Digitalna knjižnica Slovenije

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (940 kB)

Laser welding of the new grade of advanced high-strength steel Domex 960

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Lisiecki, Aleksander (author)

1. PDF document (4387 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint

Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (792 kB)

Influence of the tool rotational speed on the microstructure and joint strength of friction-stir ...

Contibutors: Dinaharan, Isaac (author) / Akinlabi, Esther T. (author)

1. PDF document (3469 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optodinamski vidik varjenja aluminija s pulznim laserjem Nd:YAG

Contibutors: Gorkič, Aleš (author) / Diaci, Janez (author) / Grad, Ladislav (author) / Babnik, Aleš (author) / Možina, Janez (author)

Vpliv vibriranja med varjenjem in po njem na mehanske lastnosti zvarov, zavarjenih v zaščiti močn...

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (133 kB)

1. TXT document (17 kB)

Contibutors: Pučko, Bogdan (author)

Numbering: 2000, volume 46, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (204 kB)

Varjenje močno legiranih jekel z oplaščenimi elektrodami

Contibutors: Kejžar, Rajko (author) / Kosec, Ladislav (author) / Kejžar, Uroš (author)

Numbering: 2007, volume 54, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (842 kB)

Structure and properties of laser-beam-welded joints of low-alloy high-strength steel DOCOL 1200M...

Contibutors: Górka, Jacek (author) / Ozgowicz, Andrzej (author)

1. PDF document (3676 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Effect of tool geometry and welding parameters on the microstructure and static strength of the f...

Contibutors: Abedini, Omid (author) / Ranjbarnodeh, Eslam (author) / Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (3418 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Impact toughness of WMD after MAG welding with micro-jet cooling

Contibutors: Wegrzyn, Tomasz (author) / Piwnik, Jan (author) / Borek, Aleksander (author) / Kurc-Lisiecka, Agnieszka (author)

1. PDF document (1055 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Characterisation of the mechanical and corrosive properties of newly developed glass-steel compos...

Contibutors: Lyubimova, Olga (author) / Gridasova, Ekaterina (author) / Gridasov, Alexander (author) / Frieling, Gerrit (author) / Klein, Martin (author) / Walther, Frank (author)

1. PDF document (1543 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Pojavi pri varjenju z večžično elektrodo za povečanje talilnega učinka

Contibutors: Tušek, Janez (author)

Numbering: 2002, volume 36, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (161 kB)

Sinergija v varilstvu (1997, volume 31, issue 1/2)

Contibutors: Tušek, Janez (author) / Suban, Marjan (author) / Tomc, Janko (author)

Effect of manganese content on the impact toughness and corrosion resistance of deposited metals ...

Provider: Narodna in univerzitetna knjižnica

1. PDF document (388 kB)

1. TXT document (9 kB)

Contibutors: Zhuo, Xiao (author) / An, Tongbang (author) / Ma, Chengyong (author) / Li, Lixin (author)

1. PDF document (3404 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Pomen varjenja pri izdelavi uparjalnikov za jedrsko elektrarno Krško

Contibutors: Tušek, Janez (author) / Lešnjak, Andrej (author) / Zorc, Borut (author) / Zorko, Jože (author) / Krošelj, Franc (author)

1. PDF document (1284 kB)

Numbering: 2000, volume 46, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (75 kB)

X-ray radiography of AISI 4340-2205 steels welded by friction welding

Contibutors: Caligulu, Ugur (author) / Yalcinoz, Mahmut (author) / Turkmen, Mustafa (author) / Mercan, Serdar (author)

1. PDF document (1058 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Relationship between a bainitic structure and the hardness in the weld zone of the friction-stir ...

