dLib.si - search results

1. PDF document (2818 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Surface defect detection on power transmission belts using laser profilometry

Contibutors: Bračun, Drago (author) / Perdan, Boštjan (author) / Diaci, Janez (author)

1. PDF document (1293 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (31 kB)

Computation of stress intensity factor in functionally graded plates under thermal shock

Contibutors: Nazari, Mohammad Bagher (author) / Shariati, Mahmoud (author) / Eslami, Mohammad Reza (author) / Hassani, Behrooz (author)

1. PDF document (1069 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Pipistrel Taurus G4

Contibutors: Tomažič, Tine (author) / Plevnik, Vid (author) / Veble, Gregor (author) / Tomažič, Jure (author) / Popit, Franc (author) / Kolar, Sašo (author) / Kikelj, Rado (author) / Langelaan, Jacob W. (author) / Miles, Kirk (author)

1. PDF document (3039 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The formation of saw toothed chip in a titanium alloy

Contibutors: Alvarez, Roberto (author) / Domingo, Rosario (author) / Sebastian, Miguel Angel (author)

1. PDF document (1150 kB)

Numbering: 2011, volume 57, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Development of a part-complexity evaluation model for application in additive fabrication technol...

Contibutors: Valentan, Bogdan (author) / Brajlih, Tomaž (author) / Drstvenšek, Igor (author) / Balič, Jože (author)

1. PDF document (1088 kB)

Numbering: 2011, volume 57, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Validation of a flexible multibody belt-drive model

Contibutors: Čepon, Gregor (author) / Manin, Lionel (author) / Boltežar, Miha (author)

1. PDF document (3034 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Measuring dynamic loads on a foldable city bicycle

Contibutors: Pirnat, Miha (author) / Savšek, Zdenko (author) / Boltežar, Miha (author)

1. PDF document (1241 kB)

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Energy saving cooling-unit for plastic moulding machine

Contibutors: Lovrec, Darko (author) / Tič, Vito (author)

1. PDF document (1252 kB)

Numbering: 2011, volume 57, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Study of weak electric current emissions on cement mortar under uniaxial compressional mechanical...

Contibutors: Kyriazopoulos, Antonios (author) / Stavrakas, Ilias (author) / Anastasiadis, Cimon (author) / Triantis, Dimos (author)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (349 kB)

Investigation on the high vacuum tribological characteristics of surface treated nuclear grade st...

Contibutors: Devaraju, Ayyannan (author) / Elayaperumal, Ayyasamy (author) / Venugopal, Srinivasan (author) / Kailas, Satish V. (author) / Alphonsa, Joseph (author)

1. PDF document (2403 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Fatigue failure study of the lower suspension vehicle arm using a multiaxial criterion of the str...

Contibutors: Saoudi, Abdelhamid (author) / Bouazara, Mohamed (author) / Marceau, Daniel (author)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (765 kB)

Rotating-mirror Q-switched Er:YAG laser for optodynamic studies

Contibutors: Bizjak, Aleš (author) / Nemeš, Karolj (author) / Možina, Janez (author)

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (796 kB)

Numerical methods for TMF cycle modeling

Contibutors: Zaletelj, Henrik (author) / Fajdiga, Gorazd (author) / Nagode, Marko (author)

1. PDF document (1523 kB)

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

CW fiber laser for second harmonic generation

Contibutors: Novak, Vid (author) / Petkovšek, Rok (author) / Podobnik, Boštjan (author) / Možina, Janez (author)

1. PDF document (1182 kB)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Overall structure calibration of 3-UCR parallel manipulator based on quaternion method

Contibutors: Cheng, Gang (author) / Gu, Wei (author) / Yu, Jing-li (author) / Tang, Ping (author)

1. PDF document (1379 kB)

Numbering: 2011, volume 57, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Nonlinear approach to thin-walled beams with a symmetrical open section

Contibutors: Anđelić, Nina (author)

Simulating nonlinear materials under centrifugal forces by using intelligent cross-linked simulat...

