dLib.si - search results

Order-picking routing policies

Contibutors: Đukić, Goran (author) / Oluić, Čedomir (author)

Finite element method for optimum design selection of carport structures under multiple load cases

Numbering: 2004, volume 50, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (423 kB)

1. TXT document (25 kB)

Contibutors: Özkal, F. M. (author) / Cakir, F. (author) / Arkun, A. K. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (2626 kB)

Reconsidering production coordination

Contibutors: Gong, D. (author) / Tang, M. (author) / Liu, S. (author) / Li, Q. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (592 kB)

Point data pre-processing based on fuzzy logic for reverse engineering modelling

Contibutors: Budak, Igor (author) / Soković, Mirko (author) / Kopač, Janez (author) / Hodolič, Janko (author)

1. PDF document (4786 kB)

Numbering: 2009, volume 55, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (31 kB)

The application of service robots for logistics in manufacturing processes

Contibutors: Karabegović, Isak (author) / Karabegović, Edina (author) / Mahmić, Mehmed (author) / Husak, Ermin (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1820 kB)

1. TXT document (31 kB)

An integrated generalized discriminant analysis method and chemical reaction support vector machi...

Contibutors: Nguyen, V. H. (author) / Cheng, J. S. (author) / Thai, V. T. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (808 kB)

1. TXT document (49 kB)

Comparison of human resource management in Slovenian family and non-family businesses

Contibutors: Kopriva, Iztok (author) / Bernik, Mojca (author)

1. PDF document (1054 kB)

Numbering: 2009, volume 42, issue 6

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Work sampling for the production development

Contibutors: Martinec, Tomislav (author) / Škec, Stanko (author) / Savšek, Tomaž (author) / Perišić, M. M. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1190 kB)

1. TXT document (50 kB)

Ugotavljanje in vrednotenje potreb kupcev v postopku razvoja izdelka

Contibutors: Kušar, Janez (author) / Duhovnik, Jože (author) / Tomaževič, Rok (author) / Starbek, Marko (author)

Scheduling batches in multi hybrid cell manufacturing system considering worker resources

Numbering: 2007, volume 53, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (423 kB)

1. TXT document (94 kB)

Contibutors: Yilmaz, O. F. (author) / Cevikcan, E. (author) / Durmuşoglu, M. Bülent (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1043 kB)

1. TXT document (53 kB)

A successful CRM implementation project in a service company

Contibutors: Piskar, Franka (author) / Faganel, Armand (author)

Valuation of Slovene publicly traded companies with a valuation model based on expected earnings ...

Numbering: 2009, volume 42, issue 5

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (615 kB)

1. TXT document (57 kB)

Contibutors: Stubelj, Igor (author)

A feature-based framework for semantic interoperability of product models

Numbering: 2010, volume 8, issue 1

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (176 kB)

1. TXT document (55 kB)

Contibutors: Gupta, Ravi Kumar (author) / Gurumoorthy, Balan (author)

Numbering: 2008, volume 54, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (566 kB)

1. TXT document (42 kB)

Predicting order lead times

Contibutors: Berlec, Tomaž (author) / Govekar, Edvard (author) / Grum, Janez (author) / Potočnik, Primož (author) / Starbek, Marko (author)

1. PDF document (1394 kB)

Numbering: 2008, volume 54, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

"Šest sigm" v razvoju postopka izdelave

Contibutors: Pavletić, Duško (author) / Fakin, Sandro (author) / Soković, Mirko (author)

Numbering: 2004, volume 50, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (967 kB)

Intercultural competence in work: a case study in Eastern Finnish enterprises

Contibutors: Pitkänen, Pirkko (author)

Product development through multi-criteria analysis

Numbering: 2007, volume 5, issue 4

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (131 kB)

1. TXT document (46 kB)

Contibutors: Kostanjevec, Tomaž (author) / Polajnar, Andrej (author) / Sarjaš, Andrej (author)

Consideration of a buyback contract model that features game-leading marketing strategies

Numbering: 2008, volume 54, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (661 kB)

