Digitalna knjižnica Slovenije

Effects of cutting parameters and tool-path strategies on tool acceleration in ball-end milling

Numbering: 2012, volume 46, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (193 kB)

1. TXT document (14 kB)

Contibutors: Gok, Arif (author) / Gök, Kadir (author) / Bilgin, Mehmet Burak (author) / Alkan, Mehmet Ali (author)

1. PDF document (1380 kB)

Numbering: 2017, volume 51, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (79 kB)

Določitev parametrov enofaznega transfrmatorja s pomočjo diferenčne evolucije

Contibutors: Slokan, Ervin (author) / Štumberger, Gorazd (author)

Source: Elektrotehniški vestnik

Numbering: 2016, volume 83, issue 1/2

Provider: Elektrotehniška zveza Slovenije
(Obvezni izvod spletne publikacije)

1. PDF document (446 kB)

1. TXT document (25 kB)

Optimization of the process parameters for dry-sliding wear of an Al 2219-SiCp composite using th...

Contibutors: Ganesh, Radhakrishnan (author) / Chandrasekaran, Kesavan (author) / Ameen, Mohammed (author) / Kumar, Raja Pavan (author)

1. PDF document (1200 kB)

Numbering: 2014, volume 48, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Optimiranje značilnih parametrov frezanja z uporabo razvojne tehnike optimizacije jate delcev

Contibutors: Župerl, Uroš (author) / Čuš, Franc (author) / Gečevska, Valentina (author)

Optimising the effect of cutting parameters on the average surface roughness in a turning process...

Numbering: 2007, volume 53, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (670 kB)

1. TXT document (51 kB)

Contibutors: Akkuş, Harun (author)

Optimization of machining parameters in turning of hybrid aluminium-matrix (LM24-SiCp-coconut she...

Numbering: 2018, volume 52, issue 6

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (287 kB)

1. TXT document (22 kB)

Contibutors: Arulraj, Munusamy (author) / Ponnusamy, Kumaraswamy Palani (author) / Venkatesh, Lakshmikanthan (author)

Kombiniran sistem ločenega optimiranja in prilagodnega nastavljanja rezalnih parametrov med proce...

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (880 kB)

1. TXT document (31 kB)

Contibutors: Župerl, Uroš (author) / Čuš, Franc (author) / Kiker, Edvard (author) / Milfelner, Matjaž (author)

1. PDF document (1479 kB)

Numbering: 2005, volume 51, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. TXT document (60 kB)

Optimization of the turning parameters for the cutting forces in the Hastelloy X superalloy based...

Contibutors: Altin, Abdullah (author)

Optimization of the machining parameters in the electrochemical micro-machining of nickel

Numbering: 2014, volume 48, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (230 kB)

1. TXT document (26 kB)

Contibutors: Krishnan, Rajendiran (author) / Duraisamy, Saravanan (author) / Palanisamy, Parthiban (author) / Veeramani, Anandakrishnan (author)

Optimization of the machining parameters for the turning of 15-5 PH stainless steels using the Ta...

Numbering: 2018, volume 52, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (503 kB)

1. TXT document (27 kB)

Contibutors: Çetin, Şerif (author) / Kivak, Turgay (author)

1. PDF document (1238 kB)

Numbering: 2017, volume 51, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Modeling and experimental analysis of Al2219/n-TiC/Gr powder-based process parameters using desir...

Contibutors: Jeevanantham, Ponnusamy (author) / Kumaresan, Krishnasamy (author) / Noorbasha, Zeelanbasha (author)

1. PDF document (3913 kB)

Numbering: 2018, volume 52, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (27 kB)

Optimization of the process parameters of friction-welded St-Al joints

Contibutors: Sahin, Mumin (author) / Misirli, Cenk (author) / Selvi, Selcuk (author)

1. PDF document (3412 kB)

Numbering: 2019, volume 53, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Predictive model and optimization of processing parameters for plastic injection moulding

Contibutors: Kramar, Davorin (author) / Cica, Djordje (author)

Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning...

