Digitalna knjižnica Slovenije

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Contibutors: Akkuş, Harun (author)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

Estimation of parameters in a planar segment process with a biological application

Contibutors: Beneš, Viktor (author) / Večeřa, Jakub (author) / Eltzner, Benjamin (author) / Wollnik, Carina (author) / Rehfeldt, Florian (author) / Králová, Veronika (author) / Huckemann, Stefan (author)

Source: Image analysis and stereology

Numbering: 2017, volume 36, issue 1

Provider: Društvo za stereologijo in kvantitativno analizo slike
(Obvezni izvod spletne publikacije)

1. PDF document (984 kB)

1. TXT document (30 kB)

Molecular dynamics simulation of Ti-6Al-4V diffusion bonding behavior under different process par...

Contibutors: Liu, Xiaogang (author) / Xu, Lei (author) / Zhang, Sun (author)

1. PDF document (4917 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Tensile properties of cold-drawn low-carbon steel wires under different process parameters

Contibutors: Çetinarslan, Cem S. (author) / Güzey, Ali (author)

Integrated statistical methodology for optimizing the machining parameters in SiC powder mixed - ...

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (760 kB)

1. TXT document (30 kB)

Contibutors: Modi, Manoj (author) / Agarwal, Gopal (author)

1. PDF document (1477 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the tool geometry and process parameters on the static strength and hardness of fric...

Contibutors: Güler, Hande (author)

Kombiniran sistem ločenega optimiranja in prilagodnega nastavljanja rezalnih parametrov med proce...

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (561 kB)

1. TXT document (16 kB)

Contibutors: Župerl, Uroš (author) / Čuš, Franc (author) / Kiker, Edvard (author) / Milfelner, Matjaž (author)

1. PDF document (1479 kB)

Numbering: 2005, volume 51, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (60 kB)

The effect of the welding parameters and the coupling agent on the welding of composites

Contibutors: Erdogan, Ertugrul Selcuk (author) / Huner, Umit (author)

Material parameters for a numerical simulation of a compaction process for sintered double-height...

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

1. TXT document (37 kB)

Contibutors: Verlak, Tomaž (author) / Šori, Marko (author) / Glodež, Srečko (author)

Vpliv klonov in maceracije na nekatere fizikalno-kemijske parametre belih vin sauvignon

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (865 kB)

1. TXT document (14 kB)

Contibutors: Veble, Vid (author) / Wondra, Mojmir (author) / Kač, Milica (author)

Source: Hmeljarski bilten

Numbering: 2013, volume 20, issue 1

Provider: Inštitut za hmeljarstvo in pivovarstvo Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (379 kB)

Influence of process parameters on the corrosion resistance of corrugated austenitic and duplex s...

Contibutors: Alvarez M., Sandra (author) / Bautista, Asunción (author) / Velasco, F. (author)

Numbering: 2013, volume 47, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (796 kB)

Influence of weld-process parameters on the material characterization of the friction-stir-welded...

Contibutors: Patil, Hiralal (author) / Soman, Sanjay (author)

1. PDF document (1876 kB)

Numbering: 2013, volume 47, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Predicting the microstructure evolution for the warm skew rolling of bearing steel balls under di...

Contibutors: Huo, Yuanming (author) / He, Tao (author) / Hu, Yujia (author) / Shen, Menglan (author) / Sun, Bo (author) / Zhao, Tong (author)

1. PDF document (4072 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Influence of process parameters on hydrogen content in steel melt

Contibutors: Knap, Matjaž (author) / Rozman, Alojz (author) / Lamut, Jakob (author)

1. PDF document (1479 kB)

Numbering: 2013, volume 60, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Optimization of the process parameters of friction-welded St-Al joints

Contibutors: Sahin, Mumin (author) / Misirli, Cenk (author) / Selvi, Selcuk (author)

1. PDF document (3412 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

The influence of MIM and sintering-process parameters on the mechanical properties of 316L SS

Contibutors: Berginc, Boštjan (author) / Kampuš, Zlatko (author) / Šuštaršič, Borivoj (author)

The influence of process parameters on the mechanical properties of friction-stir-welded joints o...

