dLib.si - search results

1. PDF document (5720 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (290 kB)

Incorporation of a simplified mechanical joint model into numerical analysis

Contibutors: Glavan, Mitja (author) / Klemenc, Jernej (author) / Malnarič, Vili (author) / Šeruga, Domen (author)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (845 kB)

Research on the traction and obstacle surmounting performance of an adaptive pipeline plugging robot

Contibutors: Yan, Hongwei (author) / Li, Jian (author) / Kou, Ziming (author) / Liu, Yi (author) / Li, Pengcheng (author) / Wang, Lu (author)

Detection of outer wall defects on steel pipe using an encircling Rotating electromagnetic Field ...

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (966 kB)

1. TXT document (53 kB)

Contibutors: Yin, Xiaokang (author) / Gu, Zhuoyong (author) / Wang, Wei (author) / Zhang, Xiaorui (author) / Yuan, Xin'an (author) / Li, Wei (author) / Chen, Guoming (author)

1. PDF document (1148 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Research on real-time reliability evaluation method integrated with online fault diagnosis

Contibutors: Liu, Peng (author) / Shen, Dagang (author) / Cao, Jinfeng (author)

1. PDF document (1685 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Early detection of defects in gear systems using autocorrelation of morlet wavelet transforms

Contibutors: Ayad, Mouloud (author) / Saoudi, Kamel (author) / Rezki, Mohamed (author) / Benziane, Mourad (author) / Arabi, Abderrazak (author)

1. PDF document (1228 kB)

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Novel unsteady state method of measuring permeability tested on fabric materials

Contibutors: Sitar, Anže (author)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (942 kB)

Nonlinear coupled dynamic modelling of driver-seat-cab system and biomechanical behaviour prediction

Contibutors: Zhao, Leilei (author) / Yu, Yuewei (author) / Cao, Jianhua (author)

The measurement of the wear of tie rod end components

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (841 kB)

1. TXT document (45 kB)

Contibutors: Wozniak, Marek (author) / Rylski, Adam (author) / Siczek, Krzysztof (author)

1. PDF document (1459 kB)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (120 kB)

Simulation and experimental research on electrical control anti-backlash based on a novel type of...

Contibutors: Wang, Guangjian (author) / Zhu, Dongdong (author) / Zou, Shuaidong (author) / Jiang, Yujiang (author) / Tian, Xin (author)

1. PDF document (4112 kB)

Numbering: 2022, volume 68, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (53 kB)

Cavitation erosion modelling on a radial divergent test section using RANS

Contibutors: Kevorkijan, Luka (author) / Lešnik, Luka (author) / Biluš, Ignacijo (author)

1. PDF document (1215 kB)

Numbering: 2022, volume 68, iss. 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Strojniški vestnik (2022, volume 68, issue 4)

Strojniški vestnik (2022, volume 68, issue 3)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (16 MB)

1. TXT document (380 kB)

1. PDF document (7592 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (272 kB)

Strojniški vestnik (2022, volume 68, issue 2)

1. PDF document (4975 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (309 kB)

Effect of Immersion media for polyester composite reinforced with chicken feathers on creep behavior

Contibutors: Abed, Balsam H. (author) / Battawi, Ali A. (author) / Khuder, Abdul Wahab H. (author)

1. PDF document (1758 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Investigation of dynamic behaviour of four-leg hydraulic support under double-impact load

Contibutors: Xie, Yunyue (author) / Zeng, Qingliang (author) / Jiang, Kao (author) / Meng, Zhaosheng (author) / Li, Qinghai (author) / Zhang, Junming (author)

1. PDF document (3847 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Enhancing the performance of a vapour compression refrigerator system using R134a with a CuO/CeO2...

Contibutors: Mohamed, HudaElslam (author) / Camdali, Unal (author) / Biyikoglu, Atilla (author) / Aktas, Metin (author)

1. PDF document (2658 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (63 kB)

Indices to evaluate the performance of force transmission and constraint for parallel mechanisms

Contibutors: Zhang, Tie (author) / Cao, Yachao (author) / Ma, Guangcai (author)

1. PDF document (3121 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Optimization of friction stir welding operation using optimal Taguchi-based ANFIS and genetic alg...

Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (3165 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Determination of Limiting Dome Height (LDH) values for Inconel 718 alloy sheet using FEA and hemi...