Numbering: 2017, volume 51, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (514 kB)

1. TXT document (32 kB)

Contibutors: Tamang, S. K. (author) / Chandrasekaran, Margam (author)

Source: Advances in production engineering and management

Numbering: 2015, volume 10, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (943 kB)

1. TXT document (47 kB)

Optimizacija procesnih parametrov pri kontinuiranem ulivanju jekla v železarni ACRONI Jesenice (1997, volume 31, issue 5)

Contibutors: Filipič, Bogdan (author) / Šarler, Božidar (author)

Source: Kovine zlitine tehnologije

Provider: Narodna in univerzitetna knjižnica

1. PDF document (1033 kB)

1. TXT document (25 kB)

Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the GRA-Ta...

Contibutors: Kolli, Murahari (author) / Adepu, Kumar (author)

Optimization of the drilling parameters for the cutting forces in B4C-reinforced Al-7XXX-series a...

Numbering: 2016, volume 50, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (730 kB)

1. TXT document (48 kB)

Contibutors: Taşkesen, Ahmet (author) / Kütükde, Kenan (author)

Application of optimization techniques to determine parameters of the Vibe combustion model

Numbering: 2013, volume 47, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (596 kB)

1. TXT document (33 kB)

Contibutors: Prah, Ivo (author) / Katrašnik, Tomaž (author)

Numbering: 2009, volume 55, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo

1. PDF document (392 kB)

Determination of the mechanical parameters of a bonded joint between a metal and a composite by c...

Contibutors: Bernardin, Petr (author) / Vacík, Josef (author) / Kroupa, Tomáš (author) / Kottner, Radek (author)

1. PDF document (1021 kB)

Numbering: 2013, volume 47, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (14 kB)

Optimization of multi-process parameters according to the surface quality criteria in the end mil...

Contibutors: Durmuş, Hülya (author)

Optimization of the process parameters for surface roughness and tool life in face milling using ...

Numbering: 2012, volume 46, issue 4

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (498 kB)

1. TXT document (26 kB)

Contibutors: Sarikaya, Murat (author) / Dilipak, Hakan (author) / Gezgin, Akin (author)

Optimization of process parameters for machining of Al 7075 thin-walled structures

Numbering: 2015, volume 49, issue 1

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. PDF document (902 kB)

1. TXT document (39 kB)

Contibutors: Borojević, S. (author) / Lukic, Dejan (author) / Milošević, Miloš (author) / Vukman, J. (author) / Kramar, Davorin (author)

Source: Advances in production engineering and management

Numbering: 2018, volume 13, issue 2

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1929 kB)

1. TXT document (38 kB)

Experimental investigation for the optimization of the WEDM process parameters to obtain the mini...

Contibutors: Jayachandran, Shanthi (author) / Raman, Mohan (author) / Ramasamy, Thangavelu (author)

1. PDF document (1860 kB)

Numbering: 2019, volume 53, issue 3

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Optimization of control parameters for servo hydraulic systems using genetic algorithms

Contibutors: Šitum, Željko (author) / Ciković, Zoran (author)

Source: Ventil (Ljubljana)

Numbering: 2014, volume 20, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (815 kB)

1. TXT document (18 kB)

The optimization options of water supply systems in terms of energy consumption

Contibutors: Žagar, Ivan (author)

Source: JET on-line
Journal of energy technology

Numbering: 2014, volume 7, iss. 4

Provider: Univerza v Mariboru, Fakulteta za energetiko
(Obvezni izvod spletne publikacije)

1. PDF document (1480 kB)

Multi-response optimization of GTAW process parameters in terms of energy efficiency and quality

Contibutors: Van, An-Le (author) / Nguyen, Thai-Chung (author) / Bui, Huu-Toan (author) / Dang, Xuan-Ba (author) / Nguyen, Trung Thanh (author)

1. PDF document (1390 kB)

Numbering: 2024, volume 70, issue 5/6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Multi-objective optimization of the dressing parameters in fine cylindrical grinding

Contibutors: Stefanova Aleksandrova, Irina (author)

1. PDF document (7050 kB)

Numbering: 2019, volume 65, issue 2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (65 kB)

Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel

Contibutors: Bhatia, Anmol (author) / Wattal, Reeta (author)

1. PDF document (2581 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

The optimization of machining parameters using the Taguchi method for surface roughness of AISI 8...

