Number of hits: 37
Source type
journals (35)
research programmes (1)
theses and dissertations (1)
Journals - titles
Kovine zlitine tehnologije (10)
Materiali in tehnologije (15)
RMZ-materials and geoenvironment (9)
Strojniški vestnik (1)
Journals - form
articles (28)
journals (7)
Language
english (21)
slovenian (16)
Date
1994 (1)
1995 (2)
1996 (3)
1997 (2)
1998 (2)
2000 (1)
2001 (1)
2003 (1)
2004 (1)
2005 (1)
2006 (1)
2008 (2)
2009 (3)
2010 (1)
2011 (1)
2012 (1)
2013 (3)
2014 (2)
2016 (2)
2017 (1)
2018 (1)
2019 (1)
2020 (1)
2021 (1)
2023 (1)
Location
ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije (1)
Inštitut za kovinske materiale in tehnologije (19)
Narodna in univerzitetna knjižnica (6)
Univerza v Ljubljani, Fakulteta za strojništvo (1)
Univerza v Ljubljani, Naravoslovnotehniška fakulteta (10)
Content
Business Management (1)
Chemical Engineering (15)
Construction (1)
Engineering and Technology (19)
Industry, Craft, Handicraft (1)
Science (1)
Publisher
Association of Mechanical Engineers and Technicians of Slovenia et al. (1)
Inštitut za kovinske materiale in tehnologije (25)
Inštitut za rudarstvo, geotehnologijo in okolje (9)
Naravoslovnotehniška fakulteta (9)
S. Senčič (1)
Univerza v Ljubljani, Naravoslovnotehniška fakulteta (1)
Zveza strojnih inženirjev in tehnikov Slovenije et al. (1)
Železarna Jesenice (10)
Železarna Ravne (10)
Železarna Štore (10)
Rights
CC BY-NC-ND - Attribution, Non-Commercial, No Derivatives (1)
In Copyright (36)
Access
Public (36)
Restricted (designated terminals) (1)
Search in (37)
Sort by:
Wear level influence on chip segmentation and vibrations of the cutting tool
Contibutors: Antić, Aco (author) / Kovačevič, Dušan (author) / Zeljković, Milan (author) / Kosec, Borut (author) / Novak Marcinčin, Jozef (author)
Source: RMZ-materials and geoenvironment
Numbering: 2011, volume 58, issue 1
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (695 kB)
1. TXT document (29 kB)
Mehanske lastnosti spajkanih spojev (1997, volume 31, issue 5)
Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)
Source: Kovine zlitine tehnologije
Provider: Narodna in univerzitetna knjižnica
1. PDF document (797 kB)
1. TXT document (16 kB)
Armirani spajkani spoji povečane žilavosti (1997, volume 31, issue 5)
Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)
Source: Kovine zlitine tehnologije
Provider: Narodna in univerzitetna knjižnica
1. PDF document (873 kB)
1. TXT document (18 kB)
Temperaturno polje v ingotu (1995, volume 29, issue 1/2)
Contibutors: Kosec, Borut (author) / Pavlin, Franc (author) / Dretnik, Mateja (author) / Žnidarič, Sandra (author)
Source: Kovine zlitine tehnologije
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (360 kB)
1. TXT document (10 kB)
Kompozitni spajkani spoji (1996, volume 30, issue 1/2)
Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)
Source: Kovine zlitine tehnologije
Provider: Narodna in univerzitetna knjižnica
1. PDF document (945 kB)
1. TXT document (17 kB)
The content of rare-earth elements in mobile-phone components
Contibutors: Smodiš, Martin (author) / Samec, Niko (author) / Kosec, Borut (author) / Donik, Črtomir (author) / Godec, Matjaž (author) / Rudolf, Rebeka (author)
Source: Materiali in tehnologije
Numbering: 2018, volume 52, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1842 kB)
1. TXT document (42 kB)
Geometrical models for the deformation of round reinforcement wires when compressing a reinforced...
Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)
Source: Materiali in tehnologije
Numbering: 2005, volume 39, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1247 kB)
1. TXT document (28 kB)
Sinteza in analiza hitro strjenih trakov iz bakrovih zlitin
Contibutors: Šuler, Marko (author) / Bizjak, Milan (author) / Kosec, Ladislav (author) / Kosec, Borut (author) / Kneissl, Albert C. (author) / Anžel, Ivan (author)
Source: RMZ-materials and geoenvironment
Numbering: 2006, volume 53, issue 2
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (1105 kB)
1. TXT document (20 kB)
Centreline formation of the Nb(C,N) eutectic in 0.15% C; 0.0071% N; 0.022% Nb; 0.033% Al and 0.00...
