Advances in production engineering & management

številka: 1 (2015)
številka: 2 (2015)
številka: 3 (2015)
številka: 4 (2015)
A hierarchical framework for index computation in sustainable manufacturing (številka: 1, 2015)
The impact of technical and organisational innovation concepts on product characteristics (številka: 1, 2015)
Tool selection for rough and finish CNC milling operations based on tool-path generation and machining optimisation (številka: 1, 2015)
An implementation of lean scheduling in a job shop environment (številka: 1, 2015)
Predictive analysis of criterial yield during travelling wire electrochemical discharge machining of Hylam based composites (številka: 2, 2015)
Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning Al/SiCp MMC, using conventional and soft computing techniques (številka: 2, 2015)
Wear characteristics of heat-treated Hadfield austenitic manganese steel for engineering application (številka: 2, 2015)
Increasing student motivation and knowledge in mechanical engineering by using action cameras and video productions (številka: 2, 2015)
Effect of a milling cutter diameter on distortion due to the machining of thin wall thin floor components (številka: 3, 2015)
Experimental and simulation study on the warm deep drawing of AZ31 alloy (številka: 3, 2015)
An integrated sustainable manufacturing strategy framework using fuzzy analytic network process (številka: 3, 2015)
Characterizations of 304 stainless steel laser cladded with titanium carbide particles (številka: 3, 2015)
The application of service robots for logistics in manufacturing processes (številka: 4, 2015)
Using entropy weight, OEC and fuzzy logic for optimizing the parameters during EDM of Al-24 % SiCp MMC (številka: 4, 2015)
Permanent magnets for water-scale prevention (številka: 4, 2015)
Lean capacity planning for tool room (številka: 4, 2015)
A grey-fuzzy approach for optimizing machining parameters and the approach angle in turning AISI 1045 steel (številka: 4, 2015)

številka: 1 (2016)
številka: 2 (2016)
številka: 3 (2016)
številka: 4 (2016)
Aluminium hot extrusion process capability improvement using Six Sigma (številka: 1, 2016)
Integration of SWOT and ANP for effective strategic planning in the cosmetic industry (številka: 1, 2016)
Assessment of mechanical and wear properties of epoxy-based hybrid composites (številka: 1, 2016)
A knowledge-based system for end mill selection (številka: 1, 2016)
Thermal analysis on a weld joint of aluminium alloy in gas metal arc welding (številka: 1, 2016)
A bi-objective inspection policy optimization model for finite-life repairable systems using a genetic algorithm (številka: 1, 2016)
Surface roughness assessing based on digital image features (številka: 2, 2016)
Simultaneous determination of production and shipment decisions for a multi-product inventory system with a rework process (številka: 2, 2016)
Analysis for prevalence of carpal tunnel syndrome in shocker manufacturing workers (številka: 2, 2016)
A simulation approach to the process planning problem using a modified particle swarm optimization (številka: 2, 2016)
Visual measurement of layer thickness in multi-layered functionally graded metal materials (številka: 2, 2016)
Modelling supply risks in interdependent manufacturing systems (številka: 2, 2016)
Investigation of dynamic elastic deformation of parts processed by fused deposition modeling additive manufacturing (številka: 3, 2016)
Business plan feedback for cost effective business processes (številka: 3, 2016)
Studies of corrosion on AA6061 and AZ 61 friction stir welded plates (številka: 3, 2016)
Production monitoring system for understanding product robustness (številka: 3, 2016)
A green production strategies for carbon-sensitive products with a carbon cap policy (številka: 3, 2016)
Consideration of a buyback contract model that features game-leading marketing strategies (številka: 3, 2016)
Scheduling batches in multi hybrid cell manufacturing system considering worker resources (številka: 3, 2016)
Tool wear and cost evaluation of face milling grade 5 titanium alloy for sustainable machining (številka: 3, 2016)
A new multi-objective Jaya algorithm for optimization of modern machining processes (številka: 4, 2016)
Effect of delayed differentiation on a multiproduct vendor-buyer integrated inventory system with rework (številka: 4, 2016)
A case-based reasoning approach for non-traditional machining processes selection (številka: 4, 2016)
An integrated lean approach to Process Failure Mode and Effect Analysis (PFMEA) (številka: 4, 2016)
