dLib.si - search results

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

Effect of severe plastic and heavy cold deformation on the structural and mechanical properties o...

Contibutors: Palán, Jan (author) / Šutta, P. (author) / Kubina, Tomáš (author) / Dománková, Mária (author)

1. PDF document (1140 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Determination of the deformational energy during slab-width rolling on an edger mill

Contibutors: Vode, Franci (author) / Jaklič, Anton (author) / Robič, Roman (author) / Košir, Anton (author) / Perko, Franci (author) / Novak, Jani (author)

Mathematical models for evaluating the influence of degradation on the tensile and flexural prope...

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (577 kB)

1. TXT document (19 kB)

Contibutors: Oladele, Isiaka Oluwole (author) / Adesoji Adediran, Adeolu (author) / Akinwekomi, Akeem Damilola (author) / Adara, Peace Pamilerin (author)

Evaluation of the thermal resistance of selected bentonite binders

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

1. TXT document (33 kB)

Contibutors: Beňo, Jaroslav (author) / Vontorová, Jiřina (author) / Matějka, Vlastimil (author) / Gál, Karel (author)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

Monitoring the effect of quartz-sand replacement by amorphous-silica raw material on the microstr...

Contibutors: Hušt`avová, Jana (author) / Černý, Vít (author) / Drochytka, Rostislav (author)

1. PDF document (1385 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Estimation of the fatigue threshold values for a crack propagating through a bi-material interfac...

Contibutors: Náhlík, Lubos (author)

Metalografska preiskava in korozijska odpornost zvarov feritnega nerjavnega jekla

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

1. TXT document (15 kB)

Contibutors: Torkar, Matjaž (author) / Kocijan, Aleksandra (author) / Celin, Roman (author) / Burja, Jaka (author) / Podgornik, Bojan (author)

1. PDF document (3359 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Comparison of the surface and anticorrosion properties of SiOsub2 and TiOsub2 nanoparticle epoxy ...

Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (541 kB)

Increasing the wear resistance of Al-Mg components using thermal-spray coatings

Contibutors: Lukauskaitë, Raimonda (author) / Černašejus, Olegas (author) / Škamat, Jelena (author) / Asadauskas, Svajus (author) / Ručinskienë, Alma (author) / Kalpokaitë-Dičkuvienë, Regina (author) / Višniakov, Nikolaj (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

Modification of non-metallic inclusions with rare-earth metals in 50CrMoV13-1 steel

Contibutors: Šuler, Blaž (author) / Burja, Jaka (author) / Medved, Jože (author)

1. PDF document (1783 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

An evaluation of the properties of rotor forgings made from 26NiCrMoV115 steel

Contibutors: Balcar, Martin (author) / Turecký, Václav (author) / Sochor, Libor (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Bažan, Jiří (author) / Němeček, Stanislav (author) / Kešner, Dušan (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (474 kB)

Fatigue properties of sintered DIN SINT-D30 powder metal before and after heat treatment

Contibutors: Šori, Marko (author) / Šuštaršič, Borivoj (author) / Glodež, Srečko (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

Materiali in nosilnost velikih kotalnih ležajev

Contibutors: Kunc, Robert (author) / Prebil, Ivan (author) / Torkar, Matjaž (author)

1. PDF document (1277 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Lasersko reparaturno varjenje termo razpok na orodjih za tlačno litje aluminija

Contibutors: Pleterski, Matej (author) / Tušek, Janez (author) / Kosec, Ladislav (author) / Klobčar, Damjan (author) / Muhič, Mitja (author) / Muhič, Tadej (author)

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidi...