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (607 kB)

1. TXT document (25 kB)

Contibutors: Milčić, Miodrag (author) / Vuherer, Tomaž (author) / Radisavljević, Igor (author) / Milčić, Dragan (author) / Kramberger, Janez (author)

1. PDF document (1258 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Effect of process parameters on the microstructure and mechanical properties of friction-welded j...

Contibutors: Kirik, Ihsan (author) / Özdemir, Niyazi (author)

1. PDF document (2301 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Optimizacija procesnih parametrov pri kontinuiranem ulivanju jekla v železarni ACRONI Jesenice (1997, volume 31, issue 5)

Contibutors: Filipič, Bogdan (author) / Šarler, Božidar (author)

Source: Kovine zlitine tehnologije

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1033 kB)

1. TXT document (25 kB)

Influence of the process parameters and the mechanical properties of aluminum alloys on the burr ...

Contibutors: Köglü, Ugur (author)

Laser cladding in the use effects on nitrided and PVD coated steels used for die-casting using va...

Numbering: 2012, volume 46, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (186 kB)

1. TXT document (25 kB)

Contibutors: Bombač, David (author) / Fazarinc, Matevž (author) / Pleterski, Matej (author) / Tušek, Janez (author) / Muhič, Tadej (author)

1. PDF document (1622 kB)

Numbering: 2009, volume 56, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Analiza vpliva procesnih parametrov na kontinuirano ulivanje zlitine Al4.5CuPbBi

Contibutors: Sabolič Mijovič, Mojca (author) / Šarler, Božidar (author)

Source: Kovine zlitine tehnologije

Numbering: 1999, volume 33, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (285 kB)

1. TXT document (19 kB)

Optimization of multi-process parameters according to the surface quality criteria in the end mil...

Contibutors: Durmuş, Hülya (author)

Study of process parameters on Al-7.0 % Si-0.45 % Mg alloy cast trough strain induced melt activa...

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (498 kB)

1. TXT document (26 kB)

Contibutors: Sharma, Ashok (author) / Gupta, S. K. (author) / Srikanth, Madhulika (author)

1. PDF document (1016 kB)

Numbering: 2012, volume 59, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. TXT document (16 kB)

Possibilities of further increasing the hot workability of ledeburitic tool steels

Contibutors: Večko Pirtovšek, Tatjana (author) / Peruš, Iztok (author) / Kugler, Goran (author) / Fajfar, Peter (author) / Terčelj, Milan (author)

1. PDF document (6785 kB)

Numbering: 2014, volume 61, issue 4

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

Analysis of process parameters for a surface-grinding process based on the Taguchi method

Contibutors: Külekci, Mustafa Kemal (author)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (274 kB)

1. TXT document (19 kB)

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

Optimization of process parameters for machining of Al 7075 thin-walled structures

Contibutors: Borojević, S. (author) / Lukic, Dejan (author) / Milošević, Miloš (author) / Vukman, J. (author) / Kramar, Davorin (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1929 kB)

1. TXT document (38 kB)

Modelno podprt sistem za dinamično nastavljanje rezalnih parametrov pri postopku frezanja

Contibutors: Čuš, Franc (author) / Župerl, Uroš (author) / Kiker, Edvard (author)

Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...

Numbering: 2007, volume 53, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (292 kB)

1. TXT document (56 kB)

Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)

1. PDF document (1860 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Model-based tuning of process parameters for steady-state steel casting

Contibutors: Filipič, Bogdan (author) / Laitinen, Erkki (author)

Source: Informatica (Ljubljana)

Numbering: 2005, volume 29, issue 4

Provider: Slovensko društvo Informatika
(Obvezni izvod spletne publikacije)

1. PDF document (196 kB)

Laser drilling of alumina ceramics using solid state Nd

Contibutors: Rihakova, L. (author) / Chmelickova, H. (author)

Source: Advances in production engineering and management

Numbering: 2017, volume 12, issue 4

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1063 kB)

1. TXT document (30 kB)

The influence of selected treatment parameters with atmospheric plasma on the treatment process a...

