Number of hits: 96
Source type
journals (96)
Journals - titles
Acta geographica Slovenica (1)
Advances in production engineering and management (7)
Anali PAZU (1)
Geodetski vestnik (1)
Geologija (2)
Kovine zlitine tehnologije (1)
Les (Ljubljana) (1)
Materiali in tehnologije (39)
RMZ-materials and geoenvironment (1)
Strojniški vestnik (40)
Ventil (Ljubljana) (2)
Journals - form
articles (95)
journals (1)
Language
english (89)
slovenian (9)
Date
1997 (1)
1999 (1)
2001 (1)
2003 (2)
2008 (4)
2009 (1)
2010 (4)
2011 (2)
2012 (6)
2013 (6)
2014 (6)
2015 (6)
2016 (9)
2017 (6)
2018 (6)
2019 (9)
2020 (5)
2021 (4)
2022 (2)
2023 (6)
2024 (8)
2025 (1)
Location
Geološki zavod Slovenije (2)
Inštitut za kovinske materiale in tehnologije (39)
Narodna in univerzitetna knjižnica (1)
Univerza v Ljubljani, Fakulteta za strojništvo (42)
Univerza v Ljubljani, Naravoslovnotehniška fakulteta (1)
Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (7)
Združenje Pomurska akademsko znanstvena unija (1)
ZRC SAZU (1)
Zveza geodetov Slovenije (1)
Zveza lesarjev Slovenije (1)
Content
Astronomy, Astrophysics (1)
Chemical Engineering (12)
Computer Science (2)
Construction (3)
Cybernetics (1)
Engineering and Technology (71)
Geography (1)
Geology (3)
Industry, Craft, Handicraft (3)
Medicine (1)
Physics (2)
Urbanism (1)
Publisher
Association of Mechanical Engineers and Technicians of Slovenia et al. (16)
Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (7)
Geološki zavod Slovenije (2)
Inštitut za kovinske materiale in tehnologije (40)
Inštitut za rudarstvo, geotehnologijo in okolje (1)
Naravoslovnotehniška fakulteta (1)
Slovenska akademija znanosti in umetnosti (1)
Univerza v Ljubljani, Fakulteta za strojništvo (2)
Univerzitetna založba Univerze v Mariboru (1)
Založba ZRC (1)
Zveza društev inženirjev in tehnikov gozdarstva in lesarstva Slovenije (1)
Zveza geodetov Slovenije (1)
Zveza strojnih inženirjev in tehnikov Slovenije et al. (17)
Zveza strojnih inženirjev in tehnikov Slovenije etc. (23)
Železarna Jesenice (1)
Železarna Ravne (1)
Železarna Štore (1)
Rights
CC BY – Attribution (3)
CC BY-NC - Attribution, Non-Commercial (1)
CC BY-NC-ND - Attribution, Non-Commercial, No Derivatives (2)
In Copyright (90)
Access
Public (96)odstrani
Search in (96)
Sort by:
Use of artificial neural networks in ball burnishing process for the prediction of surface roughn...
Contibutors: Esme, Ugur (author) / Sagbas, Aysun (author) / Kahraman, Funda (author) / Kulekci, Mustafa Kemal (author)
Source: Materiali in tehnologije
Numbering: 2008, volume 42, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (237 kB)
1. TXT document (19 kB)
Examination and modelling of the influence of cutting parameters on the cutting force and the sur...
Contibutors: Bajić, Dražen (author) / Lela, Branimir (author) / Cukor, Goran (author)
Source: Strojniški vestnik
Numbering: 2008, volume 54, issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (1643 kB)
1. TXT document (37 kB)
Vpliv lesne vrste na hrapavost zunanjega sloja in prostorninsko maso brušenih ivernih plošč
Contibutors: Medved, Sergej (author)
Source: Les (Ljubljana)
Numbering: 1999, volume 51, issue 5
Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (300 kB)
1. TXT document (19 kB)
Prediction of surface roughness in the ball-end milling process using response surface methodolog...
