dLib.si - industrija

Numbering: 2002, volume 48, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (407 kB)

Metoda raziskave nelinearnih upogibov valjev pri rotacijskem ofsetnem tiskarskem stroju

Contibutors: Augustaitis, Vytautas Kazimieras (author) / Šešok, Nikolaj (author) / Iljin, Igor (author)

Analitični model določevanja mehanskih lastnosti biopolimernih kompozitov - mikromehanski postopek

Numbering: 2006, volume 52, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (492 kB)

1. TXT document (70 kB)

Contibutors: Hančič, Aleš (author) / Kosel, Franc (author) / Campos, A. R. (author) / Cunha, A.M. (author) / Gantar, Gašper (author)

Računalniški in strojni vid v robotizirani montaži

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (333 kB)

1. TXT document (50 kB)

Contibutors: Herakovič, Niko (author)

Računalniško obvladovanje kakovosti v avtomobilski industriji

Numbering: 2007, volume 53, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (348 kB)

1. TXT document (64 kB)

Contibutors: Metljak, Drago (author) / Sluga, Alojzij (author)

1. PDF document (1281 kB)

Numbering: 2001, volume 47, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (60 kB)

Effects of the variation of torque motor parameters on servovalve performance

Contibutors: Gordić, Dušan (author) / Babić, Milun J. (author) / Jovičić, Nebojša (author) / Milovanović, Dobrica (author)

Tailoring functionality and durability of polymeric products by modifying processing conditions

Numbering: 2008, volume 54, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (667 kB)

1. TXT document (22 kB)

Contibutors: Florjančič, Urška (author) / Emri, Igor (author)

1. PDF document (2442 kB)

Numbering: 2008, volume 54, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (43 kB)

Razvoj izdelave avtomobilov in prevozov v Srednji Evropi v letih 2000 do 2020

Contibutors: Lešinský, Ján (author)

Programljivi logični krmilniki na temelju rešitve algebraične Riccatijeve enačbe

Numbering: 2001, volume 47, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (224 kB)

1. TXT document (21 kB)

Contibutors: Podržaj, Primož (author) / Kariž, Zoran (author)

Numbering: 2006, volume 52, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (488 kB)

Influence of technological factors on physical and mechanical properties of laminated prints

Contibutors: Havenko, Svetlana (author) / Bogorosh, Aleksandr (author) / Martynyuk, Marija (author) / Kibirkštis, Edmundas (author) / Vaitasius, Kęstutis (author)

Prispevek k parameterski identifikaciji dinamičnih sistemov z eno prostorsko stopnjo

Numbering: 2008, volume 54, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (315 kB)

1. TXT document (22 kB)

Contibutors: Jakšić, Nikola (author) / Boltežar, Miha (author)

Trenutne smeri razvoja pri spajanju materialov v avtomobilski industriji

Numbering: 2002, volume 48, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (342 kB)

1. TXT document (56 kB)

Contibutors: Tušek, Janez (author) / Klobčar, Damjan (author)

1. PDF document (1029 kB)

Numbering: 2004, volume 50, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (39 kB)

Odvijanje preje z navitka - obravnava kinematičnih in dinamičnih lastnosti preje

Contibutors: Praček, Stanislav (author) / Jakšić, Danilo (author)

Modelling and analysis of a combined electronic and micro-mechanical system

Numbering: 2005, volume 51, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (609 kB)

1. TXT document (59 kB)

Contibutors: Atanasijević-Kunc, Maja (author) / Kunc, Vinko (author) / Diaci, Janez (author) / Karba, Rihard (author)

Numbering: 2008, volume 54, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (277 kB)

Relativne prečne vibracije valjev tiskarskega stroja, ki pritiskajo drug ob drugega preko gumijas...

Contibutors: Augustaitis, Vytautas Kazimieras (author) / Šešok, Nikolaj (author)

1. PDF document (1059 kB)

Numbering: 2004, volume 50, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (63 kB)

Dinamični model nadzora temperature prostora s stropnim hlajenjem

Contibutors: Ćurko, Tonko (author) / Galaso, Ivan (author)

Large thermoplastic parts quality improvements using monitorized nozzle

Numbering: 2000, volume 46, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (157 kB)

1. TXT document (20 kB)

Contibutors: Fernandez, Angel (author) / Mercado, Daniel (author) / Javierre, Carlos (author) / Muniesa, Manuel (author)

Uporaba numeričnih simuliranj pri razvoju orodij za izdelavo pločevinastih sestavnih delov avtomo...

