli, Zorana (author) / Petrovic, Zoran (author)

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (350 kB)

Reward level evaluation of parallel sytems

Contibutors: Vasov, Ljubiša (author) / Stojiljković, Branimir (author) / Mitrović, Časlav (author)

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (237 kB)

Mathematical modeling and experimental verification of operating parameters of vane pump with dou...

Contibutors: Petrović, Radovan S. (author)

1. PDF document (1853 kB)

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Intelligent interfacing module of process capability among product and process development system...

Contibutors: Bargelis, Algirdas (author) / Kuosmanen, Petri (author) / Stasiškis, Andrius (author)

Analysis of product development on large-scale production with multi-criteria approach

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (253 kB)

1. TXT document (30 kB)

Contibutors: Kostanjevec, Tomaž (author) / Balič, Jože (author) / Rajh, Matej (author)

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (736 kB)

Functional and information modeling of production using IDEF methods

Contibutors: Šerifi, Veis (author) / Dašić, Predrag (author) / Ječmenica, Ratomir (author) / Labović, Dragana (author)

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (438 kB)

The integrating role of simulation in modern manufacturing planning and scheduling

Contibutors: Arsovski, Slavko (author) / Arsovski, Zora (author) / Mirovic, Zoran (author)

Improvement of the statical behaviour of pressure controlled axial piston pumps

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (450 kB)

1. TXT document (40 kB)

Contibutors: Lovrec, Darko (author) / Detiček, Edvard (author)

An investigation of the number of inserts effect on the machining time and metal removal rate dur...

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (999 kB)

1. TXT document (26 kB)

Contibutors: Dilipak, Hakan (author) / Güldaş, Abdulmecit (author) / Gezgin, Akin (author)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (366 kB)

High pressure cooling in the machining of hard-to-machine materials

Contibutors: Kramar, Davorin (author) / Kopač, Janez (author)

1. PDF document (1299 kB)

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Using balanced scorecard to improve environmental management system

Contibutors: Krivokapić, Zdravko (author) / Jovanović, Jelena (author)

Risk assessment and managing technical systems in case of mining industry

Numbering: 2009, volume 55, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (257 kB)

1. TXT document (32 kB)

Contibutors: Radosavljević, Slobodan (author) / Lilić, Nikola (author) / Ćurčić, Srećko (author) / Radosavljević, Milan (author)

Experimental investigations and modeling of the rubber-asphalt sliding pair dynamics

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (939 kB)

1. TXT document (41 kB)

Contibutors: Božić, Ante (author) / Petrović, Ivan (author) / Matuško, Jadranko (author)

Internet based teleoperation for cooperative navigation and manipulation

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (864 kB)

1. TXT document (44 kB)

Contibutors: Petrović, Ivan (author) / Kolonić, Fetah (author) / Korondi, Péter (author)

1. PDF document (1444 kB)

Numbering: 2009, volume 55, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (43 kB)

Emergent synthesis based multi-objective design of the manufacturing system shop-floor

Contibutors: Car, Zlatan (author) / Barišić, Branimir (author) / Rucki, Miroslaw (author)

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (642 kB)

The influence of some parameters on the flow properties of bulk solids

Contibutors: Hann, Damjan (author)

1. PDF document (1026 kB)

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (18 kB)

A company's readiness for concurrent product and process development

Contibutors: Žargi, Urban (author) / Kušar, Janez (author) / Berlec, Tomaž (author) / Starbek, Marko (author)

The issue of Strouhal number definition in cavitating flow

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (932 kB)

1. TXT document (24 kB)

Contibutors: Dular, Matevž (author) / Bachert, Rudolf (author)

Variation of normal anisotropy ratio "r" during plastic forming

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (748 kB)

1. TXT document (32 kB)

Contibutors: Aleksandrović, Srbislav (author) / Stefanović, Milentije (author) / Adamović, Dragan (author) / Lazić, Vukić (author)

Numbering: 2009, volume 55, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (724 kB)

Diamond tools for machining of granite and their wear

Contibutors: Kenda, Jani (author) / Kopač, Janez (author)

Basic quality tools in continuous improvement process

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (957 kB)

1. TXT document (16 kB)

Contibutors: Soković, Mirko (author) / Jovanović, Jelena (author) / Krivokapić, Zdravko (author) / Vujović, Aleksandar (author)