1. TXT document (37 kB)

Contibutors: He, H. (author) / Jian, M. (author) / Fang, X. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (519 kB)

1. TXT document (27 kB)

Development of new product

Contibutors: Karničar Šenk, Mateja (author) / Metlikovič, Peter (author) / Maletič, Matjaž (author) / Gomišček, Boštjan (author)

Numbering: 2010, volume 43, issue 2

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (357 kB)

Neutralization of waste filter dust with COsub2

Contibutors: Kračun, Ana (author) / Anžel, Ivan (author) / Fras Zemljič, Lidija (author) / Stergaršek, Andrej (author)

Source: Materiali in tehnologije

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (439 kB)

Performance modelling based on value analysis for improving product development process architecture

Contibutors: Yin, F. P. (author) / Gao, Qianying (author) / Ji, X. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (858 kB)

Sistem za razporejanje in zmanjševanje stroškov proizvodnje

Contibutors: Bubenik, Peter (author)

Model strateškega odločanja distribucije orodij z uporabo pravil mehke logike

Numbering: 2004, volume 50, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (239 kB)

1. TXT document (24 kB)

Contibutors: Vrečer, Gorazd (author) / Čuš, Franc (author)

Hevristični model razvoja proizvodnih zmogljivosti

Numbering: 2000, volume 46, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (197 kB)

1. TXT document (32 kB)

Contibutors: Kremljak, Zvonko (author) / Polajnar, Andrej (author) / Buchmeister, Borut (author)

Šest sigm: zahtevna pobuda kakovosti

Numbering: 2005, volume 51, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (427 kB)

1. TXT document (57 kB)

Contibutors: Pavletić, Duško (author) / Soković, Mirko (author)

Analiza merilnih sistemov za zagotavljanje kakovosti v procesu šest sigm

Numbering: 2002, volume 48, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (601 kB)

1. TXT document (41 kB)

Contibutors: Soković, Mirko (author) / Pavletić, Duško (author) / Matković, Romeo (author)

Numbering: 2005, volume 51, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (363 kB)

Financial distress prediction of Iranian companies using data minig techniques

Contibutors: Moradi, Mahdi (author) / Salehi, Mahdi (author) / Ghorgani, Mohammad Ebrahim (author) / Sadoghi Yazdi, Hadi (author)

1. PDF document (1109 kB)

Numbering: 2013, volume 46, issue 1

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

Reliability and efficacy of identification systems and supply chain management

Contibutors: Brumnik, Robert (author) / Balantič, Zvone (author)

Numbering: 2008, volume 54, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (440 kB)

Coupling functions treatment in a Bi-Level optimization process

Contibutors: Guédas, Benoît (author) / Dépincé, Philippe (author)

A general approach to optimize disassembly sequence planning based on disassembly network

Numbering: 2008, volume 54, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (319 kB)

1. TXT document (45 kB)

Contibutors: Yu, B. (author) / Wu, E. (author) / Chen, C. (author) / Yang, Y. (author) / Yao, B. Z. (author) / Lin, Q. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1261 kB)

Drilling process optimization by using fuzzy-based multi-response surface methodology

Contibutors: Boyaci, A. I. (author) / Hatipoglu, T. (author) / Balci, Erhan (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (639 kB)

Some aspects of business ethics in family enterprises in Slovenia

Contibutors: Duh, Mojca (author) / Belak, Jernej (author) / Tominc, Polona (author) / Rebernik, Miroslav (author)

Numbering: 2007, volume 40, issue 5

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (192 kB)

Concept of intelligent supporting information system for development of new appliances

Contibutors: Ogrizek, Boštjan (author) / Rehar, Tomaž (author) / Leber, Marjan (author) / Buchmeister, Borut (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (694 kB)

Simultaneous determination of production and shipment decisions for a multi-product inventory sys...

