dLib.si - obvezni izvod spletnih publikacij

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (915 kB)

Effect of severe plastic and heavy cold deformation on the structural and mechanical properties o...

Contibutors: Palán, Jan (author) / Šutta, P. (author) / Kubina, Tomáš (author) / Dománková, Mária (author)

1. PDF document (1140 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Laboratory accreditation - confidence in the activities of conformity assessment of products

Contibutors: Klobodanović, Azemina (author) / Oruč, Mirsada (author)

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (434 kB)

Determination of the deformational energy during slab-width rolling on an edger mill

Contibutors: Vode, Franci (author) / Jaklič, Anton (author) / Robič, Roman (author) / Košir, Anton (author) / Perko, Franci (author) / Novak, Jani (author)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (577 kB)

Mathematical models for evaluating the influence of degradation on the tensile and flexural prope...

Contibutors: Oladele, Isiaka Oluwole (author) / Adesoji Adediran, Adeolu (author) / Akinwekomi, Akeem Damilola (author) / Adara, Peace Pamilerin (author)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (872 kB)

Evaluation of the thermal resistance of selected bentonite binders

Contibutors: Beňo, Jaroslav (author) / Vontorová, Jiřina (author) / Matějka, Vlastimil (author) / Gál, Karel (author)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

Monitoring the effect of quartz-sand replacement by amorphous-silica raw material on the microstr...

Contibutors: Hušt`avová, Jana (author) / Černý, Vít (author) / Drochytka, Rostislav (author)

1. PDF document (1385 kB)

Numbering: 2020, volume 54, iss. 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Estimation of the fatigue threshold values for a crack propagating through a bi-material interfac...

Contibutors: Náhlík, Lubos (author)

Transport električnega naboja v organskih polprevodnikih, simulacija po metodi Monte Carlo

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (113 kB)

1. TXT document (15 kB)

Contibutors: Pavlica, Egon (author) / Hudej, Robert (author) / Bratina, Gvido (author)

Numbering: 2003, volume 37, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (183 kB)

Comparison of the surface and anticorrosion properties of SiOsub2 and TiOsub2 nanoparticle epoxy ...

Contibutors: Conradi, Marjetka (author) / Kocijan, Aleksandra (author)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (541 kB)

Use of numerical simulation in the production of porous-metal castings

Contibutors: Radkovský, Filip (author) / Merta, Václav (author)

1. PDF document (1037 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Oxidation of molybdenum by low-energy oxygen-ion bombardment

Contibutors: Jelovica Badovinac, Ivana (author) / Kavre, Ivna (author) / Šarić, Iva (author) / Peter, Robert (author) / Petravić, Mladen (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (697 kB)

Increasing the wear resistance of Al-Mg components using thermal-spray coatings

Contibutors: Lukauskaitë, Raimonda (author) / Černašejus, Olegas (author) / Škamat, Jelena (author) / Asadauskas, Svajus (author) / Ručinskienë, Alma (author) / Kalpokaitë-Dičkuvienë, Regina (author) / Višniakov, Nikolaj (author)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (958 kB)

Modification of non-metallic inclusions with rare-earth metals in 50CrMoV13-1 steel

Contibutors: Šuler, Blaž (author) / Burja, Jaka (author) / Medved, Jože (author)

1. PDF document (1783 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

An evaluation of the properties of rotor forgings made from 26NiCrMoV115 steel

Contibutors: Balcar, Martin (author) / Turecký, Václav (author) / Sochor, Libor (author) / Fila, Pavel (author) / Martínek, Ludvík (author) / Bažan, Jiří (author) / Němeček, Stanislav (author) / Kešner, Dušan (author)

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (474 kB)

Fatigue properties of sintered DIN SINT-D30 powder metal before and after heat treatment

Contibutors: Šori, Marko (author) / Šuštaršič, Borivoj (author) / Glodež, Srečko (author)

Numbering: 2014, volume 48, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (159 kB)

Simulation of latent-heat thermal storage integrated with room structures

Contibutors: Charvat, Pavel (author) / Mauder, Tomas (author) / Ostry, Milan (author)

Numbering: 2012, volume 46, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (466 kB)

A crack growth analysis in critical structural components

Contibutors: Semenski, Damir (author) / Božić, Željko (author) / Wolf, Hinko (author)

Numbering: 2006, volume 40, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (300 kB)

Effect of the by-pass cement-kiln dust and fluidized-bed-combustion fly ash on the properties of ...