Dimensional accuracy of camera casing models 3D printed on Mcor IRIS (številka: 4, 2016)
Finite element method for optimum design selection of carport structures under multiple load cases (številka: 4, 2016)
Experimental modeling of fluid pressure during hydroforming of welded plates (številka: 4, 2016)
Multi-objective optimization of the turning process using a Gravitational Search Algorithm (GSA) and NSGA-II approach (številka: 4, 2016)
Applying multi-phase particle swarm optimization to solve bulk cargo port scheduling problem (številka: 4, 2016)
A combined zone-LP and simulated annealing algorithm for unequal-area facility layout problem (številka: 4, 2016)

številka: 1 (2017)
številka: 3 (2017)
številka: 4 (2017)
Automatic high resolution measurement set-up for calibrating precise line scales (številka: 1, 2017)
A genetic regulatory network-based sequencing method for mixed-model assembly lines (številka: 1, 2017)
Reconsidering production coordination (številka: 1, 2017)
Influence of the production fluctuation on the process energy intensity in iron and steel industry (številka: 1, 2017)
Fuzzy Delphi and hybrid AH-MATEL integration for monitoring of paint utilization (številka: 1, 2017)
Performance modelling based on value analysis for improving product development process architecture (številka: 1, 2017)
The impact of information and communication technologies (ICT) on agility, operating, and economical performance of supply chain (številka: 1, 2017)
Solving dual flexible job-shop scheduling problem using a Bat Algorithm (številka: 1, 2017)
A novel approach of applying copper nanoparticles in minimum quantity lubrication for milling of Ti-6Al-4V (številka: 2, 2017)
A study on the manufacturing decision-making and optimization of hybrid-channel supply chain for original equipment manufacturer (številka: 2, 2017)
Vehicle scheduling based on plant growth simulation algorithm and distribution staff behavior (številka: 2, 2017)
Quantifying the robustness of process manufacturing concept - a medical product case study (številka: 2, 2017)
Analysis of corrosion resistance when turning martensitic stainless steel X20Cr13 under chilled air-cooling (številka: 2, 2017)
Multi-criteria selection of manufacturing processes in the conceptual process planning (številka: 2, 2017)
An inventory model with METRIC approach in location-routing-inventory problem (številka: 2, 2017)
Drilling process optimization by using fuzzy-based multi-response surface methodology (številka: 2, 2017)
Concept of intelligent supporting information system for development of new appliances (številka: 2, 2017)
Production lot-sizing decision making considering bottleneck drift in multi-stage manufacturing system (številka: 3, 2017)
Simulation of collaborative product development knowledge diffusion using a new cellular automata approach (številka: 3, 2017)
Diagnostic of peripheral longitudinal grinding by using acoustic emission signal (številka: 3, 2017)
Comparison of 3D scanned kidney stone model versus computer-generated models from medical images (številka: 3, 2017)
An integer programming approach for process planning for mixed-model parts manufacturing on a CNC machining center (številka: 3, 2017)
Predicting the availability of production lines by combining simulation and surrogate model (številka: 3, 2017)
Determination of accuracy contour and optimization of workpiece positioning for robot milling (številka: 3, 2017)
Capabilities of industrial computed tomography in the field of dimensional measurements (številka: 3, 2017)
Container assignment optimization considering overlapping amount and operation distance in rail-road transshipment terminal (številka: 4, 2017)
Work sampling for the production development (številka: 4, 2017)
Vehicle routing optimization with multiple fuzzy time windows based on improved wolf pack algorithm (številka: 4, 2017)
Infrared temperature measurement and increasing infrared measurement accuracy in the context of machining process (številka: 4, 2017)
Laser drilling of alumina ceramics using solid state Nd (številka: 4, 2017)
An overview and evaluation of quality-improvement methods from the manufacturing and supply-chain perspective (številka: 4, 2017)
A general approach to optimize disassembly sequence planning based on disassembly network (številka: 4, 2017)
An integrated generalized discriminant analysis method and chemical reaction support vector machine model (GDA-CRSVM) for bearing fault diagnosis (številka: 4, 2017)
