The solution to an engine-cooling problem, which occured during the testing of a water-cooled internal combustion engine in a test stand for air-cooled internal combustion engines, is presented in this article. A water-to-water heat exchanger and a control valve were incorporated into an existing engine-cooling system. The cooling-water temperature was controled with a computer, which was also used for the date acquisition. The system was tested in the laboratory and allows to set the cooling-water temperature regardless of the operating regime of the engine.

Rights

URN

URN:NBN:SI:DOC-BCSAFDRE

COBISSID

4999707

Added

16.09.2009

Metadata

Citation

APA:

Bombek, Gorazd, Hribernik, Aleš (2001). Krmiljenje temperature hladilne vode motorja z notranjim zgorevanjem v preskuševališču. Strojniški vestnik, volume 47, issue 12, str. 703-709. URN:NBN:SI:DOC-BCSAFDRE from http://www.dlib.si

MLA:

Bombek, Gorazd, Hribernik, Aleš. "Krmiljenje temperature hladilne vode motorja z notranjim zgorevanjem v preskuševališču." Strojniški vestnik volume 47. issue 12 (2001) str. 703-709.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-BCSAFDRE>

Strojniški vestnik
1955-
(Assembly record)

številka

Strojniški vestnik
2001
(Complete issue)

Krmiljenje temperature hladilne vode motorja z notranjim zgorevanjem v preskuševališčuControl of the cooling-water temperature for an combustion engine on a test stand

Krmiljenje temperature hladilne vode motorja z notranjim zgorevanjem v preskuševališču
Control of the cooling-water temperature for an combustion engine on a test stand