dLib.si - search results

Assessing the stress fields in an injection-moulded undercut geometry during ejection supported b...

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

1. TXT document (17 kB)

Contibutors: Florjanič, Blaž (author) / Božič, Uroš (author) / Zafošnik, Boštjan (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (265 kB)

Chromite spinel formation in steelmaking slags

Contibutors: Burja, Jaka (author) / Tehovnik, Franc (author) / Medved, Jože (author) / Godec, Matjaž (author) / Knap, Matjaž (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (616 kB)

Estimation of the boron diffusion coefficients in FeB and Fe2B layers during the pack-boriding of...

Contibutors: Abdellah, Zahra Nait (author) / Keddam, Mourad (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

Structural, mechanical and cytotoxicity characterization of as-cast biodegradable Zn-xMg (x = 0.8...

Contibutors: Kubásek, Jiří (author) / Pospíšilová, Iva (author) / Vojtěch, Dalibor (author) / Jablonská, Eva (author) / Ruml, Tomáš (author)

1. PDF document (2038 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Development of low-Si aluminum casting alloys with an improved thermal conductivity

Contibutors: Shin, Jesik (author) / Ko, Sehyun (author) / Kim, Kitae (author)

Long-term durability properties of pozzolanic cement mortars

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (392 kB)

1. TXT document (36 kB)

Contibutors: Završnik, Lina (author) / Strupi-Šuput, Jerneja (author) / Kramar, Sabina (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (560 kB)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Thermodynamic characterization of multiphase non-metallic inclusions in re-sulphurised steel grades

Contibutors: Krajnc, Luka (author) / Mrvar, Primož (author) / Medved, Jože (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (443 kB)

Effect of isothermal annealing on the magnetic properties of cold-rolled low-carbon steel with ma...

Contibutors: Ansaripour, Amir (author) / Zadeh, Hossein Monajati (author) / Amighian, Jamshid (author)

1. PDF document (1669 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy u...

Contibutors: Tolga Ozkan, Murat (author) / Ulas, Hasan Basri (author) / Bilgin, Musa (author)

DSC/TG of Al-based alloyed powders for p/m applications

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

1. TXT document (38 kB)

Contibutors: Šuštaršič, Borivoj (author) / Medved, Jože (author) / Glodež, Srečko (author) / Šori, Marko (author) / Korošec, Albert (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

Numerical model of a composite airfoil segment with piezoelectric sensors

Contibutors: Bartošek, Jan (author) / Kroupa, Tomáš (author) / Smolík, Luboš (author)

Transformation-induced plasticity in steel for hot stamping

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (320 kB)

1. TXT document (16 kB)

Contibutors: Mašek, Bohuslav (author) / Štádler, Ctibor (author) / Jirková, Hana (author) / Feuser, Peter (author) / Selig, Mike (author)

Regression analysis of the influence of a chemical composition on the mechanical properties of th...

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (243 kB)

1. TXT document (14 kB)

Contibutors: Gigović-Gekić, Almaida (author) / Oruč, Mirsada (author) / Avdušinović, Hasan (author) / Sunulahpašić, Raza (author)

Comparison of the corrosion behaviour of austenitic stainless steel in seawater and in a 3.5 % Na...

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (577 kB)

1. TXT document (17 kB)

Contibutors: Donik, Črtomir (author) / Kocijan, Aleksandra (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (344 kB)

Relationship between a bainitic structure and the hardness in the weld zone of the friction-stir ...