Contibutors: Aydin, Hakan (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (623 kB)

1. PDF document (1446 kB)

Avtomatski varilski filter

Contibutors: Demšar, Andrej (author) / Marin, Bojan (author) / Pesek, Miha (author)

Source: Vakuumist

Numbering: 2001, volume 21, issue 4

Provider: Društvo za vakuumsko tehniko Slovenije

Study of the size difference in laser-welding spots of aluminum alloy

Contibutors: Pan, Yanfeng (author) / Shen, Yifu (author) / Zhao, Pizhi (author)

1. PDF document (1660 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Elektroda PK 13/6 : novi dodajni material za varjenje feritno martenzitnih jekel

Contibutors: Mesec, Ivan (author) / Markež, Jernej (author)

1. PDF document (1597 kB)

Numbering: 1973, volume 7, issue 1

Provider: Narodna in univerzitetna knjižnica

Effects of different stirrer-pin forms on the joining quality obtained with friction-stir welding

Contibutors: Başak, Hüdayim (author) / Kaptan, Kadir (author)

1. PDF document (1997 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Lasersko varjenje kontaktov okova žarnice E27

Contibutors: Juvan, Matej (author) / Babnik, Aleš (author) / Možina, Janez (author)

The effect of welding flux and welding wire on the microstructure and characteristics of the weld...

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (188 kB)

1. TXT document (16 kB)

Contibutors: Tonkovič-Prijanovič, Marica (author) / Humar, Matjaž (author) / Bizjak, Gregor (author)

1. PDF document (6294 kB)

Numbering: 2014, volume 61, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (17 kB)

Finite element modelling of submerged arc welding process for a symmetric T-beam

Contibutors: Culha, Osman (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (256 kB)

Influence of the tool geometry and process parameters on the static strength and hardness of fric...

Contibutors: Güler, Hande (author)

Friction-stir welding of aluminium alloy 5083

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (561 kB)

1. TXT document (16 kB)

Contibutors: Klobčar, Damjan (author) / Kosec, Ladislav (author) / Pietras, Adam (author) / Smolej, Anton (author)

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

Problematika varjenja finozrnatih mikrolegiranih jekel

Contibutors: Gabrovšek, Marin (author) / Stojan, Mihael (author)

1. PDF document (1557 kB)

Numbering: 1972, volume 6, issue 1

Provider: Narodna in univerzitetna knjižnica

The effect of the welding parameters and the coupling agent on the welding of composites

Contibutors: Erdogan, Ertugrul Selcuk (author) / Huner, Umit (author)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

Pulzno varjenje konstrukcijskih jekel

Contibutors: Kejžar, Rajko (author) / Kejžar, Uroš (author)

Numbering: 2007, volume 54, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (444 kB)

Analiza vzrokov pojava magnetne nesimetrije v srednjefrekvenčnem sistemu za uporovno točkasto var...

Contibutors: Klopčič, Beno (author) / Dolinar, Drago (author) / Štumberger, Gorazd (author)

Source: Elektrotehniški vestnik

Numbering: 2007, volume 74, issue 3

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (1364 kB)

Impact toughness of laser-welded butt joints of the new steel grade STRENX 1100MC

Contibutors: Kurc-Lisiecka, Agnieszka (author)

1. PDF document (8261 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Točkovno talilno varjenje z oplaščeno elektrodo z ugreznjenim oblokom

Contibutors: Tušek, Janez (author) / Celin, Roman (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (272 kB)

Effect of the tool geometry and welding parameters on the macrostructure, fracture mode and weld ...

Contibutors: Bilici, Mustafa Kemal (author) / Yükler, Ahmet Ýrfan (author) / Kastan, Alim (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (860 kB)

Effect of yttrium and zirconium microalloying on the structure and properties of weld joints of a...

Contibutors: Illarionov, Anatoly (author) / Popov, Artemy (author) / Illarionova, Svetlana (author) / Gadeev, Dmitry (author)

1. PDF document (2331 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Raziskave varjenja orodnega jekla

Contibutors: Celin, Roman (author) / Tušek, Janez (author) / Kmetič, Dimitrij (author) / Vojvodič-Tuma, Jelena (author)

Effect of heat treatment on the microstructure and mechanical properties of martensitic stainless...