Contibutors: Sekulić, Milenko (author) / Pejić, Vlastimir (author) / Brezočnik, Miran (author) / Gostimirović, Marin (author) / Hadžistević, Miodrag (author)
Source: Advances in production engineering and management
Numbering: 2018, volume 13, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (818 kB)
1. TXT document (44 kB)
Experimental examination of main cutting force and surface roughness depending on cutting parameters
Contibutors: Korkut, Ihsan (author) / Boy, Mehmet (author)
Source: Strojniški vestnik
Numbering: 2008, volume 54, issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (146 kB)
1. TXT document (21 kB)
The coating of a NiTi alloy has a greater impact on the mechanical properties than the acidity of...
Contibutors: Pop Acev, Darko (author) / Katic, Visnja (author) / Turco, Gianluca (author) / Contardo, Luca (author) / Spalj, Stjepan (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (268 kB)
1. TXT document (25 kB)
Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy u...
Contibutors: Tolga Ozkan, Murat (author) / Ulas, Hasan Basri (author) / Bilgin, Musa (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (517 kB)
1. TXT document (38 kB)
Lacunarity properties of nanophotonic materials based on poly(methyl methacrylate) for contact le...
Contibutors: Tomić, Marija (author) / Bojović, Božica (author) / Stamenković, Dragomir (author) / Mileusnić, Ivana (author) / Koruga, Djuro (author)
Source: Materiali in tehnologije
Numbering: 2017, volume 51, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1052 kB)
1. TXT document (35 kB)
Analysis of the cutting temperature and surface roughness during the orthogonal machining of AISI...
Contibutors: Motorcu, Ali Riza (author) / Isik, Yahya (author) / Kus, Abdil (author) / Cakir, Mustafa Cemal (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (821 kB)
1. TXT document (40 kB)
A review of the surface modifications of titanium alloys for biomedical applications
Contibutors: Manjaiah, Mallaiah (author) / Laubscher, R. F. (author)
Source: Materiali in tehnologije
Numbering: 2017, volume 51, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1360 kB)
1. TXT document (71 kB)
Multiple regression modeling and prediction of the surface roughness in the WEDM process
Contibutors: Kulekci, Mustafa Kemal (author) / Akkurt, Adnan (author) / Esme, Ugur (author) / Ozkul, Iskender (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (308 kB)
1. TXT document (23 kB)
Optimising the effect of cutting parameters on the average surface roughness in a turning process...
Contibutors: Akkuş, Harun (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (287 kB)
1. TXT document (22 kB)
Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...
Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (880 kB)
1. TXT document (31 kB)
Analysis of surface roughness in the Sveta Magdalena paleo-landslide in the Rebrnice area
Contibutors: Popit, Tomislav (author) / Verbovšek, Timotej (author)
Source: RMZ-materials and geoenvironment
Numbering: 2013, volume 60, issue 3
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (5010 kB)
1. TXT document (25 kB)
Application of the Taguchi method to select the optimum cutting parameters for tangential cylindr...
Contibutors: Ozay, Cetin (author) / Ballikaya, Hasan (author) / Savas, Vedat (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (812 kB)
1. TXT document (34 kB)
Machinability of a Ti-6Al-4V alloy with cryogenically treated cemented carbide tools
Contibutors: Mavi, Ahmet (author) / Korkut, Ihsan (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (899 kB)
1. TXT document (16 kB)
Application of a Taguchi-based neural network for forecasting and optimization of the surface rou...
Contibutors: Kazancoglu, Yugut (author) / Esme, Ugur (author) / Kulekci, Mustafa Kemal (author) / Kahraman, Funda (author) / Samur, Ramazan (author) / Akkurt, Adnan (author) / Ipekci, Melih Turan (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (273 kB)
1. TXT document (24 kB)
Surface roughness assessing based on digital image features
Contibutors: Šimunović, Goran (author) / Svalina, I. (author) / Simunovic, K. (author) / Šarić, Tomislav (author) / Havrlisan, S. (author) / Vukelić, Djordje (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1425 kB)
1. TXT document (41 kB)
Optimization of the surface roughness by applying the Taguchi technique for the turning of stainl...
