dLib.si - search results

Modification of non-metallic inclusions with rare-earth metals in 50CrMoV13-1 steel

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

1. TXT document (33 kB)

Contibutors: Šuler, Blaž (author) / Burja, Jaka (author) / Medved, Jože (author)

1. PDF document (1783 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidi...

Contibutors: Yi, Xiaojie (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Xu, Yajun (author) / Mahamane Sani, Abdou Yahouza (author)

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Research on the quality of the welded joint of aluminium alloy sheet AA6082-T6 using FSW, MIG and...

Contibutors: Šibalić, Nikola (author) / Vukčević, Milan M. (author)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (979 kB)

Effect of stop-hole-induced material removal on the fatigue properties of cracked DT4C steel

Contibutors: Zhang, Chunguo (author) / Liu, Rongwei (author) / Liu, Qiankun (author) / Ren, Cuiping (author)

1. PDF document (2330 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of subzero treatments on the mechanical properties of the SAE 4140 steel

Contibutors: Sahin, Ismail (author) / Höke, Gürhan (author) / Cinici, Hanifi (author) / Findik, Tayfun (author) / Koralay, Haluk (author) / Arabaci, Ugur (author)

Polymer-matrix-bonded polyester fibers as a substitute for materials used for the cores of vacuum...

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

1. TXT document (30 kB)

Contibutors: Zach, Jiří (author) / Novák, Vítězslav (author)

Effect of ZrOsub2 additions on fabrication of ZrOsub2/Mg composites via friction-stir processing

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (349 kB)

1. TXT document (17 kB)

Contibutors: Chen, Hongmei (author) / Li, Xiaowen (author) / Liao, Si'en (author) / Zhang, Jing (author) / Jin, Yunxue (author) / Cui, Hongwei (author)

1. PDF document (1536 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Isothermal oxidation behavior of electrospark deposited NiCrAlY coatings on a Ni-based single-cry...

Contibutors: Guo, Cean (author) / Liang, Ting (author) / Lu, Fengsheng (author) / Liang, Zhengang (author) / Zhao, Shuang (author) / Zhang, Jian (author)

1. PDF document (1642 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of heat inputs on the structure of Ni-based amorphous composite coatings applied with las...

Contibutors: Li, Ruifeng (author) / Chen, Zhaohui (author) / Gu, Jiayang (author) / Wang, Yuxin (author) / Wu, Mingfang (author) / Tian, Yingtao (author)

1. PDF document (1624 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of an electromagnetic field on the microstructure and properties of Cr(Ti)AlN hard coating...

Contibutors: Wang, Jin (author) / Ma, Dayan (author) / Liu, Qi (author) / Jin, Yetang (author) / Wang, Xu (author)

1. PDF document (1675 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Piercing behavior of an in-situ Csubf/Asub2osub3 composite in waterjet machining

Contibutors: Ren, Jie (author) / Qiao, Xu (author)

1. PDF document (3251 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Dimensional errors in selective laser melting products related to different orientations and proc...

Contibutors: Pal, Snehashis (author) / Kokol, Vanja (author) / Gubeljak, Nenad (author) / Hadžistević, Miodrag (author) / Hudak, Radovan (author) / Drstvenšek, Igor (author)

1. PDF document (1144 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

A modified method of von Mises stress-based MWCM for fatigue-life prediction under fully-reversed...

Contibutors: Liu, Bowen (author) / Yan, Xiangqiao (author)

1. PDF document (1708 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental investigation of LM25 alloy reinforced with SiC, Gr and MOA particles

Contibutors: Manickam, Dhanashekar (author) / Senthil Kumar, Velukkudi Santhanam (author) / Sivagnanam, Karthikeyan (author)

1. PDF document (1926 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Investigation of the mechanical properties of AlSi9Cu3(Fe)/MWCNT nanocomposites prepared by HPDC

Contibutors: Špada, Vedrana (author) / Stanić, Davor (author) / Brnardić, Ivan (author)

1. PDF document (3032 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of manganese doping on the magnetic and magnetocaloric properties of zinc ferrite

Contibutors: Zhao, Haitao (author) / Li, Xuehan (author) / Hui, Zhao (author) / Wang, Yulian (author)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (858 kB)

Microstructure evolution and fracture analysis of hot-rolled explosive-welded 06Cr13/Q345R compos...

