Digitalna knjižnica Slovenije

1. PDF document (3359 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Application of laserspeckleinterferometry to fracture mechanical investigations of bonds and non ...

Contibutors: Junghans, Eva (author) / Dobi, Djordje (author)

1. PDF document (1205 kB)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. TXT document (27 kB)

Primerjava lastnosti toplotno vplivanega področja večvarkovnega zvara na jeklu Nionicral 70 pri d...

Contibutors: Gliha, Vladimir (author) / Toplak, Darko (author)

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (834 kB)

Vpliv vibriranja med varjenjem in po njem na mehanske lastnosti zvarov, zavarjenih v zaščiti močn...

Contibutors: Pučko, Bogdan (author)

Numbering: 2000, volume 46, issue 11/12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (204 kB)

The influence of buffer layer on the properties of surface welded joint of high-carbon steel

Contibutors: Popović, Olivera (author) / Prokić-Cvetković, Radica (author) / Sedmak, Aleksandar (author) / Buyukyildrim, Galip (author) / Bukvić, Aleksandar (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (290 kB)

Impact toughness of WMD after MAG welding with micro-jet cooling

Contibutors: Wegrzyn, Tomasz (author) / Piwnik, Jan (author) / Borek, Aleksander (author) / Kurc-Lisiecka, Agnieszka (author)

1. PDF document (1055 kB)

Numbering: 2016, volume 50, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of multi-pass weld build-up on weld-metal toughness / Vpliv gradnje večvarkovnega zvara na...

Contibutors: Rojko, Danilo (author) / Gliha, Vladimir (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (187 kB)

Relationship between a bainitic structure and the hardness in the weld zone of the friction-stir ...

Contibutors: Aydin, Hakan (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (623 kB)

Determination of the tensile properties of specimens with small dimensions

Contibutors: Dobi, Djordje (author) / Junghans, Eva (author)

An investigation of the economics of using welded layers for some parts of worm presses for the e...

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (257 kB)

1. TXT document (27 kB)

Contibutors: Marušić, Vlatko (author) / Kljajin, Milan (author) / Marušić, Sanja (author)

Numbering: 2009, volume 43, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (416 kB)

Molecular dynamics simulation of Ti-6Al-4V diffusion bonding behavior under different process par...

Contibutors: Liu, Xiaogang (author) / Xu, Lei (author) / Zhang, Sun (author)

1. PDF document (4917 kB)

Numbering: 2020, volume 54, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (34 kB)

The transferability of fracture-mechanics parameters to fracture performance evaluation of welds ...

Contibutors: Toyoda, Masao (author) / Praunseis, Zdravko (author)

Vakuumsko tesni laserski zvari za hermetično inkapsulacijo elektronskih sestavnih delov

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (803 kB)

1. TXT document (36 kB)

Contibutors: Spruk, Sonja (author) / Jenko, M. (author) / Koller, Lidija (author) / Railič, D. (author)

Metallographic characterization of the joining part for the EN 10216-1 and EN 10083-3 made with d...

Numbering: 1993, volume 27, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (470 kB)

1. TXT document (12 kB)

Contibutors: Štrekelj, Neva (author) / Lampič, Marko (author) / Kosec, Ladislav (author) / Markoli, Boštjan (author)

Numbering: 2010, volume 44, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (546 kB)

The effect of a material's heterogeneity on the stress and strain distribution in the vicinity of...

Contibutors: Kozak, Dražan (author) / Gubeljak, Nenad (author) / Vojvodič-Tuma, Jelena (author)

Numbering: 2007, volume 41, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (577 kB)

Safe operation of welded structure with cracks at elevated temperature

Contibutors: Burzić, Meri (author) / Prokić-Cvetković, Radica (author) / Grujić, Biljana (author) / Atanasovska, Ivana (author) / Adamović, Živoslav Ž. (author)

Numbering: 2008, volume 54, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (315 kB)

Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel

Contibutors: Bauer, Branko (author) / Topić, Angela (author) / Kralj, Slobodan (author) / Kožuh, Zoran (author)

Friction-stir welding of aluminium alloy 5083

Numbering: 2011, volume 45, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (688 kB)

1. TXT document (29 kB)

Contibutors: Klobčar, Damjan (author) / Kosec, Ladislav (author) / Pietras, Adam (author) / Smolej, Anton (author)

Numerical and experimental investigation of the effect of hydrostatic pressure on the residual st...