Contibutors: Aydin, Hakan (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (623 kB)

Multiple regression modeling and prediction of the surface roughness in the WEDM process

Contibutors: Kulekci, Mustafa Kemal (author) / Akkurt, Adnan (author) / Esme, Ugur (author) / Ozkul, Iskender (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (308 kB)

Microstructures of the Al-Fe-Cu-X alloys prepared at various solidification rates

Contibutors: Voděrová, Milena (author) / Novák, Pavel (author) / Průša, Filip (author) / Vojtěch, Dalibor (author)

1. PDF document (2512 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Thermomechanical treatment of Ti-Nb-V-B micro-alloyed steel forgings

Contibutors: Opiela, Marek (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (300 kB)

Model antimicrobial polymer system based on poly(vinyl chloride) and crystal violet

Contibutors: Klofáč, Jiří (author) / Kuřitka, Ivo (author) / Bažant, Pavel (author) / Jedličková, Kristýna (author) / Sedlák, Jakub (author)

Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (622 kB)

1. TXT document (35 kB)

Contibutors: Çelik, Yahya Hişman (author)

1. PDF document (1441 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Corrosion properties of different forms of carbon steel in simulated concrete pore water

Contibutors: Česen, Aleš (author) / Kosec, Tadeja (author) / Legat, Andraž (author) / Bokan-Bosiljkov, Violeta (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (526 kB)

Tribology of CrAg7N coatings deposited on Vanadis 6 ledeburitic tool steel

Contibutors: Bílek, Pavel (author) / Jurči, Peter (author) / Hudáková, Mária (author) / Čaplovič, L'ubomír (author) / Novák, Michal (author)

1. PDF document (2594 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Characterization of a polymer-matrix composite support beam

Contibutors: Štrekelj, Neva (author) / Maren, Matevž (author) / Naglič, Iztok (author) / Demšar, Andrej (author) / Dervarič, Evgen (author) / Markoli, Boštjan (author)

1. PDF document (1239 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Spin-coating for optical-oxigen-sensor preparation

Contibutors: Brglez, Polonca (author) / Holobar, Andrej (author) / Pivec, Aleksandra (author) / Kolar, Mitja (author)

Characterization of the substrates from two cultural-heritage sites and a preparation of model su...

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (256 kB)

1. TXT document (32 kB)

Contibutors: Kramar, Sabina (author) / Ducman, Vilma (author) / Vucetic, Snezana (author) / Velkavrh, Edo (author) / Radeka, Miroslava (author) / Ranogajec, Jonjaua (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (403 kB)

Wear behavior of Al/SiC/graphite and Al/FeB/graphite hybrid composites

Contibutors: Şahin, Salim (author) / Yüksel, Nilay (author) / Durmuş, Hülya (author) / Gençalp Irizalp, Simge (author)

1. PDF document (5039 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Comparison of NiTi orthodontic archwires and a determination of the charasteristic properties

Contibutors: Ferčec, Janko (author) / Kos, Matija (author) / Brunčko, Mihael (author) / Anžel, Ivan (author) / Glišić, Branislav (author) / Marković, Evgenija (author) / Rudolf, Rebeka (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

Synthesis and characterization of Al foams produced by powder metallurgy route using dolomite and...

Contibutors: Paulin, Irena (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (457 kB)

Finite element modelling of submerged arc welding process for a symmetric T-beam

Contibutors: Culha, Osman (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (256 kB)

Thermomechanical processing of micro-alloyed steel

Contibutors: Podaný, Pavel (author) / Martinek, Petr (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (511 kB)

Accelerated carbide spheroidisation and refinement (ASR) of the C45 steel during controlled rolling

Contibutors: Hauserova, Daniela (author) / Dlouhý, Jaromír (author) / Nový, Zbyšek (author)

1. PDF document (2102 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Quantification of the copper phase(s) in Al-5Si-(1-4)Cu alloys using a cooling curve analysis

Contibutors: Djurdjevic, Mile B. (author) / Manasijević, Srećko (author) / Odanović, Zoran (author) / Dolić, Natalija (author) / Radiša, Radomir (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (341 kB)

Effect of different surface-heat-treatment methods on the surface properties of AISI 4140 steel

Contibutors: Ayday, Aysun (author) / Durman, Mehmet (author)

A modified heat treatment to improve the properties of double-layer cast rolls

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (886 kB)

1. TXT document (14 kB)

Contibutors: Sedlaček, Marko (author) / Podgornik, Bojan (author) / Milanović, Slobodan (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (589 kB)

Evaluation of the slag regime and desulphurization of steel with synthetic slag containing Cr2O3

Contibutors: Socha, Ladislav (author) / Bažan, Jiří (author) / Morávka, Jan (author) / Styrnal, Petr (author) / Machovčák, Pavel (author) / Opler, Aleš (author) / Trefil, Antonín (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (281 kB)

Application of a neural network for estimating the crack formation and propagation in sol-gel CeO...