Improving workplace scheduling using artificial neural networks model (številka: 4, 2017)

številka: 1 (2018)
številka: 2 (2018)
številka: 3 (2018)
številka: 4 (2018)
A study of the impact of ergonomically designed workplaces on employee productivity (številka: 1, 2018)
Prediction of surface roughness in the ball-end milling process using response surface methodology, genetic algorithms, and grey wolf optimizer algorithm (številka: 1, 2018)
In-process non-destructive ultrasonic testing application during wire plus arc additive manufacturing (številka: 2, 2018)
Optimization of process parameters for machining of Al 7075 thin-walled structures (številka: 2, 2018)
Genetic programming method for modelling of cup height in deep drawing process (številka: 3, 2018)
Flexible job shop scheduling using zero-suppressed binary decision diagrams (številka: 4, 2018)
Visual and optometric issues with smart glasses in Industry 4.0 working environment (številka: 4, 2018)
Compatibility of ionic liquids with hydraulic system components (številka: 4, 2018)

številka: 1 (2019)
številka: 2 (2019)
številka: 3 (2019)
številka: 4 (2019)
Determination of nano-roughness for micro-objects by measuring the van der Waals force (številka: 1, 2019)
Experimental investigation and multi-objective optimization of micro-wire electrical discharge machining of a titanium alloy using Jaya algorithm (številka: 2, 2019)
A new framework for complexity analysis in international development projects - Results from a Delphi study (številka: 2, 2019)
A new architecture model for smart manufacturing (številka: 2, 2019)
A novel multiple criteria decision-making approach based on fuzzy DEMATEL, fuzzy ANP and fuzzy AHP for mapping collection and distribution centers in reverse logistics (številka: 3, 2019)
Hybrid fuzzy multi-attribute decision making model for evaluation of advanced digital technologies in manufacturing: Industry 4.0 perspective (številka: 4, 2019)
A new method for mathematical and simulation modelling interactivity: A case study in flexible job shop scheduling (številka: 4, 2019)
Cutting performance of solid ceramic and carbide end milling tools in machining of nickel based alloy Inconel 718 and stainless steel 316L (nr. 1, 2019)

številka: 1 (2020)
številka: 2 (2020)
številka: 3 (2020)
številka: 4 (2020)
Communication and validation of metrological smart data in IoT-networks (številka: 1, 2020)
Neuro-mechanistic model for cutting force prediction in helical end milling of metal materials layered in multiple directions (številka: 1, 2020)
Development of family of artificial neural networks for the prediction of cutting tool condition (številka: 2, 2020)
Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperature and surface roughness prediction during the face milling process (številka: 2, 2020)
Simulation-based time evaluation of basic manual assembly tasks (številka: 3, 2020)
Testing of novel nano gold ink for inkjet printing (številka: 3, 2020)
A review of production technologies and materials for manufacturing of cardiovascular stents (številka: 4, 2020)
Due date optimization in multi-objective scheduling of flexible job shop production (številka: 4, 2020)

številka: 1 (2021)
številka: 2 (2021)
številka: 3 (2021)
številka: 4 (2021)
A new management approach based on Additive Manufacturing technologies and Industry 4.0 requirements (številka: 1, 2021)
A conceptual model for measuring the competency level of small and medium-sized enterprises (številka: 1, 2021)
The implications of product modularisation on the development process, supplier integration and supply chain design in collaborative product development (številka: 1, 2021)
Study of load-bearing timber-wall elements using experimental testing and mathematical modelling (številka: 1, 2021)
Analysis of the impact of COVID-19 on the coupling of the material flow and capital flow in a closed-loop supply chain (številka: 1, 2021)
Optimization of a multi-objective location model of manufacturing base considering cooperative manufacturing capabilities and service benefits (številka: 1, 2021)
A dynamic job-shop scheduling model based on deep learning (številka: 1, 2021)
Exploring the link between project management approach and project success dimensions: A structural model approach (številka: 1, 2021)
Hybrid ANFIS-Rao algorithm for surface roughness modelling and optimization in electrical discharge machining (številka: 2, 2021)
