Magnesium and its alloys are widely used in many industrial applications because of their high specific strength (strength/density) ratio. However, these applications are still restricted by the relatively poor surface resistance of these materials. To overcome the inherent drawbacks a useful solution is to deposit a protective coating on the magnesium alloys. The sol-gel process is an effective method for fabricating oxide films on a magnesium alloy in order to produce a higher corrosion resistance. The objective of this study is to comparatively investigate the process and properties of repeated sol-gel oxide (ZrO2, Al2O3) coatings. The coatings were characterized by SEM, XRD, ellipsometry and the effects of the process on their properties were comparatively analysed.

Rights

URN

URN:NBN:SI:DOC-WY23MW05

COBISSID

1050538

Added

06.11.2015

Metadata

Citation

APA:

Altuncu, Ekrem, Alanyali, Hasan (2014). The applicability of sol-gel oxide films and their characterisation on a magnesium alloy. Materiali in tehnologije, volume 48, issue 2, str. 289-292. URN:NBN:SI:DOC-WY23MW05 from http://www.dlib.si

MLA:

Altuncu, Ekrem, Alanyali, Hasan. "The applicability of sol-gel oxide films and their characterisation on a magnesium alloy." Materiali in tehnologije volume 48. issue 2 (2014) str. 289-292.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-WY23MW05>

Materiali in tehnologije
2000-
(Assembly record)

The applicability of sol-gel oxide films and their characterisation on a magnesium alloyUporabnost sol-gel oksidnih tankih plasti in njihova karakterizacija na magnezijevi zlitini

The applicability of sol-gel oxide films and their characterisation on a magnesium alloy
Uporabnost sol-gel oksidnih tankih plasti in njihova karakterizacija na magnezijevi zlitini