dLib.si - search results

The dynamics of tapered-roller bearings – a bottom-up validation study

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (18 MB)

1. TXT document (266 kB)

Contibutors: Razpotnik, Matej (author) / Bischof, Thomas (author) / Boltežar, Miha (author)

1. PDF document (2210 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Applying parametric analysis in enhancing performance for double-layer scissor lifts

Contibutors: Dang, Anh-Tuan (author) / Nguyen, Dang-Viet (author) / Nguyen, Dinh-Ngoc (author)

1. PDF document (2102 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Machining of hard-to-cut AISI 4462 duplex stainless steel with an environmentally friendly approa...

Contibutors: Sönmez, Fikret (author)

1. PDF document (2536 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Finite element analysis of notch depth and angle in notch shear cutting of stainless-steel sheet

Contibutors: Emre Engin, Kaan (author)

1. PDF document (2358 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Recent advancement via experimental investigation of the mechanical characteristics of sisal and ...

Contibutors: Chaouki, Benchaabane (author) / Abdelkader, Kirad (author) / Mouloud, Aissani (author)

1. PDF document (2676 kB)

Numbering: 2023, volume 69, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Ultra-precision single-point diamond turning of a complex sinusoidal mesh surface using machining...

Contibutors: Ning, Peixing (author) / Zhao, Ji (author) / Ji, Shijun (author) / Li, Jingjing (author) / Dai, Handa (author)

1. PDF document (3694 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Basic theory and design method of variable shaft angle line gear mechanism

Contibutors: Chen, Yang-zhi (author) / He, Chao (author) / Lyu, Yue-ling (author)

1. PDF document (1574 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Predictive estimation of sliding bearing load-carrying capacity and tribological durability

Contibutors: Chernets, Myron (author) / Opielak, Marek (author) / Kornienko, Anatolii (author) / Radko, Oleg (author)

Mechanical properties of adhesive joints made with pressure-sensitive adhesives

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (623 kB)

1. TXT document (26 kB)

Contibutors: Rudawska, Anna (author) / Wahab, Magd Abdel (author)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (637 kB)

Characterization of the AZ31/AW-6060 joint fabricated using compound casting with a Zn interlayer...

Contibutors: Bucki, Tomasz (author) / Konieczny, Marek (author) / Bolibruchová, Dana (author) / Rzepa, Sylwia (author)

1. PDF document (5123 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Strojniški vestnik (2021, volume 67, issue 9)

1. PDF document (9997 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (273 kB)

Strojniški vestnik (2021, volume 67, issue 7/8)

1. PDF document (4208 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (231 kB)

Strojniški vestnik (2021, volume 67, issue 10)

1. PDF document (5090 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (275 kB)

Nonlinear control of a pneumatic actuator based on a dynamic friction model

Contibutors: Bo Tran, Xuan (author)

1. PDF document (6490 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Control of an anthropomorphic manipulator using LuGre friction model - design and experimental va...

Contibutors: Ali, Khurram (author) / Mehmood, Adeel (author) / Muhammad, Israr (author) / Razzaq, Sohail (author) / Iqbal, Jamshed (author)

1. PDF document (3160 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Strojniški vestnik (2021, volume 67, issue 11)

Predictions of friction coefficient in hydrodynamic journal bearing using artificial neural networks

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (20 MB)

1. TXT document (317 kB)

Contibutors: Milčić, Dragan (author) / Alsammarraie, Amir (author) / Madić, Miloš (author) / Krstić, Vladislav (author) / Milčić, Miodrag (author)

1. PDF document (1723 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Performance study of EDM process parameters using TiC/ZrSiO sub 4 particulate-reinforced copper c...