Contibutors: Chiu, Y. P. (author) / Chiang, K.-W. (author) / Chiu, S. W. (author) / Song, M.-S. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1391 kB)

The need for simulation in complex industrial systems

Contibutors: Aboura, Khalid (author) / Kljajić, Miroljub (author) / Eskandarian, Ali (author)

Numbering: 2012, volume 45, issue 5

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (435 kB)

Production monitoring system for understanding product robustness

Contibutors: Boorla, S. M. (author) / Howard, T. J. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1758 kB)

1. TXT document (41 kB)

Human resource development in a small company

Contibutors: Bernik, Mojca (author) / Kermc, Dušanka (author)

Reward level evaluation of parallel sytems

Numbering: 2013, volume 46, issue 4

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (107 kB)

1. TXT document (29 kB)

Contibutors: Vasov, Ljubiša (author) / Stojiljković, Branimir (author) / Mitrović, Časlav (author)

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (237 kB)

Konstruiranje izdelka s pomočjo tehnike optimizacije stika

Contibutors: Páczelt, István (author) / Baksa, Attila (author) / Szabó, Tamás (author)

Organisational effectiveness and customer satisfaction

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (887 kB)

1. TXT document (46 kB)

Contibutors: Ambrož, Milan (author) / Praprotnik, Martina (author)

An alternative criteria research methodology for selecting a new product

Numbering: 2008, volume 41, issue 5

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (945 kB)

1. TXT document (67 kB)

Contibutors: Nikolić, Milan (author) / Sajfert, Zvonko (author) / Nikolić, Branka (author)

Numbering: 2005, volume 38, issue 9

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (591 kB)

Investment-cash flow sensitivity

Contibutors: Salehi, Mahdi (author) / Mohammadi, Ali (author) / Taherzadeh Esfahani, Parisa (author)

A Petri net model for the integration of purchasing, production and packaging using Kanban system

Numbering: 2013, volume 46, issue 3

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (169 kB)

1. TXT document (53 kB)

Contibutors: Ullah, H. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (724 kB)

1. TXT document (42 kB)

A combined zone-LP and simulated annealing algorithm for unequal-area facility layout problem

Contibutors: Xiao, Y. J. (author) / Zheng, Y. (author) / Zhang, Li- Ming (author) / Kuo, Y. H. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (713 kB)

Intelligent interfacing module of process capability among product and process development system...

Contibutors: Bargelis, Algirdas (author) / Kuosmanen, Petri (author) / Stasiškis, Andrius (author)

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (253 kB)

Applying multi-phase particle swarm optimization to solve bulk cargo port scheduling problem

Contibutors: Tang, M. (author) / Gong, D. (author) / Liu, S. (author) / Zhang, Hankun (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (563 kB)

1. TXT document (37 kB)

Analysis of product development on large-scale production with multi-criteria approach

Contibutors: Kostanjevec, Tomaž (author) / Balič, Jože (author) / Rajh, Matej (author)

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (736 kB)

Vehicle scheduling based on plant growth simulation algorithm and distribution staff behavior

Contibutors: Ren, X. Y. (author) / Kong, Z. F. (author) / Liang, W. C. (author) / Li, H. C. (author) / Zhou, X. Y. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (732 kB)

1. TXT document (39 kB)

Razvoj programskega orodja za izbiro obrisnih postopkov rezanja

Contibutors: Kramar, Davorin (author) / Junkar, Mihael (author)

Proučevanje konstruiranja proizvodnih strojev s postopkom temelječim na modeliranju omejitev

Numbering: 2003, volume 49, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (579 kB)

1. TXT document (87 kB)

Contibutors: Matthews, Jason (author) / Singh, Baljinder (author) / Mullineux, Glen (author) / Medland, Tony (author)

Diagnostic of peripheral longitudinal grinding by using acoustic emission signal

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (410 kB)

1. TXT document (54 kB)

Contibutors: Zylka, L. (author) / Burek, Jan (author) / Mazur, D. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (2262 kB)

Functional and information modeling of production using IDEF methods

Contibutors: Šerifi, Veis (author) / Dašić, Predrag (author) / Ječmenica, Ratomir (author) / Labović, Dragana (author)

Numbering: 2009, volume 55, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (438 kB)

Quantifying the robustness of process manufacturing concept - a medical product case study

Contibutors: Boorla, S. M. (author) / Troldtoft, M. E. (author) / Eifler, T. (author) / Howard, T. J. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1289 kB)

1. TXT document (39 kB)

Infrared temperature measurement and increasing infrared measurement accuracy in the context of m...

