dLib.si - Parametri

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint

Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)

Identification of the material parameters of a unidirectional fiber composite using a micromodel

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (792 kB)

1. TXT document (30 kB)

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

Influence of the process parameters on high-velocity oxygen-fuel-sprayed 75Cr3C2-25NiCr coatings

Contibutors: Nagulan, BalaGanesh (author) / Thamilkolundu, SenthilKumar (author) / Murugesan, Chandrasekar (author)

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Computer tools to determine physical parameters in wooden houses

Contibutors: Bečkovský, David (author) / Vajkay, František (author) / Tichomirov, Vladimír (author)

Dimensional errors in selective laser melting products related to different orientations and proc...

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (604 kB)

1. TXT document (17 kB)

Contibutors: Pal, Snehashis (author) / Kokol, Vanja (author) / Gubeljak, Nenad (author) / Hadžistević, Miodrag (author) / Hudak, Radovan (author) / Drstvenšek, Igor (author)

1. PDF document (1144 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Izračun parametrov Weibullove porazdelitve za oceno upogibne trdnosti valovitih strešnih plošč

Contibutors: Ambrožič, Milan (author) / Vidović, Krunoslav (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (147 kB)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Micromechanical model of the substituents of a unidirectional fiber-reinforced composite and its ...

Contibutors: Kroupa, Tomáš (author) / Srbová, Hana (author) / Zemčík, Robert (author)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (751 kB)

Effect of tool geometry and welding parameters on the microstructure and static strength of the f...

Contibutors: Abedini, Omid (author) / Ranjbarnodeh, Eslam (author) / Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (3418 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of cutting parameters on the drilling of AlSi7 metallic foams

Contibutors: Uzun, Gultekin (author) / Gokmen, Ugur (author) / Cinici, Hanifi (author) / Turker, Mehmet (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (924 kB)

Effects of technological parameters on the morphological, microstructural and mechanical behavior...

Contibutors: Li, Wen (author) / Sheng, Lei (author) / Xia, Yuanhao (author) / Amirfazli, Alidad (author) / Lu, Yalin (author)

1. PDF document (3340 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Multi-parameter surface-quality analysis

Contibutors: Kubišová, Milena (author) / Pata, Vladimír (author) / Sýkorová, Libuše (author) / Hýlová, Lenka (author) / Šuba, Oldřich (author)

1. PDF document (2213 kB)

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (13 kB)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Contibutors: Akkuş, Harun (author)

The transferability of fracture-mechanics parameters to fracture performance evaluation of welds ...

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

1. TXT document (22 kB)

Contibutors: Toyoda, Masao (author) / Praunseis, Zdravko (author)

Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (803 kB)

1. TXT document (36 kB)

Contibutors: Çelik, Yahya Hişman (author)

1. PDF document (1441 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of mechanical-alloying parameters on the structure and properties of Cu47Ti34Zr11Ni8

Contibutors: Nowosielski, Ryszard (author) / Guwer, Aleksandra (author) / Matus, Krzysztof (author)

1. PDF document (3372 kB)

Numbering: 2020, volume 54, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Tensile properties of cold-drawn low-carbon steel wires under different process parameters

Contibutors: Çetinarslan, Cem S. (author) / Güzey, Ali (author)

Integrated statistical methodology for optimizing the machining parameters in SiC powder mixed - ...

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (760 kB)

1. TXT document (30 kB)

Contibutors: Modi, Manoj (author) / Agarwal, Gopal (author)

1. PDF document (1477 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

A generalized theory of plasticity

Contibutors: Chygyryns'kyy, Valeryy Victorovich (author) / Kachan, Aleksey Yakovlevich (author) / Mamuzić, Ilija (author) / Ben', Anna Nikolaevna (author)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Numbering: 2010, volume 44, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

1. TXT document (18 kB)

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

Influence of the tool geometry and process parameters on the static strength and hardness of fric...