Contibutors: Sarikaya, Murat (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1093 kB)
1. TXT document (38 kB)
Determination of nano-roughness for micro-objects by measuring the van der Waals force
Contibutors: Bratina, Božidar (author) / Šafarič, Jakob (author) / Uran, Suzana (author) / Šafarič, Riko (author)
Source: Advances in production engineering and management
Numbering: 2019, volume 14, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1635 kB)
1. TXT document (43 kB)
Experimental investigation of the microhardness and surface roughness of a pressure-die-casted A4...
Contibutors: Raghunayagan, Parameswaran (author) / Murugarajan, Angamuthu (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (3036 kB)
1. TXT document (29 kB)
Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...
Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)
Source: Materiali in tehnologije
Numbering: 2017, volume 51, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1238 kB)
1. TXT document (37 kB)
Effects of various helically angled grinding wheels on the surface roughness and roundness in gri...
Contibutors: Gavas, Muammer (author) / Kina, Muammer (author) / Köklü, Ugur (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1176 kB)
1. TXT document (24 kB)
Investigation of the cutting forces and surface roughness in milling carbon-fiber-reinforced poly...
Contibutors: Bayraktar, Senol (author) / Turgut, Yakup (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1131 kB)
1. TXT document (47 kB)
Effect of cryogenic treatment applied to M42 HSS drills on the machinability of Ti-6Al-4V alloy
Contibutors: Kivak, Turgay (author) / Seker, Ulvi (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1348 kB)
1. TXT document (41 kB)
The influence of the surface roughness on the drawing parameters of aluminum-alloy auto-body sheets
Contibutors: Delijić, Kemal (author) / Mišović, Mitar (author)
Source: Materiali in tehnologije
Numbering: 2001, volume 35, issue 1/2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (231 kB)
1. TXT document (14 kB)
Minimization of the surface roughness and form error on the milling of free-form surfaces using a...
Contibutors: Kurt, Mustafa (author) / Hartomacioglu, Selim (author) / Mutlu, Bilçen (author) / Köklü, Ugur (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (970 kB)
1. TXT document (31 kB)
FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...
Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1870 kB)
1. TXT document (37 kB)
Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...
Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)
Source: Advances in production engineering and management
Numbering: 2015, volume 10, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (943 kB)
1. TXT document (47 kB)
Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the GRA-Ta...
Contibutors: Kolli, Murahari (author) / Adepu, Kumar (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (730 kB)
1. TXT document (48 kB)
A model of surface roughness constitution in the metal cutting process applying tools with define...
Contibutors: Adamczak, Stanisĺaw (author) / Miko, Edward (author) / Čuš, Franc (author)
Source: Strojniški vestnik
Numbering: 2009, volume 55, issue 1
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (474 kB)
1. TXT document (28 kB)
The effects of cutting speed and feed rate on Bue-Bul formation, cutting forces and surface rough...
Contibutors: Gokkaya, Hasan (author) / Taskesen, Ahmet (author)
Source: Strojniški vestnik
Numbering: 2008, volume 54, issue 7/8
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (1124 kB)
1. TXT document (27 kB)
A cost-effective approach to the rapid fabrication of functional metal prototypes
Contibutors: Kuo, Chil-Chyuan (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (251 kB)
1. TXT document (22 kB)
Influence of the process parameters and the mechanical properties of aluminum alloys on the burr ...
Contibutors: Köglü, Ugur (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (186 kB)
1. TXT document (25 kB)
Machining parameters influencing in electro chemical machining on AA6061 MMC
Contibutors: Chentil Jegan, Thankaraj Mariapushpam (author) / Ravindran, Durairaj (author) / Dev Anand, M. (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (614 kB)
1. TXT document (44 kB)
Use of Grey based Taguchi method in ball burnishing process for the optimization of surface rough...