Contibutors: Li, Huaying (author) / Zhao, Guanghui (author) / Li, Juan (author) / Ma, Lifeng (author) / Huang, Qingxue (author) / Li, Yugui (author)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (11 MB)

Investigation of photoneutron contamination from the 18-MV photon beam in a medical linear accele...

Contibutors: Karaman, Onur (author) / Güneş Tanýr, Ayşe (author) / Karaman, Ceren (author)

Wear-resistant single-phase high-entropy alloy coatings prepared on TI6AL4V with laser cladding

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (669 kB)

1. TXT document (31 kB)

Contibutors: Juan, Yongfei (author) / Jun, Li (author) / Jiang, Yunqiang (author) / Jia, Wanli (author) / Lu, Zhongjie (author)

1. PDF document (3494 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Corrosion performance of steel in blended cement pore solutions

Contibutors: Hren, Miha (author) / Kosec, Tadeja (author) / Legat, Andraž (author) / Bokan-Bosiljkov, Violeta (author)

1. PDF document (1846 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of solution treatment on gamma-prime recovery in a creep-damaged directionally solidified ...

Contibutors: Xiao, Junfeng (author) / Tang, Wenshu (author) / Nan, Qing (author) / Gao, Sifeng (author) / Liu, Yongjun (author) / Zhang, Jiong (author)

1. PDF document (3983 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

The mechanical behaviour of new long-span hollow-core roofs based on aluminum alloy honeycomb panels

Contibutors: Zhao, Caiqi (author) / Ma, Jun (author) / Du, Shengchen (author)

1. PDF document (2641 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

A geometrical approach to deriving a bushing height equation for thermal friction drilling

Contibutors: Demir, Zülküf (author)

1. PDF document (2321 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Fabrication and simulation of feedstock for titanium-powder injection-molding cortical-bone screws

Contibutors: Urtekin, Levent (author) / Genç, Asým (author) / Bozkurt, Fatih (author)

1. PDF document (1912 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Numerical study on the compressive behaviour of an aluminium honeycomb core

Contibutors: Mertani, Boubekeur Mohammed Bilel (author) / Keskes, Boualem (author) / Tarfaoui, Mostapha (author)

1. PDF document (2873 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Study on compressive behavior and failure mechanism of a composite energy-saving wall made of rec...

Contibutors: Li, Jianhua (author) / Chen, Wenjing (author) / Zhu, Renyan (author) / Liu, Yan (author) / Zhou, Zhongyi (author)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (533 kB)

The effect of core configuration on the compressive performance of metallic sandwich panels

Contibutors: Zurnaci, Erman (author) / Gökkaya, Hasan (author)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (569 kB)

Experimental investigation of the cavitation erosion of a flat aluminum part using a sonotrode te...

Contibutors: Dursun, Harun (author) / Sevilgen, Gökhan (author) / Karamangil, Mehmet Ýhsan (author)

1. PDF document (1830 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2

Contibutors: Bošković, Ivana (author) / Vukčević, Mira (author) / Nenadović, Snežana B. (author) / Mirković, Miljana (author) / Stojmenović, Marija D. (author) / Pavlović, Vladimir (author) / Kljajević, Ljiljana (author)

1. PDF document (2120 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Sustainable waste-treatment procedure for the spent potlining (SPL) from aluminium production

Contibutors: Tropenauer, Blaž (author) / Klinar, Dušan (author) / Samec, Niko (author) / Golob, Janvit (author) / Kortnik, Jože (author)

1. PDF document (1496 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Mechanical relationships between the fiber-lamination methods and the structural functions of ory...

Contibutors: Zhao, Caiqi (author) / Du, Shengchen (author) / Chen, Jinxiang (author) / Tuo, Wanyong (author) / Xu, Mengye (author)

1. PDF document (1096 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Properties of high-performance fiber-reinforced concrete after thermal treatment at high temperat...