Improved genetic algorithm (VNS-GA) using polar coordinate classification for workload balanced multiple traveling salesman problem (mTSP) (številka: 2, 2021)
A multi-objective optimal decision model for a green closed-loop supply chain under uncertainty: A real industrial case study (številka: 2, 2021)
Modelling and optimization of sulfur addition during 70MnVS4 steelmaking: An industrial case study (številka: 2, 2021)
Change impact analysis of complex product using an improved three-parameter interval grey relation model (številka: 2, 2021)
Bone drilling with internal gas cooling: Experimental and statistical investigation of the effect of cooling with CO2 on reduction of temperature rise due to drill bit wear (številka: 2, 2021)
Designing a warehouse internal layout using a parabolic aisles based method (številka: 2, 2021)
Joint distribution models in fast-moving consumer goods wholesale enterprise: Comparative analysis and a case study (številka: 2, 2021)
Optimization of disassembly line balancing using an improved multi-objective genetic algorithm (številka: 2, 2021)
Using the gradient boosting decision tree (GBDT) algorithm for a train delay prediction model considering the delay propagation feature (številka: 3, 2021)
A new solution to distributed permutation flow shop scheduling problem based on NASH Q-Learning (številka: 3, 2021)
A smart Warehouse 4.0 approach for the pallet management using machine vision and Internet of Things (IoT): A real industrial case study (številka: 3, 2021)
Recharging and transportation scheduling for electric vehicle battery under the swapping mode (številka: 3, 2021)
Modeling and optimization of finish diamond turning of spherical surfaces based on response surface methodology and cuckoo search algorithm (številka: 3, 2021)
Tactical manufacturing capacity planning based on discrete event simulation and throughput accounting: A case study of medium sized production enterprise (številka: 3, 2021)
Increasing Sigma levels in productivity improvement and industrial sustainability with Six Sigma methods in manufacturing industry: A systematic literature review (številka: 3, 2021)
Simulation-based optimization of coupled material–energy flow at ironmaking-steelmaking interface using One-Ladle Technique (številka: 3, 2021)
A multi-objective selective maintenance optimization method for series-parallel systems using NSGA-III and NSGA-II evolutionary algorithms (številka: 3, 2021)
A multi-criteria decision-making in turning process using the MAIRCA, EAMR, MARCOS and TOPSIS methods: A comparative study (številka: 4, 2021)
A deep learning-based worker assistance system for error prevention: Case study in a real-world manual assembly (številka: 4, 2021)
Impact of Industry 4.0 on decision-making in an operational context (številka: 4, 2021)
Molecular-dynamics study of multi-pulsed ultrafast laser interaction with copper (številka: 4, 2021)
A comparative study of different pull control strategies in multi-product manufacturing systems using discrete event simulation (številka: 4, 2021)
Latent class analysis for identification of occupational accident casualty profiles in the selected Polish manufacturing sector (številka: 4, 2021)
The impact of the collaborative workplace on the production system capacity: Simulation modelling vs. real-world application approach (številka: 4, 2021)
Optimal path planning of a disinfection mobile robot against COVID-19 in a ROS-based research platform (številka: 4, 2021)
Using augmented reality devices for remote support in manufacturing: Case study and analysis (številka: 4, 2021)

številka: 1 (2022)
številka: 2 (2022)
številka: 3 (2022)
številka: 4 (2022)
Optimization approaches for solving production scheduling problem: a brief overview and a case study for hybrid flow shop using genetic algorithms (številka: 1, 2022)
Modelling and simulation of hot direct extrusion process for optimal product characteristics: single and multi-response optimization approach (številka: 1, 2022)
The role of agility in responding to uncertainty: a cognitive perspective (številka: 1, 2022)
A gold nanoparticles and hydroxylated fullerene water complex as a new product for cosmetics (številka: 1, 2022)
Supply chain information coordination based on blockchain technology: a comparative study with the traditional approach (številka: 1, 2022)
The influence of artificial intelligence technology judicial decision reasoning on contract performance in manufacturing supply chain: simulation analysis using Evolutionary Game approach (številka: 1, 2022)