Numbering: 2008, volume 54, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (486 kB)

1. TXT document (23 kB)

Contibutors: Gantar, Gašper (author) / Ljevar, Marko (author) / Kuzman, Karl (author)

1. PDF document (1140 kB)

Numbering: 2001, volume 47, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (32 kB)

Günther Schuster, Plama-pur in slovenska industrija poliuretanov

Contibutors: Kastelic, Ciril (author)

Položajno zaznavalo za premični robot

Numbering: 1999, volume 45, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (95 kB)

1. TXT document (11 kB)

Contibutors: Mahkovic, Rajko (author)

Numbering: 2007, volume 53, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (547 kB)

Application of neural networks in evaluation of technological time

Contibutors: Šimunović, Goran (author) / Šarić, Tomislav (author) / Lujić, Roberto (author)

1. PDF document (7094 kB)

Numbering: 2008, volume 54, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (31 kB)

Optimiranje debeline brizganih plastičnih delov na podlagi simulacije Moldflow

Contibutors: Deng, Yimin (author) / Zheng, Di (author)

Investigation and development of a fiber-optic vibrometer for use in totally implantable hearing ...

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (393 kB)

1. TXT document (53 kB)

Contibutors: Djinović, Zoran (author) / Tomić, Miloš (author) / Vujanić, Aleksandar (author) / Pavelka, Robert (author) / Mitić, Sladjan (author) / Vujanić, Dušan (author) / Cordes, Mathias (author)

Flexibility and complexity of effective enterprises

Numbering: 2006, volume 52, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (481 kB)

1. TXT document (24 kB)

Contibutors: Maksimović, Rado (author) / Lalić, Bojan (author)

1. PDF document (6230 kB)

Numbering: 2008, volume 54, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (32 kB)

Razvoj varnega sedeža vozila

Contibutors: Malnarič, Vili (author) / Zupanc, Mirko (author) / Drenovec, Mitja (author)

Varjenje polizdelkov za nadaljnjo obdelavo - tehnologija prihodnosti v avtomobilski industriji

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (471 kB)

1. TXT document (25 kB)

Contibutors: Tušek, Janez (author)

Translation of extended Petri net model into ladder diagram and simulation with PLC

Numbering: 1999, volume 45, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (529 kB)

1. TXT document (44 kB)

Contibutors: Perme, Tomaž (author)

1. PDF document (1020 kB)

Numbering: 2009, volume 55, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (51 kB)

Prilagodljivi sistem za hlajenje orodij za brizganje plastike s pomočjo termoelektričnih modulov

Contibutors: Žagar, Boštjan (author) / Nardin, Blaž (author) / Glojek, Andrej (author) / Križaj, Dejan (author)

Omejitve, ki vplivajo na konstrukcijo stebla z ramenom in uporaba natančne geometrije

Numbering: 2006, volume 52, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (455 kB)

1. TXT document (53 kB)

Contibutors: Mullineux, Glen (author) / McPherson, C. J. (author) / Hicks, B. J. (author) / Berry, C. (author) / Medland, A. J. (author)

Preskuševališče za testiranje pedalnega sklopa

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (553 kB)

1. TXT document (44 kB)

Contibutors: Kernc, Janko (author) / Jurejevčič, Tomaž (author)

Geometric accuracy by 2-D printing model

Numbering: 1999, volume 45, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (351 kB)

1. TXT document (30 kB)

Contibutors: Galeta, Tomislav (author) / Kljajin, Milan (author) / Karakašić, Mirko (author)

Večkriterialno optimiranje avtomobilske konstrukcije z uporabo metode končnih elementov

Numbering: 2008, volume 54, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (806 kB)

1. TXT document (26 kB)

Contibutors: Glavač, Matej (author) / Ren, Zoran (author)

Izdelava politetrafluoretilenskih membran in njihovo laminiranje na tekstilne podlage

Numbering: 2007, volume 53, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (304 kB)

1. TXT document (32 kB)

Contibutors: Drev, Darko (author)

Namen in uporaba mednarodne baze podatkov o materialih v avtomobilski industriji

Numbering: 2006, volume 52, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (272 kB)

1. TXT document (37 kB)

Contibutors: Sečnjak, Marko (author) / Ačko, Bojan (author)

Numbering: 2005, volume 51, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (319 kB)

1. TXT document (20 kB)

Laserski anamorfni profilomer

Contibutors: Jezeršek, Matija (author) / Možina, Janez (author)