Contibutors: Bílek, Vlastimil (author) / Pařízek, Ladislav (author) / Kalina, Lukáš (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (65 kB)

Fatigue problems of transmission belts:

Contibutors: Emri, Igor (author) / Kramar, Janez (author) / Nikonov, Anatolij (author) / Florjančič, Urška (author) / Hribar, Anton (author)

Determination of the chemical composition and heterogeneity range of highly dense PLZT ceramics b...

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (512 kB)

1. TXT document (14 kB)

Contibutors: Samardžija, Zoran (author) / Marinenko, Ryna B. (author) / Bernik, Slavko (author) / Kosec, Marija (author) / Čeh, Miran (author)

Numbering: 2003, volume 37, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (258 kB)

Assessing the stress fields in an injection-moulded undercut geometry during ejection supported b...

Contibutors: Florjanič, Blaž (author) / Božič, Uroš (author) / Zafošnik, Boštjan (author)

A failure criterion for single-crystal superalloys during thermocyclic loading

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (265 kB)

1. TXT document (26 kB)

Contibutors: Getsov, Leonid (author) / Semenov, Artem (author) / Staroselsky, Alexander (author)

Use of artificial neural networks in ball burnishing process for the prediction of surface roughn...

Numbering: 2008, volume 42, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (515 kB)

1. TXT document (35 kB)

Contibutors: Esme, Ugur (author) / Sagbas, Aysun (author) / Kahraman, Funda (author) / Kulekci, Mustafa Kemal (author)

Numbering: 2008, volume 42, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (237 kB)

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidi...

Contibutors: Yi, Xiaojie (author) / He, Tao (author) / Huo, Yuanming (author) / Chen, Shoushuang (author) / Xu, Yajun (author) / Mahamane Sani, Abdou Yahouza (author)

1. PDF document (1751 kB)

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Laser welding of the new grade of advanced high-strength steel Domex 960

Contibutors: Kurc-Lisiecka, Agnieszka (author) / Lisiecki, Aleksander (author)

1. PDF document (4387 kB)

Numbering: 2017, volume 51, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate

Contibutors: Maretić, Mauro (author) / Smoljan, Božidar (author) / Iljkić, Dario (author)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (948 kB)

Synthesis of a Fe3O4/PAA-based magnetic fluid for faraday-rotation measurements

Contibutors: Kürçükdermenci, Serhat (author) / Kutluay, Deniz (author) / Avgin, Ibrahim (author)

1. PDF document (1345 kB)

Numbering: 2013, volume 47, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Effects of friction-welding parameters on the morphological properties of an Al/Cu bimetallic joint

Contibutors: Milašinović, Veljko D. (author) / Radovanović, Radovan V. (author) / Milašinović, Mijat D. (author) / Gligorijević, Bojan R. (author)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (792 kB)

Corrosion resistance of CrAlVN coatings deposited on PCrNi3Mo steel surfaces with reactive magnet...

Contibutors: Jin, Hao (author) / Li, De-Yuan (author) / Sun, Hai-Jing (author) / Wang, Lei (author) / Guo, Ce-An (author) / Zhang, Gang (author)

1. PDF document (1215 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Structure and properties of AlMgSi alloys after ECAP and POST-ECAP ageing

Contibutors: Fujda, Martin (author) / Matvija, Miloš (author) / Kvačkaj, Tibor (author) / Milkovič, Ondrej (author) / Zubko, Pavol (author) / Nagyová, Katarína (author)

Development of microstructure of steel for thermal power generation

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (259 kB)

1. TXT document (20 kB)

Contibutors: Kvackaj, Tibor (author) / Kuskulic, T. (author) / Fujda, M. (author) / Pokorny, I. (author) / Weiss, M. (author) / Bevilaqua, T. (author)

Possibilities of NUS and impact-echo methods for monitoring steel corrosion in concrete

Numbering: 2007, volume 41, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

1. TXT document (11 kB)

Contibutors: Timčaková-Šamárková, Kristýna (author) / Matysík, Michal (author) / Chobola, Zdeněk (author)

1. PDF document (1342 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of carbon content on the corrosion of MgO-C refractory material caused by acid and ...