Contibutors: Motorcu, Ali Riza (author)

Numbering: 2010, volume 56, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (233 kB)

Thermal optimization and comparison of geometric parameters of rectangular and triangular fins wi...

Contibutors: Bunjaku, Florent (author) / Filkoski, Risto V. (author) / Sahiti, Naser (author)

Biohydrogen production from simple carbohydrates with optimization of operating parameters

Numbering: 2017, volume 63, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (560 kB)

1. TXT document (28 kB)

Contibutors: Muri, Petra (author) / Osojnik Črnivec, Ilja Gasan (author) / Djinović, Petar (author) / Pintar, Albin (author)

Source: Acta chimica slovenica

Numbering: 2016, volume 63, issue 1

Provider: Slovensko kemijsko društvo
(Obvezni izvod spletne publikacije)

1. PDF document (779 kB)

1. TXT document (48 kB)

Multi-objective optimization of the resistance spot-welding process parameters for the welding of...

Contibutors: Djuric, Aleksija (author) / Milčić, Dragan (author) / Klobčar, Damjan (author) / Marković, Biljana (author)

1. PDF document (2770 kB)

Numbering: 2021, volume 55, issue 2

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (1 kB)

Optimization of electroporation parameters for delivery of small molecules into primary human myo...

Contibutors: Pavlin, Mojca (author) / Kandušer, Maša (author) / Škorja, Nives (author) / Pirkmajer, Sergej (author)

Source: Zbornik mednarodne Elektrotehniške in računalniške konference

Numbering: 2019,

Provider: Slovenska sekcija IEEE
(Obvezni izvod spletne publikacije)

1. PDF document (528 kB)

1. TXT document (21 kB)

Impact of Cobot parameters on the worker productivity: Optimization challenge (2022, volume 17, issue 4)

Contibutors: Javernik, Aljaž (author) / Buchmeister, Borut (author) / Ojsteršek, Robert (author)

Source: Advances in production engineering and management

Provider: Univerza v Mariboru, Fakulteta za strojništvo, Inštitut za proizvodno strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (1628 kB)

1. TXT document (38 kB)

Optimization of process parameters for a solid-state-welded AlSl 430 steel joint with the GRG rei...

Contibutors: Senthilkumar, G. (author) / Vinodkumar, V. (author) / Mayavan, T. (author) / Rathinasabapathi, G. (author) / David, Amos Gamaleal (author)

1. PDF document (2319 kB)

Numbering: 2023, volume 57, issue 5

Provider: Inštitut za kovinske materiale in tehnologije
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Optimization of laser parameters and dimple geometry using PCA-coupled gRG

Contibutors: Kandasamy Ganesan, Saravanan (author) / Thanigaivelan, Rajasekaran (author)

Investigation and optimization of MQL system parameters in the roller-burnishing process of harde...

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (916 kB)

1. TXT document (34 kB)

Contibutors: Van, An-Le (author) / Nguyen, Trung Thanh (author)

1. PDF document (2173 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Statistical modelling and optimization of TIG welding process parameters using Taguchi’s method

Contibutors: Omprakasam, S. (author) / Marimuthu, Kathiresan (author) / Raghu, R. (author) / Velmurugan, T. (author)

1. PDF document (4659 kB)

Numbering: 2022, volume 68, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Optimization of abrasive waterjet cutting by using the CODAS method with regard to interdependent...

Contibutors: Perec, Andrzej (author) / Kawecka-Wyrzykowska, Elżbieta (author) / Radomska-Zalas, Aleksandra (author) / Pude, Frank (author)

1. PDF document (2458 kB)

Numbering: 2023, volume 69, issue 9/10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Effect of laser parameters on surface texture of polyformaldehyde and parameter optimization

Contibutors: Li, Fengren (author) / Li, Chao (author) / Zhou, Juan (author) / He, Jiantao (author) / Wang, Jiebin (author) / Luo, Cong (author) / Li, Si (author)