Contibutors: Žigon, Jure (author) / Todorović, Dejan (author) / Pavlič, Matjaž (author) / Petrič, Marko (author) / Dahle, Sebastian (author)

Source: Les (Ljubljana)

Numbering: 2020, volume 69, issue 1

Provider: Zveza lesarjev Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (4415 kB)

1. TXT document (54 kB)

FDM process parameter selection by hybrid MCDM approach for flexural and compression strength max...

Contibutors: Begić-Hajdarević, Đerzija (author) / Klančnik, Simon (author) / Muhamedagić, K. (author) / Čekić, Ahmet (author) / Cohodar Husic, Maida (author) / Ficko, Mirko (author) / Gusel, Leo (author)

Source: Advances in production engineering and management

Numbering: 2024, volume 19, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (636 kB)

1. TXT document (32 kB)

Granulacija odpadnega mulja

Contibutors: Bombač, Andrej (author) / Orehek, Uroš (author)

Source: Ventil (Ljubljana)

Numbering: 2023, volume 29, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (666 kB)

Multi-response optimization of GTAW process parameters in terms of energy efficiency and quality

Contibutors: Van, An-Le (author) / Nguyen, Thai-Chung (author) / Bui, Huu-Toan (author) / Dang, Xuan-Ba (author) / Nguyen, Trung Thanh (author)

1. PDF document (1390 kB)

Numbering: 2024, volume 70, issue 5/6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The Effect of process parameters on the microstructure and mechanical performance of fiber laser-...

Contibutors: Yuce, Celalettin (author) / Tutar, Mumin (author) / Karpat, Fatih (author) / Yavuz, Nurettin (author) / Tekin, Gökhan (author)

1. PDF document (2058 kB)

Numbering: 2017, volume 63, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Selection of optimum process parameters in high speed CNC end-milling of composite materials usin...

Contibutors: Pare, Vikas (author) / Agnihotri, Geeta (author) / Krishna, Chimata (author)

1. PDF document (2892 kB)

Numbering: 2015, volume 61, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel

Contibutors: Bhatia, Anmol (author) / Wattal, Reeta (author)

1. PDF document (2581 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Experimental identification of optimized process parameters for FSW of AZ91C Mg alloy using quadr...

Contibutors: Satheesh, Chidambaram (author) / Sevvel, Pandian (author) / Senthil Kumar, R. (author)

1. PDF document (7404 kB)

Numbering: 2020, volume 66, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Influence of input parameters on the characteristics of the EDM process

Contibutors: Shabgard, Mohammadreza (author) / Seyedzavvar, Mirsadegh (author) / Oliaei, Samad Nadimi Bavil (author)

1. PDF document (1787 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Analysis of the effect of process parameters on part wall thickness variation in conventional met...

Contibutors: Šugár, Peter (author) / Šugárová, Jana (author) / Petrovič, Ján (author)

1. PDF document (1628 kB)

Numbering: 2016, volume 62, nr. 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Analysis of EDM process parameters on Inconel 718 using the grey-Taguchi and topsis methods

Contibutors: Yuvaraj, Thangavel (author) / Suresh, Paramasivam (author)

Study of influential parameters of the sphere indentation used for the control function of materi...

Numbering: 2019, volume 65, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (767 kB)

1. TXT document (32 kB)

Contibutors: Satošek, Roman (author) / Valeš, Michal (author) / Pepelnjak, Tomaž (author)

1. PDF document (2618 kB)

Numbering: 2019, volume 65, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (60 kB)

Numerical investigation of the effect of process parameters during Aluminium wheel flow-forming

Contibutors: Hwang, So Young (author) / Kim, Naksoo (author) / Lee, Cheol-soo (author)

Application of thermographic measurements for the determination of the impact of selected cutting...

Numbering: 2015, volume 61, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (939 kB)

1. TXT document (24 kB)

Contibutors: Zgórniak, Piotr (author) / Stachurski, Wojciech (author) / Ostrowski, Dariusz (author)

1. PDF document (1435 kB)

Numbering: 2016, volume 62, nr. 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Modeling of the influence of cutting parameters on the surface roughness, tool wear and cutting f...