Contibutors: Ganesan, Kanmani (author) / Sambasivam, Saravanan (author) / Ramadass, Rajesh (author)

1. PDF document (1890 kB)

Numbering: 2022, volume 68, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Comparison study of four commercial SARS-CoV-2-rapid antigen tests

Contibutors: Jelen, Žiga (author) / Anžel, Ivan (author) / Rudolf, Rebeka (author)

1. PDF document (2316 kB)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Robust and intuitive model for COVID-19 epidemic in Slovenia

Contibutors: Leskovar, Matjaž (author) / Cizelj, Leon (author)

1. PDF document (2304 kB)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Thermal mechanical coupling analysis of a flexible spoke non-pneumatic tire

Contibutors: Fu, Hongxun (author) / Liang, Xuemeng (author) / Wang, Yan (author) / Ku, Laiyun (author) / Xiao, Zhen (author)

1. PDF document (3625 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation and optimization of MQL system parameters in the roller-burnishing process of harde...

Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (2173 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimization of FSW processing factors on hardness for dissimilar AA6061-T6 and AZ31B O alloys

Contibutors: Vasantha Kumar, Karutha Pandian (author) / Balasubramanian, Muthusamy (author)

1. PDF document (2388 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Error prediction for large optical mirror processing robot based on deep learning

Contibutors: Jin, Zujin (author) / Cheng, Gang (author) / Xu, Shichang (author) / Yuan, Dunpeng (author)

1. PDF document (1658 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Analysis of educational building’s ventilation suitability to prevent the spread of coronavirus (...

Contibutors: Osterman, Eneja (author) / Stritih, Uroš (author) / Dovjak, Mateja (author) / Vaupotič, Janja (author) / Verbajs, Tomaž (author) / Mlakar, Urška (author) / Zavrl, Eva (author)

Optimisation of PLA filament consumption for 3D printing using the annealing method in home envir...

Numbering: 2022, volume 68, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (973 kB)

1. TXT document (29 kB)

Contibutors: Djukanović, Milena (author) / Damjanović, Milanko (author) / Radunović, Luka (author) / Jovanović, Mihailo (author)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (650 kB)

Adaptive electromagnetic vibration absorber for a multimode structure

Contibutors: Mohamed, Khaled S. (author) / Amri, Fatin (author) / Elboraey, Mostafa (author) / Nordin, N.H. Diyana (author) / Muthalif, Asan (author)

1. PDF document (1351 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Statistical modelling and optimization of TIG welding process parameters using Taguchi’s method

Contibutors: Omprakasam, S. (author) / Marimuthu, Kathiresan (author) / Raghu, R. (author) / Velmurugan, T. (author)

1. PDF document (4659 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Surveying healthcare workers to improve the design, wearer experience and sustainability of PPE i...

Contibutors: Šterman, Sonja (author) / Townsend, Katherine (author) / Salter, Eloise (author) / Harrigan, Karen (author)

1. PDF document (1692 kB)

Numbering: 2022, volume 68, iss. 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (57 kB)

Public handling of protective masks from use to disposal and recycling options to new products

Contibutors: Remic, Katarina (author) / Erjavec, Alen (author) / Volmajer Valh, Julija (author) / Šterman, Sonja (author)

1. PDF document (2132 kB)

Numbering: 2022, volume 68, iss. 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Bacterial filtration efficiency of different masks

Contibutors: Košir, Tamara (author) / Fric, Katja (author) / Filipić, Arijana (author) / Kogovšek, Polona (author)

1. PDF document (1709 kB)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Correlation between air pollution and the spread and development of COVID-19 related disease

Contibutors: Marčenko, Erik (author) / Lampret, Žiga (author) / Prek, Matjaž (author)

The prevalence of COVID-19 among health care personnel in a University Hospital by the end of 202...

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (458 kB)

1. TXT document (46 kB)

Contibutors: Blinc, Aleš (author) / Buturović-Ponikvar, Jadranka (author) / Fras, Zlatko (author)

Numbering: 2022, volume 68, issue 4, spec. iss.: sars-cov-2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (653 kB)

Strojniški vestnik (2022, volume 68, issue 6)

Measuring the efficiency of reduction gearboxes for electric utility vehicles during specific dri...

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (18 MB)

1. TXT document (279 kB)

Contibutors: Petr, Tomas (author) / Brousek, Josef (author) / Jezek, Jakub (author) / Zvolsky, Tomas (author) / Vozenilek, Robert (author)

1. PDF document (1000 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (52 kB)

Switch semi-active control of the floating raft vibration isolation system

Contibutors: Weng, Zeyu (author) / Liu, Shengli (author) / Xu, Teqi (author) / Wu, Xiaoyu (author) / Wang, Zhe (author) / Tang, Jie (author)

1. PDF document (2313 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Effect of vibration and noise measuring points distribution on the sensitivity of pump cavitation...