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (562 kB)

1. TXT document (24 kB)

Contibutors: Hackenschmidt, Reinhard (author) / Alber-Laukant, Bettina (author) / Rieg, Frank (author)

1. PDF document (2423 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (20 kB)

Lockin-interferometry

Contibutors: Menner, Philipp (author) / Gerhard, Henry (author) / Busse, Gerd (author)

1. PDF document (1276 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Influence of input parameters on the characteristics of the EDM process

Contibutors: Shabgard, Mohammadreza (author) / Seyedzavvar, Mirsadegh (author) / Oliaei, Samad Nadimi Bavil (author)

1. PDF document (1787 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (21 kB)

Application of ultrasonic C-scan techniques for tracing defects in laminated composite materials

Contibutors: Hasiotis, Theodoros (author) / Badogiannis, Efstratios (author) / Tsouvalis, Nicolaos Georgios (author)

1. PDF document (4352 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

Electromagnetic nondestructive evaluation

Contibutors: Grimberg, Raimond (author)

1. PDF document (2976 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

The effect of electroless Ni coating of SiC particles on the corrosion behavior of A356 based squ...

Contibutors: Dikici, Burak (author) / Tekmen, Cagri (author) / Gavgali, Mehmet (author) / Cocen, Umit (author)

1. PDF document (3175 kB)

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

On the particles size distributions of diatomaceous earth and perlite granulations

Contibutors: Petrović, Dragan (author) / Mitrović, Časlav (author) / Trišović, Nataša (author) / Golubović, Zorana Z. (author)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (753 kB)

Theoretical analysis of stiffness constant and effective mass for a round-folded beam in MEMS acc...

Contibutors: Wong, Wai Chi (author) / Azid, Ishak Abdul (author) / Majlis, Burhanuddin Yeop (author)

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (689 kB)

Fatigue life analysis of aluminum wheels by simulation of rotary fatigue test

Contibutors: Wang, Liangmo (author) / Chen, Yufa (author) / Wang, Chenzhi (author) / Wang, Qingzheng (author)

1. PDF document (1936 kB)

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Study of adaptive model parameter estimation for milling tool wear

Contibutors: Xu, Chuangwen (author) / Xu, Ting (author) / Zhu, Qi (author) / Zhang, Hongyan (author)

1. PDF document (1429 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Electromagnetic imaging using probe arrays

Contibutors: Mook, Gerhard (author) / Michel, Fritz (author) / Simonin, Jouri (author)

1. PDF document (3541 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Shaping of face toothing in flat spiroid gears

Contibutors: Staniek, Roman (author)

1. PDF document (1742 kB)

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Integrated design for fatigue life estimation of structures

Contibutors: Akrache, Radouane (author) / Lu, Jian (author)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (919 kB)

Comparison between elastic-perfectly-plastic interfacial free-edge and crack tip singular fields

Contibutors: Marsavina, Liviu (author) / Nurse, Andrew D. (author)

FE-modeling of cold rolling by in-feed method of circular grooves

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (841 kB)

1. TXT document (19 kB)

Contibutors: Niţu, Eduard (author) / Iordache, Monica (author) / Marincei, Luminiţa (author) / Charpentier, Isabelle (author) / Le Coz, Gaël (author) / Ferron, Gérard (author) / Ungureanu, Ion (author)

1. PDF document (1538 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

New opportunities for NDT using non-linear interaction of elastic waves with defects

Contibutors: Solodov, Igor (author) / Döring, Daniel (author) / Busse, Gerd (author)

1. PDF document (2131 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Length variation of toothed belt during exploitation

Contibutors: Stojanović, Blaza (author) / Miloradović, Nenad (author) / Marjanović, Nenad (author) / Blagojević, Mirko (author) / Ivanović, Lozica (author)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (983 kB)

Simulation of water-gas shift membrane reactor for integrated gasification combined cycle plant w...