Contibutors: Saminatharaja, Duraisivam (author) / Suresh, Periyakgounder (author) / Selvaraj, Mahalingam (author) / Elangandhi, Jamuna (author)

1. PDF document (2781 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A method for calculating elliptic gear transmission efficiency based on transmission experiment

Contibutors: Dong, Changbin (author) / Liu, Yongping (author) / Zhao, Gang (author)

1. PDF document (3645 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Electro-hydraulic drive of the variable ratio lifting device under active load

Contibutors: Kosucki, Andrzej (author) / Stawiński, Łukasz (author) / Morawiec, Adrian (author) / Goszczak, Jarosław (author)

1. PDF document (3530 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Strojniški vestnik (2021, volume 67, issue 12)

1. PDF document (4247 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (342 kB)

Strojniški vestnik (2022, volume 68, issue 1)

1. PDF document (5720 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (290 kB)

Modelling and multi-objective optimization of elastic abrasive cutting of C45 and 42Cr4 steels

Contibutors: Stefanova Aleksandrova, Irina (author) / Stoynova, Anna (author) / Aleksandrov, Anatoliy (author)

1. PDF document (1111 kB)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (63 kB)

Investigation of cutting performance of a circular saw blade based on ANSYS/LS-DYNA

Contibutors: Wang, Zhiwen (author) / Zeng, Qingliang (author) / Lu, Zhenguo (author) / Wan, Lirong (author) / Zhang, Xin (author) / Liu, Zhihai (author)

1. PDF document (1596 kB)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Detection of outer wall defects on steel pipe using an encircling Rotating electromagnetic Field ...

Contibutors: Yin, Xiaokang (author) / Gu, Zhuoyong (author) / Wang, Wei (author) / Zhang, Xiaorui (author) / Yuan, Xin'an (author) / Li, Wei (author) / Chen, Guoming (author)

1. PDF document (1148 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Early detection of defects in gear systems using autocorrelation of morlet wavelet transforms

Contibutors: Ayad, Mouloud (author) / Saoudi, Kamel (author) / Rezki, Mohamed (author) / Benziane, Mourad (author) / Arabi, Abderrazak (author)

1. PDF document (1228 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Simulation and experimental research on electrical control anti-backlash based on a novel type of...

Contibutors: Wang, Guangjian (author) / Zhu, Dongdong (author) / Zou, Shuaidong (author) / Jiang, Yujiang (author) / Tian, Xin (author)

1. PDF document (4112 kB)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Strojniški vestnik (2022, volume 68, issue 4)

Strojniški vestnik (2022, volume 68, issue 3)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (16 MB)

1. TXT document (380 kB)

1. PDF document (7592 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (272 kB)

Strojniški vestnik (2022, volume 68, issue 2)

1. PDF document (4975 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (309 kB)

Effect of Immersion media for polyester composite reinforced with chicken feathers on creep behavior

Contibutors: Abed, Balsam H. (author) / Battawi, Ali A. (author) / Khuder, Abdul Wahab H. (author)

1. PDF document (1758 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Investigation of dynamic behaviour of four-leg hydraulic support under double-impact load

Contibutors: Xie, Yunyue (author) / Zeng, Qingliang (author) / Jiang, Kao (author) / Meng, Zhaosheng (author) / Li, Qinghai (author) / Zhang, Junming (author)

1. PDF document (3847 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Indices to evaluate the performance of force transmission and constraint for parallel mechanisms

Contibutors: Zhang, Tie (author) / Cao, Yachao (author) / Ma, Guangcai (author)

1. PDF document (3121 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Optimization of friction stir welding operation using optimal Taguchi-based ANFIS and genetic alg...

Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (3165 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Determination of Limiting Dome Height (LDH) values for Inconel 718 alloy sheet using FEA and hemi...

Contibutors: Ganesan, Kanmani (author) / Sambasivam, Saravanan (author) / Ramadass, Rajesh (author)

1. PDF document (1890 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Optimization of FSW processing factors on hardness for dissimilar AA6061-T6 and AZ31B O alloys

Contibutors: Vasantha Kumar, Karutha Pandian (author) / Balasubramanian, Muthusamy (author)

1. PDF document (2388 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Statistical modelling and optimization of TIG welding process parameters using Taguchi’s method

Contibutors: Omprakasam, S. (author) / Marimuthu, Kathiresan (author) / Raghu, R. (author) / Velmurugan, T. (author)

1. PDF document (4659 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Strojniški vestnik (2022, volume 68, issue 6)

Measuring the efficiency of reduction gearboxes for electric utility vehicles during specific dri...