Contibutors: Zhou, Runze (author) / Chen, Hui (author) / Dong, Liang (author) / Liu, Houlin (author) / Chen, Zeyu (author) / Zhang, Yuhang (author) / Cheng, Zhiming (author)

1. PDF document (5171 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Optimization of tuned mass damper location for enhanced chatter suppression in thin-wall milling

Contibutors: Selvakumar, Mohanraj (author) / Venugopal, Prabhu Raja (author) / Velayudhan, Gautham (author)

1. PDF document (2429 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Fatigue life prediction of butt weld joint with weld defects at multiple locations

Contibutors: Gnanasigamony Thankareathenam, Ebron Shaji (author) / Venugopal, Prabhu Raja (author) / Velayudhan, Gautham (author) / Selvakumar, Mohanraj (author)

1. PDF document (1334 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Multi-response optimization of the tribological behaviour of PTFE-based composites via Taguchi gr...

Contibutors: Ibrahim, Musa Alhaji (author) / Çamur, Hüseyin (author) / Savaş, Mahmut A. (author) / Sabo, Alhassan Kawu (author)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (876 kB)

Numerical analysis on a constant rate of kinetic energy change based a two-stage ejector-diffuser...

Contibutors: Sethi, Virendra Kumar (author) / Kumar, Anil (author) / Kumar Yadav, Surendra (author) / Yadav, Anshul (author) / Prasad, Lalta (author) / Winczek, Jerzy Adam (author)

Short-term creep behaviour of different polymers used in additive manufacturing under different t...

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (608 kB)

1. TXT document (26 kB)

Contibutors: Dogan, Oguz (author)

Preparation and thermal characterization of nanographene- enhanced fatty acid-based solid-liquid ...

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (779 kB)

1. TXT document (34 kB)

Contibutors: Kittusamy, Ragul Kumar (author) / Rajagopal, Velavan (author) / Felix, Paul Gregory (author)

1. PDF document (2863 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Optimization of in-vehicle carbon dioxide level in a 5-seat car

Contibutors: Jayasankar, Prabhakaran (author) / Subbaian, Jayabal (author)

1. PDF document (5552 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (48 kB)

Optimization in the resistant spot-welding process of AZ61 magnesium alloy

Contibutors: Afshari, Davood (author) / Ghaffari, Ali (author) / Barsum, Zuheir (author)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (819 kB)

Effect of dual-stage ageing and RRA treatment on the three-body abrasive wear of the AW7075 alloy

Contibutors: Lachowicz, Marzena M. (author) / Leśniewski, Tadeusz (author) / Lachowicz, Maciej B. (author)

Nitriding HS6-5-2 steel in inductively coupled plasma

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (21 MB)

1. TXT document (38 kB)

Contibutors: Binienda, Marek (author) / Pietrasik, Robert (author) / Pawęta, Sylwester (author) / Matczak, Krzysztof (author) / Krotewicz, Witold (author)

1. PDF document (3557 kB)

Numbering: 2022, volume 68, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Fractal geometry as an effective heat sink

Contibutors: Ramšak, Matjaž (author)

1. PDF document (3049 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

MTPA- and MSM-based vibration transfer of 6-DOF manipulator for anchor drilling

Contibutors: Liu, Youyu (author) / Ma, Liteng (author) / Yang, Siyang (author) / Yuan, Liang (author) / Chen, Bo (author)

1. PDF document (3411 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (41 kB)

Functional surface layer strengthening and wear resistance increasing of a low carbon steel by el...

Contibutors: Kombayev, Kuat (author) / Muzdybayev, Murat (author) / Muzdybayeva, Alfiya (author) / Myrzabekova, Dinara (author) / Wieleba, Wojciech (author) / Leśniewski, Tadeusz (author)

1. PDF document (5008 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Industrial experimental research as a contribution to the development of an experimental model of...

Contibutors: Wrzochal, Mateusz (author) / Adamczak, Stanisĺaw (author) / Piotrowicz, Grzegorz (author) / Wnuk, Sylwester (author)

1. PDF document (1485 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (34 kB)

Limit-protection method for workspace of a parallel power head

Contibutors: Ni, Yanbing (author) / Lu, Wenliang (author) / Jia, Shilei (author) / Lu, Chenghao (author) / Zhang, Ling (author) / Yang, Wen (author)

1. PDF document (2507 kB)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

Nonlinear vibration analysis of functionally graded porous plates reinforced by graphene platelet...