A two-stage construction heuristic approach for vehicle routing problem with split deliveries and pickups: case studies and performance comparison (številka: 1, 2022)
A new multi-objective optimization approach for process parameters optimization during numerical simulation of quenching steel parts (številka: 1, 2022)
Modelling of multiple surface roughness parameters during hard turning: a comparative study between the kinematical-geometrical copying approach and the design of experiments method (DOE) (številka: 1, 2022)
Machinability analysis and multi-response optimization using NGSA-II algorithm for particle reinforced aluminum based metal matrix composites (številka: 2, 2022)
A bi-objective optimization of airport ferry vehicle scheduling based on heuristic algorithm: a real data case study (številka: 2, 2022)
Ultrasonic abrasive polishing of additive manufactured parts: an experimental study on the effects of process parameters on polishing performance (številka: 2, 2022)
A plant simulation approach for optimal resource utilization: a case study in the tire manufacturing industry (številka: 2, 2022)
A method for prediction of S-N curve of spot-welded joints based on numerical simulation (številka: 2, 2022)
Supply chain coordination contract design: the case of farmer with capital constraints and behavioral preferences (številka: 2, 2022)
Sustainability and digitalisation: using Means-End Chain Theory to determine the key elements of the digital maturity model for research and development organisations with the aspect of sustainability (številka: 2, 2022)
Supply chain coordination based on the probability optimization of target profit (številka: 2, 2022)
Numerical study of racking resistance of timber-made double-skin façade elements (številka: 2, 2022)
Last-mile delivery optimization considering the demand of market distribution methods: a case studies using Adaptive Large Neighborhood Search algorithm (številka: 3, 2022)
Evolutionary game analysis of company collaborative strategy in cloud manufacturing platform environment (številka: 3, 2022)
Experimental determination of influences on a gauge block’s stack length (številka: 3, 2022)
Financing and information sharing in capital-constrained supply chain (številka: 3, 2022)
A new approach for quality prediction and control of multistage production and manufacturing process based on Big Data analysis and Neural Networks (številka: 3, 2022)
Effect of printing parameters on the mechanical behaviour of the thermoplastic polymer processed by FDM technique: a research review (številka: 3, 2022)
Multi-objective Intuitionistic Fuzzy Linear Programming model for optimization of industrial closed-loop supply chain network (številka: 3, 2022)
Modelling surface roughness in finish turning as a function of cutting tool geometry using the response surface method, Gaussian process regression and decision tree regression (številka: 3, 2022)
Study on scheduling and path planning problems of multi-AGVs based on a heuristic algorithm in intelligent manufacturing workshop (številka: 4, 2022)
Cause-related marketing strategy in a supply chain (številka: 4, 2022)
Optimization of the rhomboidity of continuously cast billets using linear regression and genetic programming: A real industrial study (številka: 4, 2022)
An approach to maintenance sustainability level assessment integrated with Industry 4.0 technologies using Fuzzy-TOPSIS: a real case study (številka: 4, 2022)
Impact of Cobot parameters on the worker productivity: Optimization challenge (številka: 4, 2022)
Demand prediction and optimization of workshop manufacturing resources allocation: a new method and a case study (številka: 4, 2022)
Monte Carlo Tree Search improved Genetic Algorithm for unmanned vehicle routing problem with path flexibility (številka: 4, 2022)
End-of-line delivery vehicle routing optimization based on large-scale neighbourhood search algorithms considering customer-consumer delivery location preferences (številka: 4, 2022)
Verification of intelligent scheduling based on deep reinforcement learning for distributed workshops via discrete event simulation (številka: 4, 2022)
Development of a flexible tooling system for sheet metal bending (nr. 3, 2022)

številka: 1 (2023)
številka: 2 (2023)
številka: 3 (2023)
številka: 4 (2023)
Supply chain game analysis based on mean-variance and price risk aversion under different power structures (številka: 1, 2023)
An innovative framework for sustainable and centralized material procurement management based on a full-domain set theory (številka: 1, 2023)