Contibutors: Güler, Hande (author)

Comparison of homogenization approaches used for the identification of the material parameters of...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (561 kB)

1. TXT document (16 kB)

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Lukeš, Vladimir (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (936 kB)

Identification and verification of the composite material parameters for the Ladeveze damage model

Contibutors: Kleisner, Václav (author) / Zemčík, Robert (author) / Kroupa, Tomáš (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (457 kB)

Application of the Taguchi method to select the optimum cutting parameters for tangential cylindr...

Contibutors: Ozay, Cetin (author) / Ballikaya, Hasan (author) / Savas, Vedat (author)

The effect of the welding parameters and the coupling agent on the welding of composites

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (812 kB)

1. TXT document (34 kB)

Contibutors: Erdogan, Ertugrul Selcuk (author) / Huner, Umit (author)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

Material parameters for a numerical simulation of a compaction process for sintered double-height...

Contibutors: Verlak, Tomaž (author) / Šori, Marko (author) / Glodež, Srečko (author)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (865 kB)

Physical regularities in the cracking of nanocoatings and a method for an automated determination...

Contibutors: Maruščak, P. O. (author) / Gliha, Vladimir (author) / Konovalenko, Igor (author) / Vuherer, Tomaž (author) / Panin, Sergey (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (262 kB)

Effect of the tool geometry and welding parameters on the macrostructure, fracture mode and weld ...

Contibutors: Bilici, Mustafa Kemal (author) / Yükler, Ahmet Ýrfan (author) / Kastan, Alim (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (860 kB)

Optimization of the machining parameters in the electrochemical micro-machining of nickel

Contibutors: Krishnan, Rajendiran (author) / Duraisamy, Saravanan (author) / Palanisamy, Parthiban (author) / Veeramani, Anandakrishnan (author)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (503 kB)

Small-punch testing of a weld´s heat-affected zones

Contibutors: Šturm, Roman (author) / Li, Yingzhi (author)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (555 kB)

Weldability of metal matrix composite plates by friction stir welding at low welding parameters

Contibutors: Bozkurt, Yahya (author)

Influence of process parameters on the corrosion resistance of corrugated austenitic and duplex s...

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (551 kB)

1. TXT document (24 kB)

Contibutors: Alvarez M., Sandra (author) / Bautista, Asunción (author) / Velasco, F. (author)

Influence of weld-process parameters on the material characterization of the friction-stir-welded...

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (796 kB)

1. TXT document (22 kB)

Contibutors: Patil, Hiralal (author) / Soman, Sanjay (author)

1. PDF document (1876 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...

Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)

1. PDF document (1238 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Changes in the composite structure and parameters after an exposure to a synergic action of vario...

Contibutors: Melichar, Tomáš (author) / Dufka, Ámos (author) / Bydžovský, Jiří (author)

1. PDF document (2832 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Use of larson-miller parameter for modeling the progress of isothermal solidification during tran...

Contibutors: Pouranvari, Majid (author) / Mousavizadeh, Seyed Mostafa (author)

Predicting the microstructure evolution for the warm skew rolling of bearing steel balls under di...

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (855 kB)

1. TXT document (18 kB)

Contibutors: Huo, Yuanming (author) / He, Tao (author) / Hu, Yujia (author) / Shen, Menglan (author) / Sun, Bo (author) / Zhao, Tong (author)

1. PDF document (4072 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the processing parameters on the microstructure and properties of the ZL116 aluminium a...

Contibutors: Pan, Tingting (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Yu, Kuanping (author) / Sun, Anna (author)

1. PDF document (1446 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Primerjava sočasnih meritev elektrokemijskega šuma in mehanskih parametrov med procesi napetostno...

Contibutors: Bajt Leban, Mirjam (author) / Doleček, Valter (author) / Legat, Andraž (author) / Kuhar, Viljem (author)

1. PDF document (1303 kB)

Numbering: 2000, volume 34, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the process parameters of friction-welded St-Al joints

Contibutors: Sahin, Mumin (author) / Misirli, Cenk (author) / Selvi, Selcuk (author)

1. PDF document (3412 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of process parameters on the mechanical properties of friction-stir-welded joints o...