Contibutors: Huang, Xiaolin (author) / Wang, Chengzhe (author) / Wang, Jiaheng (author) / Wei, Nengguo (author)

Strojniški vestnik (2022, volume 68, issue 10)

Numbering: 2022, volume 68, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (932 kB)

1. TXT document (44 kB)

1. PDF document (4125 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (343 kB)

Strojniški vestnik (2022, volume 68, issue 5)

1. PDF document (5459 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (337 kB)

Strojniški vestnik (2022, volume 68, issue 7/8)

1. PDF document (7093 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (243 kB)

Strojniški vestnik (2022, volume 68, issue 9)

1. PDF document (4883 kB)

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (246 kB)

Strojniški vestnik (2022, volume 68, issue 11)

Scalability solutions in blockchain-supported manufacturing

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (12 MB)

1. TXT document (261 kB)

Contibutors: Rožman, Nejc (author) / Corn, Marko (author) / Škulj, Gašper (author) / Diaci, Janez (author) / Podržaj, Primož (author)

1. PDF document (1212 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (129 kB)

A new device proposed for industrial measurement of rolling bearing friction torque

Contibutors: Wrzochal, Mateusz (author) / Adamczak, Stanisĺaw (author) / Domagalski, Ryszard (author) / Piotrowicz, Grzegorz (author) / Wnuk, Sylwester (author)

1. PDF document (2141 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

The nickel aluminide coatings obtained on small holes produced with the EDD method

Contibutors: Trajer, Marcin (author) / Pyclik, Łukasz (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (4566 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Thermal evaluation of multilayer wall with a hat-stringer in aircraft design

Contibutors: Brazhenko, Volodymyr (author) / Qiu, Yibo (author) / Cai, Jiancheng (author) / Wang, Dongyun (author)

1. PDF document (2140 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Development of a new expert system for diagnosing marine diesel engines based on real-time diagno...

Contibutors: Gharib, Hla (author) / Kovács, György (author)

1. PDF document (1477 kB)

Numbering: 2022, volume 68, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Strojniški vestnik (2022, volume 68, issue 12)

Production of the design developed to assembly filter parts, optimization of welding and field test

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (12 MB)

1. TXT document (258 kB)

Contibutors: Maden, Hakan (author) / Cetinkaya, Kerim (author)

1. PDF document (2350 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

Rigid-hyperelastic coupling dynamic model and dynamic characteristics of spring type of traction ...

Contibutors: Zhao, Jianguo (author) / Wang, Binfan (author) / Liu, Qingyou (author) / Wang, Guorong (author) / Zeng, Xiangfeng (author)

1. PDF document (2145 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Optimization techniques for green layout design in manufacturing industries

Contibutors: Sherfudeen, Sheik Sulaiman (author) / Athinamilagi, Muthiah (author) / Venkataramanujam, Janakiraman (author)

1. PDF document (1500 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Effect of tool geometry in stir zone for hook formation of dissimilar aluminium alloys

Contibutors: Navaneethakannan, Nandakumar (author) / Sivanandi, Periyasamy (author) / Somasekaran, Balakrishnan (author)

1. PDF document (1463 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Experimental research on transmission characteristics of elliptic gear transmission systems

Contibutors: Dong, Changbin (author) / Pei, Wangpeng (author) / Liu, Yongping (author) / Wei, Yongqiao (author) / Li, Dawei (author) / Guo, Rui (author) / Ren, Zhongtao (author)

1. PDF document (2337 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Comparison of load-carrying capacity, wear, and resource of metal-polymer corrected spur gears wi...

Contibutors: Chernets, Myron (author) / Opielak, Marek (author) / Kornienko, Anatolii (author)

1. PDF document (1099 kB)

Numbering: 2022, volume 68, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Numerical and physical models of specimens with self-pivoting rivet joints and clinch joints befo...

Contibutors: Šeruga, Domen (book designer) / Glavan, Mitja (book designer) / Malnarič, Vili (book designer) / Klemenc, Jernej (book designer)

Multi-objective optimization of the chebyshev lambda mechanism

Numbering: 2022, volume 68, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (695 kB)

1. TXT document (21 kB)

Contibutors: Miler, Daniel (author) / Birt, Dominik (author) / Hoić, Matija (author)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (846 kB)

Investigation of laser ablative micromachining of Al/TiB sub 2 nanocomposite

Contibutors: Manikandan Rajam, Pratheesh Kumar (author) / Nampoothiri, Jayakrishnan (author)

1. PDF document (1361 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation of machining parameters in thin-walled plate milling using a fixture with cylindric...

Contibutors: Natarajan, Muthu Mekala (author) / Chinnasamy, Balamurugan (author) / Alphonse, Bovas Herbert Bejaxhin (author)

1. PDF document (1196 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Design, manufacturing, and thermodynamic analysis of a gamma-type stirling engine powered by sola...

Contibutors: Topgül, Tolga (author)

1. PDF document (3349 kB)

Numbering: 2022, volume 68, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Adaptive super-twisting sliding mode control of hydraulic servo actuator with nonlinear features ...

Contibutors: Wan, Zhenshuai (author) / Fu, Yu (author) / Yue, Longwang (author) / Liu, Chong (author)