Contibutors: Lotrič, Andrej (author) / Sekavčnik, Mihael (author) / Kunze, Christian (author) / Spliethoff, Hartmut (author)

Focus variation - a robust technology for high resolution optical 3D surface metrology

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (974 kB)

1. TXT document (47 kB)

Contibutors: Danzl, Reinhard (author) / Helmli, Franz (author) / Scherer, Stefan (author)

1. PDF document (3031 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A study of quality parameters and behaviour of self-piercing riveted aluminium sheets with differ...

Contibutors: Mucha, Jacek (author)

1. PDF document (2362 kB)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Interrelation between ERP modification and modification scheduling

Contibutors: Čelar, Stipe (author) / Mudnić, Eugen (author) / Gotovac, Sven (author)

System approach to vehicle suspension system control in CAE environment

Numbering: 2011, volume 57, issue 1

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (355 kB)

1. TXT document (15 kB)

Contibutors: Popović, Vladimir (author) / Vasić, Branko (author) / Petrović, Miloš (author) / Mitić, Saša (author)

Numbering: 2011, volume 57, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (828 kB)

The influence of chip breaker geometry on tool stresses in turning

Contibutors: Gurbuz, Huseyin (author) / Kurt, Abdullah (author) / Ciftci, Ibrahim (author) / Seker, Ulvi (author)

Numbering: 2011, volume 57, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (965 kB)

Criticality analysis of the elements of the light commercial vehicle steering tie-rod joint

Contibutors: Ćatić, Dobrivoje (author) / Jeremić, Branislav (author) / Djordjević, Zorica (author) / Miloradović, Nenad (author)

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (957 kB)

Aspects of using tool axis inclination angle

Contibutors: Sadílek, Marek (author) / Čep, Robert (author) / Budak, Igor (author) / Soković, Mirko (author)

1. PDF document (1927 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (19 kB)

Experimental equipment research for cryogenic Joule-Thompson cryocoolers comparison in IR technol...

Contibutors: Sicovic, Aleksandar (author) / Milinovic, Momčilo (author) / Jeremic, Olivera (author)

1. PDF document (2062 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Structural analysis of an articulated urban bus chassis via FEM

Contibutors: Croccolo, Dario (author) / De Agostinis, Massimiliano (author) / Vincenzi, Nicolo (author)

1. PDF document (3333 kB)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

NDT based process monitoring and control

Contibutors: Wolter, Bernd (author) / Dobmann, Gerd (author) / Boller, Christian (author)

1. PDF document (1201 kB)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (29 kB)

Application of numerical simulations in the deep-drawing process and the holding system with segm...

Contibutors: Volk, Mihael (author) / Nardin, Blaž (author) / Dolšak, Bojan (author)

1. PDF document (2613 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Real-time cutting tool condition monitoring in milling

Contibutors: Čuš, Franc (author) / Župerl, Uroš (author)

Application of Promethee-Gaia methodology in the choice of systems for drying paltry-seeds and po...

Numbering: 2011, volume 57, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (994 kB)

1. TXT document (29 kB)

Contibutors: Prvulović, Slavica (author) / Tolmać, Dragiša (author) / Radovanović, Ljiljana (author)

Optimal control of workpiece thermal state in creep-feed grinding using inverse heat conduction a...

Numbering: 2011, volume 57, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (866 kB)

1. TXT document (21 kB)

Contibutors: Gostimirović, Marin (author) / Sekulić, Milenko (author) / Kopač, Janez (author) / Kovač, Pavel (author)

1. PDF document (1399 kB)

Numbering: 2011, volume 57, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Monitoring gas metal arc welding process by using audible sound signal

Contibutors: Horvat, Jožef (author) / Prezelj, Jurij (author) / Polajnar, Ivan (author) / Čudina, Mirko (author)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (821 kB)

1. TXT document (32 kB)

Virtual engine

Contibutors: Pistek, Vaclav (author) / Novotny, Pavel (author)

1. PDF document (2198 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Melt volume flow measurement in the mineral-wool production process

Contibutors: Chen, Jinpeng (author) / Hočevar, Marko (author) / Širok, Brane (author)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (549 kB)

Implementation of automatic identification technology in a process of fixture assembly/disassembly

