Number of hits: 48
Source type
journals (42)
theses and dissertations (6)
Journals - titles
Acta chimica slovenica (2)
Acta hydrotechnica (1)
Advances in production engineering and management (26)
Gradbeni vestnik (1)
Informatica (Ljubljana) (4)
Kovine zlitine tehnologije (1)
Livarski vestnik (1)
Materiali in tehnologije (1)
Strojniški vestnik (1)
Ventil (Ljubljana) (4)
Journals - form
articles (41)
Language
english (37)
slovenian (12)
Date
1999 (1)
2003 (1)
2007 (1)
2008 (1)
2011 (1)
2012 (2)
2013 (1)
2014 (3)
2015 (5)
2016 (8)
2017 (5)
2018 (1)
2019 (4)
2020 (1)
2021 (2)
2022 (4)
2023 (1)
2024 (2)
2025 (4)
Location
Društvo livarjev Slovenije (1)
Inštitut za kovinske materiale in tehnologije (2)
Slovensko društvo Informatika (4)
Slovensko kemijsko društvo (2)
Univerza v Ljubljani, Biotehniška fakulteta (2)
Univerza v Ljubljani, Fakulteta za farmacijo (1)
Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo (1)
Univerza v Ljubljani, Fakulteta za strojništvo (6)
Univerza v Mariboru, Fakulteta za kemijo in kemijsko tehnologijo (2)
Univerza v Mariboru, Fakulteta za strojništvo (2)
Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (24)
Zveza društev gradbenih inženirjev in tehnikov Slovenije (1)
Content
Business Management (15)
Chemical Engineering (7)
Computer Science (6)
Cybernetics (1)
Engineering and Technology (12)
Industry, Craft, Handicraft (2)
Informatics (1)
Medicine (1)
Publisher
Društvo livarjev Slovenije (1)
Fakulteta za gradbeništvo in geodezijo (1)
Fakulteta za strojništvo, Inštitut za proizvodno strojništvo (26)
H. Zupan (1)
Informatika (1)
Inštitut za kovinske materiale in tehnologije (2)
K. Kološa (1)
K. Zajšek (1)
M. Čater (1)
R. Drobež (1)
Slovensko društvo Informatika (3)
Slovensko kemijsko društvo (2)
Univerza v Ljubljani, Fakulteta za strojništvo (4)
V. Krošelj (1)
Zveza društev gradbenih inženirjev in tehnikov Slovenije (1)
Zveza strojnih inženirjev in tehnikov Slovenije etc. (1)
Železarna Jesenice (1)
Železarna Ravne (1)
Železarna Štore (1)
Rights
CC BY – Attribution (10)
CC BY-NC-SA - Attribution, Non-Commercial, ShareAlike (2)
In Copyright (36)
Access
Public (42)
Restricted (designated terminals) (6)
Search in (48)
Sort by:
Drilling process optimization by using fuzzy-based multi-response surface methodology
Contibutors: Boyaci, A. I. (author) / Hatipoglu, T. (author) / Balci, Erhan (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (639 kB)
1. TXT document (30 kB)
Applying multi-phase particle swarm optimization to solve bulk cargo port scheduling problem
Contibutors: Tang, M. (author) / Gong, D. (author) / Liu, S. (author) / Zhang, Hankun (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (563 kB)
1. TXT document (37 kB)
Implicit and explicit averaging strategies for simulation-based optimization of a real-world prod...
Contibutors: Diaz, Juan Esteban (author) / Handl, Julia (author)
Source: Informatica (Ljubljana)
Numbering: 2015, volume 39, issue 2
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (386 kB)
1. TXT document (32 kB)
Preliminary numerical experiments in multiobjective optimization of a metallurgical production pr...
Contibutors: Filipič, Bogdan (author) / Tušar, Tea (author) / Laitinen, Erkki (author)
Source: Informatica (Ljubljana)
Numbering: 2007, volume 31, issue 2
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (185 kB)
1. TXT document (27 kB)
A new method for mathematical and simulation modelling interactivity: A case study in flexible jo...
Contibutors: Ojsteršek, Robert (author) / Lalic, Danijela (author) / Buchmeister, Borut (author)
Source: Advances in production engineering and management
Numbering: 2019, volume 14, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1462 kB)
1. TXT document (47 kB)
Vehicle routing optimization with multiple fuzzy time windows based on improved wolf pack algorithm
Contibutors: Cao, Q. K. (author) / Yang, K. W. (author) / Ren, X. Y. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (656 kB)
1. TXT document (33 kB)
Material and technological modelling of closed-die forging
Contibutors: Vorel, Ivan (author) / Jeníček, Štěpán (author) / Jirková, Hana (author) / Mašek, Bohuslav (author)
Source: Materiali in tehnologije
Numbering: 2016, volume 50, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1107 kB)
1. TXT document (19 kB)
Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...
Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)
Source: Advances in production engineering and management
Numbering: 2015, volume 10, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (943 kB)
1. TXT document (47 kB)
A simulation approach to the process planning problem using a modified particle swarm optimization
Contibutors: Wang, J. F. (author) / Kang, W. L. (author) / Zhao, J. L. (author) / Chu, K. Y. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (810 kB)
1. TXT document (41 kB)
A study on the manufacturing decision-making and optimization of hybrid-channel supply chain for ...
Contibutors: Zhu, Xiangdong (author) / Li, B. Y. (author) / Wang, Z. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (601 kB)
1. TXT document (38 kB)
Container assignment optimization considering overlapping amount and operation distance in rail-r...
Contibutors: Wang, Liangmo (author) / Zhu, X. (author) / Xie, Z. (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (948 kB)
1. TXT document (34 kB)
Multi-objective optimization of the turning process using a Gravitational Search Algorithm (GSA) ...
Contibutors: Klančnik, Simon (author) / Hrelja, Marko (author) / Balič, Jože (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (480 kB)
1. TXT document (38 kB)
Evolutionary optimization of markers in clothes production
Contibutors: Filipič, Bogdan (author) / Fister, Iztok (author) / Mernik, Marjan (author)
Source: Informatica (Ljubljana)
Numbering: 2003, volume 27, issue 4
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (121 kB)
1. TXT document (21 kB)
Optimization for sustainable manufacturing based on axiomatic design principles
Contibutors: Lee, G. B. (author) / Badrul, O. (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (663 kB)
1. TXT document (41 kB)
A new multi-objective Jaya algorithm for optimization of modern machining processes
Contibutors: Rao, R.V. (author) / Rai, D.P. (author) / Ramkumar, J. (author) / Balič, Jože (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (664 kB)
1. TXT document (54 kB)
A bi-objective inspection policy optimization model for finite-life repairable systems using a ge...
Contibutors: Ramadan, S. (author)
Source: Advances in production engineering and management
Numbering: 2016, volume 11, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (616 kB)
1. TXT document (37 kB)
Optimizacija sestave mešanih portlandskih cementov glede na proizvodne stroške
Contibutors: Vuk, Tomaž (author) / Gabrijelčič, Magda (author)
Source: Kovine zlitine tehnologije
Numbering: 1999, volume 33, issue 1/2
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (100 kB)
1. TXT document (14 kB)
Scheduling optimization of a flexible manufacturing system using a modified NSGA-II algorithm
Contibutors: Nidhiry, N. M. (author) / Saravanan, R. (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (586 kB)
1. TXT document (39 kB)
Optimization of process parameters for machining of Al 7075 thin-walled structures
Contibutors: Borojević, S. (author) / Lukic, Dejan (author) / Milošević, Miloš (author) / Vukman, J. (author) / Kramar, Davorin (author)
Source: Advances in production engineering and management
Numbering: 2018, volume 13, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1929 kB)
1. TXT document (38 kB)
Particle swarm optimization approach for modelling a turning process
Contibutors: Hrelja, Marko (author) / Klančnik, Simon (author) / Irgolič, Tomaž (author) / Paulič, Matej (author) / Jurković, Zoran (author) / Balič, Jože (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2014, volume 9, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (567 kB)
1. TXT document (33 kB)
Determination of accuracy contour and optimization of workpiece positioning for robot milling
Contibutors: Gotlih, Janez (author) / Brezočnik, Miran (author) / Balič, Jože (author) / Karner, Timi (author) / Razboršek, Boštjan (author) / Gotlih, Karl (author)
Source: Advances in production engineering and management
Numbering: 2017, volume 12, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1727 kB)
1. TXT document (41 kB)
Experimental investigation and multi-objective optimization of micro-wire electrical discharge ma...
Contibutors: Singh, M. (author) / Ramkumar, J. (author) / Rao, R.V. (author) / Balič, Jože (author)
Source: Advances in production engineering and management
Numbering: 2019, volume 14, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1715 kB)
1. TXT document (41 kB)
Optimiranje zalog polizdelkov za hladilnike preko računalniškega modela in simulacije diskretnih ...