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (18 MB)

1. TXT document (279 kB)

Contibutors: Petr, Tomas (author) / Brousek, Josef (author) / Jezek, Jakub (author) / Zvolsky, Tomas (author) / Vozenilek, Robert (author)

1. PDF document (1000 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Optimization of tuned mass damper location for enhanced chatter suppression in thin-wall milling

Contibutors: Selvakumar, Mohanraj (author) / Venugopal, Prabhu Raja (author) / Velayudhan, Gautham (author)

1. PDF document (2429 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Numerical analysis on a constant rate of kinetic energy change based a two-stage ejector-diffuser...

Contibutors: Sethi, Virendra Kumar (author) / Kumar, Anil (author) / Kumar Yadav, Surendra (author) / Yadav, Anshul (author) / Prasad, Lalta (author) / Winczek, Jerzy Adam (author)

Short-term creep behaviour of different polymers used in additive manufacturing under different t...

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (608 kB)

1. TXT document (26 kB)

Contibutors: Dogan, Oguz (author)

Preparation and thermal characterization of nanographene- enhanced fatty acid-based solid-liquid ...

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (779 kB)

1. TXT document (34 kB)

Contibutors: Kittusamy, Ragul Kumar (author) / Rajagopal, Velavan (author) / Felix, Paul Gregory (author)

1. PDF document (2863 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Optimization of in-vehicle carbon dioxide level in a 5-seat car

Contibutors: Jayasankar, Prabhakaran (author) / Subbaian, Jayabal (author)

1. PDF document (5552 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (48 kB)

Optimization in the resistant spot-welding process of AZ61 magnesium alloy

Contibutors: Afshari, Davood (author) / Ghaffari, Ali (author) / Barsum, Zuheir (author)

Fractal geometry as an effective heat sink

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (819 kB)

1. TXT document (32 kB)

Contibutors: Ramšak, Matjaž (author)

1. PDF document (3049 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Functional surface layer strengthening and wear resistance increasing of a low carbon steel by el...

Contibutors: Kombayev, Kuat (author) / Muzdybayev, Murat (author) / Muzdybayeva, Alfiya (author) / Myrzabekova, Dinara (author) / Wieleba, Wojciech (author) / Leśniewski, Tadeusz (author)

1. PDF document (5008 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Industrial experimental research as a contribution to the development of an experimental model of...

Contibutors: Wrzochal, Mateusz (author) / Adamczak, Stanisĺaw (author) / Piotrowicz, Grzegorz (author) / Wnuk, Sylwester (author)

1. PDF document (1485 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (34 kB)

Strojniški vestnik (2022, volume 68, issue 10)

1. PDF document (4125 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (343 kB)

Strojniški vestnik (2022, volume 68, issue 5)

1. PDF document (5459 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (337 kB)

Strojniški vestnik (2022, volume 68, issue 7/8)

1. PDF document (7093 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (243 kB)

Strojniški vestnik (2022, volume 68, issue 9)

1. PDF document (4883 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (246 kB)

Strojniški vestnik (2022, volume 68, issue 11)

A new device proposed for industrial measurement of rolling bearing friction torque

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (12 MB)

1. TXT document (261 kB)

Contibutors: Wrzochal, Mateusz (author) / Adamczak, Stanisĺaw (author) / Domagalski, Ryszard (author) / Piotrowicz, Grzegorz (author) / Wnuk, Sylwester (author)

1. PDF document (2141 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

The nickel aluminide coatings obtained on small holes produced with the EDD method

Contibutors: Trajer, Marcin (author) / Pyclik, Łukasz (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (4566 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Development of a new expert system for diagnosing marine diesel engines based on real-time diagno...

Contibutors: Gharib, Hla (author) / Kovács, György (author)

1. PDF document (1477 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Strojniški vestnik (2022, volume 68, issue 12)

Production of the design developed to assembly filter parts, optimization of welding and field test

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (12 MB)

1. TXT document (258 kB)

Contibutors: Maden, Hakan (author) / Cetinkaya, Kerim (author)

1. PDF document (2350 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Effect of tool geometry in stir zone for hook formation of dissimilar aluminium alloys

Contibutors: Navaneethakannan, Nandakumar (author) / Sivanandi, Periyasamy (author) / Somasekaran, Balakrishnan (author)

1. PDF document (1463 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Experimental research on transmission characteristics of elliptic gear transmission systems

Contibutors: Dong, Changbin (author) / Pei, Wangpeng (author) / Liu, Yongping (author) / Wei, Yongqiao (author) / Li, Dawei (author) / Guo, Rui (author) / Ren, Zhongtao (author)