Contibutors: Ostojić, Gordana (author) / Stankovski, Stevan (author) / Vukelić, Djordje (author) / Lazarević, Milovan (author) / Hodolič, Janko (author) / Tadic, Branko (author) / Odri, Stevan (author)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (695 kB)

Possibilities of using three-dimensional optical scanning in complex geometrical inspection

Contibutors: Brajlih, Tomaž (author) / Tasič, Tadej (author) / Drstvenšek, Igor (author) / Valentan, Bogdan (author) / Hadžistević, Miodrag (author) / Pogačar, Vojko (author) / Balič, Jože (author) / Ačko, Bojan (author)

1. PDF document (1986 kB)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

FPGA-based control system of an ultrasonic phased array

Contibutors: Santos, Mário Joao Simoes Ferreira dos (author) / Santos, Jaime Batista dos (author)

Numbering: 2011, volume 57, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (672 kB)

Surface integrity after mechanical hardening of various aluminium alloys

Contibutors: Žagar, Sebastjan (author) / Grum, Janez (author)

1. PDF document (2659 kB)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Global optimization of lateral performance for two-post ROPS based on the Kriging model and genet...

Contibutors: Wang, Jixin (author) / Yao, Mingyao (author) / Yang, Yonghai (author)

1. PDF document (1052 kB)

Numbering: 2011, volume 57, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Numerical modelling of crack growth in a gear tooth root

Contibutors: Podrug, Srđan (author) / Glodež, Srečko (author) / Jelaska, Damir (author)

1. PDF document (1382 kB)

Numbering: 2011, volume 57, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A methodology for quantifying the kinematic position errors due to manufacturing and assembly tol...

Contibutors: Flores, Paulo (author)

Signal model-based fault detection and diagnosis for induction motors using features of vibration...

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (607 kB)

1. TXT document (34 kB)

Contibutors: Do, Van Tuan (author) / Chong, Ui-Pil (author)

1. PDF document (1148 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Influence of the milling strategy on the durability of forging tools

Contibutors: Pahole, Ivo (author) / Studenčnik, Dejan (author) / Gotlih, Karl (author) / Ficko, Mirko (author) / Balič, Jože (author)

1. PDF document (1280 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Numerical prediction of non-cavitating and cavitating vortex rope in a Francise turbine draft tube

Contibutors: Jošt, Dragica (author) / Lipej, Andrej (author)

1. PDF document (1868 kB)

Numbering: 2011, volume 57, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Modeling techniques of nested helical structure based geometry for numerical analysis

Contibutors: Erdönmez, Cengiz (author) / Imrak, Cevat Erdem (author)

1. PDF document (1335 kB)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (26 kB)

Polycrystalline cubic boron nitride (PCBN) tool life and wear in turning of amorphous-crystalline...

Contibutors: Tanović, Ljubodrag (author) / Bojanić, Pavao (author) / Puzovic, Radovan (author) / Klimenko, Sergey (author)

1. PDF document (1476 kB)

Numbering: 2011, volume 57, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (24 kB)

Sustainability assessment

Contibutors: Pušavec, Franci (author) / Kopač, Janez (author)

1. PDF document (1046 kB)

Numbering: 2011, volume 57, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Optimization of trapezoidal cross section of the truck crane boom by Lagrange's multipliers and b...

Contibutors: Gašić, Milomir M. (author) / Savković, Mile M. (author) / Bulatović, Radovan R. (author)

Numbering: 2011, volume 57, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (743 kB)

Calculation of the combined torsional mesh stiffness of spur gears with two- and three-dimensiona...

Contibutors: Kiekbusch, Tomo (author) / Sappok, Daniel (author) / Sauer, Bernd (author) / Howard, Ian (author)

1. PDF document (1745 kB)

Numbering: 2011, volume 57, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

The influence of airflow inlet region modifications on the local efficiency of natural draft cool...

Contibutors: Dvoršek, Matjaž (author) / Hočevar, Marko (author) / Širok, Brane (author) / Holeček, Nikola (author) / Donevski, Božin (author)