Ocena tlaka v kalupu za stroškovni model obstojnosti stroja za batno brizganje

Numbering: 2003, volume 49, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (636 kB)

1. TXT document (48 kB)

Contibutors: Goussard, Charl L. (author) / Basson, Anton H. (author)

Uncalibrated visual servo control with neural network

Numbering: 2007, volume 53, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (210 kB)

1. TXT document (41 kB)

Contibutors: Klobučar, Rok (author) / Čas, Jure (author) / Šafarič, Riko (author) / Brezočnik, Miran (author)

1. PDF document (1007 kB)

Numbering: 2008, volume 54, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (27 kB)

Cavitation as a potential technology for wastewater management

Contibutors: Sežun, Mija (author) / Kosel, Janez (author) / Zupanc, Mojca (author) / Hočevar, Marko (author) / Vrtovšek, Janez (author) / Petkovšek, Martin (author) / Dular, Matevž (author)

1. PDF document (1045 kB)

Numbering: 2019, volume 65, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Design and evaluation of a hierarchical control algorithm for an electric active stabilizer bar s...

Contibutors: Kong, Zhenxing (author) / Pi, Dawei (author) / Wang, Xianhui (author) / Wang, Hongliang (author) / Chen, Shan (author)

Control-oriented modelling with experimental verification and design of the appropriate gains of ...

Numbering: 2016, volume 62, nr. 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (683 kB)

1. TXT document (37 kB)

Contibutors: Yildiz, Ahmet (author) / Kopmaz, Osman (author)

1. PDF document (1348 kB)

Numbering: 2017, volume 63, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Trajectory-tracking control for manipulators based on fuzzy equivalence and a terminal sliding mode

Contibutors: Liu, Youyu (author) / Li, Yi (author) / Zhang, Xuyou (author) / Chen, Bo (author)

1. PDF document (4228 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Active vibration control of a mechanical servo high-speed fine-blanking press

Contibutors: Liu, Yanxiong (author) / Shu, Yuwen (author) / Hu, Wentao (author) / Zhao, Xinhao (author) / Xu, Zhicheng (author)

1. PDF document (3724 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Fault diagnosis of rotation vector reducer for industrial robot based on a convolutional neural n...

Contibutors: Yang, Shuai (author) / Luo, Xing (author) / Li, Chuan (author)

1. PDF document (2585 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

RBF neural network sliding mode control method based on backstepping for an electro-hydraulic act...

Contibutors: Li, Wending (author) / Shi, Guanglin (author) / Chunjiang, Zhao (author) / Liu, Hongyu (author) / Fu, Junyong (author)

1. PDF document (3361 kB)

Numbering: 2020, volume 66, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Mathematical model of an autoclave

Contibutors: Preglej, Aleksander (author) / Karba, Rihard (author) / Steiner, Igor (author) / Škrjanc, Igor (author)

1. PDF document (1066 kB)

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Measuring selected parameters of polypropylene fibre heat exchangers

Contibutors: Čarnogurská, Mária (author) / Příhoda, Miroslav (author) / Lázár, Marián (author) / Jasminská, Natália (author) / Gallik, Róbert (author) / Kubik, Michal (author)

1. PDF document (1492 kB)

Numbering: 2016, volume 62, nr. 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Nonlinear control of a hybrid batch reactor

Contibutors: Štampar, Simon (author) / Soklič, Saša (author) / Karer, Gorazd (author)

1. PDF document (1589 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Measurement of wave attenuation in buried plastic water distribution pipes

Contibutors: Almeida, Fabrício César Lobato de (author) / Brennan, Michael John (author) / Joseph, Phillip Frederick (author) / Dray, Simon (author) / Whitfield, Stuart (author) / Paschoalini, Amarildo Tabone (author)

1. PDF document (2058 kB)

Numbering: 2014, volume 60, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Control system design for a centrifuge motion simulator based on a dynamic model

Contibutors: Vidaković, Jelena (author) / Kvrgić, Vladimir (author) / Lazarević, Mihailo P. (author)

1. PDF document (1174 kB)

Numbering: 2018, volume 64, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Position control with parameter adaptation for a nano-robotic cell

Contibutors: Škorc, Gregor (author) / Čas, Jure (author) / Brezovnik, Simon (author) / Šafarič, Riko (author)

Design and analysis of double-side meshing and dual-phase driving timing silent chain system

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (753 kB)

1. TXT document (30 kB)

Contibutors: Cheng, Yabing (author) / Yin, Shuaibing (author) / Wang, Xiaopeng (author) / An, Lichi (author) / Liu, Huan (author)

1. PDF document (1814 kB)

Numbering: 2016, volume 62, nr. 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Data-driven model-free control of torque-applying system for a mechanically closed-loop test rig ...