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (321 kB)

1. TXT document (22 kB)

Contibutors: Danyali, Daryoush (author) / Ranjbarnodeh, Eslam (author)

1. PDF document (1403 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of activated flux and nitrogen addition on the bead geometry of borated stainless-steel GT...

Contibutors: Guttikonda, Raja Kumar (author) / Gabbita, Durga Janaki Ram (author) / Rao, Rama Koteswara (author)

1. PDF document (1941 kB)

Numbering: 2016, volume 50, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Neugodne mikrostrukturne sestavine v zvarnih spojih konstrukcijskih jekel

Contibutors: Gerdun, Viktor (author) / Godec, Boštjan (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (686 kB)

Pulzno varjenje konstrukcijskih jekel

Contibutors: Kejžar, Rajko (author) / Kejžar, Uroš (author)

Source: RMZ-materials and geoenvironment

Numbering: 2007, volume 54, issue 1

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta
(Obvezni izvod spletne publikacije)

1. PDF document (444 kB)

1. TXT document (30 kB)

The corrosion behaviour of ferritic stainless steels in alkaline solutions

Contibutors: Kocijan, Aleksandra (author)

Numbering: 2010, volume 44, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (134 kB)

Točkovno talilno varjenje z oplaščeno elektrodo z ugreznjenim oblokom

Contibutors: Tušek, Janez (author) / Celin, Roman (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (272 kB)

Effect of the tool geometry and welding parameters on the macrostructure, fracture mode and weld ...

Contibutors: Bilici, Mustafa Kemal (author) / Yükler, Ahmet Ýrfan (author) / Kastan, Alim (author)

Numbering: 2014, volume 48, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (860 kB)

Fracture toughness of a high-strength low-alloy steel weldment

Contibutors: Vojvodič-Tuma, Jelena (author) / Gubeljak, Nenad (author) / Šuštaršič, Borivoj (author) / Bundara, Borut (author)

Numbering: 2006, volume 40, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (503 kB)

Effect of heat treatment on the microstructure and mechanical properties of martensitic stainless...

Contibutors: Calik, Adnan (author) / Karakaş, Mustafa Serdar (author)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (688 kB)

Povezanost pojava površinskih razpok na nerjavni debeli pločevini z vrednostmi feritnih števil in...

Contibutors: Pohar, Cveto (author) / Klinar, Milan (author) / Kosmač, Alenka (author)

Varivostni preizkus z vstavkom na konstrukcijskem jeklu z nizkim PspodajCM

Numbering: 2004, volume 38, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (147 kB)

1. TXT document (30 kB)

Contibutors: Gliha, Vladimir (author) / Vuherer, Tomaž (author) / Rak, Inoslav (author)

Fatigue properties of a high-strength-steel welded joint

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (247 kB)

1. TXT document (27 kB)

Contibutors: Burzić, Zijah (author) / Grabulov, Vencislav (author) / Sedmak, Stojan (author) / Sedmak, Aleksander (author)

The brittle tensile fracture and cleavage strength of a structural steel with a simulated weld-af...

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (122 kB)

1. TXT document (14 kB)

Contibutors: Kosec, Gorazd (author) / Arzenšek, Boris (author) / Vojvodič-Tuma, Jelena (author) / Vodopivec, Franc (author)

Numbering: 2009, volume 43, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (286 kB)

Modificirano numerično modeliranje lomnega vedenja zvarnega spoja v prehodnem področju iz duktiln...