Hierarchical hybrid simulation optimization of the pharmaceutical supply chain (številka: 1, 2023)
Enhancing manufacturing excellence with Lean Six Sigma and zero defects based on Industry 4.0 (številka: 1, 2023)
Design and operations framework for the Twin Transition of manufacturing systems (številka: 1, 2023)
A imatheuristic approach combining genetic algorithm and mixed integer linear programming model for production and distribution planning in the supply chain (številka: 1, 2023)
Spatial position recognition method of semi-transparent and flexible workpieces: a machine vision based on red light assisted (številka: 1, 2023)
A NSGA-II based approach for multi-objective optimization of a reconfigurable manufacturing transfer line supported by Digital Twin: a case study (številka: 1, 2023)
Supply chain engineering (številka: 1, 2023)
An improved discrete particle swarm optimization approach for a multi-objective optimization model of an urban logistics distribution network considering traffic congestion (številka: 2, 2023)
Blockchain-based tripartite evolutionary game study of manufacturing capacity sharing (številka: 2, 2023)
Genetic algorithm-based approach for makespan minimization in a flow shop with queue time limits and skip-ping jobs (številka: 2, 2023)
Enhancing automated defect detection through sequential clustering and classification: a industrial case study using the sine-cosine algorithm, possibilistic fuzzy c-means, and artificial neural network (številka: 2, 2023)
Simulation and genetic algorithm-based approach for multi-objective optimization of production planning: a case study in industry (številka: 2, 2023)
Real-time scheduling for dynamic workshops with random new job insertions by using deep reinforcement learning (številka: 2, 2023)
Engineering-to-order manufacturing: a criticality analysis of key challenges and solutions based on literature review (številka: 2, 2023)
When core sorting and quality grading is beneficial to remanufacturers: Insights from analytical models (številka: 2, 2023)
Hybrid forecasting modelling of cost and time entities for planning and optimizing projects in the die-cast aluminium industry (številka: 2, 2023)
Ranking dominant losses in small and medium-sized enterprises (SMEs) in the context of the lean concept application (številka: 2, 2023)
Project portfolio management in telecommunication company (številka: 3, 2023)
Optimal logistics scheduling with dynamic information in emergency response: case studies for humanitarian objectives (številka: 3, 2023)
An improved multi-objective Wild Horse optimization for the dual-resource-constrained flexible job shop scheduling problem: a comparative analysis with NSGA-II and a real case study (številka: 3, 2023)
A game theory analysis of intelligent transformation and sales mode choice of the logistics service provider (številka: 3, 2023)
An improved deep reinforcement learning approach: a case study for optimisation of berth and yard scheduling for bulk cargo terminal (številka: 3, 2023)
Optimization of machining performance in deep hole boring: a study on cutting tool vibration and dynamic vibration absorber design (številka: 3, 2023)
Factors affecting Quality 4.0 implementation in Czech, Slovak and Polish organizations (številka: 3, 2023)
Impact of agile, condition-based maintenance strategy on cost efficiency of production systems (številka: 3, 2023)
A feed direction cutting force prediction model and analysis for ceramic matrix composites C/SiC based on rotary ultrasonic profile milling (številka: 3, 2023)
Comparing Fault Tree Analysis methods combined with Generalized Grey Relation Analysis: a new approach and case study in the automotive industry (številka: 4, 2023)
Reduction of surface defects by optimization of casting speed using genetic programming (številka: 4, 2023)
Optimizing smart manufacturing systems using digital twin (številka: 4, 2023)
A combined genetic algorithm and A* search algorithm for the electric vehicle routing problem with time windows (številka: 4, 2023)
Incentive modeling analysis in engineering applications and projects with stochastic duration time (številka: 4, 2023)
Dynamic price competition market for retailers in the context of consumer learning behavior and supplier competition: machine learning-enhanced agent-based modeling and simulation (številka: 4, 2023)
IoT-based Deep Learning Neural Network (DLNN) algorithm for voltage stability control and monitoring of solar power generation (številka: 4, 2023)