Contibutors: Masoudi, S. (author) / Gholami, M. A. (author) / Janghorban Iariche, M. (author) / Vafadar, A. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (2101 kB)

A PC-based decision support system for optimal cutting of logs in veneers production

Contibutors: Čižman, Anton (author) / Urh, Marko (author)

Source: Informatica (Ljubljana)

Numbering: 2006, volume 30, issue 2

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (218 kB)

1. TXT document (29 kB)

The impact of crisis sales promotions on branded and unbranded toys

Contibutors: Bratina, Danjel (author)

Model za učinkovito upravljanje proizvodnje po naročilu

Numbering: 2011, volume 9, issue 2

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

1. TXT document (28 kB)

Contibutors: Palčič, Iztok (author) / Polajnar, Andrej (author) / Pandža, Krsto (author)

The integrating role of simulation in modern manufacturing planning and scheduling

Numbering: 2003, volume 49, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (562 kB)

1. TXT document (76 kB)

Contibutors: Arsovski, Slavko (author) / Arsovski, Zora (author) / Mirovic, Zoran (author)

Numbering: 2009, volume 55, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (450 kB)

Upravljanje tehnologije - ključ konkurenčnosti

Contibutors: Dolinšek, Slavko (author) / Bavec, Cene (author) / Mihelič, Aleš (author) / Prodan, Igor (author)

The specifics of supply chain integration with small and medium-sized enterprises

Numbering: 2002, volume 48, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (131 kB)

1. TXT document (20 kB)

Contibutors: Logožar, Klavdij (author)

Source: Naše gospodarstvo

Numbering: 2013, volume 59, issue 1/2

Provider: Univerza v Mariboru, Ekonomsko-poslovna fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (698 kB)

1. TXT document (22 kB)

Razvoj naprednih metod za vodenje proizvodnih postopkov

Contibutors: Tasič, Tadej (author) / Buchmeister, Borut (author) / Ačko, Bojan (author)

System thinking in managing technological innovation systems in manufactoring companies

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (247 kB)

1. TXT document (52 kB)

Contibutors: Oyebisi, Timothy O. (author) / Momodu, Abiodun S. (author) / Olabode, Segun O. (author)

Source: Naše gospodarstvo

Numbering: 2013, volume 59, issue 3/4

Provider: Univerza v Mariboru, Ekonomsko-poslovna fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (676 kB)

1. TXT document (29 kB)

Means of knowledge acquisition of entrepreneurs and their success

Contibutors: Hvalič Erzetič, Barbara (author)

Numbering: 2008, volume 6, issue 2

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (124 kB)

Multimedia supported study of achieving high worker's efficiency in relation to his work

Contibutors: Balantič, Zvone (author) / Bernik, Mojca (author)

Source: Informatica (Ljubljana)

Numbering: 2001, volume 25, issue 3

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (467 kB)

1. TXT document (16 kB)

Optimization of the recycling processes for magnesium from a highly contaminated waste

Contibutors: Manojlović, Vaso (author) / Kamberović, Željko (author) / Sokić, Miroslav (author) / Gulišija, Zvonko (author) / Matković, Vladislav (author)

Source: Materiali in tehnologije

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (243 kB)

Serbia as an ecommerce region

Contibutors: Jošanov, Ivana (author) / Josanov, Borislav (author)

Aluminium hot extrusion process capability improvement using Six Sigma

Numbering: 2007, volume 40, issue 2

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (123 kB)

1. TXT document (15 kB)

Contibutors: Ketan, H. (author) / Nassir, M. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (957 kB)