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (940 kB)

1. TXT document (15 kB)

Contibutors: Yi, Xiaojie (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Xu, Yajun (author) / Mahamane Sani, Abdou Yahouza (author)

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Laser welding of the new grade of advanced high-strength steel Domex 960

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Lisiecki, Aleksander (author)

1. PDF document (4387 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate

Contibutors: Maretić, Mauro (author) / Smoljan, Božidar (author) / Iljkić, Dario (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (948 kB)

Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint

Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (792 kB)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

Possibilities of NUS and impact-echo methods for monitoring steel corrosion in concrete

Contibutors: Timčaková-Šamárková, Kristýna (author) / Matysík, Michal (author) / Chobola, Zdeněk (author)

1. PDF document (1342 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of carbon content on the corrosion of MgO-C refractory material caused by acid and ...

Contibutors: Adolf, Zdeněk (author) / Suchánek, Petr (author) / Husar, Ivo (author)

Zaviralni sistem v indukcijskem števcu

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (124 kB)

1. TXT document (11 kB)

Contibutors: Chvatal, Damijan (author)

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

The phenomenon of reduced plasticity in low-alloyed copper

Contibutors: Ozgowicz, Wojciech (author) / Kalinowska-Ozgowicz, Elżbieta (author) / Grzegorczyk, Barbara (author) / Lenik, Klaudiusz (author)

1. PDF document (5127 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Structural characterization of platinum foil for neural stimulating electrodes using a four-point...

Contibutors: Pečlin, Polona (author) / Bizjak, Milan (author) / Pribošek, Marko (author) / Godec, Matjaž (author) / Ribarič, Samo (author) / Rozman, Janez (author)

Research on the quality of the welded joint of aluminium alloy sheet AA6082-T6 using FSW, MIG and...

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (634 kB)

1. TXT document (35 kB)

Contibutors: Šibalić, Nikola (author) / Vukčević, Milan M. (author)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (979 kB)

Influence of the tool rotational speed on the microstructure and joint strength of friction-stir ...

Contibutors: Dinaharan, Isaac (author) / Akinlabi, Esther T. (author)

1. PDF document (3469 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of stop-hole-induced material removal on the fatigue properties of cracked DT4C steel

Contibutors: Zhang, Chunguo (author) / Liu, Rongwei (author) / Liu, Qiankun (author) / Ren, Cuiping (author)

1. PDF document (2330 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

The effect of current types on the microstructure and corrosion properties of Ni/nanoAlsub2Osub3 ...

Contibutors: Kucharska, Beata (author) / Krawczynska, Agnieszka (author) / Rożniatowski, Krzysztof (author) / Zdunek, Joanna (author) / Poplawski, Karol (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (5584 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

A new topology for the trajectories of the meniscus during continuous steel casting

Contibutors: Risteski, Ice B. (author)

Effect of holding time on the production of Nb-NbAl3 intermetallic composites via electric-curren...

Numbering: 2007, volume 41, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

1. TXT document (57 kB)

Contibutors: Aybey, Muhammed (author) / Yener, Tuba (author) / Ipek, Mediha (author) / Zeytin, Sakin (author)

1. PDF document (1282 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (15 kB)

Gelling polysaccharide as the electrolyte matrix in a dye-sensitized solar cell

Contibutors: Bantang, Jose Paolo (author) / Camacho, Drexel (author)

Formation of Ni-Ti intermetallics during reactive sintering at 800-900 °C

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (890 kB)

1. TXT document (71 kB)

Contibutors: Novák, Pavel (author) / Vladimír, Vojtěch (author) / Průša, Filip (author) / Pokorný, Petr (author) / Salvetr, Pavel (author) / Knaislová, Anna (author) / Nová, Kateřina (author)

1. PDF document (1498 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Effects of subzero treatments on the mechanical properties of the SAE 4140 steel

Contibutors: Sahin, Ismail (author) / Höke, Gürhan (author) / Cinici, Hanifi (author) / Findik, Tayfun (author) / Koralay, Haluk (author) / Arabaci, Ugur (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

Numerical and experimental analyses of the delamination of cross-ply laminates

Contibutors: Zemčík, Robert (author) / Laš, Vladislav (author)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Numbering: 2008, volume 42, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (158 kB)

1. TXT document (16 kB)

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Polymer-matrix-bonded polyester fibers as a substitute for materials used for the cores of vacuum...