Contibutors: Bajić, Dražen (author) / Celent, Luka (author) / Jozić, Sonja (author)

1. PDF document (2497 kB)

Numbering: 2012, volume 58, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Creep-feed grinding

Contibutors: Grigoriev, Sergey N. (author) / Starkov, Victor K. (author) / Gorin, Nikolay A. (author) / Krajnik, Peter (author) / Kopač, Janez (author)

1. PDF document (1906 kB)

Numbering: 2014, volume 60, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Effect of process parameters on the size and shape of nano- and micrometric zinc oxide

Contibutors: Pulit-Prociak, Jolanta (author) / Banach, Marcin (author) / Mirt, Ivan (author) / Cerovečki, Željko (author)

Study of the influence of key process parameters on furfural production

Numbering: 2016, volume 63, issue 2

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (602 kB)

1. TXT document (16 kB)

Contibutors: Fele Žilnik, Ljudmila (author) / Grilc, Viktor (author) / Mirt, Ivan (author) / Cerovečki, Željko (author)

Multi-objective optimization of the resistance spot-welding process parameters for the welding of...

Numbering: 2016, volume 63, issue 2

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (252 kB)

1. TXT document (46 kB)

Contibutors: Djuric, Aleksija (author) / Milčić, Dragan (author) / Klobčar, Damjan (author) / Marković, Biljana (author)

1. PDF document (2770 kB)

Numbering: 2021, volume 55, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Influence of process parameters on the extraction of flavanones from mandarin peel

Contibutors: Makovšek, Katja (author) / Knez, Željko (author) / Škerget, Mojca (author)

Experimental determination of numerical values of critical parameters in the gatifloxacin process...

Numbering: 2012, volume 59, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (233 kB)

1. TXT document (31 kB)

Contibutors: Ružič, Miloš (author)

Optimization of process parameters for a solid-state-welded AlSl 430 steel joint with the GRG rei...

Numbering: 2007, volume 54, issue 4

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (119 kB)

1. TXT document (36 kB)

Contibutors: Senthilkumar, G. (author) / Vinodkumar, V. (author) / Mayavan, T. (author) / Rathinasabapathi, G. (author) / David, Amos Gamaleal (author)

1. PDF document (2319 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Effect of electrochemical process parameters on the Hastelloy C-276 alloy for machining speed and...

Contibutors: Venugopal, P. (author) / Arul, Thayammal Ganesan (author) / Selvam, V. (author) / Saranya, K. (author)

1. PDF document (2926 kB)

Numbering: 2023, volume 57, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Razvoj dostavnih sistemov na osnovi liposomov z vgrajeno kakovostjo

Contibutors: Klemenc, Nejc (author) / Zorec, Barbara (author) / Zvonar Pobirk, Alenka (author)

Source: Farmacevtski vestnik

Numbering: 2024, volume 75, issue 1

Provider: Slovensko farmacevtsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (1711 kB)

1. TXT document (43 kB)

Performance study of EDM process parameters using TiC/ZrSiO sub 4 particulate-reinforced copper c...

Contibutors: Saminatharaja, Duraisivam (author) / Suresh, Periyakgounder (author) / Selvaraj, Mahalingam (author) / Elangandhi, Jamuna (author)

1. PDF document (2781 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Investigation and optimization of MQL system parameters in the roller-burnishing process of harde...

Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (2173 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Statistical modelling and optimization of TIG welding process parameters using Taguchi’s method

Contibutors: Omprakasam, S. (author) / Marimuthu, Kathiresan (author) / Raghu, R. (author) / Velmurugan, T. (author)

1. PDF document (4659 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Optimization of abrasive waterjet cutting by using the CODAS method with regard to interdependent...

Contibutors: Perec, Andrzej (author) / Kawecka-Wyrzykowska, Elżbieta (author) / Radomska-Zalas, Aleksandra (author) / Pude, Frank (author)

1. PDF document (2458 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

The effect of alloying additives and process parameters on the solidification characteristicsof t...

Contibutors: Mrvar, Jakob (author) / Tonkovič-Prijanovič, Marica (author)