1. PDF document (2337 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Strojniški vestnik (2023, volume 69, issue 1/2)

1. PDF document (6263 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (368 kB)

Multi-objective optimization of the chebyshev lambda mechanism

Contibutors: Miler, Daniel (author) / Birt, Dominik (author) / Hoić, Matija (author)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (846 kB)

Investigation of laser ablative micromachining of Al/TiB sub 2 nanocomposite

Contibutors: Manikandan Rajam, Pratheesh Kumar (author) / Nampoothiri, Jayakrishnan (author)

1. PDF document (1361 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation of machining parameters in thin-walled plate milling using a fixture with cylindric...

Contibutors: Natarajan, Muthu Mekala (author) / Chinnasamy, Balamurugan (author) / Alphonse, Bovas Herbert Bejaxhin (author)

1. PDF document (1196 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Strojniški vestnik (2023, volume 69, issue 3/4)

A case study of a methodological approach to the verification of UAV propeller performance

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (10 MB)

1. TXT document (359 kB)

Contibutors: Vorotović, Goran (author) / Burazer, Jela (author) / Bengin, Aleksandar (author) / Mitrović, Časlav (author) / Januzović, Miloš (author) / Petrović, Nebojša (author) / Novković, Đorđe (author)

1. PDF document (2940 kB)

Numbering: 2023, volume 69, issue 5/6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

An improved MSCNN and GRU model for rolling bearing fault diagnosis

Contibutors: Wang, Teng (author) / Tang, Youfu (author) / Wang, Tao (author) / Lei, Na (author)

1. PDF document (3166 kB)

Numbering: 2023, volume 69, issue 5/6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analysis of the dynamic characteristics of a gear-rotor-bearing system with external excitation

Contibutors: Na, Risu (author) / Jia, Kaifa (author) / Miao, Shujing (author) / Zhang, WeiGuo (author) / Zhang, Quan (author)

1. PDF document (8755 kB)

Numbering: 2023, volume 69, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Analytical formulae and applications of vertical dynamic responses for railway vehicles

Contibutors: Yu, Yuewei (author) / Song, Yunpeng (author) / Zhao, Leilei (author) / Zhou, Changcheng (author)

Numbering: 2023, volume 69, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (639 kB)

Effects of single/compound pit texture on the friction-induced vibration and noise of thrust cyli...

Contibutors: Wang, Yueyong (author) / Zhang, Yimin (author) / Wang, Yibing (author) / Long, Risheng (author)

1. PDF document (4034 kB)

Numbering: 2023, volume 69, issue 3/4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Inverse curves

Contibutors: Duta, Alina (author) / Popescu, Iulian (author) / Geonea, Ionut Daniel (author) / Cretu, Simona-Mariana (author) / Sass, Ludmila (author) / Popa, Dragos - Laurentiu (author)

Influence analysis and performance optimization of a pneumatic actuator exhaust utilization system

Numbering: 2023, volume 69, issue 3/4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (11 MB)

1. TXT document (48 kB)

Contibutors: Yu, Qihui (author) / Li, Fengqi (author) / Tan, Xin (author)

1. PDF document (2011 kB)

Numbering: 2023, volume 69, issue 3/4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Impacts of burnishing variables on the quality indicators in a single diamond burnishing operation

Contibutors: Le, Minh-Thai (author) / Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (1595 kB)

Numbering: 2023, volume 69, issue 3/4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Thermal investigations on a CNC lathe fitted with a dynamically enhanced steel-reinforced epoxy g...

Contibutors: Ramana, Mula Venkata (author) / Pudukarai Ramaswamy, Thyla (author) / Subramanian, Elango (author) / Chinnuraj, Shanmugam (author)

1. PDF document (4013 kB)

Numbering: 2023, volume 69, issue 3/4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (60 kB)

Strojniški vestnik (2023, volume 69, issue 5/6)

Strojniški vestnik (2023, volume 69, issue 11/12)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (16 MB)

1. TXT document (357 kB)

1. PDF document (6269 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (375 kB)

Optimization of abrasive waterjet cutting by using the CODAS method with regard to interdependent...