Contibutors: Zach, Jiří (author) / Novák, Vítězslav (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (349 kB)

Effect of ZrOsub2 additions on fabrication of ZrOsub2/Mg composites via friction-stir processing

Contibutors: Chen, Hongmei (author) / Li, Xiaowen (author) / Liao, Si'en (author) / Zhang, Jing (author) / Jin, Yunxue (author) / Cui, Hongwei (author)

1. PDF document (1536 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Isothermal oxidation behavior of electrospark deposited NiCrAlY coatings on a Ni-based single-cry...

Contibutors: Guo, Cean (author) / Liang, Ting (author) / Lu, Fengsheng (author) / Liang, Zhengang (author) / Zhao, Shuang (author) / Zhang, Jian (author)

1. PDF document (1642 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Sinteza magnetnih nanodelcev, funkcionaliziranih s tanko plastjo silike

Contibutors: Čampelj, Stanislav (author) / Makovec, Darko (author) / Bele, Marjan (author) / Drofenik, Mihael (author) / Jamnik, Janko (author)

Numbering: 2007, volume 41, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (733 kB)

Vpliv kemijske sestave in toplotne obdelave na lastnosti feritnega nerjavnega jekla za magnetne v...

Contibutors: Grešovnik, Ferdinand (author)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (138 kB)

Estimation of the boron diffusion coefficients in FeB and Fe2B layers during the pack-boriding of...

Contibutors: Abdellah, Zahra Nait (author) / Keddam, Mourad (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

A metallographic examination of a fractured connecting rod

Contibutors: Celin, Roman (author) / Arzenšek, Boris (author) / Kmetič, Dimitrij (author)

Presentation methods of textures measurements

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (288 kB)

1. TXT document (10 kB)

Contibutors: Godec, Matjaž (author) / Jenko, Monika (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

The influence of cooling rate on the microstructure of an Al-Mn-Be alloy

Contibutors: Rozman, Niko (author) / Bončina, Tonica (author) / Anžel, Ivan (author) / Zupanič, Franc (author)

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (140 kB)

The implementation of an online mathematical model of slab reheating in a pusher-type furnace

Contibutors: Jaklič, Anton (author) / Vode, Franci (author) / Robič, Roman (author) / Perko, Franci (author) / Strmole, Branko (author) / Novak, Jani (author) / Triplat, Jožef (author)

Numbering: 2005, volume 39, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (269 kB)

Analysis of the fiber distribution, size, and volume ratio of unidirectional composite plates wit...

Contibutors: Zemčík, Robert (author) / Srbová, Hana (author) / Ekštein, Kamil (author) / Pirner, Ivan (author) / Medlín, Rostislav (author)

1. PDF document (5357 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Synthesis of cobalt-alloyed ZnS quantum dots and investigation of their characteristics

Contibutors: Horoz, Sabit (author)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (444 kB)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Optimum bushing length in thermal drilling of galvanized steel using artificial neural network co...

Contibutors: Hynes, Navasingh Rajesh Jesudoss (author) / Kumar, Ramar (author) / Sujana, Jebaraj Angela Jennifa (author)

1. PDF document (2122 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (86 kB)

Residual stresses in shot-peened sheets of AlMg4.5Mn alloy

Contibutors: Mišović, Mitar (author) / Tadić, Nebojša (author) / Ćulafić, Zoran (author) / Jelić, Miloš (author)

Numbering: 2002, volume 36, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (163 kB)

Control of reduction of continuous slab casting with a thermal model

Contibutors: Stetina, Jozef (author) / Ramik, Pavel (author) / Katolicky, Jaroslav (author)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (819 kB)

Effects of heat inputs on the structure of Ni-based amorphous composite coatings applied with las...

Contibutors: Li, Ruifeng (author) / Chen, Zhaohui (author) / Gu, Jiayang (author) / Wang, Yuxin (author) / Wu, Mingfang (author) / Tian, Yingtao (author)

1. PDF document (1624 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the electromagnetic compound field on the grain growth and wear resistance of a Cu-Pb m...