Optimizing rock breaking performance: the influence of chamfer on polycrystalline diamond compact (PDC) cutters (številka: 4, 2023)

številka: 1 (2024)
številka: 2 (2024)
številka: 3 (2024)
številka: 4 (2024)
An improved multi-objective firefly algorithm for integrated scheduling approach in manufacturing and assembly considering time-sharing step tariff (številka: 1, 2024)
Experimental and numerical investigation of the deep drawing process using a tractrix die – an industrial case study focused on stress and temperature analysis (številka: 1, 2024)
The investigation of production variance in a module-based assembly system: a Markovian arrival process approach (številka: 1, 2024)
Evolutionary game analysis of green innovation in E-commerce closed-loop supply chain WEEE recycling (številka: 1, 2024)
Research on recovery strategies of supply chain network under disruption propagation using memetic algorithm (številka: 1, 2024)
Human-robot collaboration assembly line balancing considering cross-station tasks and the carbon emissions (številka: 1, 2024)
FDM process parameter selection by hybrid MCDM approach for flexural and compression strength maximization (številka: 1, 2024)
Integrated optimization of line planning and timetabling on high-speed railway network considering cross-line operation (številka: 1, 2024)
Current state and production characteristics of the Polish tanning industry: a case study (številka: 2, 2024)
Optimization of reverse logistics network for end-of-life vehicles: a Shanghai case study (številka: 2, 2024)
Flexible job-shop scheduling problem with parallel operations using reinforcement learning: a approach based on heterogeneous graph attention networks (številka: 2, 2024)
A modified bi-objective NSGA-II approach to sustainability in reconfiguration planning of dynamic cellular manufacturing systems (številka: 2, 2024)
Impact of fairness concerns on resource-sharing decisions: a comparative analysis using evolutionary game models in manufacturing enterprises (številka: 2, 2024)
Simulation analysis of dual-end queuing ride-hailing system considering driver-side queue management (številka: 2, 2024)
Characterizing the effects of SiC and Alsub2Osub3 on the mechanical properties of Al6082 hybrid metal matrix composites: a experimental and neural network approach (številka: 2, 2024)
Unsupervised machine learning application in the selection of measurement strategy on Coordinate Measuring Machine (številka: 2, 2024)
Enhancing workplace safety and ergonomics with motion capture systems: Present state and a case study (številka: 3, 2024)
Dynamic scheduling for manufacturing workshops using digital twins, competitive particle swarm optimization, and siamese neural networks (številka: 3, 2024)
Enhancing calibration accuracy with laser interferometry for high-resolution measuring systems (številka: 3, 2024)
Machine learning for enhancing manufacturing quality control in ultrasonic nondestructive testing: a wavelet neural network and genetic algorithm approach (številka: 3, 2024)
Optimizing obstacle avoidance path planning for intelligent mobile robots in multi-obstacle environments (številka: 3, 2024)
Improved Whale Optimization Algorithm for supply chain financial risk assessment of cloud warehouse platform (številka: 3, 2024)
Modelling and optimization of dimensional accuracy and surface roughness in dry turning of Inconel 625 alloy (številka: 3, 2024)
Optimization of cold chain multimodal transportation routes considering carbon emissions under hybrid uncertainties (številka: 3, 2024)
Reducing scrap in long rolled round steel bars using Genetic Programming after ultrasonic testing (številka: 4, 2024)
A bi-objective Genetic Algorithm for flexible flow shop scheduling: a real-world application in the electrical industry (številka: 4, 2024)
Sustainable design of products: balancing quality, life cycle impact, and social responsibility (številka: 4, 2024)
Integrating simulation modelling for sustainable, human-centred Industry 5.0: ESG-based evaluation in collaborative workplaces (številka: 4, 2024)
Optimizing electric vehicle charging strategies using multi-layer perception-based spatio-temporal prediction of charging station loading (številka: 4, 2024)
Integrated production and maintenance policy for manufacturing systems prone to products' quality degradation (številka: 4, 2024)
An algorithmic review of the technological progress and milestones in resource-constrained project planning (številka: 4, 2024)