1. TXT document (27 kB)

Kako zagotoviti konkurenčnost majhnega podjetja

Contibutors: Starbek, Marko (author) / Duhovnik, Jože (author) / Grum, Janez (author) / Kušar, Janez (author)

Measurement of company effectiveness using analytic network process method

Numbering: 2003, volume 49, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (545 kB)

1. TXT document (59 kB)

Contibutors: Janjić, Goran (author) / Tanasić, Zorana (author) / Kosec, Borut (author)

Source: RMZ-materials and geoenvironment

Numbering: 2017, volume 64, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (729 kB)

1. TXT document (28 kB)

In-process non-destructive ultrasonic testing application during wire plus arc additive manufactu...

Contibutors: Knezović, Nikola (author) / Dolšak, Bojan (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1050 kB)

1. TXT document (41 kB)

Tehnologija in skrajševanje časov razvoja novih izdelkov

Contibutors: Pogačnik, Marjan (author) / Kopač, Janez (author)

1. PDF document (3772 kB)

Numbering: 2000, volume 46, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (27 kB)

Cognitive product development

Contibutors: Gielingh, Wim (author)

1. PDF document (2587 kB)

Numbering: 2008, volume 54, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (43 kB)

Global education in manufacturing

Contibutors: Rolstadas, Asbjorn (author) / Dolinšek, Slavko (author)

Numbering: 2006, volume 4, issue 3

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

An inventory model with METRIC approach in location-routing-inventory problem

Contibutors: Gholamian, M. R. (author) / Heydari, M. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (713 kB)

1. TXT document (35 kB)

A new method for mathematical and simulation modelling interactivity: A case study in flexible jo...

Contibutors: Ojsteršek, Robert (author) / Lalic, Danijela (author) / Buchmeister, Borut (author)

Source: Advances in production engineering and management

Numbering: 2019, volume 14, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1462 kB)

The restructuring of the steel industry in Slovenia

Contibutors: Šuštar, Boris (author) / Prešern, Vasilij (author) / Gungel, Eva (author)

Source: Kovine zlitine tehnologije

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (324 kB)

1. TXT document (12 kB)

Conceptual research model for studying students' entrepreneurial competencies

Contibutors: Zdolšek Draksler, Tanja (author) / Širec, Karin (author)

Source: Naše gospodarstvo

Numbering: 2018, volume 64, issue 4

Provider: Univerza v Mariboru, Ekonomsko-poslovna fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (335 kB)

HRM practices in insurance companies: a study of Indian and multinational companies

Contibutors: Kundu, Subhash C. (author) / Malhan, Divya (author)

How to perform a simulation project - an example of scheduling with genetic algorithms and visual...

Numbering: 2009, volume 7, issue 2

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (173 kB)

1. TXT document (56 kB)

Contibutors: Breskvar, Uroš (author) / Kljajić, Miroljub (author)

Numbering: 2005, volume 38, issue 9

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (133 kB)

Emergent synthesis based multi-objective design of the manufacturing system shop-floor

Contibutors: Car, Zlatan (author) / Barišić, Branimir (author) / Rucki, Miroslaw (author)

Production planning through customized ERP at a Nordic manufacturing company

Numbering: 2009, volume 55, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (642 kB)

1. TXT document (28 kB)

Contibutors: Gore, Amol (author) / Haapasalo, Harri (author) / Kess, Pekka (author)

Source: Management

Numbering: 2011, volume 6, issue 3

Provider: Univerza na Primorskem, Fakulteta za management

1. PDF document (113 kB)

1. TXT document (31 kB)

Vehicle routing optimization with multiple fuzzy time windows based on improved wolf pack algorithm

Contibutors: Cao, Q. K. (author) / Yang, K. W. (author) / Ren, X. Y. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (656 kB)

Predlog funkcijskih značilnosti faze zasnove v konstrukcijskem postopku

Contibutors: Golob, Borut (author) / Jezernik, Anton (author)

An illustration of the impact of economic and political risk using the country credit rating mode...