Contibutors: Kozak, Dražan (author) / Gubeljak, Nenad (author) / Rak, Inoslav (author)

Numbering: 1998, volume 32, issue 5

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (167 kB)

Accelerated creep testing of new creep resisting weld metals

Contibutors: Mandziej, Stan T. (author) / Výrostková, A. (author) / Šolar, Mojca (author)

1. PDF document (1166 kB)

Numbering: 2008, volume 42, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Optimization of the process parameters of friction-welded St-Al joints

Contibutors: Sahin, Mumin (author) / Misirli, Cenk (author) / Selvi, Selcuk (author)

1. PDF document (3412 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Influence of non-metallic inclusions on the formation of hot cracks in the weld and heat-affected...

Contibutors: Zorc, Borut (author) / Imamović, Mustafa (author) / Kosec, Ladislav (author) / Kosec, Borut (author) / Nagode, Aleš (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (417 kB)

Vpliv varovalne atmosfere na kvaliteto laserskih zvarov (1995, volume 29, issue 1/2)

Vakuumsko tesni laserski zvari

Contibutors: Spruk, Sonja (author) / Jenko, M. (author) / Koller, Lidija (author) / Railić, D. (author)

Source: Vakuumist

Numbering: 1992, issue 1

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (683 kB)

1. TXT document (10 kB)

Contibutors: Spruk, Sonja (author) / Koller, Lidija (author) / Praček, Borut (author) / Mozetič, Miran (author) / Jenko, M. (author)

The high-temperature characterisation of welded joints using small-punch testing

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (439 kB)

1. TXT document (11 kB)

Contibutors: Milička, Karel (author) / Dobeš, Ferdinand (author)

1. PDF document (4720 kB)

Numbering: 2004, volume 38, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

An experimental verification of numerical models for the fracture and fatigue of welded structures

Contibutors: Sedmak, Stojan (author) / Sedmak, Aleksander (author) / Arsić, Miodrag (author) / Vojvodič-Tuma, Jelena (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (361 kB)

Experimental study and analysis of the wear properties of friction-stir-welded AA7075-T6 and A384...

Contibutors: Anganan, Karuppannan (author) / Prabagaran, Subramaniam (author) / Muthukrishnan, Mayakrishnan (author)

1. PDF document (1027 kB)

Numbering: 2018, volume 52, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Prediction of the nugget size in resistance spot welding with a combination of a finite-element a...

Contibutors: Afshari, Davood (author) / Sedighi, Mohammad (author) / Karimi, Mohammad Reza (author) / Barsoum, Zuheir (author)

Numbering: 2014, volume 48, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (365 kB)

Varjenje vakuumskih komponent iz nerjavnega jekla

Contibutors: Drab, Marjan (author)

Source: Vakuumist

Numbering: 1992, issue 28

Provider: Društvo za vakuumsko tehniko Slovenije

1. PDF document (799 kB)

1. TXT document (13 kB)

Vpliv reparaturnih zvarov na lastnosti zvarnega spoja

Contibutors: Vuherer, Tomaž (author) / Rojko, Danilo (author) / Gliha, Vladimir (author)

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (323 kB)

Investigation of the effect of temper condition on the friction-stir weldability of AA7075 Al-all...

Contibutors: Ipekoglu, Güven (author) / Kiral, Binnur Gören (author) / Erim, Seçil (author) / Çam, Gürel (author)

1. PDF document (3154 kB)

Numbering: 2012, volume 46, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

DP780 dual-phase-steel spot welds

Contibutors: Pouranvari, Majid (author) / Marashi, Seyed Pirooz Hoveida (author) / Jaber, Hassanen Latef (author)

Numbering: 2015, volume 49, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (825 kB)

Failure mode of M130 martensitic steel resistance-spot welds

Contibutors: Pouranvari, Majid (author) / Mousavizadeh, Seyed Mostafa (author)

Numbering: 2013, volume 47, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (734 kB)

Microstructure and properties of the high-temperature (HAZ) of thermo-mechanically treated S700MC...