A comparative study of machine learning regression models for production systems condition monitoring (nr. 1, 2024)
Predicting the deep drawing process of TRIP steel grades using multilayer perceptron artificial neural networks (nr. 1, 2024)
Optimization of reliability and speed of the end-of-line quality inspection of electric motors using machine learning (nu. 2, 2024)

številka: 1 (2025)
številka: 2 (2025)
številka: 3 (2025)
številka: 4 (2025)
Analysis and optimization of micro-milling parameters for improving part quality in ultrafine graphite with varying workpiece inclination angles (številka: 1, 2025)
From zero to one: a new perspective on the fuzzy front end of innovation and the Stage-Gate® model (številka: 1, 2025)
Reinforcement learning for robot manipulation tasks in human-robot collaboration using the CQL/SAC algorithms (številka: 1, 2025)
Enhancing racking stiffness in tall timber buildings using double-skin façades (številka: 1, 2025)
Privacy-preserving AI-based framework for container transportation demand forecasting in sea-rail intermodal systems (številka: 1, 2025)
Closed-loop simulation of workload control (številka: 1, 2025)
Enhancing aerospace products quality with ISOMAP key factor identification (številka: 1, 2025)
Configuring supply chain governance and digital capabilities for resilience (številka: 1, 2025)
Optimizing emergency home healthcare scheduling with improved Quantum-behaved Particle Swarm Optimization (številka: 2, 2025)
An optimized production assignment algorithm for custom-made garments (številka: 2, 2025)
A transfer learning approach to machine learning-based end-of-line quality inspection (številka: 2, 2025)
Enhanced product defect forecasting using partitioned attributes and ensemble machine learning (številka: 2, 2025)
Large language models for G-code generation in CNC machining: A comparison of ChatGPT-3.5 and ChatGPT-4o (številka: 2, 2025)
Impact of machining parameters on surface roughness in CNC hardwood milling: A multivariate approach (številka: 2, 2025)
A multi-objective approach for optimizing emergency material locations in natural disasters (številka: 2, 2025)
Low-carbon multimodal vehicle logistics route optimization with timetable limit using Particle Swarm Optimization (številka: 2, 2025)
Golden drop algorithm: a water wave and golden ratio inspired novel metaheuristic for global optimization (številka: 3, 2025)
Manufacturing process quality prediction via temporal knowledge graph reasoning with adaptive multi-scale temporal path fusion and self-attention mechanism (številka: 3, 2025)
Two-echelon drone–truck collaborative TSP-based routing for humanitarian logistics with time windows and stochastic demand (številka: 3, 2025)
Precision blade manufacturing: small-sample prediction and optimization using improved meta-learning and Particle Swarm Optimization (številka: 3, 2025)
Optimizing abrasive water jet milling of alumina ceramics with RBF neural networks (številka: 3, 2025)
Dynamic Harris Hawks optimization and deep reinforcement learning framework for autonomous vehicle path planning (številka: 3, 2025)
Improving AGV path planning efficiency using Genetic Algorithms with Hamming distance-based initialization (številka: 3, 2025)
Optimizing cooperation strategies for new energy vehicle manufacturers and technology suppliers: A game theory approach (številka: 3, 2025)
A multi-objective feature selection and self-paced ensemble framework for semiconductor defect detection (številka: 4, 2025)
How competitive pressures and technological innovations shape organizational practices: insights from the European manufacturing survey (številka: 4, 2025)
The most commonly used Industry 4.0 technologies in manufacturing: a systematic literature review (številka: 4, 2025)
Using large language models (LLMs) to support simulation-based optimization in supply chain management (številka: 4, 2025)
Tripartite evolutionary game analysis of the adoption of AI delivery technology (številka: 4, 2025)
Measuring the coordinated development of the advanced manufacturing cluster based on patent data: A composite system approach (številka: 4, 2025)
Independent vs. collaborative blockchain research and development (številka: 4, 2025)
Mass customization in practice (številka: 4, 2025)
Influence of cutting-edge tip geometry on the tool–workpiece electrical contact resistance (številka: 4, 2025)
Synergistic effects of biomass and coal dust co-combustion on explosion safety (številka: 4, 2025)

številka: 1 (2026)
številka: 2 (2026)