Contibutors: Esme, Ugur (author)
Source: Materiali in tehnologije
Numbering: 2010, volume 44, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (408 kB)
1. TXT document (27 kB)
Optimization of multi-process parameters according to the surface quality criteria in the end mil...
Contibutors: Durmuş, Hülya (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (498 kB)
1. TXT document (26 kB)
Evaluation of the surface roughness and geometric accuracies in a drilling process using the Tagu...
Contibutors: Kabakli, Evren (author) / Bayramoglu, Melih (author) / Geren, Necdet (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (239 kB)
1. TXT document (35 kB)
Vpliv mikrostrukture aluminijevih zlitin s silicijem na hrapavost površine po finem struženju (1997, volume 31, issue 5)
Contibutors: Grum, Janez (author)
Source: Kovine zlitine tehnologije
Provider: Narodna in univerzitetna knjižnica
1. PDF document (1446 kB)
1. TXT document (28 kB)
Optimization of the process parameters for surface roughness and tool life in face milling using ...
Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)
Source: Materiali in tehnologije
Numbering: 2015, volume 49, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (902 kB)
1. TXT document (39 kB)
Optimization of surface roughness in finish milling of AISI P20+S plastic-mold steel
Contibutors: Kara, Fuat (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (679 kB)
1. TXT document (28 kB)
Artificial neural network modeling for surface roughness prediction in cylindrical grinding of Al...
Contibutors: Chandrasekaran, Margam (author) / Devarasiddappa, D. (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (969 kB)
1. TXT document (36 kB)
Investigation of hole profiles in deep micro-hole drilling of AISI 420 stainless steel using powd...
Contibutors: Yilmaz, Volkan (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1021 kB)
1. TXT document (42 kB)
Using MANOVA to investigate the machining performance of Al2O3 + TiC insert during the turning of...
Contibutors: Paengchit, Phacharadit (author) / Saikaew, Charnnarong (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1078 kB)
1. TXT document (32 kB)
Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...
Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)
Source: Materiali in tehnologije
Numbering: 2019, volume 53, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1860 kB)
1. TXT document (37 kB)
Izbrani vidiki celovitosti površine aluminijeve zlitine pri običajni in obdelavi z velikimi hitro...
Contibutors: Vaněček, David (author) / Mádl, Jan (author) / Soković, Mirko (author)
Source: Strojniški vestnik
Numbering: 2003, volume 49, issue 2
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (225 kB)
1. TXT document (23 kB)
Uporaba napredne 3D-merilne naprave v tehniki
Contibutors: Grguraš, Damir (author) / Čerče, Luka (author) / Kramar, Davorin (author) / Pušavec, Franci (author)
Source: Ventil (Ljubljana)
Numbering: 2017, volume 23, issue 4
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1595 kB)
1. TXT document (22 kB)
Surface roughness and land use in Slovenia
Contibutors: Hrvatin, Mauro (author, cartographer) / Perko, Drago (author, cartographer)
Source: Acta geographica Slovenica
Numbering: 2003, volume 43, issue 2
Provider: ZRC SAZU
(Obvezni izvod spletne publikacije)
1. PDF document (2345 kB)
1. TXT document (139 kB)
Determining the surface roughness coefficient by 3D scanner
Contibutors: Fifer Bizjak, Karmen (author)
Source: Geologija
Numbering: 2010, volume 53, issue 2
Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (898 kB)
1. TXT document (19 kB)
Quantified joint surface description and joint shear strength of small rock samples
Contibutors: Fifer Bizjak, Karmen (author) / Geršak, Andraž (author)
Source: Geologija
Numbering: 2018, volume 61, issue 1
Provider: Geološki zavod Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (1111 kB)
1. TXT document (31 kB)
Realization, property and rights 2026 Narodna in univerzitetna knjižnica, Turjaška 1, 1000 Ljubljana