Numbering: 2003, volume 49, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (499 kB)

1. TXT document (52 kB)

Contibutors: McGowan, Carl B. (author)

An implementation of lean scheduling in a job shop environment

Numbering: 2008, volume 6, issue 2

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

1. TXT document (32 kB)

Contibutors: Haider, A. (author) / Mirza, J. (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (546 kB)

1. TXT document (39 kB)

Flow of goods across customs territories

Contibutors: Cedilnik, Marko (author)

Source: Naše gospodarstvo

Numbering: 2013, volume 59, issue 1/2

Provider: Univerza v Mariboru, Ekonomsko-poslovna fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (690 kB)

1. TXT document (13 kB)

Influence of the production fluctuation on the process energy intensity in iron and steel industry

Contibutors: Chen, D. (author) / Lu, B. (author) / Chen, G. (author) / Yu, W. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (886 kB)

A company's readiness for concurrent product and process development

Contibutors: Žargi, Urban (author) / Kušar, Janez (author) / Berlec, Tomaž (author) / Starbek, Marko (author)

Selection criteria for six sigma projects in Slovenian manufacturing companies

Numbering: 2009, volume 55, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (932 kB)

1. TXT document (24 kB)

Contibutors: Gošnik, Dušan (author) / Hohnjec, Matej (author)

Numbering: 2009, volume 42, issue 4

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (518 kB)

Izkušnje pri uvajanju računalniško podprtega konstruiranja in smeri razvoja v ADRIA Mobil d.o.o.

Contibutors: Hren, Gorazd (author) / Jezernik, Anton (author) / Lukšič, Stanislav (author)

Numbering: 2000, volume 46, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (517 kB)

Computerized logistics information systems - a key to competitiveness

Contibutors: Čižman, Anton (author)

Source: Informatica (Ljubljana)

Numbering: 2001, volume 25, issue 1

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (842 kB)

Basic quality tools in continuous improvement process

Contibutors: Soković, Mirko (author) / Jovanović, Jelena (author) / Krivokapić, Zdravko (author) / Vujović, Aleksandar (author)

Numbering: 2009, volume 5, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (804 kB)

The relationship between working capital management efficiency and EBIT

Contibutors: Azhagaiah, Ramachandran (author) / Janakiraman, Muralidharan (author)

Numbering: 2009, volume 7, issue 1

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

The relationship between delay in announcing quaterly forecasts of annual earnings and the type o...

Contibutors: Moradi, Mahdi (author) / Salehi, Mahdi (author) / Ayask, Seyyed Saeed Mehrdad (author)

Numbering: 2013, volume 46, issue 2

Provider: Univerza v Mariboru, Fakulteta za organizacijske vede
(Obvezni izvod spletne publikacije)

1. PDF document (207 kB)

ICT adoption policy of Australian and Croatian SMES

Contibutors: Skoko, Hazbo (author) / Krivokapić-Skoko, Branka (author) / Škare, Marinko (author) / Cerić, Arnela (author)

Numbering: 2006, volume 4, issue 1

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (131 kB)

Influences of implementing the learning organisation on companies' financial and non-financial pe...

Contibutors: Češnovar, Tone (author)

A new framework for complexity analysis in international development projects - Results from a De...

Numbering: 2010, volume 8, issue 3

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

1. TXT document (50 kB)

Contibutors: Gajić, Slađana (author) / Palčič, Iztok (author)

Source: Advances in production engineering and management

Numbering: 2019, volume 14, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (2145 kB)

1. TXT document (53 kB)

The logistic principles for fast flexible strategy design of the company in crisis time

Contibutors: Malindžák, Dušan (author) / Mervart, Jaroslav (author) / Lenort, Radim (author)

Numbering: 2011, volume 9, issue 2

Provider: Univerza na Primorskem, Fakulteta za management
(Obvezni izvod spletne publikacije)

1. PDF document (146 kB)

Assembly initiated production as a prerequisite for mass customization and effective manufacturing

Contibutors: Anišić, Zoran (author) / Krsmanović, Cvijan (author)