Contibutors: Pavlík, Zbyšek (author) / Fořt, Jan (author) / Pavlíkova, Milena (author) / Zemanová, Lucie (author) / Pokorný, Jaroslav (author) / Trník, Anton (author) / Čítek, David (author) / Černý, Robert (author)

1. PDF document (1358 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Hot-deformation behaviour and flow-stress prediction of the TC4 alloy considering strain

Contibutors: Han, Fei (author) / Wang, Yun (author) / Chen, Rongquan (author) / Gao, Qi (author) / Wang, Yongqiang (author) / Wang, Dingchun (author)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (787 kB)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Fabrication of mems-based electrothermal microactuators with additive manufacturing technologies

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

1. TXT document (31 kB)

Contibutors: Ertugrul, Ishak (author) / Akkus, Nihat (author) / Yuce, Huseyin (author)

Microstructure, texture and mechanical properties of a friction-stir-processed Mg-Al-Ca-Mn-Zn alloy

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (739 kB)

1. TXT document (24 kB)

Contibutors: Song, Leipeng (author) / Zhang, Yang (author) / Lu, Yalin (author) / Li, Xingcheng (author) / Wang, Xu (author) / Wang, Jian (author) / Wang, Jiangtao (author)

1. PDF document (4173 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Mixed-mode fracture analysis in high-performance concrete using a Brazilian disc test

Contibutors: Miarka, Petr (author) / Seitl, Stanislav (author) / Bílek, Vlastimil (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (230 kB)

Microstructural changes in cement mortar due to an alkali carbonate reaction

Contibutors: Štukovnik, Petra (author) / Bokan-Bosiljkov, Violeta (author) / Marinšek, Marjan (author)

Research on the relation between the particle shape of a coarse aggregate and void content

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (16 MB)

1. TXT document (30 kB)

Contibutors: He, Xiao (author) / Yin, Jian (author) / Yang, Jiewen (author) / Liang, Qiao (author) / Wu, Songyun (author)

Influence of the substrate hardness and fracture toughness on the dynamic wear properties of coat...

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (618 kB)

1. TXT document (18 kB)

Contibutors: Sedlaček, Marko (author) / Šetina, Barbara (author) / Česnik, Damir (author) / Podgornik, Bojan (author)

1. PDF document (2978 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Synthesis of stable cannabidiol (CBD) nanoparticles in suspension

Contibutors: Štukelj, Roman (author) / Benčina, Metka (author) / Fanetti, Mattia (author) / Valant, Matjaž (author) / Drab, Mitja (author) / Iglič, Aleš (author) / Kralj-Iglič, Veronika (author)

The uncertainty of hardness measurements related to the measurement method, surface preparation a...

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (862 kB)

1. TXT document (30 kB)

Contibutors: Guštin, Agnieszka (author) / Žužek, Borut (author) / Podgornik, Bojan (author) / Kevorkijan, Varužan (author)

1. PDF document (2128 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Using the modified strip yield model for crack growth under variable amplitude loading in AA 2124...

Contibutors: Šedek, Jakub (author) / Růžek, Roman (author)

Operational process simulation and optimization of a continuous-discharge system in a backfilling...

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (141 kB)

1. TXT document (20 kB)

Contibutors: Ren, Weicheng (author) / Wang, Shaohuai (author) / Gao, Rugao (author) / Qiao, Dengpan (author)

1. PDF document (3998 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Preparations of composite concretes using iron ore tailings as fine aggregates and their mechanic...

Contibutors: Jiang, Yufeng (author) / Wang, Hao (author) / Chen, Yue (author) / Ruan, Min (author) / Li, Wen (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (813 kB)

Effect of B4C addition on the microstructure, hardness and dry-sliding-wear performance of AZ91 c...

Contibutors: Özdemir Öge, Tuba (author) / Öge, Mecit (author) / Yilmaz, Volkan (author) / Banu Özdemir, Firdevs (author)

1. PDF document (3665 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Numerical simulation and experimental verification of the quenching temperature field of grinding...

Contibutors: Song, Mengchao (author) / Pu, Yisong (author) / Liu, Qi (author) / Wang, Ran (author) / Wang, Baoqi (author)

1. PDF document (1748 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Corrosion behavior of 304L stainless steel in a B-Li coolant for a nuclear power plant

Contibutors: Tian, Zhaohui (author) / Song, Lijun (author) / Fang, Kewei (author) / Lin, Genxian (author) / Zhou, Huiling (author)

1. PDF document (1617 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Influence of warm rolling and heat treatment in the alpha-gamma area of a three-layer strip on th...

Contibutors: Beganović, Omer (author) / Hadžalić, Mustafa (author) / Kesić, Suvad (author)

1. PDF document (1031 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)