Contibutors: Debevec, Mihael (author) / Črep, Gregor (author)
Source: Ventil (Ljubljana)
Numbering: 2013, volume 19, issue 1
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1188 kB)
1. TXT document (23 kB)
Z izkoriščanjem obstoječih sredstev do velikih prihrankov v proizvodnji
Contibutors: Berlec, Tomaž (author) / Starbek, Marko (author)
Source: Ventil (Ljubljana)
Numbering: 2012, volume 18, issue 3
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1248 kB)
1. TXT document (12 kB)
Uporaba simulacije za optimiranje proizvodnega procesa vpenjalnih naprav
Contibutors: Debevec, Mihael (author) / Zupan, Hugo (author) / Gornik, Andrej (author) / Kastelec, Klemen (author) / Kosler, Hubert (author) / Herakovič, Niko (author)
Source: Ventil (Ljubljana)
Numbering: 2015, volume 21, issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1311 kB)
1. TXT document (15 kB)
Reduction of surface defects by optimization of casting speed using genetic programming
Contibutors: Kovačič, Miha (author) / Župerl, Uroš (author) / Gusel, Leo (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2023, volume 18, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1139 kB)
1. TXT document (44 kB)
Due date optimization in multi-objective scheduling of flexible job shop production
Contibutors: Ojsteršek, Robert (author) / Tang, Mincong (author) / Buchmeister, Borut (author)
Source: Advances in production engineering and management
Numbering: 2020, volume 15, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (974 kB)
1. TXT document (58 kB)
Uporaba avtonomno vodenega vozila za oskrbo robotskih celic z izdelki
Contibutors: Yakimovska, Maria (author) / Drev, Vinko (author)
Source: Ventil (Ljubljana)
Numbering: 2025, volume 31, issue 5
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (622 kB)
1. TXT document (19 kB)
Modelling and optimization of sulfur addition during 70MnVS4 steelmaking: An industrial case study
Contibutors: Kovačič, Miha (author) / Lešer, B. (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2021, volume 16, issue 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (551 kB)
1. TXT document (45 kB)
Optimizacija trajnostnega dobička, ustvarjenega pri proizvodnji nosilcev
Contibutors: Žula, Tomaž (author) / Kravanja, Stojan (author) / Božičnik, Stanislav (author)
Source: Gradbeni vestnik
Numbering: 2019, letn. 68
Provider: Zveza društev gradbenih inženirjev in tehnikov Slovenije
(Obvezni izvod spletne publikacije)
1. PDF document (954 kB)
1. TXT document (31 kB)
Modeling and optimization of finish diamond turning of spherical surfaces based on response surfa...
Contibutors: Kramar, Davorin (author) / Cica, Djordje (author)
Source: Advances in production engineering and management
Numbering: 2021, volume 16, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1192 kB)
1. TXT document (31 kB)
Biohydrogen production from simple carbohydrates with optimization of operating parameters
Contibutors: Muri, Petra (author) / Osojnik Črnivec, Ilja Gasan (author) / Djinović, Petar (author) / Pintar, Albin (author)
Source: Acta chimica slovenica
Numbering: 2016, volume 63, issue 1
Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (779 kB)
1. TXT document (48 kB)
Effect of solid state fermentation medium optimization on Pleurotus ostreatus laccase production
Contibutors: Belšak, Nataša (author) / Gregori, Andrej (author) / Leitgeb, Maja (author) / Klinar, Dušan (author) / Čelan, Štefan (author)
Source: Acta chimica slovenica
Numbering: 2015, volume 62, issue 4
Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)
1. PDF document (128 kB)
1. TXT document (33 kB)
Optimization of the rhomboidity of continuously cast billets using linear regression and genetic ...
Contibutors: Kovačič, Miha (author) / Župerl, Uroš (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2022, volume 17, issue 4
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1481 kB)
1. TXT document (29 kB)
Co-digestion of wastewater sludge with food waste and green cuttings - optimization of methane pr...
Contibutors: Kolbl Repinc, Sabina (author)
Source: Acta hydrotechnica
Numbering: 2022, volume 35, issue 63
Provider: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo
(Obvezni izvod spletne publikacije)
1. PDF document (613 kB)
1. TXT document (40 kB)
Impact of Cobot parameters on the worker productivity: Optimization challenge (2022, volume 17, issue 4)
Contibutors: Javernik, Aljaž (author) / Buchmeister, Borut (author) / Ojsteršek, Robert (author)
Source: Advances in production engineering and management
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1628 kB)
1. TXT document (38 kB)
Production of the design developed to assembly filter parts, optimization of welding and field test
Contibutors: Maden, Hakan (author) / Cetinkaya, Kerim (author)
Source: Strojniški vestnik
Numbering: 2022, volume 68, issue 11
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (2350 kB)
1. TXT document (51 kB)
Optimization of reliability and speed of the end-of-line quality inspection of electric motors us...
