Specific surface engineering technologies are widely used to improve decesively product whereas thin hard coatings are increasingly adopted in a broad range of industries. The quality assurance infrastructure for coated products is essential to determine their functional properties. For the reliable assessment of the intrinsic properties (coating thickness, hardness, chemical composition, adhesion) as well as the tribological performance standardised test methods are required. International groups from research institutes and industries are working on this actual topic to develop comprehensive test methodologies including instrument calibration and reference samples. These will then be proposed to committees for standardisation for adoption as European standards.

Rights

URN

URN:NBN:SI:DOC-KTFVZH8E

COBISS ID

71082

Added

22.07.2011

Metadata

Citation

APA:

Mayr, Peter, Vetters, H., Schulz, A. (1997). Methods for the validation of advanced thin hard protective coatings - an European program, volume 31, issue 6. URN:NBN:SI:DOC-KTFVZH8E from http://www.dlib.si

MLA:

Mayr, Peter, Vetters, H., Schulz, A.. Methods for the validation of advanced thin hard protective coatings - an European program. Inštitut za kovinske materiale in tehnologije
Železarna Jesenice
Železarna Ravne
Železarna Štore, 1997.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-KTFVZH8E>

Kovine zlitine tehnologije
1992-1999
(Assembly record)

prejšnja

Izboljšanje kakovosti gredic kvadrat 180 mm z omejitvijo ohlajanja
1997
(Previous issue)

naslednja

Mechanical and microstructural properties of duplex steel
1997
(Next issue)

Methods for the validation of advanced thin hard protective coatings - an European programMetoda za validacijo naprednih tankih zaščitnih plasti - evropski program

Methods for the validation of advanced thin hard protective coatings - an European program
Metoda za validacijo naprednih tankih zaščitnih plasti - evropski program