dLib.si - Univerza v Ljubljani, Fakulteta za strojništvo

Influence of local porosity on the mechanical properties of direct metal laser-sintered 1.2709 alloy

S-gear design rules

Contibutors: Hlebanja, Jože (author) / Hlebanja, Gorazd (author) / Umberger, Mark (author)

Source: Ventil (Ljubljana)

Numbering: 2020, volume 26, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (893 kB)

1. TXT document (41 kB)

Contibutors: Hatos, István (author) / Fekete, Imre (author) / Harangozó, Dóra (author) / Hargitai, Hajnalka (author)

1. PDF document (1816 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Convective drying of sewage sludge layer in through-flow

Contibutors: Lipolt, Andraž (author) / Širok, Brane (author) / Hočevar, Marko (author) / Novak, Lovrenc (author)

1. PDF document (1268 kB)

Numbering: 2020, volume 66, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (56 kB)

A new design solution for aircraft wheels that reduces overpressure in the tire while retaining i...

Contibutors: Petrovic, Dalibor (author) / Dodić, Marjan (author) / Kapor, Nenad J. (author)

Research on the lubrication characteristics of harmonic gear transmission meshing areas

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (647 kB)

1. TXT document (34 kB)

Contibutors: Xu, Xiangyang (author) / Fan, Xianfeng (author) / Wei, Peitang (author) / Yang, Baojun (author)

1. PDF document (1397 kB)

Numbering: 2020, volume 66, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Enhancing the optimization of the selection of a product service system scheme

Contibutors: Li, Yan (author) / Li, Lianhui (author)

3D FE modelling of machining forces during AISI 4140 hard turning

Numbering: 2020, volume 66, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (572 kB)

1. TXT document (41 kB)

Contibutors: Tzotzis, Anastasios (author) / García-Hernández, César (author) / Huertas-Talón, José-Luis (author) / Kyratsis, Panagiotis (author)

1. PDF document (3279 kB)

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Dynamic instability of a wind turbine blade due to large deflections

Contibutors: Lopez-Lopez, Andres (author) / Robles-Ocampo, Jose Billerman (author) / Sevilla-Camacho, Perla Yasmin (author) / Lastres-Danguillecourt, Orlando (author) / Muniz, Jesús (author) / Perez-Sarinana, Bianca Yadira (author) / Cruz, Sergio de la (author)

1. PDF document (1916 kB)

Numbering: 2020, volume 66, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Comparative analysis of static and dynamic performance of nonpneumatic tire with flexible spoke s...

Contibutors: Zhang, Zifeng (author) / Fu, Hongxun (author) / Liang, Xuemeng (author) / Chen, Xiaoxia (author) / Tan, Di (author)

1. PDF document (3687 kB)

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Needleless electrospinning of PA6 fibers

Contibutors: Aulova, Alexandra (author) / Bek, Marko (author) / Kossovich, Leonid (author) / Emri, Igor (author)

1. PDF document (1244 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Characterization of the bonding zone in AZ91/AlSi12 bimetals fabricated by liquid-solid compound ...

Contibutors: Mola, Renata (author) / Bucki, Tomasz (author)

1. PDF document (7897 kB)

Numbering: 2020, volume 66, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Temperature and heat partition testing in the cutting zone for turning AISI 321 steel

Contibutors: Bartoszuk, Marian (author)

1. PDF document (1545 kB)

Numbering: 2020, volume 66, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Fundamentals of odour assessment in Slovenia

Contibutors: Dobeic, Martin (author) / Butala, Vincenc (author) / Prek, Matjaž (author) / Leskovšek, Jan (author) / Švegelj, Žiga (author)

1. PDF document (2984 kB)

Numbering: 2020, volume 66, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Effect of thermal barrier coating on the thermal stress of gas microturbine blades and nozzles

Contibutors: Tenango-Pirin, Oscar (author) / Reynoso-Jardón, Elva (author) / García, Juan Carlos (author) / Mariaca, Yahir (author) / Hernández, Yuri Sara (author) / Neco, Raúl (author) / Dávalos, Omar (author)

1. PDF document (1351 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

A loaded analysis method for RV cycloidal-pin transmission based on the minimum energy principle

Contibutors: Li, Tianxing (author) / Xu, Hang (author) / Tian, Meng (author)

1. PDF document (2068 kB)

Numbering: 2020, volume 66, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Research on a noise reduction method based on DTCWT and the cyclic singular energy difference spe...