Contibutors: Górka, Jacek (author)

1. PDF document (3973 kB)

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Primerjava lomne žilavosti TVP, izmerjene pri dveh vrstah majhnih preizkušancev

Contibutors: Gliha, Vladimir (author) / Vuherer, Tomaž (author) / Ule, Boris (author) / Vojvodič-Tuma, Jelena (author)

Thermal analysis on a weld joint of aluminium alloy in gas metal arc welding

Numbering: 2000, volume 34, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (203 kB)

1. TXT document (18 kB)

Contibutors: Ismail, M. I. S. (author) / Afieq, W. M. (author)

Source: Advances in production engineering and management

Numbering: 2016, volume 11, issue 1

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (3775 kB)

Mikrostruktura laserskih zvarov kovin in zlitin za elektroniko

Contibutors: Spruk, Sonja (author) / Jenko, Monika (author) / Koller, Lidija (author) / Rodič, Alenka (author) / Kosec, Ladislav (author)

Experimental analysis of crack initiation and growth in welded joint of steel for elevated temper...

Numbering: 1994, volume 28, issue 1/2

Provider: Narodna in univerzitetna knjižnica

1. PDF document (485 kB)

1. TXT document (10 kB)

Contibutors: Burzić, Meri (author) / Adamović, Živoslav Ž. (author)

1. PDF document (2429 kB)

Numbering: 2008, volume 42, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Dinamična trdnost materiala na prehodu temena vara pri zvarnem spoju na visokotrdnem konstrukcijs...

Contibutors: Gliha, Vladimir (author)

Numbering: 2000, volume 34, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (201 kB)

Characterization of heterogeneous arc welds through miniature tensile testing and Vickers-hardnes...

Contibutors: Hertelé, Stjin (author) / Bally, Jonas (author) / Gubeljak, Nenad (author) / Štefane, Primož (author) / Verleysen, Patricia (author) / De Waele, Wim (author)

Microstructure evolution and statistical analysis of Al/Cu friction-stir spot welds

Numbering: 2016, volume 50, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (798 kB)

1. TXT document (18 kB)

Contibutors: Mubiayi, Mukuna Patrick (author) / Akinlabi, Esther T. (author) / Makhatha, Mamookho Elizabeth (author) / Gadeev, Dmitry (author)

1. PDF document (1864 kB)

Numbering: 2017, volume 51, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (61 kB)

Vloga in nastanek mikrostrukturnih sestavin M-A v zvarnih spojih maloogljičnih visokotrdnostnih k...

Contibutors: Praunseis, Zdravko (author) / Toyoda, Masao (author) / Križman, Alojz (author) / Ohata, Mitsuru (author)

Numbering: 2001, volume 35, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (986 kB)

Vpliv popravil na mikrostrukturo zvarov jekla Niomol 490K

Contibutors: Celin, Roman (author) / Tušek, Janez (author)

Numbering: 2000, volume 34, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (604 kB)

The behaviour of coarse-grain HAZ steel with small defects during cycling loading

Contibutors: Gliha, Vladimir (author) / Vuherer, Tomaž (author)

Določevanje hitrosti širjenja utrujenostne razpoke v zvarnem spoju pri majhnih prirastkih

Numbering: 2007, volume 41, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (429 kB)

1. TXT document (23 kB)

Contibutors: Predan, Jožef (author) / Gubeljak, Nenad (author) / Oblak, Maks (author) / Legat, Janko (author)

Numbering: 2002, volume 36, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (187 kB)

The tensile behaviour of friction-stir-welded dissimilar aluminium alloys

Contibutors: Palanivel, R. (author) / Mathews, P. Koshy (author)

Numbering: 2011, volume 45, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (518 kB)

Vedenje WP-preizkušanca pri utrujanju

Contibutors: Gliha, Vladimir (author) / Rojko, Danilo (author)

Mehanske lastnosti zvara iz jekla maraging po izločevalnem žarjenju

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (222 kB)

1. TXT document (23 kB)

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author)