Contibutors: Li, Ziyang (author) / Yu, Ting (author) / Wang, Dongxin (author) / Geng, Guihong (author)

1. PDF document (1895 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Modeling of calmodulin-mediated processes in tissues using calmodulin-functionalized gold nanopar...

Contibutors: Chubinidze, Ketevan (author) / Partsvania, Besarion (author) / Khuskivadze, Alexandre (author) / Burnadze, Paata (author) / Petriashvili, Gia (author) / Dzidziguri, Diana (author) / Mukbaniani, Omari V. (author)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Avtomatski preskusni sistem za preverjanje kvalitete ultrazvočne merilne komore

Contibutors: Čop, Rudi (author)

XPS and SEM of unpolished and polished FeS surface

Numbering: 2000, volume 34, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (103 kB)

1. TXT document (13 kB)

Contibutors: Mandrino, Djordje (author)

Numbering: 2011, volume 45, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (676 kB)

Effect of an electromagnetic field on the microstructure and properties of Cr(Ti)AlN hard coating...

Contibutors: Wang, Jin (author) / Ma, Dayan (author) / Liu, Qi (author) / Jin, Yetang (author) / Wang, Xu (author)

1. PDF document (1675 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Piercing behavior of an in-situ Csubf/Asub2osub3 composite in waterjet machining

Contibutors: Ren, Jie (author) / Qiao, Xu (author)

1. PDF document (3251 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Dimensional errors in selective laser melting products related to different orientations and proc...

Contibutors: Pal, Snehashis (author) / Kokol, Vanja (author) / Gubeljak, Nenad (author) / Hadžistević, Miodrag (author) / Hudak, Radovan (author) / Drstvenšek, Igor (author)

1. PDF document (1144 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Možnosti uporabe odpadnega kremenovega mulja v opečni industriji

Contibutors: Ducman, Vilma (author) / Kopar, Tinkara (author)

Duplex coating of P/M M2-grade ledeburitic steel

Numbering: 2001, volume 35, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (150 kB)

1. TXT document (19 kB)

Contibutors: Jurči, Peter (author) / Stolař, Pavel (author) / Suchánek, Jan (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (267 kB)

Sensitivity of Weck's reagent to the microstructure inhomogeneities of a pulse-laser-modified AlS...

Contibutors: Steiner Petrovič, Darja (author) / Šturm, Roman (author)

1. PDF document (1678 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Monitoring of polyurethane dispersions after the synthesis

Contibutors: Ocepek, Martin (author) / Zabret, Joži (author) / Kecelj, Janez (author) / Venturini, Peter (author) / Golob, Janvit (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (369 kB)

Influence of the foaming precursor's composition and density on the foaming efficiency, microstru...

Contibutors: Kevorkijan, Varužan (author) / Škapin, Srečo D. (author) / Paulin, Irena (author) / Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Lažeta, Marjana (author)

Design of a wideband planar antenna on an epoxy-resin-reinforced woven-glass material

Numbering: 2011, volume 45, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (373 kB)

1. TXT document (41 kB)

Contibutors: Azim, Rezaul (author) / Islam, Mohammad Tariqul (author)

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (428 kB)

Effect of direct cooling conditions on the microstructure and properties of hot-forged HSLA steel...

Contibutors: Skubisz, Piotr (author) / Lisiecki, Łukasz (author) / Skowronek, Tadeusz (author) / Żak, Artur (author) / Zalecki, Wladysław (author)

1. PDF document (2259 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigation of the freeze-thaw resistance of eco-porous concrete containing fly ash

Contibutors: Zhang, Gui (author) / Yin, Jian (author) / Sheng, Li (author) / Sang, Zhenghui (author) / Xiong, Yao (author) / Gao, Ting (author) / Hu, Xiongwei (author)

1. PDF document (1156 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Application of infinite-element calculations for consolidating a railway foundation of blowing sa...