Contibutors: Savran, Aydogan (author) / Alci, Musa (author) / Yildirim, Serdar (author) / Yigit, Recep (author) / Çelik, Erdal (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (987 kB)

Interfacial tension at the interface of a system of molten oxide and molten steel

Contibutors: Rosypalová, Silvie (author) / Dudek, Rostislav (author) / Dobrovská, Jana (author) / Dobrovský, Ludovít (author) / Žaludová, Monika (author)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (225 kB)

Microstructure characteristics of the Al-w(Cu) 4.5 % model alloy

Contibutors: Šuštaršič, Borivoj (author) / Jenko, Monika (author) / Šarler, Božidar (author)

1. PDF document (3120 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Machinability of a Ti-6Al-4V alloy with cryogenically treated cemented carbide tools

Contibutors: Mavi, Ahmet (author) / Korkut, Ihsan (author)

Effect of the tool geometry and welding parameters on the macrostructure, fracture mode and weld ...

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (899 kB)

1. TXT document (16 kB)

Contibutors: Bilici, Mustafa Kemal (author) / Yükler, Ahmet Ýrfan (author) / Kastan, Alim (author)

Surface modification of polymer polyethylene terephthalate with plasmas created in different gases

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (860 kB)

1. TXT document (32 kB)

Contibutors: Recek, Nina (author) / Vesel, Alenka (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (273 kB)

Optimization of the mechanical and tribological properties of extruded AMCs

Contibutors: Shabani, Mohsen Ostad (author) / Tofigh, Ali Asghar (author) / Rahimipour, Mohammad Reza (author) / Razavi, Mansour (author) / Mazahéri, Aly (author) / Heydari, Fatemeh (author)

Optimization of the turning parameters for the cutting forces in the Hastelloy X superalloy based...

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (350 kB)

1. TXT document (36 kB)

Contibutors: Altin, Abdullah (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (230 kB)

Mini-thixoforming of various modified states of the stock structure of tool steel X210Cr12

Contibutors: Mašek, Bohuslav (author) / Vančura, Filip (author) / Jirková, Hana (author) / Böehme, Marcus (author) / Frint, Philipp (author)

1. PDF document (1320 kB)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Possibilities for increasing the purity of steel in production using secondary-metallurgy equipment

Contibutors: Korbáš, Martin (author) / Čamek, Libor (author) / Raclavský, Milan (author)

1. PDF document (1837 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Electric-arc-furnace productivity optimization

Contibutors: Stopar, Klemen (author) / Kovačič, Miha (author) / Kitak, Peter (author) / Pihler, Jože (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (214 kB)

Possibilities for eliminating a larger amount of iron in the secondary AlSi6Cu4 alloy with chrome

Contibutors: Bolibruchová, Dana (author) / Richtárech, Lukáš (author) / Macko, Jozef (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (424 kB)

Microstructure of rapidly solidified and hot-pressed Al-Fe-X alloys

Contibutors: Voděrová, Milena (author) / Novák, Pavel (author) / Vojtěch, Dalibor (author)

1. PDF document (2510 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure characteristics of the model spring steel 51CrV4

Contibutors: Torkar, Matjaž (author) / Tehovnik, Franc (author) / Arh, Boštjan (author) / Jenko, Monika (author) / Šarler, Božidar (author) / Rajić, Žarko (author)

1. PDF document (1505 kB)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Synthesis and characterization of metallic-intermetallic Ti-TiAl3, Nb-Ti-TiAl3 composites produce...