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (236 kB)

1. TXT document (10 kB)

Contibutors: Calik, Adnan (author) / Karakaş, Mustafa Serdar (author)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (688 kB)

Weldability of metal matrix composite plates by friction stir welding at low welding parameters

Contibutors: Bozkurt, Yahya (author)

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (551 kB)

Effect of tunneling defects on the joint strength efficiency obtained with FSW

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author)

Numbering: 2014, volume 48, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (431 kB)

Izgube materiala pri elektrouporovnem varjenju verižnih členov

Contibutors: Legat, Franc (author)

Numbering: 1998, volume 32, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (48 kB)

Experimental comparison of resistance spot welding and friction-stir spot welding processes for t...

Contibutors: Kulekci, Mustafa Kemal (author) / Esme, Ugur (author) / Er, Onur (author)

Research on the microstructure of a Ti6Al4V-AA1050 explosive-welded bimetallic joint

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (854 kB)

1. TXT document (16 kB)

Contibutors: Kosturek, Robert (author) / Wachowski, Marcin (author) / Śnieźek, Lucjan (author) / Kruk, Adam (author) / Torzewski, Janusz (author) / Grzelak, Krzysztof (author) / Mierzyński, Janusz (author)

1. PDF document (1676 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of PCGTAW on the inconel 690 alloy with respect to microsegregation attainment in comparis...

Contibutors: Sivalingam, Sengottaiyan (author) / Sureshkannan, Gurusamy (author)

1. PDF document (2402 kB)

Numbering: 2019, volume 53, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Phase analysis of the slag after submerged-arc welding

Contibutors: Tonkovič-Prijanovič, Marica (author) / Lamut, Jakob (author) / Colarič, Petra (translator)

1. PDF document (2906 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

AA413.0 and AA1050 joined with friction-stir welding

Contibutors: Kastelic, Sebastjan (author) / Tušek, Janez (author) / Klobčar, Damjan (author) / Medved, Jože (author) / Mrvar, Primož (author)

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (363 kB)

Reparaturno varjenje orodnih jekel

Contibutors: Gnamuš, J. (author) / Rihar, Gabriel (author)

Optimization of the process parameters of friction-welded St-Al joints

Numbering: 1987, volume 21, issue 2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (687 kB)

1. TXT document (18 kB)

Contibutors: Sahin, Mumin (author) / Misirli, Cenk (author) / Selvi, Selcuk (author)

1. PDF document (3412 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Mechanical and metallurgical properties of aluminium and copper sheets joined by cold pressure we...

Contibutors: Ozel, Kaan (author) / Sahin, Mumin (author) / Akdogan, Aysegul (author)

1. PDF document (1397 kB)

Numbering: 2008, volume 54, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Selection of the most appropriate welding technology for hardfacing of bucket teeth

Contibutors: Lazić, Vukić (author) / Sedmak, Aleksandar (author) / Nikolić, Ružica R. (author) / Mutavdžić, Milan (author) / Aleksandrović, Srbislav (author) / Krstić, Božidar (author) / Milosavljević, Dragan (author)

1. PDF document (3734 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Ročno obločno varjenje s hlajenjem oplaščene elektrode (1997, volume 31, issue 1/2)

Contibutors: Tušek, Janez (author)

Provider: Narodna in univerzitetna knjižnica

1. PDF document (650 kB)

Študij razpokljivosti v hladnem v večvarkovnem varu, grajenem s postopkom varjenja pod praškom

Contibutors: Praunseis, Zdravko (author) / Toyoda, Masao (author)

The influence of process parameters on the mechanical properties of friction-stir-welded joints o...

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (282 kB)

1. TXT document (21 kB)

Contibutors: Milčić, Miodrag (author) / Vuherer, Tomaž (author) / Radisavljević, Igor (author) / Milčić, Dragan (author) / Kramberger, Janez (author)

1. PDF document (1258 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Experimental study and analysis of the wear properties of friction-stir-welded AA7075-T6 and A384...

Contibutors: Anganan, Karuppannan (author) / Prabagaran, Subramaniam (author) / Muthukrishnan, Mayakrishnan (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Prediction of the nugget size in resistance spot welding with a combination of a finite-element a...