Contibutors: Chen, Xihui (author) / Cheng, Gang (author) / Liu, Ning (author) / Shi, Xinhui (author) / Lou, Wei (author)

1. PDF document (1663 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Research on the performance of a new external occlusion device for pressure vessel leakage

Contibutors: Yan, Hongwei (author) / Yang, Xiong (author) / Hou, Xiangrong (author) / Wang, Lu (author) / Li, Pengcheng (author)

1. PDF document (2076 kB)

Numbering: 2020, volume 66, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Effect of blade coating on a centrifugal pump operation under sediment-laden water flow

Contibutors: Wang, Yong (author) / Zhang, Zilong (author) / Chen, Jie (author) / Liu, Houlin (author) / Zhang, Xiang (author) / Hočevar, Marko (author)

1. PDF document (4129 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Thermodynamic analysis of a cascade heat pump incorporated in high-temperature heating system

Contibutors: Rudonja, Nedžad (author) / Gojak, Milan (author) / Zlatanović, Ivan (author) / Todorović, Ružica (author)

1. PDF document (1044 kB)

Numbering: 2020, volume 66, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (25 kB)

How to experimentally monitor the fatigue behaviour of vibrating mechanical systems?

Contibutors: Cianetti, Filippo (author)

1. PDF document (1029 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Numerical study of stress analysis for the different widths of padding welds

Contibutors: Kulawik, Adam (author) / Wróbel, Joanna (author)

1. PDF document (4831 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Prediction of strain limits via the Marciniak-Kuczynski model and a novel semi-empirical forming ...

Contibutors: Kacar, Ilyas (author) / Ozturk, Fahrettin (author) / Toros, Serkan (author) / Kilic, Suleyman (author)

1. PDF document (1136 kB)

Numbering: 2020, volume 66, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Preliminary comparison of the performance of thermodynamic models of the subsonic ejector and tur...

Contibutors: Martinaitis, Vytautas (author) / Rimdžius, Dovydas (author) / Bielskus, Juozas (author) / Streckiene, Giedre (author) / Motuziene, Violeta (author)

1. PDF document (1424 kB)

Numbering: 2020, volume 66, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Internal friction of ball bearings at very low temperatures

Contibutors: Sikorski, Jakub (author) / Pawlowski, Witold (author)

1. PDF document (2997 kB)

Numbering: 2020, volume 66, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

An experimental and numerical investigation of an improved shearing process with different punch ...

Contibutors: Gomah, Mahmod (author) / Demiral, Murat (author)

1. PDF document (1323 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Heat dissipation from stationary passenger car brake discs

Contibutors: Topouris, Stergios (author) / Stamenković, Dragoslav (author) / Olphe-Galliard, Michel (author) / Popović, Vladimir (author) / Tirovic, Marko (author)

1. PDF document (4200 kB)

Numbering: 2020, volume 66, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Experimental identification of optimized process parameters for FSW of AZ91C Mg alloy using quadr...

Contibutors: Satheesh, Chidambaram (author) / Sevvel, Pandian (author) / Senthil Kumar, R. (author)

1. PDF document (7404 kB)

Numbering: 2020, volume 66, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (51 kB)

RBF neural network sliding mode control method based on backstepping for an electro-hydraulic act...

Contibutors: Li, Wending (author) / Shi, Guanglin (author) / Chunjiang, Zhao (author) / Liu, Hongyu (author) / Fu, Junyong (author)

1. PDF document (3361 kB)

Numbering: 2020, volume 66, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Influence of wear and tool geometry on the chatter, cutting force, and surface integrity of TB6 t...

Contibutors: Liu, Jianyong (author) / Sun, Jianfei (author) / Zaman, Uzair Khaleeq uz (author) / Chen, Wuyi (author)

1. PDF document (3857 kB)

Numbering: 2020, volume 66, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

Plough-extrusion forming for making micro-groove heat pipes on hydrostatic thrust bearings of hea...

Contibutors: Li, Xibing (author) / Yu, Zhe (author) / Li, Xizhao (author) / Li, Weixiang (author) / Zou, Tengyue (author)

1. PDF document (1345 kB)

Numbering: 2020, volume 66, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (43 kB)

Single-step heat treatment for the restoration of the mechanical properties of cold-strained mini...