Contibutors: Yener, Tuba (author) / Zeytin, Sakin (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (325 kB)

Effect of tunneling defects on the joint strength efficiency obtained with FSW

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

Tribological behavior and characterization of borided cold-work tool steel

Contibutors: Gunes, Ibrahim (author)

1. PDF document (3201 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Wear resistance and dynamic fracture toughness of hypoeutectic high-chromium white cast iron allo...

Contibutors: Filipović, Mirjana (author) / Kamberović, Željko (author) / Korać, Marija (author) / Anđić, Zoran (author)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (904 kB)

Topmost steel production design based on through process modelling with artificial neural networks

Contibutors: Kodelja, Tadej (author) / Grešovnik, Igor (author) / Vertnik, Robert (author) / Šarler, Božidar (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (344 kB)

Pressing of partially oxide-dispersion-strengthened Copper using the ECAP process

Contibutors: Kos, Matija (author) / Ferčec, Janko (author) / Brunčko, Mihael (author) / Rudolf, Rebeka (author) / Anžel, Ivan (author)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (957 kB)

Optimization of the recycling processes for magnesium from a highly contaminated waste

Contibutors: Manojlović, Vaso (author) / Kamberović, Željko (author) / Sokić, Miroslav (author) / Gulišija, Zvonko (author) / Matković, Vladislav (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (243 kB)

A new generalized algebra for the balancing of chi chemical reactions

Contibutors: Risteski, Ice B. (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (79 kB)

Hot rolling of the superaustenitic stainless steel AISI 904L

Contibutors: Tehovnik, Franc (author) / Žužek, Borut (author) / Arh, Boštjan (author) / Burja, Jaka (author) / Podgornik, Bojan (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (359 kB)

Tribo-corrosion properties of a NiTi dental wire

Contibutors: Močnik, Petra (author) / Kosec, Tadeja (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (659 kB)

Experimental analysis of the wear behavior of hybrid metal-matrix composites of LM25Al with equal...

Contibutors: Elango, Gopalakrishnan (author) / Raghunath, Busuna Kuppuswamy (author) / Palanikumar, Kayaroganam (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (891 kB)

Identification of the initial failure and damage of substituents of a unidirectional fiber-reinfo...

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (924 kB)

Microstructural comparison of the thermomechanically treated and cold deformed Nb-microalloyed tr...

Contibutors: Grajcar, Adam (author) / Radwański, Krzysztof (author)

1. PDF document (1897 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the working technology on the development of alloys H13-w(Cu) 87.5 %

Contibutors: Artiček, Uroš (author) / Bojinović, Marko (author) / Brunčko, Mihael (author) / Anžel, Ivan (author)

1. PDF document (3355 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Adsorption of hexavalent chromium from an aqueous solution of steel-making slag

Contibutors: Štrkalj, Anita (author) / Glavaš, Zoran (author) / Matijašić, Gordana (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (140 kB)

Geopolymerization of low-grade bauxite

Contibutors: Nikolić, Irena (author) / Janković - Častvan, Ivona (author) / Krivokapić, Jasmina (author) / Đurović, Dijana (author) / Radmilović, Vuk (author) / Radmilović, Velimir (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (266 kB)

Synthesis of alpha-Al2O3 based foams with improved properties as catalyst carriers

Contibutors: Nikolić-Stanojević, Vera (author) / Kamberović, Željko (author) / Anđić, Zoran (author) / Korać, Marija (author) / Sokić, Miroslav (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (396 kB)

Design of a microbial sensor using a conducting polymer of polyaniline/poly 4,4'-diaminodiphenyl ...

Contibutors: Sharifirad, Meysam (author) / Kiani, Farhoush (author) / Koohyar, Fardad (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (265 kB)

Simulation of continuous casting of steel under the influence of magnetic field using the local-r...