Contibutors: Xie, Kai-zhong (author) / Pan, Ying-zhong (author) / Ni, Hao (author) / Wang, Hong-wei (author)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (726 kB)

On the different nature of time-dependent and time-independent irreversible deformation

Contibutors: Getsov, Leonid Borisovich (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (172 kB)

A modified method of von Mises stress-based MWCM for fatigue-life prediction under fully-reversed...

Contibutors: Liu, Bowen (author) / Yan, Xiangqiao (author)

1. PDF document (1708 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the skin-core morphology on the mechanical properties of injection-moulded parts

Contibutors: Hnatkova, Eva (author) / Dvorak, Zdenek (author)

1. PDF document (1348 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of a cryogenic treatment on the fracture toughness of an AISI 420 martensitic stainless...

Contibutors: Prieto, G. (author) / Tuckart, Walter (author) / Ipina, J. E. Pérez (author)

Izračun parametrov Weibullove porazdelitve za oceno upogibne trdnosti valovitih strešnih plošč

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

1. TXT document (31 kB)

Contibutors: Ambrožič, Milan (author) / Vidović, Krunoslav (author)

Effect of gas atmosphere on the non-metallic inclusions in laser-welded TRIP steel with Al and Si...

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (147 kB)

1. TXT document (26 kB)

Contibutors: Grajcar, Adam (author) / Różański, Maciej (author) / Kamińska, Małgorzata (author) / Grzegorczyk, Barbara (author)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (820 kB)

Experimental investigation of LM25 alloy reinforced with SiC, Gr and MOA particles

Contibutors: Manickam, Dhanashekar (author) / Senthil Kumar, Velukkudi Santhanam (author) / Sivagnanam, Karthikeyan (author)

1. PDF document (1926 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeliranje rezultatov Proctorjevega preskusa

Contibutors: Pavšič, Primož (author) / Lenart, Stanislav (author)

Investigation of the mechanical properties of AlSi9Cu3(Fe)/MWCNT nanocomposites prepared by HPDC

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (112 kB)

1. TXT document (14 kB)

Contibutors: Špada, Vedrana (author) / Stanić, Davor (author) / Brnardić, Ivan (author)

1. PDF document (3032 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of sulphide inclusions on the pitting-corrosion behaviour of high-Mn steels in chloride an...

Contibutors: Grajcar, Adam (author) / Plachcińska, Aleksandra (author)

1. PDF document (3310 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Non-traditional whiteware based on calcium aluminate cement

Contibutors: Sokolář, Radomír (author)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (237 kB)

A nondestructive experimental determination of the heat flux during cooling of direct-chill cast ...

Contibutors: Založnik, Miha (author) / Bajsič, Ivan (author) / Šarler, Božidar (author)

Numbering: 2002, volume 36, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (277 kB)

Distribution of Alsub2Osub3 reinforcement particles in austenitic stainless steel depending on th...

Contibutors: Kračun, Ana (author) / Podgornik, Bojan (author) / Tehovnik, Franc (author) / Kafexhiu, Fevzi (author) / Jenko, Darja (author)

1. PDF document (3935 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

Effect of heat treatment on the microstructure and properties of Cr-V ledeburitic steel

Contibutors: Krum, Stanislav (author) / Sobotová, Jana (author) / Jurči, Petr (author)

Numbering: 2010, volume 44, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (582 kB)

Application of the Taguchi method to optimize the cutting conditions in hard turning of a ring bore

Contibutors: Boy, Mehmet (author) / Ciftci, Ibrahim (author) / Gunay, Mustafa (author) / Ozhan, Feridun (author)

Corrosion on polished and laser-textured surfaces of an Fe-Mn biodegradable alloy

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (415 kB)

1. TXT document (34 kB)

Contibutors: Hočevar, Matej (author) / Donik, Črtomir (author) / Paulin, Irena (author) / Kocijan, Aleksandra (author) / Tehovnik, Franc (author) / Burja, Jaka (author) / Gregorčič, Peter (author) / Godec, Matjaž (author)