Contibutors: Afshari, Davood (author) / Sedighi, Mohammad (author) / Karimi, Mohammad Reza (author) / Barsoum, Zuheir (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Varjenje polizdelkov za nadaljnjo obdelavo - tehnologija prihodnosti v avtomobilski industriji

Contibutors: Tušek, Janez (author)

Failure-mode transition in resistance spot welded DP780 advanced high-strength steel

Numbering: 1999, volume 45, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (529 kB)

1. TXT document (44 kB)

Contibutors: Abadi, Mehdi Mansouri Hasan (author) / Pouranvari, Majid (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (239 kB)

Weldability of Ti6Al4V to AISI 2205 with a nickel interlayer using friction welding

Contibutors: Kirik, Ihsan (author)

1. PDF document (2031 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

FSW welding of Al-Mg alloy plates with increased edge roughness using square pin tools of various...

Contibutors: Baloš, Sebastian (author) / Šiđanin, Leposava P. (author) / Dramićanin, Miroslav D. (author) / Labus Zlatanović, Danka (author) / Antić, Aco (author)

1. PDF document (1870 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Študij legiranja navara pri navarjanju obrabno obstojnih nanosov pod legirnimi varilnimi praški

Contibutors: Kejžar, Rajko (author)

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (378 kB)

DP780 dual-phase-steel spot welds

Contibutors: Pouranvari, Majid (author) / Marashi, Seyed Pirooz Hoveida (author) / Jaber, Hassanen Latef (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (825 kB)

Characterization of AZ31B magnesium alloy joints welded with a Nd:YAG laser

Contibutors: Liu, Hongtao (author) / Zhou, Jixue (author) / Chen, Yanfei (author) / Li, Tao (author) / Jiao, Xuebing (author) / Yang, Yuansheng (author) / Lin, Tao (author) / Cheng, Kaiming (author)

1. PDF document (2188 kB)

Numbering: 2018, volume 52, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Microstructure and properties of the high-temperature (HAZ) of thermo-mechanically treated S700MC...

Contibutors: Górka, Jacek (author)

1. PDF document (3973 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of pin profiles on the mechanical properties of friction-stir-welded AA5383 and AA7075

Contibutors: Kumar, Madhan Pandy (author) / Anbumalar, Veerabathiran (author)

1. PDF document (1076 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Influence of welding speed on the melting efficiency of Nd:YAG laser welding

Contibutors: Tadamalle, A. P. (author) / Reddy, Y. P. (author) / Ramjee, E. (author) / Reddy, V. K. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 3

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1468 kB)

Thermal analysis on a weld joint of aluminium alloy in gas metal arc welding

Contibutors: Ismail, M. I. S. (author) / Afieq, W. M. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (3775 kB)

1. TXT document (28 kB)

Dodajni material za varjenje konstrukcijskih jekel s povišano odpornostjo proti atmosferski koroz...

Contibutors: Mesec, Ivan (author) / Stojan, Mihael (author)

Numbering: 1975, volume 9, issue 1

Provider: Narodna in univerzitetna knjižnica

1. PDF document (684 kB)

Welding of the steel grade S890QL

Contibutors: Celin, Roman (author) / Bernetič, Jure (author) / Skobir Balantič, Danijela Anica (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (535 kB)

Parametri optimizacije varjenja za novo stržensko žico tipa RD 971

Contibutors: Meško, Jozef (author) / Leždík, Viliam (author) / Mičian, Miloš (author)

Numbering: 1999, volume 45, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (268 kB)

Dim pri varjenju z oplaščenimi elektrodami (1995, volume 29, issue 5/6)

Contibutors: Rihar, Gabriel (author) / Suban, Marjan (author)

Content of Cr and Cr (VI) in a welding fume by different Cr content in an experimental coating of...