Contibutors: Adolf, Zdeněk (author) / Suchánek, Petr (author) / Husar, Ivo (author)

Determination of phosphorus in steel using inductively coupled plasma atomic emission spectrometry

Numbering: 2008, volume 42, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (124 kB)

1. TXT document (11 kB)

Contibutors: Drglin, Tatjana (author)

Numbering: 2005, volume 39, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (135 kB)

Identification of the material parameters of a unidirectional fiber composite using a micromodel

Contibutors: Srbová, Hana (author) / Kroupa, Tomáš (author) / Zemčík, Robert (author)

Influence of structural defects on the magnetic properties of massive amorphous Fesub60Cosub10Mos...

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

1. TXT document (14 kB)

Contibutors: Gondro, Joanna (author) / Bloch, Katarzyna (author) / Nabiałek, Marcin (author) / Garus, Sebastian (author)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (576 kB)

The phenomenon of reduced plasticity in low-alloyed copper

Contibutors: Ozgowicz, Wojciech (author) / Kalinowska-Ozgowicz, Elżbieta (author) / Grzegorczyk, Barbara (author) / Lenik, Klaudiusz (author)

1. PDF document (5127 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Structural characterization of platinum foil for neural stimulating electrodes using a four-point...

Contibutors: Pečlin, Polona (author) / Bizjak, Milan (author) / Pribošek, Marko (author) / Godec, Matjaž (author) / Ribarič, Samo (author) / Rozman, Janez (author)

Effect of copper element on hot behaviour of 304L stainless steel

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (634 kB)

1. TXT document (35 kB)

Contibutors: Li, Juan (author) / Zhao, Guanghui (author) / Ma, Lifeng (author) / Chen, Huiqin (author) / Li, Huaying (author) / Zhang, Wei (author)

1. PDF document (3505 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Research on the quality of the welded joint of aluminium alloy sheet AA6082-T6 using FSW, MIG and...

Contibutors: Šibalić, Nikola (author) / Vukčević, Milan M. (author)

Influence of the tool rotational speed on the microstructure and joint strength of friction-stir ...

Numbering: 2019, volume 53, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (979 kB)

1. TXT document (22 kB)

Contibutors: Dinaharan, Isaac (author) / Akinlabi, Esther T. (author)

1. PDF document (3469 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Effect of stop-hole-induced material removal on the fatigue properties of cracked DT4C steel

Contibutors: Zhang, Chunguo (author) / Liu, Rongwei (author) / Liu, Qiankun (author) / Ren, Cuiping (author)

1. PDF document (2330 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Physicochemical properties of a Ti67 alloy after EO and steam sterilization

Contibutors: Walke, Witold (author) / Basiaga, Marcin (author) / Paszenda, Zbigniew (author) / Marciniak, Jan (author) / Karasinski, Paweł (author)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (938 kB)

Mechanical properties of a novel joint of a single-layer aluminum-alloy combined lattice-shell st...

Contibutors: Zhao, Caiqi (author) / Ma, Jun (author) / Du, Shengchen (author) / Gu, Ye (author) / Zhou, Yunwen (author)

1. PDF document (1819 kB)

Numbering: 2019, volume 53, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

The electrochemical study of duplex stainless steel in chloride solutions

Contibutors: Kocijan, Aleksandra (author) / Donik, Črtomir (author) / Jenko, Monika (author)

The effect of current types on the microstructure and corrosion properties of Ni/nanoAlsub2Osub3 ...

Numbering: 2009, volume 43, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (141 kB)

1. TXT document (16 kB)

Contibutors: Kucharska, Beata (author) / Krawczynska, Agnieszka (author) / Rożniatowski, Krzysztof (author) / Zdunek, Joanna (author) / Poplawski, Karol (author) / Sobiecki, Jerzy Robert (author)

1. PDF document (5584 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

The wet-chemical synthesis of functionalized Znsub{1-x}OMnsubx quantum dots utilizable in optical...

Contibutors: Alizadeh, Mohamad (author) / Salimi, Reza (author) / Sameie, Hassan (author) / Sarabi, Ali Asghar (author) / Alvani, Ali Asghar Sabbagh (author) / Tahriri, Mohammad Reza (author)

The effects of micro and nano CaCo3 on the rheological and physico/mechanical behavior of an SBS/...