Numbering: 2007, volume 41, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (645 kB)

Root-cause analysis of superheater-tube failure

Contibutors: Nad', Martin (author) / Buzík, Jiří (author) / Létal, Tomáš (author) / Lošák, Pavel (author)

1. PDF document (2200 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of the GMAW metal-transfer mode on the weld-metal structure of HSLA X80

Contibutors: Jurica, Maja (author) / Kožuh, Zoran (author) / Bauer, Branko (author) / Garašić, I. (author)

1. PDF document (1150 kB)

Numbering: 2017, volume 51, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Lasersko podprto merjenje oblike zvarov

Contibutors: Bračun, Drago (author) / Možina, Janez (author)

O premeni avstenita pri ohlajanju zvarov jekla Niomol 490 K

Numbering: 2001, volume 35, issue 1/2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (105 kB)

1. TXT document (11 kB)

Contibutors: Vodopivec, Franc (author) / Kosec, Gorazd (author) / Grbić, Stanko (author) / Kmetič, Dimitrij (author)

Numbering: 2004, volume 38, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (407 kB)

A creep-properties evaluation of P91 steel weldments using short-term testing

Contibutors: Šturm, Roman (author) / Jenko, Monika (author) / Ule, Boris (author)

Role of residual stresses on fracture properties of under-matched butt weld

Numbering: 2002, volume 36, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (434 kB)

1. TXT document (22 kB)

Contibutors: Rak, Inoslav (author) / Gliha, Vladimir (author)

Numbering: 1999, volume 33, issue 6

Provider: Inštitut za kovinske materiale in tehnologije

1. PDF document (111 kB)

Contibutors: Marashi, Seyed Pirooz Hoveida (author)

1. PDF document (1089 kB)

Numbering: 2016, volume 50, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (22 kB)

Mikrovarjenje s trenjem in mešanjem bakrenih kontaktov

Contibutors: Klobčar, Damjan (author) / Tušek, Janez (author) / Bizjak, Milan (author) / Lešer, Vladka (author)

Source: Ventil (Ljubljana)

Numbering: 2014, volume 20, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (925 kB)

Root weld metal impact toughness of an energy component

Contibutors: Salamunić, Julijan Jan (author)

1. PDF document (1175 kB)

Numbering: 2018, volume 11, iss. 1

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

Fracture toughness of HSLA welds made on penstock material

Contibutors: Praunseis, Zdravko (author)

1. PDF document (2467 kB)

Numbering: 2019, volume 12, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

The influence of delta ferrite on the quality assessment of austenitic stainless steel welds for ...

Contibutors: Praunseis, Zdravko (author)

1. PDF document (1838 kB)

Numbering: 2020, volume 13, iss. 1

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

Fracture evaluation of energy components with local brittle zones

Contibutors: Praunseis, Zdravko (author)

1. PDF document (1113 kB)

Numbering: 2013, volume 6, iss. 1

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

Fractografic examination of welds strength mismatching

Contibutors: Praunseis, Zdravko (author) / Avsec, Jurij (author) / Marčič, Simon (author)

1. PDF document (1050 kB)

Numbering: 2013, volume 6, iss. 2

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Determination of local brittle zones at the crack front in the HAZ of welded joint

Contibutors: Praunseis, Zdravko (author) / Mlakar, Marko (author) / Novak, Sonja (author)

Ultrasonic detection of defects in steel welds

Numbering: 2015, volume 8, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (920 kB)

1. TXT document (18 kB)

Contibutors: Pešić, Marko (author) / Nikolić, Irena (author) / Praunseis, Zdravko (author)

1. PDF document (1152 kB)

Numbering: 2016, volume 9, iss. 3

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. TXT document (12 kB)

Study on the correction of S-N distribution in the welding fatigue analysis method based on the b...

Contibutors: Sun, Yibo (author) / Yang, Xinhua (author)

1. PDF document (2023 kB)

Numbering: 2014, volume 60, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Evaluation of the influence of upset stage on joint properties of friction welded dissimilar alum...