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (560 kB)

1. TXT document (12 kB)

Contibutors: Begić, Razija (author) / Jenko, Monika (author) / Godec, Matjaž (author) / Donik, Črtomir (author)

Microstructure evolution and statistical analysis of Al/Cu friction-stir spot welds

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (191 kB)

1. TXT document (11 kB)

Contibutors: Mubiayi, Mukuna Patrick (author) / Akinlabi, Esther T. (author) / Makhatha, Mamookho Elizabeth (author) / Gadeev, Dmitry (author)

1. PDF document (1864 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Effect of tempering on the microstructure and mechanical properties of resistance-spot-welded DP9...

Contibutors: Nikoosohbat, Fateme (author) / Kheirandish, Shahram (author) / Goodarzi, Masoud (author) / Pouranvari, Majid (author)

1. PDF document (2099 kB)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

Problem varivosti debelostenskih varjencev iz konstrukcijskih jekel

Contibutors: Prosenc, Viktor (author) / Seliškar, Franc (author)

Optimizing the parameters for friction welding stainless steel to copper parts

Numbering: 1979, volume 13, issue 2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (941 kB)

1. TXT document (18 kB)

Contibutors: Sahin, Mumin (author)

1. PDF document (2239 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Application of Grey relation analysis (GRA) and Taguchi method for the parametric optimization of...

Contibutors: Aydin, Hakan (author) / Bayram, Ali (author) / Esme, Ugur (author) / Kazancoglu, Yugut (author) / Guven, Onur (author)

Role of tool rotational speed in influencing microstructural evolution, residual-stress formation...

Numbering: 2010, volume 44, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (398 kB)

1. TXT document (25 kB)

Contibutors: Sevvel, Pandian (author) / Satheesh, Chidambaram (author)

1. PDF document (2872 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Analysis of the microstructure of an AZ31/AA1050/AA2519 laminate produced using the explosive-wel...

Contibutors: Wachowski, Marcin (author) / Kosturek, Robert (author) / Śnieźek, Lucjan (author) / Mróz, Sebastian (author) / Gloc, Michal (author) / Krawczynska, Agnieszka (author) / Małek, Marcín (author)

1. PDF document (2237 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Finite-element minimization of the welding distortion of dissimilar joints of carbon steel and st...

Contibutors: Ranjbarnodeh, Eslam (author) / Pouranvari, Majid (author) / Farajpour, Mehdi (author)

Numbering: 2015, volume 49, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (804 kB)

Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge ...

Contibutors: Perović, Milenko A. (author) / Veljić, Darko (author) / Rakin, Marko (author) / Radović, Nenad (author) / Sedmak, Aleksandar (author) / Bajic, Nikola (author)

Microstructural evolution and mechanical characterizations of Al-TiC matrix composites produced v...

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (617 kB)

1. TXT document (28 kB)

Contibutors: Abegunde, Oluwatosin Olayinka (author) / Akinlabi, Esther T. (author) / Madyira, Daniel (author)

1. PDF document (2244 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Effect of the GMAW metal-transfer mode on the weld-metal structure of HSLA X80

Contibutors: Jurica, Maja (author) / Kožuh, Zoran (author) / Bauer, Branko (author) / Garašić, I. (author)

1. PDF document (1150 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Developing a friction-stir welding window for joining the dissimilar aluminum alloys AA6351 and A...

Contibutors: Palanivel, R. (author) / Laubscher, R. F. (author) / Dinaharan, Isaac (author) / Natarajan, Murugan (author)

Izdelava in optimizacija nove tehnologije varjenja pedala za avtomobilsko zavoro

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (830 kB)

1. TXT document (20 kB)

Contibutors: Tušek, Janez (author) / Uran, Miro (author) / Jonke, Miran (author)

Dependence of the fracture mode on the welding variables in the resistance spot welding of ferrit...