Contibutors: Milčić, Miodrag (author) / Vuherer, Tomaž (author) / Radisavljević, Igor (author) / Milčić, Dragan (author) / Kramberger, Janez (author)

1. PDF document (1258 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Determination of the cause of the formation of transverse internal cracks on a continuously cast ...

Contibutors: Franěk, Zdeněk (author) / Masarik, Miloš (author) / Šmíd, Jaromír (author)

Experimental study and analysis of the wear properties of friction-stir-welded AA7075-T6 and A384...

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (545 kB)

1. TXT document (29 kB)

Contibutors: Anganan, Karuppannan (author) / Prabagaran, Subramaniam (author) / Muthukrishnan, Mayakrishnan (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (19 kB)

Effect of sintering parameters on the density, microstructure and mechanical properties of the ni...

Contibutors: Butković, Samir (author) / Oruč, Mirsada (author) / Šarić, Emir (author) / Mehmedović, Muhamed (author)

Effects of solidification parameters on the micro- and macrostructure of the X19CrMoVNbN11-1 steel

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (216 kB)

1. TXT document (24 kB)

Contibutors: Koležnik, Mitja (author) / Nagode, Aleš (author) / Klančnik, Grega (author) / Medved, Jože (author) / Janet, Bernarda (author) / Bizjak, Milan (author) / Kosec, Ladislav (author)

1. PDF document (2504 kB)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Predictive model and optimization of processing parameters for plastic injection moulding

Contibutors: Kramar, Davorin (author) / Cica, Djordje (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)

1. PDF document (1870 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of process parameters on the microstructure and mechanical properties of friction-welded j...

Contibutors: Kirik, Ihsan (author) / Özdemir, Niyazi (author)

1. PDF document (2301 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of geometric parameters of a pin joint of a carbon/epoxy composite plate on its load ca...

Contibutors: Krystek, Jan (author) / Bek, Lukáš (author) / Kroupa, Tomáš (author) / Kottner, Radek (author)

Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the GRA-Ta...

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (489 kB)

1. TXT document (11 kB)

Contibutors: Kolli, Murahari (author) / Adepu, Kumar (author)

Effects of processing parameters on the microstructure and mechanical properties of Al-Si-Cu allo...

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (730 kB)

1. TXT document (48 kB)

Contibutors: Yu, Kuanping (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Pan, Tingting (author) / Dong, Xingqian (author)

1. PDF document (2514 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Injection of brown-coal tar in a statistical relationship with the significant parameters of a bl...

Contibutors: Pustějovská, Pavlína (author) / Jursová, Simona (author) / Brožová, Silvie (author) / Pivko, Michal (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (160 kB)

The effect of a superplasticizer admixture on the mechanical fracture parameters of concrete

Contibutors: Šimonová, Hana (author) / Havlíková, Ivana (author) / Daněk, Petr (author) / Keršner, Zbyněk (author) / Vymazal, Tomáš (author)

Fatigue-crack propagation near a threshold region in the framework of two-parameter fracture mech...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (908 kB)

1. TXT document (20 kB)

Contibutors: Seitl, Stanislav (author) / Hutař, Pavel (author)

Optimization of the drilling parameters for the cutting forces in B4C-reinforced Al-7XXX-series a...

Numbering: 2007, volume 41, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (203 kB)

1. TXT document (17 kB)

Contibutors: Taşkesen, Ahmet (author) / Kütükde, Kenan (author)

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (596 kB)

Influence of the process parameters and the mechanical properties of aluminum alloys on the burr ...

Contibutors: Köglü, Ugur (author)

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (186 kB)

Sintered board materials based on recycled glass

Contibutors: Melichar, Tomáš (author) / Bydžovský, Jiří (author)

1. PDF document (1706 kB)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Significance of the radiographic parameters in the diagnosis and treatment of a bony impingement ...