Contibutors: Lojen, Gorazd (author) / Mayer, Janez (author) / Bončina, Tonica (author) / Zupanič, Franc (author)

1. PDF document (3815 kB)

Numbering: 2020, volume 66, iss. 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Analogue experimental study of fiber formation on two-wheel spinner

Contibutors: Bizjan, Benjamin (author) / Širok, Brane (author) / Blagojevič, Marko (author)

1. PDF document (1612 kB)

Numbering: 2020, volume 66, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A cyber-physical approach to the management and control of manufacturing systems

Contibutors: Hozdić, Elvis (author) / Kozjek, Dominik (author) / Butala, Peter (author)

1. PDF document (3096 kB)

Numbering: 2020, volume 66, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A transient feature learning-based intelligent fault diagnosis method for planetary gearboxes

Contibutors: Qin, Bo (author) / Li, Zixian (author) / Qin, Yan (author)

1. PDF document (4550 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Peak temperature correlation and temperature distribution during joining of AZ80A Mg alloy by FSW

Contibutors: Sevvel, Pandian (author) / Babu, S. D. Dhanesh (author) / Kumar, R. Senthil (author)

1. PDF document (3954 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Pitch stability analysis for mechanical-hydraulic-structural-fluid coupling system of high-lift h...

Contibutors: Zhang, Yang (author) / Shi, Duanwei (author) / Xiao, Tong (author) / Zhou, Ji (author) / Cheng, Xionghao (author)

1. PDF document (1509 kB)

Numbering: 2020, volume 66, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

The influence of machining parameters on the surface porosity of a closed-cell aluminium foam

Contibutors: Razboršek, Boštjan (author) / Gotlih, Janez (author) / Karner, Timi (author) / Ficko, Mirko (author)

1. PDF document (8269 kB)

Numbering: 2020, volume 66, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Quality of the surface texture and mechanical properties of FDM printed samples after thermal and...

Contibutors: Kozior, Tomasz (author) / Mamun, Al (author) / Trabelsi, Marah (author) / Sabantina, Lilia (author) / Ehrmann, Andrea (author)

Numbering: 2020, volume 66, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (801 kB)

Experimental investigation of the micro-hardness of EN-31 die steel in a powder-mixed near-dry el...

Contibutors: Sundriyal, Sanjay (author) / Vipin, Vipin (author) / Walia, Ravinderjit Singh (author)

1. PDF document (1747 kB)

Numbering: 2020, volume 66, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Experimental analysis of process parameter effects on vibrations in the high-speed grinding of a ...

Contibutors: Liu, Tao (author) / Deng, Zhaohui (author) / Lv, Lishu (author) / She, Shuailong (author) / Liu, Wei (author) / Luo, Chengyao (author)

1. PDF document (3507 kB)

Numbering: 2020, volume 66, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Transient flow of liquid in plastic pipes

Contibutors: Urbanowicz, Kamil (author) / Duan, Huan-Feng (author) / Bergant, Anton (author)

1. PDF document (1988 kB)

Numbering: 2020, volume 66, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (57 kB)

Overheating reduction in lightweight framed buildings with application of phase change materials

Contibutors: Zavrl, Eva (author) / Zupanc, Gašper (author) / Stritih, Uroš (author) / Dovjak, Mateja (author)

Control system for a tensile-testing device using low-cost hardware and open-source software

Numbering: 2020, volume 66, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (889 kB)

1. TXT document (51 kB)

Contibutors: Kranjec, Matej (author) / Korinšek, Jernej (author) / Ambrož, Miha (author) / Kunc, Robert (author)

1. PDF document (1348 kB)

Numbering: 2020, volume 66, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Microstructure and property modification of cold sprayed coatings using different grain sizes of ...

Contibutors: Trelka, Anna (author) / Żórawski, Wojciech (author) / Góral, Anna (author)

1. PDF document (3337 kB)

Numbering: 2020, volume 66, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Effect of gangue distributions on cutting force and specific energy in coal cutting

Contibutors: Jiang, Kao (author) / Gao, Kuidong (author) / Wan, Lirong (author)

Evaluation of clogged hydropower plant trash rack losses

Numbering: 2020, volume 66, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (675 kB)

1. TXT document (35 kB)

Contibutors: Hribernik, Aleš (author)

1. PDF document (3178 kB)

Numbering: 2020, volume 66, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Experimental investigations of thin-layer drying of leaves in a heat-pump assisted tray-type batc...

Contibutors: Babu, A. K. (author) / Kumaresan, G. (author) / Antony Aroul Raj, V. (author) / Velraj, R. (author)

Mechanism research and discussion of the quality of precision machining of a fifth-order variable...

Numbering: 2020, volume 66, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (954 kB)

1. TXT document (48 kB)

Contibutors: Li, Junye (author) / Wang, Lixiong (author) / Zhang, Hengfu (author) / Hu, Jinglei (author) / Zhang, Xinming (author) / Zhao, Weihong (author)

1. PDF document (2835 kB)

Numbering: 2020, volume 66, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Study on the influence of metallic powder in near-dry electric discharge machining

Contibutors: Sundriyal, Sanjay (author) / Vipin, Vipin (author) / Walia, Ravinderjit Singh (author)