1. PDF document (2931 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

Mikrostruktura industrijsko kontinuirno ulite Ni-superzlitine GMR 235

Contibutors: Zupanič, Franc (author) / Bončina, Tonica (author) / Križman, Alojz (author)

Numbering: 2004, volume 38, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (178 kB)

Effect of manganese doping on the magnetic and magnetocaloric properties of zinc ferrite

Contibutors: Zhao, Haitao (author) / Li, Xuehan (author) / Hui, Zhao (author) / Wang, Yulian (author)

Sodi za shranjevanje radioaktivnih odpadkov

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (858 kB)

1. TXT document (26 kB)

Contibutors: Celin, Roman (author) / Kmetič, Dimitrij (author) / Gričar, Matjaž (author)

The diffuse phase transition of Ti-rich (Basub0.75Srsub0.25) Tisub1+fdeltaOsub3+delta2delta diele...

Numbering: 2001, volume 35, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (133 kB)

1. TXT document (14 kB)

Contibutors: Zhang, Chen (author) / Zhong, Xin (author) / Chen, Fang-Xu (author) / Tang, Zhu-Ming (author)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (556 kB)

Rheological properties of feedstocks and the structure of injection moulders for sintering compos...

Contibutors: Golombek, K. (author) / Matula, G. (author) / Stamenković, Dragomir (author) / Mikula, Jarosław (author) / Soković, Mirko (author)

1. PDF document (2745 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

The effects of leaching on the mineral phases in argon-oxygen decarburization of stainless-steel ...

Contibutors: Wang, Ya-Jun (author) / Zeng, Ya-Nan (author) / Li, Jun-Guo (author)

1. PDF document (2089 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optodinamski vidik varjenja aluminija s pulznim laserjem Nd:YAG

Contibutors: Gorkič, Aleš (author) / Diaci, Janez (author) / Grad, Ladislav (author) / Babnik, Aleš (author) / Možina, Janez (author)

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (133 kB)

Rock burst dependency on the type of steel arch support in the Velenje mine

Contibutors: Vižintin, Goran (author) / Mayer, Janez (author) / Lajlar, Bojan (author) / Vukelič, Željko (author)

1. PDF document (3191 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Microstructure evolution and fracture analysis of hot-rolled explosive-welded 06Cr13/Q345R compos...

Contibutors: Li, Huaying (author) / Zhao, Guanghui (author) / Li, Juan (author) / Ma, Lifeng (author) / Huang, Qingxue (author) / Li, Yugui (author)

Effect of particle impingement on electrochemical properties of stainless steel in a jet flow

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (11 MB)

1. TXT document (28 kB)

Contibutors: Cheng, Jiarui (author) / Zhang, Ningsheng (author) / Dou, Yihua (author) / Li, Zhen (author) / Cao, Yinping (author)

1. PDF document (2820 kB)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Numerical optimization of the method of cooling of a massive casting of ductile cast-iron

Contibutors: Kavička, František (author) / Sekanina, Buhumil (author) / Stetina, Jozef (author) / Stransky, Karel (author) / Gontarev, Vasilij (author) / Dobrovská, Jana (author)

Numbering: 2009, volume 43, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (680 kB)

Deformation and improvement of the IR transmission of single-crystal silicon by direct current he...

Contibutors: Miura, Kiyotaka (author) / Shimotsuma, Yasuhiko (author) / Sakakura, Masaaki (author) / Gunji, Shunsuke (author) / Sakamoto, Taiki (author) / Morishita, Kohei (author) / Hachinohe, Satoru (author)

1. PDF document (2413 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Electrical conductivity of sintered LSM ceramics

Contibutors: Marinšek, Marjan (author)

1. PDF document (1460 kB)

Numbering: 2009, volume 43, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Imobilizacija letečega pepela z zasteklitvijo

Contibutors: Orešek, Natalija (author) / Berk, Franc (author) / Samec, Niko (author) / Zupanič, Franc (author)

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (329 kB)