Contibutors: Meglič, Uroš (author) / Zupanc, Oskar (author)

Determination of the optimal cutting parameters for machining technical plastics

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (189 kB)

1. TXT document (17 kB)

Contibutors: Mošorinski, Predrag (author) / Prvulović, Slavica (author) / Josimović, Ljubiša (author)

1. PDF document (1069 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Optimizing the parameters for friction welding stainless steel to copper parts

Contibutors: Sahin, Mumin (author)

1. PDF document (2239 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Cold-cathode ionization gauge - preprocessing and modelling of the gauge parameters using neural ...

Contibutors: Irmančnik-Belič, Lidija (author) / Belič, Igor (author) / Erjavec, Bojan (author) / Šetina, Janez (author)

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (145 kB)

Machining parameters influencing in electro chemical machining on AA6061 MMC

Contibutors: Chentil Jegan, Thankaraj Mariapushpam (author) / Ravindran, Durairaj (author) / Dev Anand, M. (author)

Determination of the mechanical parameters of a bonded joint between a metal and a composite by c...

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (614 kB)

1. TXT document (44 kB)

Contibutors: Bernardin, Petr (author) / Vacík, Josef (author) / Kroupa, Tomáš (author) / Kottner, Radek (author)

1. PDF document (1021 kB)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Investigating the effects of cutting parameters on the built-up-layer and built-up-edge formation...

Contibutors: Bilgin, Mehmet Burak (author)

1. PDF document (1240 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Increasing micro-purity and determining the effects of the production with and without vacuum ref...

Contibutors: Kurka, Vladislav (author) / Pindor, Jaroslav (author) / Kosňovská, Jana (author) / Adolf, Zdeněk (author)

1. PDF document (2651 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of multi-process parameters according to the surface quality criteria in the end mil...

Contibutors: Durmuş, Hülya (author)

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (498 kB)

Analysis of process parameters for a surface-grinding process based on the Taguchi method

Contibutors: Külekci, Mustafa Kemal (author)

Parameter PVlim kot merilo za ovrednotenje materialov tesnilnih obročev v mehanskih drsnih tesnilih

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

1. TXT document (19 kB)

Contibutors: Vezjak, Anton (author) / Vižintin, Jožef (author) / Oberžan, Martina (author)

Numbering: 2000, volume 34, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (289 kB)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Effects of variations in alloy content and machining parameters on the strength of the intermetal...

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

1. TXT document (39 kB)

Contibutors: Acar, Ahu Fahriye (author) / Ozturk, Fahrettin (author) / Bayrak, Mustafa (author)

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (441 kB)

Prediction of superconducting transition temperature using a machine-learning method

Contibutors: Liu, Yao (author) / Zhang, Huiran (author) / Xu, Yan (author) / Li, Shengzhou (author) / Dai, Dongbo (author) / Li, Chengfan (author) / Ding, Guangtai (author) / Shen, Wenfeng (author) / Qian, Quan (author)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (385 kB)

Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...

Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)

1. PDF document (1860 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge ...

Contibutors: Perović, Milenko A. (author) / Veljić, Darko (author) / Rakin, Marko (author) / Radović, Nenad (author) / Sedmak, Aleksandar (author) / Bajic, Nikola (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (617 kB)

Effect of the GMAW metal-transfer mode on the weld-metal structure of HSLA X80

Contibutors: Jurica, Maja (author) / Kožuh, Zoran (author) / Bauer, Branko (author) / Garašić, I. (author)

1. PDF document (1150 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

WEDM cutting of Inconel 718 nickel-based superalloy: effects of cutting parameters on the cutting...

Contibutors: Çaydaş, Ulaş (author) / Ay, Mustafa (author)

1. PDF document (3747 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Effects of fabrication parameters on the oxidation resistance of wood/phenolic resin carbon compo...