Contibutors: Parvaresh, Aida (author) / Mardani, Mohsen (author)

1. PDF document (1100 kB)

Numbering: 2020, volume 66, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

A weighted mean square error approach to the robust optimization of the surface roughness in an A...

Contibutors: Almeida, Fabrício Alves de (author) / Gomes, Guilherme Ferreira (author) / Paula, Vinícius Renó de (author) / Correa, Joao Ederson (author) / Paiva, Anderson Paulo de (author) / Freitas Gomes, José Henrique de (author) / Turrioni, Joao Batista (author)

1. PDF document (1194 kB)

Numbering: 2018, volume 64, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Comparison of vertical and inclined toothbrush filaments

Contibutors: Goldschmidtboeing, Frank (author) / Doll, Alexander (author) / Stoerkel, Ulrich (author) / Neiss, Sebastian (author) / Woias, Peter (author)

1. PDF document (2971 kB)

Numbering: 2014, volume 60, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Towards the maintenance principles of cyber-physical systems

Contibutors: Ruiz-Arenas, Santiago (author) / Horváth, Imre (author) / Mejía-Gutiérrez, Ricardo (author) / Opiyo, Eliab Z. (author)

Customizing products through application of group technology

Numbering: 2014, volume 60, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (791 kB)

1. TXT document (86 kB)

Contibutors: Suzić, Nikola (author) / Stevanov, Branislav (author) / Ćosić, Ilija (author) / Anišić, Zoran (author) / Sremčev, Nemanja (author)

1. PDF document (2657 kB)

Numbering: 2012, volume 58, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

An enhanced control technique for the elimination of residual vibrations in flexible-joint manipu...

Contibutors: Conker, Caglar (author) / Kilic, Ali (author) / Mistikoglu, Selcuk (author) / Kapucu, Sadettin (author) / Yavuz, Hakan (author)

1. PDF document (1837 kB)

Numbering: 2014, volume 60, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Multivariable predictive functional control of an autoclave

Contibutors: Preglej, Aleksander (author) / Steiner, Igor (author) / Blažič, Sašo (author)

1. PDF document (1046 kB)

Numbering: 2013, volume 59, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Surveying healthcare workers to improve the design, wearer experience and sustainability of PPE i...

Contibutors: Šterman, Sonja (author) / Townsend, Katherine (author) / Salter, Eloise (author) / Harrigan, Karen (author)

1. PDF document (1692 kB)

Numbering: 2022, volume 68, iss. 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (57 kB)

Public handling of protective masks from use to disposal and recycling options to new products

Contibutors: Remic, Katarina (author) / Erjavec, Alen (author) / Volmajer Valh, Julija (author) / Šterman, Sonja (author)

1. PDF document (2132 kB)

Numbering: 2022, volume 68, iss. 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Multi-response optimization of the tribological behaviour of PTFE-based composites via Taguchi gr...

Contibutors: Ibrahim, Musa Alhaji (author) / Çamur, Hüseyin (author) / Savaş, Mahmut A. (author) / Sabo, Alhassan Kawu (author)

Limit-protection method for workspace of a parallel power head

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (876 kB)

1. TXT document (39 kB)

Contibutors: Ni, Yanbing (author) / Lu, Wenliang (author) / Jia, Shilei (author) / Lu, Chenghao (author) / Zhang, Ling (author) / Yang, Wen (author)

1. PDF document (2507 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Adaptive super-twisting sliding mode control of hydraulic servo actuator with nonlinear features ...

Contibutors: Wan, Zhenshuai (author) / Fu, Yu (author) / Yue, Longwang (author) / Liu, Chong (author)

1. PDF document (2730 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

The Application of neural networks to modular arrangements of predetermined time standards

Contibutors: Basitere, Emmanuel (author) / Daniyan, Ilesanmi (author) / Mpofu, Khumbulani (author) / Adeodu, Adefemi (author)

Active disturbance rejection control algorithm for the driven branch chain of a polishing robot

Numbering: 2023, volume 69, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (812 kB)

1. TXT document (51 kB)

Contibutors: Dong, Kaifeng (author) / Li, Jun (author) / Lv, Mengyao (author) / Li, Xin (author) / Gu, Wei (author) / Cheng, Gang (author)