Contibutors: Perec, Andrzej (author) / Kawecka-Wyrzykowska, Elżbieta (author) / Radomska-Zalas, Aleksandra (author) / Pude, Frank (author)

1. PDF document (2458 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Fuzzy logic approach to predict surface roughness in powder mixed electric discharge machining of...

Contibutors: Rodić, Dragan (author) / Gostimirović, Marin (author) / Sekulić, Milenko (author) / Savković, Borislav (author) / Aleksić, Andjelko (author)

1. PDF document (1075 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

Mechanical and microstructural properties of B4C/W reinforced copper matrix composite using a fri...

Contibutors: Elangandhi, Jamuna (author) / Periyagounder, Suresh (author) / Selavaraj, Mahalingam (author) / Saminatharaja, Duraisivam (author)

1. PDF document (8579 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Research on an analytical method for the forming force of external spline cold roll-beating

Contibutors: Ma, Qun (author) / Zhang, Xiangwei (author)

1. PDF document (1597 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Grinding of cemented carbide using a vitrified diamond pin and lubricated liquid carbon dioxide

Contibutors: Kareepadath Santhos, Deepa (author) / Pušavec, Franci (author) / Krajnik, Peter (author)

1. PDF document (3166 kB)

Numbering: 2023, volume 69, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Vehicle technical inspection results in relation to EU directives and selected EU countries

Contibutors: Klemenc, Jernej (author) / Šeruga, Domen (author) / Svetina, Tomaž (author) / Tršelič, Jože (author)

1. PDF document (3456 kB)

Numbering: 2023, volume 69, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

Optimization method of multi-parameter coupling for a hydraulic rolling reshaper based on factori...

Contibutors: Li, Hongfei (author) / Luo, Min (author) / Xu, Tingting (author) / Li, Qiaozhen (author) / Hou, Yanming (author)

1. PDF document (2857 kB)

Numbering: 2023, volume 69, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Surface quality of AZ91D magnesium alloy after precision milling with coated tools

Contibutors: Korpysa, Jarosław (author) / Kuczmaszewski, Jozef (author) / Zagorski, Ireneusz (author)

1. PDF document (3082 kB)

Numbering: 2023, volume 69, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (48 kB)

Improvement of the dimensional accuracy of a Ti-6Al-4V ripple disc during electric hot incrementa...

Contibutors: Li, Zhengfang (author) / Di, Xudong (author) / Gao, Zhengyuan (author) / An, Zhiguo (author)

1. PDF document (3260 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Roughness parameters with statistical analysis and modelling using artificial neural networks aft...

Contibutors: Zagorski, Ireneusz (author) / Kulisz, Monika (author) / Szczepaniak, Anna (author)

1. PDF document (3954 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Multi-performance optimization of the rotary turning operation for environmental and quality indi...

Contibutors: Doan, Tat-Khoa (author) / Nguyen, Trung Thanh (author) / Van, An-Le (author)

1. PDF document (5594 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A new calculation method for instantaneous efficiency and torque fluctuation of spur gears

Contibutors: Tian, Xin (author) / Wang, Guangjian (author) / Jiang, Yujiang (author)

1. PDF document (2413 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Investigation of the titanium alloy turning process with prime a tools under high-pressure coolin...

Contibutors: Struzikiewicz, Grzegorz (author)

1. PDF document (1284 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A modified approach to the rack generation of beveloid gears

Contibutors: Şentürk, Berat Gürcan (author) / Fetvaci, Mahmut Cüneyt (author)

1. PDF document (1144 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation on the application of worn cutting tool inserts as burnishing tools

Contibutors: Adiyaman, Oktay (author)

1. PDF document (2960 kB)

Numbering: 2024, volume 70, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Strojniški vestnik (2024, volume 70, issue 1/2)

1. PDF document (8551 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (537 kB)

Strojniški vestnik (2024, volume 70, issue 3/4)

Service performance optimization and experimental study of a new w-w type non-circular planetary ...

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (26 MB)

1. TXT document (389 kB)

Contibutors: Dong, Changbin (author) / Yang, Xudong (author) / Li, Dawei (author) / Zhao, Gang (author) / Liu, Yongping (author)

1. PDF document (2301 kB)

Numbering: 2024, volume 70, issue 3/4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Transient flow characteristics of a pressure differential valve with different valve spool dampin...

Contibutors: Zhang, Xu (author)