Contibutors: Tao, Yubo (author) / Li, Peng (author)

1. PDF document (1335 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Problems associated with a robot laser cell used for hardening

Contibutors: Babič, Matej (author) / Milfelner, Matjaž (author) / Belič, Igor (author) / Kokol, Peter (author)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (413 kB)

Artificial-neural-network prediction of hexagonal lattice parameters for non-stoichiometric apatites

Contibutors: Kockan, Umit (author) / Ozturk, Fahrettin (author) / Evis, Zafer (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

Void-closure behavior and a new void-evolution model for various stress states

Contibutors: Chen, Fei (author) / Zhao, Xiaodong (author) / Chen, Huiqin (author) / Ren, Jinyu (author)

1. PDF document (3487 kB)

Numbering: 2021, volume 55, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Influence of design parameters of a polypropylene hollow-fibre heat exchanger on its thermal perf...

Contibutors: Čarnogurská, Mária (author) / Příhoda, Miroslav (author) / Gallik, Róbert (author)

Numbering: 2020, volume 54, iss. 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (977 kB)

Multi-objective optimization of the resistance spot-welding process parameters for the welding of...

Contibutors: Djuric, Aleksija (author) / Milčić, Dragan (author) / Klobčar, Damjan (author) / Marković, Biljana (author)

1. PDF document (2770 kB)

Numbering: 2021, volume 55, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Process-parameter optimization of WEDM with Inconel 825 alloy using GRA

Contibutors: Subburaj, Arulselvan (author) / Ravindran, Durairaj (author) / Decruz, Arul Marcel Moshi Antony Joseph (author) / Dharmaraj, Vignesh Kumar (author)

1. PDF document (4090 kB)

Numbering: 2021, volume 55, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of initial shear stress and vibration frequency on the dynamic strength characteristics o...

Contibutors: Zhang, Jian (author) / Sun, Yangguang (author) / Cao, Jiuting (author) / Shi, Baocun (author)

1. PDF document (3712 kB)

Numbering: 2022, volume 56, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Hard machining of P235GH steel with different parameters using GSRS modelling

Contibutors: Esther, Edwin Paul Nelson (author) / Ramalingam, Adalarasan (author) / Muthuvel, Santhanakumar (author)

1. PDF document (3425 kB)

Numbering: 2022, volume 56, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Predicting the optimal parameters by multi-objective decision making while machining an Al6061 al...

Contibutors: Sushma, I Sri Phani (author) / Samuel, G. L. (author) / Varga, Gyula (author)

1. PDF document (1058 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of process parameters for a solid-state-welded AlSl 430 steel joint with the GRG rei...

Contibutors: Senthilkumar, G. (author) / Vinodkumar, V. (author) / Mayavan, T. (author) / Rathinasabapathi, G. (author) / David, Amos Gamaleal (author)

1. PDF document (2319 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Effect of electrochemical process parameters on the Hastelloy C-276 alloy for machining speed and...

Contibutors: Venugopal, P. (author) / Arul, Thayammal Ganesan (author) / Selvam, V. (author) / Saranya, K. (author)

1. PDF document (2926 kB)

Numbering: 2023, volume 57, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Numerical model for optimizing the parameters for laser-beam welding of a high-temperature material

Contibutors: Palanivel, Ramaswamy (author) / Thiyagarajan, Muthu Krishnan (author) / Alqurashi, Yousef (author) / Rasheed, Mohammad Abdur (author)

1. PDF document (4476 kB)

Numbering: 2024, volume 58, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Studying the strength of dissimilar joints of AISI 430 and 301 stainless steel welded at differen...

Contibutors: Aras, Sedat (author) / Ertan, Rukiye (author)

1. PDF document (1625 kB)

Numbering: 2024, volume 58, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Research status and prospects for TIG-MIG hybrid-arc-welding technology

Contibutors: Li, Yinghao (author) / Zong, Ran (author) / Zhang, Yujiao (author) / Yao, Jingzhuo (author)