Numbering: 2009, volume 5, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (804 kB)

Boundary layer of dissociated gas on bodies of revolution of a porous contour

Contibutors: Obrović, Branko (author) / Nikodijević, Dragiša (author) / Savić, Slobodan (author)

Research on the influence of the cutting speed on the specific cutting force during turning

Numbering: 2009, volume 55, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (407 kB)

1. TXT document (29 kB)

Contibutors: Velchev, Stefan (author) / Kolev, Ivan (author) / Ivanov, Krassimir (author)

Performance analysis of the reheat-stop-valve mechanism under dimensional tolerance, misalignment...

Numbering: 2009, volume 55, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (524 kB)

1. TXT document (17 kB)

Contibutors: Dong, Xu (author) / Ye, Jin (author)

Translation of extended Petri net model into ladder diagram and simulation with PLC

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (830 kB)

1. TXT document (37 kB)

Contibutors: Perme, Tomaž (author)

1. PDF document (1020 kB)

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (51 kB)

Spatial-mode-shape-identification using a continuous wavelet transform

Contibutors: Česnik, Martin (author) / Slavič, Janko (author) / Boltežar, Miha (author)

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (838 kB)

A model of surface roughness constitution in the metal cutting process applying tools with define...

Contibutors: Adamczak, Stanisĺaw (author) / Miko, Edward (author) / Čuš, Franc (author)

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (474 kB)

Some statistical aspects of firecracker noise

Contibutors: Deželak, Ferdinand (author) / Prezelj, Jurij (author) / Čudina, Mirko (author)

Condition monitoring of milling tool wear based on fractal dimension of vibration signals

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (825 kB)

1. TXT document (43 kB)

Contibutors: Xu, Chuangwen (author) / Chen, Hualing (author) / Liu, Zhe (author) / Cheng, Zhongwen (author)

Availability management of complex technical systems

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (341 kB)

1. TXT document (33 kB)

Contibutors: Vidojević, Dejan (author) / Jeremić, Branislav (author) / Babić, Miroslav (author)

1. PDF document (1754 kB)

Numbering: 2009, volume 55, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (36 kB)

Numerical simulation of crack modeling using extended finite element method

Contibutors: Jovičić, Gordana (author) / Živković, Miroslav (author) / Jovičić, Nebojša (author)

The application of the root locus method for the design of pitch controller of an F-104A aircraft

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (474 kB)

1. TXT document (18 kB)

Contibutors: Stojiljković, Branimir (author) / Vasov, Ljubiša (author) / Mitrović, Časlav (author) / Cvetković, Dragan (author)

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (373 kB)

Determination of pressure losses in hydraulic pipeline systems by considering temperature and pre...

Contibutors: Savić, Vladimir (author) / Knežević, Darko (author) / Lovrec, Darko (author) / Jocanović, Mitar (author) / Karanović, Velibor (author)

Numbering: 2009, volume 55, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (398 kB)

1. TXT document (20 kB)

STEP-NC

Contibutors: Kržič, Primož (author) / Stoić, Antun (author) / Kopač, Janez (author)

1. PDF document (1952 kB)

Numbering: 2009, volume 55, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (30 kB)

Morphological-functional aspects of electro-discharge machined surface textures

Contibutors: Petropoulos, G. (author) / Vaxevanidis, N.M. (author) / Radovanović, Miroslav (author) / Zoler, Carol (author)

Mathematical modeling and experimental research of characteristic parameters hydrodynamic process...

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (601 kB)

1. TXT document (30 kB)

Contibutors: Petrović, Radovan S. (author)

Application of optimization techniques to determine parameters of the Vibe combustion model

Numbering: 2009, volume 55, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (839 kB)

1. TXT document (17 kB)

Contibutors: Prah, Ivo (author) / Katrašnik, Tomaž (author)

Quantification of flow kinematics using computer-aided visualization

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (392 kB)

1. TXT document (36 kB)

Contibutors: Bajcar, Tom (author) / Širok, Brane (author) / Eberlinc, Matjaž (author)

1. PDF document (1088 kB)

Numbering: 2009, volume 55, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (29 kB)