Contibutors: Mramor, Katarina (author) / Vertnik, Robert (author) / Šarler, Božidar (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (438 kB)

Testing the tribological characteristics of nodular cast iron austempered by a conventional and a...

Contibutors: Golubović, Dušan (author) / Kovač, Pavel (author) / Savković, Borislav (author) / Ješić, Dušan (author) / Gostimirović, Marin (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (395 kB)

Unsteady model-based predictive control of continuous steel casting by means of a very fast dynam...

Contibutors: Klimes, Lubomir (author) / Štětina, Josef (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (807 kB)

Evaluation of the mechanical properties of a hot isostatically pressed yttria-dispersed nickel-ba...

Contibutors: Mohan, Monika (author) / Subramanian, Ramanathan (author) / Alam, Muhammad Zafir (author) / Angelo, Peter Chrysologue (author)

Characterization and wear performance of CrAgN thin films deposited on Cr-V ledeburitic tool steel

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (627 kB)

1. TXT document (28 kB)

Contibutors: Jurči, Peter (author) / Bohovičová, Jana (author) / Hudáková, Mária (author) / Bílek, Pavel (author)

Electrodeposition and characterization of Cu-Zn alloy films obtained from a sulfate bath

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (728 kB)

1. TXT document (53 kB)

Contibutors: Redjechta, Abdelouahab (author) / Loucif, Kzmel (author) / Mentar, Loubna (author) / Khelladi, Mohamed Redha (author) / Beniaiche, Abdelkrim (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (238 kB)

Influence of non-metallic inclusions on the formation of hot cracks in the weld and heat-affected...

Contibutors: Zorc, Borut (author) / Imamović, Mustafa (author) / Kosec, Ladislav (author) / Kosec, Borut (author) / Nagode, Aleš (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (417 kB)

The influence of lamination and conductive printing inks on smart-card operability

Contibutors: Muck, Tadeja (author) / Đokić, Miloje (author) / Radonić, Vasa (author) / Mladenovič, Vladan (author) / Pleteršek, Anton (author) / Kavčič, Urška (author) / Hladnik, Aleš (author) / Crnojević-Bengin, Vesna (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (557 kB)

The effect of the firing temperature on the hardness of alumina porcelain

Contibutors: Štubňa, Igor (author) / Šín, Peter (author) / Viljus, Mart (author) / Trník, Anton (author)

1. PDF document (1241 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Preparation and application of polymer inclusion membranes (PIMs) including alamine 336 for the e...

Contibutors: Yildiz, Yasemin (author) / Manzak, Aynur (author) / Aydýn, Büşra (author) / Tutkun, Osman (author)

1. PDF document (1107 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimization of the die-sinking micro-EDM process for multiple performance characteristics using ...

Contibutors: Kadirvel, Arumugam (author) / Hariharan, Pillai (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (142 kB)

Morphology and magnetic properties of Fe3O4-alginic acid nanocomposites

Contibutors: Kaźmierczak, Małgorzata (author) / Pogorzelec-Glaser, Katarzyna (author) / Hilczer, Andrzej (author) / Jurga, Stefan (author) / Majchrzycki, Łukasz (author) / Nowicki, Marek (author) / Czajka, Ryszard (author) / Matelski, Filip (author) / Pankiewicz, Radosław (author) / Łęska, Bogusława (author) / Kępiński, Leszek (author) / Andrzejewski, Bartłomiej (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (615 kB)

Correlation between the excess losses and the relative permeability in fully finished non-oriente...

Contibutors: Novak, Gašper (author) / Kokošar, Janko (author) / Nagode, Aleš (author) / Steiner Petrovič, Darja (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (180 kB)

Biomechanical interactions between bone and metal-ceramic bridges composed of different types of ...

Contibutors: Tanasić, Ivan (author) / Tihaček Šojić, Ljiljana (author) / Milić Lemić, Aleksandra (author)

1. PDF document (1160 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Prediction of the nugget size in resistance spot welding with a combination of a finite-element a...