Contibutors: Mlinarič, Jernej (author) / Pregelj, Boštjan (author) / Boškoski, Pavle (author) / Dolanc, Gregor (author) / Petrovčič, Janko (author)
Source: Advances in production engineering and management
Numbering: 2024, volume 19, nu. 2
Provider: Univerza v Mariboru, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1932 kB)
1. TXT document (47 kB)
The impact of GA optimization model under the constraint of maximum inventory on the logistics co...
Contibutors: Yang, Yuan (author)
Source: Informatica (Ljubljana)
Numbering: 2024, volume 48, issue 11
Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)
1. PDF document (499 kB)
1. TXT document (50 kB)
Analysis and optimization of micro-milling parameters for improving part quality in ultrafine gra...
Contibutors: Kramar, Davorin (author) / Mijušković, Goran (author) / Cica, Djordje (author)
Source: Advances in production engineering and management
Numbering: 2025, volume 20, issue 1
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (1987 kB)
1. TXT document (49 kB)
Improving AGV path planning efficiency using Genetic Algorithms with Hamming distance-based initi...
Contibutors: Breznikar, Žiga (author) / Gotlih, Janez (author) / Artič, Ž. (author) / Brezočnik, Miran (author)
Source: Advances in production engineering and management
Numbering: 2025, volume 20, issue 3
Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)
1. PDF document (647 kB)
1. TXT document (34 kB)
Prenos znanja iz univerze v industrijo - optimiranje proizvodnje drogov iz aluminijeve zlitine EN...
Contibutors: Vončina, Maja (author) / Balaško, Tilen (author) / Kores, Stanislav (author) / Premužić, Tomaž (author) / Medved, Jože (author)
Source: Livarski vestnik
Numbering: 2025, volume 72, issue 4
Provider: Društvo livarjev Slovenije
1. PDF document (1351 kB)
1. TXT document (45 kB)
Optimizacija pridobivanja človeških mezenhimskih matičnih celic in medsebojni vplivi s tumorskimi celicami
Contibutors: Kološa, Katja (author) / Lah Turnšek, Tamara (mentor) / Kastrup Rehen, Stevens (comentor)
Provider: Univerza v Ljubljani, Biotehniška fakulteta
Publication is available at terminals on the library premises
Inteligentni algoritem za optimiranje montažnih in strežnih sistemov ter procesov linijske proizvodnje
Contibutors: Zupan, Hugo (author) / Herakovič, Niko (mentor)
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)
Publication is available at terminals on the library premises
Optimiranje bioprocesnih parametrov proizvodnje etanola in kefirana z mikrobioto kefirnih zrn
Contibutors: Zajšek, Katja (author) / Goršek, Andreja (mentor) / Rogelj, Irena (comentor)
Provider: Univerza v Mariboru, Fakulteta za kemijo in kemijsko tehnologijo
Publication is available at terminals on the library premises
Optimizacija izdelave pelet z lansoprazolom s termoplastičnim peletiranjem v hitrem mešalniku
Contibutors: Krošelj, Vesna (author) / Vrečer, Franc (mentor)
Provider: Univerza v Ljubljani, Fakulteta za farmacijo
(Obvezni izvod spletne publikacije)
Publication is available at terminals on the library premises
Optimizacija proizvodnje bioplina iz lignoceluloznega substrata z granulirano anaerobno biomaso iz UASB bioreaktorja
Contibutors: Čater, Maša (author) / Marinšek-Logar, Romana (mentor)
Provider: Univerza v Ljubljani, Biotehniška fakulteta
Publication is available at terminals on the library premises
Optimiranje procesov proizvodnje bioplina iz živalskih in drugih organskih odpadkov z uporabo računalniško podprte procesne tehnike
Contibutors: Drobež, Rozalija (author) / Kravanja, Zdravko (mentor) / Novak-Pintarič, Zorka (comentor)
Provider: Univerza v Mariboru, Fakulteta za kemijo in kemijsko tehnologijo
Publication is available at terminals on the library premises
Realization, property and rights 2026 Narodna in univerzitetna knjižnica, Turjaška 1, 1000 Ljubljana