Magnetic cooling - development of magnetic refrigerator

Contibutors: Tušek, Jaka (author) / Zupan, Samo (author) / Prebil, Ivan (author) / Poredoš, Alojz (author)

1. PDF document (1657 kB)

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (32 kB)

Theory and application of naturally curved and twisted beams with closed thin-walled cross sections

Contibutors: Yu, Aimin (author) / Yang, Rongqiang (author) / Hao, Ying (author)

Qaulity! audits of management systems

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (561 kB)

1. TXT document (24 kB)

Contibutors: Maglić, Leon (author) / Kondić, Živko (author) / Kljajin, Milan (author)

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (755 kB)

Model-based investigation of flight qualities

Contibutors: Tomažič, Tine (author) / Matko, Drago (author)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (674 kB)

Modular design and its application to overhead traveling crane

Contibutors: Huang, Hong-Zhong (author) / Li, Yanfeng (author) / Wang, Zhonglai (author) / Xue, Li-Hua (author) / Wang, Young-Fu (author)

Dynamic response of mobile elevating work platform under wind excitation

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (553 kB)

1. TXT document (71 kB)

Contibutors: Bošnjak, Srđan (author) / Zrnić, Nenad Đ. (author) / Dragović, Branislav (author)

1. PDF document (1467 kB)

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (27 kB)

Modelling and analysis of thermal and stress loads in train disc brakes - braking from 250 km/h t...

Contibutors: Reibenschuh, Marko (author) / Oder, Grega (author) / Čuš, Franc (author) / Potrč, Iztok (author)

1. PDF document (3440 kB)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Integration framework to support cooperation in product development process

Contibutors: Hren, Gorazd (author) / Jezernik, Anton (author) / Lukšič, Stanislav (author) / Predin, Andrej (author)

Numbering: 2009, volume 55, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (575 kB)

An analytical solution of the Navier-Stokes equation for flow over a moving plate bounded by two ...

Contibutors: Erdogan, M. Emin (author) / Imrak, Cevat Erdem (author)

Phenomenological sedimentation model for an industrial circular settling tank

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (484 kB)

1. TXT document (15 kB)

Contibutors: Gosar, Leon (author) / Steinman, Franci (author) / Širok, Brane (author) / Bajcar, Tom (author)

Function and functionality in the conceptual design process

Numbering: 2009, volume 55, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (650 kB)

1. TXT document (27 kB)

Contibutors: Zadnik, Žiga (author) / Karakašić, Mirko (author) / Kljajin, Milan (author) / Duhovnik, Jože (author)

1. PDF document (1794 kB)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (57 kB)

Automatic detection of spring faults during assembly of reciprocating compressors

Contibutors: Potočnik, Primož (author) / Soklič, Dejan (author) / Mužič, Peter (author) / Absec, Matija (author) / Strmec, Tomaž (author) / Govekar, Edvard (author)

1. PDF document (1225 kB)

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

The influence of hardening related deformations on selection of abrasion inhibition process

Contibutors: Marušić, Vlatko (author) / Šarčević, Željko (author) / Rozing, Goran (author)

1. PDF document (2441 kB)

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (14 kB)

A novel pelton turbine model for water hammer analysis

Contibutors: Karadžić, Uroš (author) / Bergant, Anton (author) / Vukoslavčević, Petar (author)

1. PDF document (2872 kB)

Numbering: 2009, volume 55, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Cylindrical wormgearings with progressively curved shape of teeth flanks

Contibutors: Hlebanja, Gorazd (author) / Hlebanja, Jože (author) / Čarman, Miroslav (author)

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (920 kB)

Application of 'data envelopment analysis' in ecological research of maintenance of forestry mech...

Contibutors: Šporčić, Mario (author) / Martinić, Ivan (author) / Šegotić, Ksenija (author)

A reverse engineering technique for creating virtual robots

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (242 kB)

1. TXT document (38 kB)

Contibutors: Brezovnik, Simon (author) / Brezočnik, Miran (author) / Klančnik, Simon (author) / Pahole, Ivo (author) / Gotlih, Karl (author)

Numbering: 2009, volume 55, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (789 kB)

An approach to the optimization of a thin-walled Z-beam

Contibutors: Anđelić, Nina (author) / Milošević Mitić, Vesna (author) / Maneski, Taško (author)

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (303 kB)