Contibutors: Afshari, Davood (author) / Sedighi, Mohammad (author) / Karimi, Mohammad Reza (author) / Barsoum, Zuheir (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Effect of Ti2AlC particles on the microstructure and elevated-temperature-deformation properties ...

Contibutors: Čegan, Tomáš (author) / Cagala, Michal (author) / Kursa, Miroslav (author) / Kawulok, Petr (author) / Rusz, Stanislav (author) / Juřica, Jan (author) / Vontorová, Jiřina (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (524 kB)

Experimental investigation of the surface properties obtained by cutting brass-353 (alpha + beta)...

Contibutors: Akkurt, Adnan (author)

1. PDF document (2152 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Effect of the quenching temperature on the Izod impact strength of polycarbonate

Contibutors: Rouabah, Farid (author) / Bouguettoucha, Abdallah (author) / Ibos, Laurent (author) / Haddaoui, Nacerddine (author)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (148 kB)

Failure-mode transition in resistance spot welded DP780 advanced high-strength steel

Contibutors: Abadi, Mehdi Mansouri Hasan (author) / Pouranvari, Majid (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (239 kB)

Investigation of physical properties of tungsten-based single crystals using an ultrasonic method

Contibutors: Skotnicová, Kateřina (author) / Kirillova, Valentina M. (author) / Zaporozhets, Oleg I. (author) / Drápala, Jaromír (author) / Szurman, Ivo (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (622 kB)

The preparation of magnetic nanoparticles based on cobalt ferrite or magnetite

Contibutors: Stambolić, Aleš (author) / Marinšek, Marjan (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (249 kB)

Influence of the thermo-mechanical treatment on the exfoliation and pitting corrosion of an AA508...

Contibutors: Halap, Akram (author) / Popović, Miljana (author) / Radetić, Tamara (author) / Vaščić, Veselin (author) / Romhanji, Endre (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (332 kB)

Synthesis comparison and characterization of chitosan-coated magnetic nanoparticles prepared with...

Contibutors: Hojnik Podrepšek, Gordana (author) / Knez, Željko (author) / Leitgeb, Maja (author)

1. PDF document (1024 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of graphite on the hardness and wear behavior of AA6061-B4C composite

Contibutors: Prabagaran, Subramaniam (author) / Chandramohan, Govindarajulu (author) / Shanmughasundaram, Palanisamy (author)

1. PDF document (1403 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Fatigue-life enhancement of sheets made of 34CrNiMo6 steel

Contibutors: Džugan, Jan (author) / Nový, Zbyšek (author) / Marešová, Martina (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

A new method for determining water adsorption phenomena on metal surfaces in a vacuum

Contibutors: Sefa, Makfir (author) / Šetina, Janez (author) / Erjavec, Bojan (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (245 kB)

Wear properties of ceramic bodies produced with natural zeolite

Contibutors: Demirkiran, Ayse Şükran (author)

1. PDF document (1540 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (10 kB)

Investigation of induction and classical-sintering effects on powder-metal parts with the finite-...

Contibutors: Akpinar, Göksan (author) / Çivi, Can (author) / Atik, Enver (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (433 kB)

Thermal effects of a high-pressure spray descaling process

Contibutors: Čarnogurská, Mária (author) / Příhoda, Miroslav (author) / Hajkr, Zdeněk (author) / Pyszko, René (author) / Toman, Zdeněk (author)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (890 kB)

Influence of heat treatment on the microstructure and mechanical properties of aluminium bronze

Contibutors: Sláma, Peter (author) / Dlouhý, Jaromír (author) / Kövér, Michal (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (586 kB)

Mechanical properties of the materials for bruxoguards

Contibutors: Lazić, Vojkan (author) / Špadijer Gostović, Aleksandra (author) / Romčević, Nebojša (author) / Đorđević, Igor (author) / Todorović, Ana (author) / Milošević, N. (author) / Rudolf, Rebeka (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (350 kB)