Numbering: 2001, volume 47, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (451 kB)

1. TXT document (45 kB)

Contibutors: Pouranvari, Majid (author) / Ranjbarnoodeh, Eslam (author)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (804 kB)

Effect of welding variables on mechanical properties of low carbon steel welded joint

Contibutors: Talabi, S. I. (author) / Owolabi, O. B. (author) / Adebisi, J. A. (author) / Yahaya, T. (author)

Source: Advances in production engineering and management

Numbering: 2014, volume 9, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (685 kB)

1. TXT document (17 kB)

Multi-objective methods for welding flux performance optimization

Contibutors: Adeyeye, Ademola David (author) / Oyawale, Festus Adekunle (author)

Friction stir welding of 2024-T3 aluminium alloy sheet with sheet pre-heating

Numbering: 2010, volume 57, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (865 kB)

1. TXT document (42 kB)

Contibutors: Kubit, Andrzej (author) / Kluz, Rafał (author) / Ochałek, Krzysztof (author) / Wydrzyński, Dawid (author) / Trzepieciński, Tomasz (author)

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (881 kB)

1. TXT document (27 kB)

Contibutors: Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (1089 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Tehnologija varjenja priključka z vilicami za pretovor kamnitih blokov

Contibutors: Bajec, Niko (author) / Pompe, Klemen (author) / Tušek, Janez (author)

Source: Ventil (Ljubljana)

Numbering: 2018, volume 24, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (584 kB)

Mikrovarjenje s trenjem in mešanjem bakrenih kontaktov

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author) / Bizjak, Milan (author) / Lešer, Vladka (author)

Source: Ventil (Ljubljana)

Numbering: 2014, volume 20, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (925 kB)

1. TXT document (21 kB)

Pregled uporabe laserskih tehnologij v avtomobilski industriji

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author)

Source: Ventil (Ljubljana)

Numbering: 2015, volume 21, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1621 kB)

1. TXT document (20 kB)

Robotsko lasersko varjenje nerjavne pločevine

Contibutors: Pompe, Klemen (author) / Ivančič, Robert (author) / Repnik, Primož (author) / Tušek, Janez (author)

Source: Ventil (Ljubljana)

Numbering: 2018, volume 24, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (797 kB)

Uporabnost vodotopnega papirja za zaščito korena zvarka

Contibutors: Pleterski, Matej (author) / Zorko, Domen (author) / Klobčar, Damjan (author)

Source: Ventil (Ljubljana)

Numbering: 2020, volume 26, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (730 kB)

Priporočila za lasersko varjenje v industrijskem okolju

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author)

Source: Ventil (Ljubljana)

Numbering: 2015, volume 21, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (6056 kB)

Thermal-mechanical sensory properties of hot-air welded textile transmission lines

Contibutors: Jevšnik, Simona (author) / Yi, Li (author) / Hu, Junyan (author) / Xiao, Han (author) / Xinxing, Wu (author) / Primentas, Anthony (author)

Source: Tekstilec

Numbering: 2016, volume 59, issue 2

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (236 kB)

1. TXT document (18 kB)

Device for the manufacturing of ovens by resistance seam welding

Contibutors: Praunseis, Zdravko (author) / Softić, Seudin (author)

Source: JET on-line
Journal of energy technology

Numbering: 2016, volume 9, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (2498 kB)

Microstructural evolution and materials flow in butt cold welding of copper

Contibutors: Huang, Yong (author) / Yan, Xiao-Juan (author) / Ran, Xiao-Long (author)

1. PDF document (4519 kB)

Numbering: 2020, volume 54, iss. 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Study on the correction of S-N distribution in the welding fatigue analysis method based on the b...

Contibutors: Sun, Yibo (author) / Yang, Xinhua (author)

1. PDF document (2023 kB)

Numbering: 2014, volume 60, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel

Contibutors: Bhatia, Anmol (author) / Wattal, Reeta (author)

1. PDF document (2581 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Experimental identification of optimized process parameters for FSW of AZ91C Mg alloy using quadr...

Contibutors: Satheesh, Chidambaram (author) / Sevvel, Pandian (author) / Senthil Kumar, R. (author)

1. PDF document (7404 kB)

Numbering: 2020, volume 66, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

An investigation on laser welding parameters on the strength of TRIP steel

Contibutors: Rahul, Khot S. (author) / Rao, T. Venkateshwara (author) / Harshad, Natu (author) / Girish, H. N. (author) / Ishigaki, Tadashi (author) / Madhusudan, Puttaswamy (author)