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (398 kB)

1. TXT document (13 kB)

Contibutors: Sadeghi, Mohsen (author) / Esfandiari, Amirhossein (author)

A new topology for the trajectories of the meniscus during continuous steel casting

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (785 kB)

1. TXT document (35 kB)

Contibutors: Risteski, Ice B. (author)

Chromite spinel formation in steelmaking slags

Numbering: 2007, volume 41, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

1. TXT document (57 kB)

Contibutors: Burja, Jaka (author) / Tehovnik, Franc (author) / Medved, Jože (author) / Godec, Matjaž (author) / Knap, Matjaž (author)

Effect of holding time on the production of Nb-NbAl3 intermetallic composites via electric-curren...

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (616 kB)

1. TXT document (15 kB)

Contibutors: Aybey, Muhammed (author) / Yener, Tuba (author) / Ipek, Mediha (author) / Zeytin, Sakin (author)

1. PDF document (1282 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (15 kB)

Gelling polysaccharide as the electrolyte matrix in a dye-sensitized solar cell

Contibutors: Bantang, Jose Paolo (author) / Camacho, Drexel (author)

The influence of carbon materials on the properties of MgO refractories

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (890 kB)

1. TXT document (71 kB)

Contibutors: Kuffa, Tarzícius (author) / Sučik, Gabriel (author) / Hršak, Damir (author)

Formation of Ni-Ti intermetallics during reactive sintering at 800-900 °C

Numbering: 2005, volume 39, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (155 kB)

1. TXT document (13 kB)

Contibutors: Novák, Pavel (author) / Vladimír, Vojtěch (author) / Průša, Filip (author) / Pokorný, Petr (author) / Salvetr, Pavel (author) / Knaislová, Anna (author) / Nová, Kateřina (author)

1. PDF document (1498 kB)

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Effects of subzero treatments on the mechanical properties of the SAE 4140 steel

Contibutors: Sahin, Ismail (author) / Höke, Gürhan (author) / Cinici, Hanifi (author) / Findik, Tayfun (author) / Koralay, Haluk (author) / Arabaci, Ugur (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (644 kB)

Effects of extrusion shear on the microstructures and a fracture analysis of a magnesium alloy in...

Contibutors: Hu, Hongjun (author) / Sun, Zhao (author) / Zhang, Dingfei (author)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (988 kB)

Influence of the process parameters on high-velocity oxygen-fuel-sprayed 75Cr3C2-25NiCr coatings

Contibutors: Nagulan, BalaGanesh (author) / Thamilkolundu, SenthilKumar (author) / Murugesan, Chandrasekar (author)

1. PDF document (1417 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Numerical and experimental analyses of the delamination of cross-ply laminates

Contibutors: Zemčík, Robert (author) / Laš, Vladislav (author)

Effect of the aggregate type on the properties of alkali-activated slag subjected to high tempera...

Numbering: 2008, volume 42, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (158 kB)

1. TXT document (16 kB)

Contibutors: Rovnaník, Pavel (author) / Dufka, Ámos (author)

1. PDF document (1134 kB)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of the carbide-particle spheroidisation process on the microstructure after the quenchi...

Contibutors: Dlouhý, Jaromír (author) / Hauserova, Daniela (author) / Nový, Zbyšek (author)

1. PDF document (1464 kB)

Numbering: 2016, volume 50, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (14 kB)

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Polymer-matrix-bonded polyester fibers as a substitute for materials used for the cores of vacuum...

Contibutors: Zach, Jiří (author) / Novák, Vítězslav (author)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (349 kB)

Effect of ZrOsub2 additions on fabrication of ZrOsub2/Mg composites via friction-stir processing

Contibutors: Chen, Hongmei (author) / Li, Xiaowen (author) / Liao, Si'en (author) / Zhang, Jing (author) / Jin, Yunxue (author) / Cui, Hongwei (author)

1. PDF document (1536 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Numerical simulation of the progressive damage to FRC panels due to shock loading

Contibutors: Zemčík, Robert (author) / Laš, Vladislav (author)

Isothermal oxidation behavior of electrospark deposited NiCrAlY coatings on a Ni-based single-cry...

Numbering: 2005, volume 39, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (632 kB)

1. TXT document (16 kB)

Contibutors: Guo, Cean (author) / Liang, Ting (author) / Lu, Fengsheng (author) / Liang, Zhengang (author) / Zhao, Shuang (author) / Zhang, Jian (author)

1. PDF document (1642 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Stability of close-cell Al foams depending on the usage of different foaming agents

Contibutors: Paulin, Irena (author)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (998 kB)

Estimation of the boron diffusion coefficients in FeB and Fe2B layers during the pack-boriding of...