Contibutors: Bernetič, Jure (author) / Bradaškja, Boštjan (author) / Kosec, Gorazd (author) / Kosec, Borut (author) / Bricelj, Erika (author)
Source: Materiali in tehnologije
Numbering: 2008, volume 42, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (260 kB)
1. TXT document (13 kB)
The influence of tool wear on the chip-forming mechanism and tool vibrations
Contibutors: Antić, Aco (author) / Petrović, Petar B. (author) / Zeljković, Milan (author) / Kosec, Borut (author) / Hodolič, Janko (author)
Source: Materiali in tehnologije
Numbering: 2012, volume 46, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (660 kB)
1. TXT document (27 kB)
Heat treatment of cold formed steel forgings
Contibutors: Kosec, Borut (author) / Brezigar, Matjaž (author) / Kosec, Gorazd (author) / Čevnik, Gabrijela (author) / Bizjak, Milan (author)
Source: RMZ-materials and geoenvironment
Numbering: 2009, volume 56, issue 3
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (1063 kB)
1. TXT document (13 kB)
Microstructural and phase analysis of CuAlNi shape-memory alloy after continuous casting
Contibutors: Gojić, Mirko (author) / Kožuh, Stjepan (author) / Anžel, Ivan (author) / Lojen, Gorazd (author) / Ivanić, Ivana (author) / Kosec, Borut (author)
Source: Materiali in tehnologije
Numbering: 2013, volume 47, issue 2
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1313 kB)
1. TXT document (15 kB)
Analiza temperaturnega polja na delovni površini orodja za tlačno litje z uporabo termografije
Contibutors: Kosec, Borut (author) / Težak, Bojan (author) / Kosec, Ladislav (author) / Kopač, Janez (author) / Vojvodič-Tuma, Jelena (author)
Source: Materiali in tehnologije
Numbering: 2000, volume 34, issue 6
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (170 kB)
1. TXT document (14 kB)
Heat treatment and fine-blanking Inconel 718
Contibutors: Česnik, Damir (author) / Bratuš, Vitoslav (author) / Kosec, Borut (author) / Rozman, Janez (author) / Bizjak, Milan (author)
Source: RMZ-materials and geoenvironment
Numbering: 2008, volume 55, issue 2
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (519 kB)
1. TXT document (20 kB)
Measurement of company effectiveness using analytic network process method
Contibutors: Janjić, Goran (author) / Tanasić, Zorana (author) / Kosec, Borut (author)
Source: RMZ-materials and geoenvironment
Numbering: 2017, volume 64, issue 2
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (729 kB)
1. TXT document (28 kB)
Makroskopski modeli dvofaznih materialov
Contibutors: Kosec, Borut (author) / Kosel, Franc (author)
Source: Kovine zlitine tehnologije
Numbering: 1998, volume 32, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (154 kB)
1. TXT document (20 kB)
Izboljšanje mehanskih lastnosti spajkanih spojev s kompozitno spajko (1995, volume 29, issue 1/2)
Contibutors: Zorc, Borut (author) / Kosec, Ladislav (author)
Source: Kovine zlitine tehnologije
Provider: Inštitut za kovinske materiale in tehnologije
1. PDF document (650 kB)
1. TXT document (19 kB)
Investigating the properties of dental composites
Contibutors: Nagode, Aleš (author) / Zupančič, Katja (author) / Zorc, Matija (author) / Žužek, Borut (author) / Karpe, Blaž (author) / Šetina, Barbara (author) / Zorc, Borut (author) / Kosec, Borut (author) / Bizjak, Milan (author) / Pavlič, Alenka (author)
Source: Materiali in tehnologije
Numbering: 2020, volume 54, issue 4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (1408 kB)
1. TXT document (25 kB)
Influence of non-metallic inclusions on the formation of hot cracks in the weld and heat-affected...
Contibutors: Zorc, Borut (author) / Imamović, Mustafa (author) / Kosec, Ladislav (author) / Kosec, Borut (author) / Nagode, Aleš (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 1
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (417 kB)
1. TXT document (26 kB)
Analiza poškodb na površini orodja za tlačno litje nosilca iz aluminijeve zlitine AlSi9Cu3
Contibutors: Kosec, Borut (author) / Kosec, Ladislav (author) / Kopač, Janez (author) / Škrinjar, Anton (author)
Source: Strojniški vestnik
Numbering: 2001, volume 47, issue 9
Provider: Univerza v Ljubljani, Fakulteta za strojništvo
1. PDF document (1125 kB)
1. TXT document (10 kB)
Effect of cerium additions on the AlSi17 casting alloy
Contibutors: Kores, Stanislav (author) / Vončina, Maja (author) / Kosec, Borut (author) / Mrvar, Primož (author) / Medved, Jože (author)
Source: Materiali in tehnologije
Numbering: 2010, volume 44, issue 3
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (622 kB)
1. TXT document (15 kB)
Life cycle assessment of an intermodal steel building unit
Contibutors: Milanković, Darko (author) / Milanović, Branislav (author) / Agarski, Boris (author) / Ilić, Milana (author) / Crnobrnja, Branka (author) / Nagode, Aleš (author) / Kosec, Borut (author) / Budak, Igor (author)
Source: RMZ-materials and geoenvironment
Numbering: 2013, volume 60, issue 1
Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)
1. PDF document (495 kB)
1. TXT document (15 kB)
Primerjava kovanih in struženih vijakov kvalitete 10.9
Contibutors: Kovačič, Grega (author) / Kosec, Borut (author)
Source: Materiali in tehnologije
Numbering: 2004, volume 38, issue 3/4
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (178 kB)
1. TXT document (15 kB)
Microstructural analysis of CuAlNiMn shape-memory alloy before and after the tensile testing
Contibutors: Ivanić, Ivana (author) / Gojić, Mirko (author) / Kožuh, Stjepan (author) / Kosec, Borut (author)
Source: Materiali in tehnologije
Numbering: 2014, volume 48, issue 5
Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)
1. PDF document (4176 kB)
1. TXT document (20 kB)
Sinteza in karakterizacija materialov
Contibutors: Kosec, Borut [11624] (project leader)
Duration: 2013 2009/12 01
Provider: ARRS - Javna agencija za raziskovalno dejavnost Republike Slovenije
1. PDF document (1090 kB)
1. TXT document (72 kB)
Realization, property and rights 2026 Narodna in univerzitetna knjižnica, Turjaška 1, 1000 Ljubljana