Contibutors: Barlas, Zafer (author) / Çolak, Murat (author)

1. PDF document (1515 kB)

Numbering: 2014, volume 60, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Creep resistance of microstructure of welds of creep resistant steels

Contibutors: Vodopivec, Franc (author) / Jenko, Monika (author) / Celin, Roman (author) / Žužek, Borut (author) / Skobir Balantič, Danijela Anica (author)

Numbering: 2011, volume 45, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (110 kB)

Monitoring gas metal arc welding process by using audible sound signal

Contibutors: Horvat, Jožef (author) / Prezelj, Jurij (author) / Polajnar, Ivan (author) / Čudina, Mirko (author)

Numbering: 2011, volume 57, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (821 kB)

Fatigue life analysis of crane K-type welded joints based on non-linear cumulative damage theory

Contibutors: Cai, Fuhai (author) / Wang, Xin (author) / Liu, Jiquan (author) / Fuling, Zhao (author)

1. PDF document (3371 kB)

Numbering: 2014, volume 60, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (38 kB)

Implantna trdnost treh ogljikovih konstrukcijskih jekel

Contibutors: Vuherer, Tomaž (author) / Gliha, Vladimir (author) / Vavpotič, Anton (author)

Study of droplet transfer characteristics and weld formation with ER430LNb ferritic stainlessstee...

Numbering: 2003, volume 37, issue 3/4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (196 kB)

1. TXT document (17 kB)

Contibutors: Liu, Feng (author) / Gu, Yu (author) / Chen, Lian (author) / Xu, Fanghong (author) / Zhang, Han (author) / Xu, Shaowei (author) / Yan, Zhihang (author) / Yan, Zhifeng (author) / Wang, Wenxian (author)

1. PDF document (4283 kB)

Numbering: 2023, volume 57, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

Effect of different application pressures on rotary-friction-welded AA2024-T6 joints

Contibutors: Apay, Serkan (author) / Özen, Fatih (author) / Onar, Volkan (author)

1. PDF document (2118 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

The constitution of the welded joint in the GX4CrNi13-4 stainless steel

Contibutors: Markoli, Boštjan (author) / Spaić, Savo (author)

Source: RMZ-materials and geoenvironment

Numbering: 2003, volume 50, issue 3

Provider: Univerza v Ljubljani, Naravoslovnotehniška fakulteta

1. PDF document (538 kB)

1. TXT document (20 kB)

Fatigue life prediction of butt weld joint with weld defects at multiple locations

Contibutors: Gnanasigamony Thankareathenam, Ebron Shaji (author) / Venugopal, Prabhu Raja (author) / Velayudhan, Gautham (author) / Selvakumar, Mohanraj (author)

1. PDF document (1334 kB)

Numbering: 2022, volume 68, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Žilavost osnovnega materiala in zvarov P91

Contibutors: Kabacki, Fikret (author) / Acarer, Mustafa (author) / Keskinkiliç, Selçuk (author) / Acar, Filiz Kumdali (author)

Source: Livarski vestnik

Numbering: 2017, volume 64, issue 3

Provider: Društvo livarjev Slovenije

1. PDF document (1220 kB)

Stress analysis and numerical simulation study of cold metal transfer weld head

Contibutors: Li, Mei (author) / Yang, Fu (author) / Wei, Xiaolong (author) / Jia, Zheng (author)

1. PDF document (2252 kB)

Numbering: 2026, volume 60, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Optimizing weld quality in dissimilar stainless steel joints for industrial applications

Contibutors: Selvamuthukumaran, D. (author) / Uvaraja, V. C. (author)

1. PDF document (4746 kB)

Numbering: 2025, volume 59, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (46 kB)

Enhanced mechanical performance and refined intermetallic layer in underwater friction-stir-welde...

Contibutors: Kannan, Pattanam Ramamoorthy (author) / Premkumar, N. (author) / Arul, M. (author) / Dinesh, S. (author)