Contibutors: Abdellah, Zahra Nait (author) / Keddam, Mourad (author)

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (208 kB)

A metallographic examination of a fractured connecting rod

Contibutors: Celin, Roman (author) / Arzenšek, Boris (author) / Kmetič, Dimitrij (author)

Comparative mechanical and corrosion studies on magnesium, zinc and iron alloys as biodegradable ...

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (288 kB)

1. TXT document (10 kB)

Contibutors: Vojtěch, Dalibor (author) / Kubásek, Jiří (author) / Čapek, Jaroslav (author) / Pospíšilová, Iva (author)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (719 kB)

Presentation methods of textures measurements

Contibutors: Godec, Matjaž (author) / Jenko, Monika (author)

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (517 kB)

Possibilities of determining the air-pore content in cement composites using computed tomography ...

Contibutors: Moravcová, Bronislava (author) / Pőssl, Petr (author) / Misák, Petr (author) / Blažek, Michal (author)

1. PDF document (1771 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Structural, mechanical and cytotoxicity characterization of as-cast biodegradable Zn-xMg (x = 0.8...

Contibutors: Kubásek, Jiří (author) / Pospíšilová, Iva (author) / Vojtěch, Dalibor (author) / Jablonská, Eva (author) / Ruml, Tomáš (author)

1. PDF document (2038 kB)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

The influence of cooling rate on the microstructure of an Al-Mn-Be alloy

Contibutors: Rozman, Niko (author) / Bončina, Tonica (author) / Anžel, Ivan (author) / Zupanič, Franc (author)

Numbering: 2008, volume 42, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (140 kB)

The implementation of an online mathematical model of slab reheating in a pusher-type furnace

Contibutors: Jaklič, Anton (author) / Vode, Franci (author) / Robič, Roman (author) / Perko, Franci (author) / Strmole, Branko (author) / Novak, Jani (author) / Triplat, Jožef (author)

Numbering: 2005, volume 39, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (269 kB)

Creep behaviour of a short-fibre C/PPS composite

Contibutors: Fíla, Tomáš (author) / Koudelka, Petr (author) / Kytýř, Daniel (author) / Hos, Jíří (author) / Šleichrt, Jan (author)

1. PDF document (1464 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Fatigue behaviour of a cast nickel-based superalloy Inconel 792-5A at 700 degree C

Contibutors: Petrenec, Martin (author) / Obrtlík, Karel (author) / Polák, Jaroslav (author) / Kruml, Tomáš (author)

Numbering: 2006, volume 40, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (333 kB)

Degradation of VOC´s by a two stage thermal and high frequency DBDC system

Contibutors: Godoy-Cabrera, O.G. (author) / Mercado-Cabrera, A. (author) / López-Callejas, Regulo (author) / Valencia A., R. (author) / Barocio, S.R. (author) / Muňoz-Castro, A.E. (author) / Peňa-Eguiluz, R. (author) / Piedad-Beneitez, A. de la (author)

Numbering: 2006, volume 40, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (692 kB)

Development of low-Si aluminum casting alloys with an improved thermal conductivity

Contibutors: Shin, Jesik (author) / Ko, Sehyun (author) / Kim, Kitae (author)

Influence of MnS inclusions on the corrosion of austenitic stainless steels

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (392 kB)

1. TXT document (36 kB)

Contibutors: Donik, Črtomir (author) / Paulin, Irena (author) / Jenko, Monika (author)

Numbering: 2010, volume 44, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (309 kB)

Analysis of the fiber distribution, size, and volume ratio of unidirectional composite plates wit...

Contibutors: Zemčík, Robert (author) / Srbová, Hana (author) / Ekštein, Kamil (author) / Pirner, Ivan (author) / Medlín, Rostislav (author)

1. PDF document (5357 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Synthesis of cobalt-alloyed ZnS quantum dots and investigation of their characteristics

Contibutors: Horoz, Sabit (author)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (444 kB)

Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy

Contibutors: Shi, Dequan (author) / Kang, Kaijiao (author) / Gao, Guili (author)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (625 kB)

Microstructural changes of fine-grained concrete exposed to a sulfate attack

Contibutors: Vyšvařil, Martin (author) / Bayer, Patrik (author) / Rovnaníková, Markéta (author)

1. PDF document (4312 kB)

Numbering: 2015, volume 49, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Optimum bushing length in thermal drilling of galvanized steel using artificial neural network co...

Contibutors: Hynes, Navasingh Rajesh Jesudoss (author) / Kumar, Ramar (author) / Sujana, Jebaraj Angela Jennifa (author)

1. PDF document (2122 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (86 kB)

Implicit numerical multidimensional heat-conduction algorithm parallelization and acceleration on...

Contibutors: Pohanka, Michal (author) / Ondrouskova, Jana (author)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (339 kB)

Computer tools to determine physical parameters in wooden houses

Contibutors: Bečkovský, David (author) / Vajkay, František (author) / Tichomirov, Vladimír (author)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (604 kB)

HR AES and XPS investigations of Fe-Si-B powders

Contibutors: Mandrino, Djordje (author) / Godec, Matjaž (author) / Jenko, Monika (author) / Prešern, Vasilij (author)

Numbering: 2001, volume 35, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Residual stresses in shot-peened sheets of AlMg4.5Mn alloy

Contibutors: Mišović, Mitar (author) / Tadić, Nebojša (author) / Ćulafić, Zoran (author) / Jelić, Miloš (author)

Numbering: 2002, volume 36, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (163 kB)

Investigation of the adhesion and wear properties of borided AISI H10 steel

Contibutors: Gunes, Ibrahim (author) / Ozcatal, Melih (author)

1. PDF document (2407 kB)

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Electron-optical and Auger electron spectroscopy studies of a zirconium conversion coating on alu...

Contibutors: Adesoji Adediran, Adeolu (author) / Oki, Makanjuola (author) / Akintola, Sarah Abidemi (author) / Ogunsemi, Bamidele (author) / Akinlabi, Esther T. (author)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (897 kB)

A spectrophotometric determination of boron in aluminium and aluminium alloys

Contibutors: Drglin, Tatjana (author) / Naglič, Iztok (author)

Numbering: 2003, volume 37, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (68 kB)

Control of reduction of continuous slab casting with a thermal model

Contibutors: Stetina, Jozef (author) / Ramik, Pavel (author) / Katolicky, Jaroslav (author)

Numbering: 2015, volume 49, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (819 kB)

Towards the optimum spinal fusion device

Contibutors: Gorenšek, Matevž (author) / Jenko, Monika (author) / Kocjančič, Boštjan (author) / Dolinar, Drago (author) / Brulc, Urban (author)

Effects of deformation temperature on the microstructure and mechanical properties of the AA3003 ...

Numbering: 2018, volume 52, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (585 kB)

1. TXT document (20 kB)

Contibutors: Chen, Guiqing (author) / Fu, Gaosheng (author) / Lin, Xiaodong (author) / Song, Lili (author) / Cheng, Chaozeng (author) / Wei, Tianyun (author)

1. PDF document (1199 kB)

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Surface behavior of AISI 4140 modified with the pulsed-plasma technique

Contibutors: Özbek, Yildiz Yarali (author) / Durman, Mehmet (author)

1. PDF document (1450 kB)

Numbering: 2015, volume 49, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The influence of adding emulsion flocculants on the effects of red-mud sedimentation

Contibutors: Smolović, Dejan (author) / Vukčević, Mira (author) / Blečić, Dragoljub (author)

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (995 kB)

Effects of heat inputs on the structure of Ni-based amorphous composite coatings applied with las...

Contibutors: Li, Ruifeng (author) / Chen, Zhaohui (author) / Gu, Jiayang (author) / Wang, Yuxin (author) / Wu, Mingfang (author) / Tian, Yingtao (author)

1. PDF document (1624 kB)

Numbering: 2019, volume 53, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the electromagnetic compound field on the grain growth and wear resistance of a Cu-Pb m...

Contibutors: Li, Ziyang (author) / Yu, Ting (author) / Wang, Dongxin (author) / Geng, Guihong (author)

1. PDF document (1895 kB)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Modeling of calmodulin-mediated processes in tissues using calmodulin-functionalized gold nanopar...

Contibutors: Chubinidze, Ketevan (author) / Partsvania, Besarion (author) / Khuskivadze, Alexandre (author) / Burnadze, Paata (author) / Petriashvili, Gia (author) / Dzidziguri, Diana (author) / Mukbaniani, Omari V. (author)

Numbering: 2020, volume 54, iss. 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)